The patches for 3.0.0pre6.
[rsync/rsync-patches.git] / flags.diff
index 6bfabb1..8ad65fc 100644 (file)
@@ -8,8 +8,9 @@ To use this patch, run these commands for a successful build:
     ./configure
     make
 
---- old/compat.c
-+++ new/compat.c
+diff --git a/compat.c b/compat.c
+--- a/compat.c
++++ b/compat.c
 @@ -44,6 +44,7 @@ extern int protocol_version;
  extern int protect_args;
  extern int preserve_uid;
@@ -36,9 +37,10 @@ To use this patch, run these commands for a successful build:
        if (preserve_acls && !am_sender)
                acls_ndx = ++file_extra_cnt;
        if (preserve_xattrs)
---- old/configure.in
-+++ new/configure.in
-@@ -544,7 +544,7 @@ AC_CHECK_FUNCS(waitpid wait4 getcwd strd
+diff --git a/configure.in b/configure.in
+--- a/configure.in
++++ b/configure.in
+@@ -551,7 +551,7 @@ AC_CHECK_FUNCS(waitpid wait4 getcwd strdup chown chmod lchmod mknod mkfifo \
      memmove lchown vsnprintf snprintf vasprintf asprintf setsid glob strpbrk \
      strlcat strlcpy strtol mallinfo getgroups setgroups geteuid getegid \
      setlocale setmode open64 lseek64 mkstemp64 mtrace va_copy __va_copy \
@@ -47,8 +49,9 @@ To use this patch, run these commands for a successful build:
      extattr_get_link sigaction sigprocmask setattrlist)
  
  AC_CHECK_FUNCS(getpgrp tcgetpgrp)
---- old/flist.c
-+++ new/flist.c
+diff --git a/flist.c b/flist.c
+--- a/flist.c
++++ b/flist.c
 @@ -50,6 +50,7 @@ extern int preserve_links;
  extern int preserve_hard_links;
  extern int preserve_devices;
@@ -57,7 +60,7 @@ To use this patch, run these commands for a successful build:
  extern int uid_ndx;
  extern int gid_ndx;
  extern int eol_nulls;
-@@ -339,6 +340,9 @@ static void send_file_entry(int f, struc
+@@ -345,6 +346,9 @@ static void send_file_entry(int f, struct file_struct *file, int ndx, int first_
  {
        static time_t modtime;
        static mode_t mode;
@@ -67,7 +70,7 @@ To use this patch, run these commands for a successful build:
  #ifdef SUPPORT_HARD_LINKS
        static int64 dev;
  #endif
-@@ -397,6 +401,12 @@ static void send_file_entry(int f, struc
+@@ -403,6 +407,12 @@ static void send_file_entry(int f, struct file_struct *file, int ndx, int first_
                xflags |= XMIT_SAME_MODE;
        else
                mode = file->mode;
@@ -80,7 +83,7 @@ To use this patch, run these commands for a successful build:
  
        if ((preserve_devices && IS_DEVICE(mode))
         || (preserve_specials && IS_SPECIAL(mode))) {
-@@ -517,6 +527,10 @@ static void send_file_entry(int f, struc
+@@ -523,6 +533,10 @@ static void send_file_entry(int f, struct file_struct *file, int ndx, int first_
        }
        if (!(xflags & XMIT_SAME_MODE))
                write_int(f, to_wire_mode(mode));
@@ -91,7 +94,7 @@ To use this patch, run these commands for a successful build:
        if (uid_ndx && !(xflags & XMIT_SAME_UID)) {
                if (protocol_version < 30)
                        write_int(f, uid);
-@@ -605,6 +619,9 @@ static struct file_struct *recv_file_ent
+@@ -611,6 +625,9 @@ static struct file_struct *recv_file_entry(struct file_list *flist,
  {
        static int64 modtime;
        static mode_t mode;
@@ -101,7 +104,7 @@ To use this patch, run these commands for a successful build:
  #ifdef SUPPORT_HARD_LINKS
        static int64 dev;
  #endif
-@@ -736,9 +753,12 @@ static struct file_struct *recv_file_ent
+@@ -742,9 +759,12 @@ static struct file_struct *recv_file_entry(struct file_list *flist,
        }
        if (!(xflags & XMIT_SAME_MODE))
                mode = from_wire_mode(read_int(f));
@@ -115,7 +118,7 @@ To use this patch, run these commands for a successful build:
  
        if (uid_ndx && !(xflags & XMIT_SAME_UID)) {
                if (protocol_version < 30)
-@@ -858,6 +878,10 @@ static struct file_struct *recv_file_ent
+@@ -866,6 +886,10 @@ static struct file_struct *recv_file_entry(struct file_list *flist,
                OPT_EXTRA(file, 0)->unum = (uint32)(file_length >> 32);
        }
        file->mode = mode;
@@ -126,7 +129,7 @@ To use this patch, run these commands for a successful build:
        if (uid_ndx)
                F_OWNER(file) = uid;
        if (gid_ndx) {
-@@ -1182,6 +1206,10 @@ struct file_struct *make_file(const char
+@@ -1196,6 +1220,10 @@ struct file_struct *make_file(const char *fname, struct file_list *flist,
                OPT_EXTRA(file, 0)->unum = (uint32)(st.st_size >> 32);
        }
        file->mode = st.st_mode;
@@ -137,8 +140,9 @@ To use this patch, run these commands for a successful build:
        if (uid_ndx)
                F_OWNER(file) = st.st_uid;
        if (gid_ndx)
---- old/generator.c
-+++ new/generator.c
+diff --git a/generator.c b/generator.c
+--- a/generator.c
++++ b/generator.c
 @@ -112,6 +112,14 @@ static int need_retouch_dir_times;
  static int need_retouch_dir_perms;
  static const char *solo_file = NULL;
@@ -186,7 +190,7 @@ To use this patch, run these commands for a successful build:
        if (S_ISDIR(mode) && !(flags & DEL_DIR_IS_EMPTY)) {
                ignore_perishable = 1;
                /* If DEL_RECURSE is not set, this just reports emptiness. */
-@@ -262,7 +272,7 @@ static enum delret delete_dir_contents(c
+@@ -262,7 +272,7 @@ static enum delret delete_dir_contents(char *fname, int flags)
                if (S_ISDIR(fp->mode)
                 && delete_dir_contents(fname, flags | DEL_RECURSE) != DR_SUCCESS)
                        ret = DR_NOT_EMPTY;
@@ -195,7 +199,7 @@ To use this patch, run these commands for a successful build:
                        ret = DR_NOT_EMPTY;
        }
  
-@@ -318,8 +328,9 @@ static int remember_delete(struct file_s
+@@ -318,8 +328,9 @@ static int remember_delete(struct file_struct *file, const char *fname)
  
        while (1) {
                len = snprintf(deldelay_buf + deldelay_cnt,
@@ -207,7 +211,7 @@ To use this patch, run these commands for a successful build:
                if ((deldelay_cnt += len) <= deldelay_size)
                        break;
                if (deldelay_fd < 0 && !start_delete_delay_temp())
-@@ -332,7 +343,7 @@ static int remember_delete(struct file_s
+@@ -332,7 +343,7 @@ static int remember_delete(struct file_struct *file, const char *fname)
        return 1;
  }
  
@@ -250,7 +254,7 @@ To use this patch, run these commands for a successful build:
        if (deldelay_fd >= 0)
                close(deldelay_fd);
  }
-@@ -472,7 +483,7 @@ static void delete_in_dir(char *fbuf, st
+@@ -472,7 +483,7 @@ static void delete_in_dir(char *fbuf, struct file_struct *file, dev_t *fs_dev)
                                if (!remember_delete(fp, delbuf))
                                        break;
                        } else
@@ -259,7 +263,7 @@ To use this patch, run these commands for a successful build:
                }
        }
  
-@@ -1296,7 +1307,7 @@ static void recv_generator(char *fname, 
+@@ -1296,7 +1307,7 @@ static void recv_generator(char *fname, struct file_struct *file, int ndx,
                         * full later (right before we handle its contents). */
                        if (statret == 0
                         && (S_ISDIR(sx.st.st_mode)
@@ -268,7 +272,7 @@ To use this patch, run these commands for a successful build:
                                goto cleanup; /* Any errors get reported later. */
                        if (do_mkdir(fname, file->mode & 0700) == 0)
                                file->flags |= FLAG_DIR_CREATED;
-@@ -1308,7 +1319,7 @@ static void recv_generator(char *fname, 
+@@ -1308,7 +1319,7 @@ static void recv_generator(char *fname, struct file_struct *file, int ndx,
                 * we need to delete it.  If it doesn't exist, then
                 * (perhaps recursively) create it. */
                if (statret == 0 && !S_ISDIR(sx.st.st_mode)) {
@@ -277,7 +281,7 @@ To use this patch, run these commands for a successful build:
                                goto skipping_dir_contents;
                        statret = -1;
                }
-@@ -1437,7 +1448,7 @@ static void recv_generator(char *fname, 
+@@ -1437,7 +1448,7 @@ static void recv_generator(char *fname, struct file_struct *file, int ndx,
                        }
                        /* Not the right symlink (or not a symlink), so
                         * delete it. */
@@ -286,7 +290,7 @@ To use this patch, run these commands for a successful build:
                                goto cleanup;
                } else if (basis_dir[0] != NULL) {
                        int j = try_dests_non(file, fname, ndx, fnamecmpbuf, &sx,
-@@ -1516,7 +1527,7 @@ static void recv_generator(char *fname, 
+@@ -1516,7 +1527,7 @@ static void recv_generator(char *fname, struct file_struct *file, int ndx,
                                        goto return_with_success;
                                goto cleanup;
                        }
@@ -295,7 +299,7 @@ To use this patch, run these commands for a successful build:
                                goto cleanup;
                } else if (basis_dir[0] != NULL) {
                        int j = try_dests_non(file, fname, ndx, fnamecmpbuf, &sx,
-@@ -1607,7 +1618,7 @@ static void recv_generator(char *fname, 
+@@ -1607,7 +1618,7 @@ static void recv_generator(char *fname, struct file_struct *file, int ndx,
        fnamecmp_type = FNAMECMP_FNAME;
  
        if (statret == 0 && !S_ISREG(sx.st.st_mode)) {
@@ -304,8 +308,9 @@ To use this patch, run these commands for a successful build:
                        goto cleanup;
                statret = -1;
                stat_errno = ENOENT;
---- old/options.c
-+++ new/options.c
+diff --git a/options.c b/options.c
+--- a/options.c
++++ b/options.c
 @@ -51,6 +51,7 @@ int preserve_hard_links = 0;
  int preserve_acls = 0;
  int preserve_xattrs = 0;
@@ -314,7 +319,7 @@ To use this patch, run these commands for a successful build:
  int preserve_executability = 0;
  int preserve_devices = 0;
  int preserve_specials = 0;
-@@ -221,6 +222,7 @@ static void print_rsync_version(enum log
+@@ -222,6 +223,7 @@ static void print_rsync_version(enum logcode f)
        char const *links = "no ";
        char const *iconv = "no ";
        char const *ipv6 = "no ";
@@ -322,7 +327,7 @@ To use this patch, run these commands for a successful build:
        STRUCT_STAT *dumstat;
  
  #if SUBPROTOCOL_VERSION != 0
-@@ -250,6 +252,9 @@ static void print_rsync_version(enum log
+@@ -251,6 +253,9 @@ static void print_rsync_version(enum logcode f)
  #ifdef ICONV_OPTION
        iconv = "";
  #endif
@@ -332,7 +337,7 @@ To use this patch, run these commands for a successful build:
  
        rprintf(f, "%s  version %s  protocol version %d%s\n",
                RSYNC_NAME, RSYNC_VERSION, PROTOCOL_VERSION, subprotocol);
-@@ -263,8 +268,8 @@ static void print_rsync_version(enum log
+@@ -264,8 +269,8 @@ static void print_rsync_version(enum logcode f)
                (int)(sizeof (int64) * 8));
        rprintf(f, "    %ssocketpairs, %shardlinks, %ssymlinks, %sIPv6, batchfiles, %sinplace,\n",
                got_socketpair, hardlinks, links, ipv6, have_inplace);
@@ -343,7 +348,7 @@ To use this patch, run these commands for a successful build:
  
  #ifdef MAINTAINER_MODE
        rprintf(f, "Panic Action: \"%s\"\n", get_panic_action());
-@@ -331,6 +336,7 @@ void usage(enum logcode F)
+@@ -332,6 +337,7 @@ void usage(enum logcode F)
    rprintf(F," -K, --keep-dirlinks         treat symlinked dir on receiver as dir\n");
    rprintf(F," -H, --hard-links            preserve hard links\n");
    rprintf(F," -p, --perms                 preserve permissions\n");
@@ -351,7 +356,7 @@ To use this patch, run these commands for a successful build:
    rprintf(F," -E, --executability         preserve the file's executability\n");
    rprintf(F,"     --chmod=CHMOD           affect file and/or directory permissions\n");
  #ifdef SUPPORT_ACLS
-@@ -470,6 +476,8 @@ static struct poptOption long_options[] 
+@@ -472,6 +478,8 @@ static struct poptOption long_options[] = {
    {"perms",           'p', POPT_ARG_VAL,    &preserve_perms, 1, 0, 0 },
    {"no-perms",         0,  POPT_ARG_VAL,    &preserve_perms, 0, 0, 0 },
    {"no-p",             0,  POPT_ARG_VAL,    &preserve_perms, 0, 0, 0 },
@@ -360,7 +365,7 @@ To use this patch, run these commands for a successful build:
    {"executability",   'E', POPT_ARG_NONE,   &preserve_executability, 0, 0, 0 },
    {"acls",            'A', POPT_ARG_NONE,   0, 'A', 0, 0 },
    {"no-acls",          0,  POPT_ARG_VAL,    &preserve_acls, 0, 0, 0 },
-@@ -1284,6 +1292,15 @@ int parse_arguments(int *argc_p, const c
+@@ -1287,6 +1295,15 @@ int parse_arguments(int *argc_p, const char ***argv_p, int frommain)
        }
  #endif
  
@@ -376,7 +381,7 @@ To use this patch, run these commands for a successful build:
        if (write_batch && read_batch) {
                snprintf(err_buf, sizeof err_buf,
                        "--write-batch and --read-batch can not be used together\n");
-@@ -1792,6 +1809,9 @@ void server_options(char **args, int *ar
+@@ -1795,6 +1812,9 @@ void server_options(char **args, int *argc_p)
        if (xfer_dirs && !recurse && delete_mode && am_sender)
                args[ac++] = "--no-r";
  
@@ -386,8 +391,9 @@ To use this patch, run these commands for a successful build:
        if (do_compression && def_compress_level != Z_DEFAULT_COMPRESSION) {
                if (asprintf(&arg, "--compress-level=%d", def_compress_level) < 0)
                        goto oom;
---- old/rsync.c
-+++ new/rsync.c
+diff --git a/rsync.c b/rsync.c
+--- a/rsync.c
++++ b/rsync.c
 @@ -32,6 +32,7 @@ extern int dry_run;
  extern int preserve_acls;
  extern int preserve_xattrs;
@@ -413,7 +419,7 @@ To use this patch, run these commands for a successful build:
  static const char *default_charset(void)
  {
  # if defined HAVE_LIBCHARSET_H && defined HAVE_LOCALE_CHARSET
-@@ -337,6 +348,41 @@ mode_t dest_mode(mode_t flist_mode, mode
+@@ -337,6 +348,41 @@ mode_t dest_mode(mode_t flist_mode, mode_t stat_mode, int dflt_perms,
        return new_mode;
  }
  
@@ -422,7 +428,7 @@ To use this patch, run these commands for a successful build:
 +static int set_fileflags(const char *fname, uint32 fileflags)
 +{
 +      if (do_chflags(fname, fileflags) != 0) {
-+              rsyserr(FERROR, errno,
++              rsyserr(FERROR_XFER, errno,
 +                      "failed to set file flags on %s",
 +                      full_fname(fname));
 +              return 0;
@@ -455,7 +461,7 @@ To use this patch, run these commands for a successful build:
  int set_file_attrs(const char *fname, struct file_struct *file, stat_x *sxp,
                   const char *fnamecmp, int flags)
  {
-@@ -468,6 +514,15 @@ int set_file_attrs(const char *fname, st
+@@ -468,6 +514,15 @@ int set_file_attrs(const char *fname, struct file_struct *file, stat_x *sxp,
        }
  #endif
  
@@ -471,7 +477,7 @@ To use this patch, run these commands for a successful build:
        if (verbose > 1 && flags & ATTRS_REPORT) {
                if (updated)
                        rprintf(FCLIENT, "%s\n", fname);
-@@ -527,6 +582,9 @@ void finish_transfer(const char *fname, 
+@@ -527,6 +582,9 @@ void finish_transfer(const char *fname, const char *fnametmp,
        set_file_attrs(fnametmp, file, NULL, fnamecmp,
                       ok_to_set_time ? 0 : ATTRS_SKIP_MTIME);
  
@@ -481,7 +487,7 @@ To use this patch, run these commands for a successful build:
        /* move tmp file over real file */
        if (verbose > 2)
                rprintf(FINFO, "renaming %s to %s\n", fnametmp, fname);
-@@ -541,6 +599,9 @@ void finish_transfer(const char *fname, 
+@@ -541,6 +599,9 @@ void finish_transfer(const char *fname, const char *fnametmp,
        }
        if (ret == 0) {
                /* The file was moved into place (not copied), so it's done. */
@@ -491,9 +497,10 @@ To use this patch, run these commands for a successful build:
                return;
        }
        /* The file was copied, so tweak the perms of the copied file.  If it
---- old/rsync.h
-+++ new/rsync.h
-@@ -57,6 +57,7 @@
+diff --git a/rsync.h b/rsync.h
+--- a/rsync.h
++++ b/rsync.h
+@@ -60,6 +60,7 @@
  #define XMIT_RDEV_MINOR_8_pre30 (1<<11)       /* protocols 28 - 29  */
  #define XMIT_GROUP_NAME_FOLLOWS (1<<11) /* protocols 30 - now */
  #define XMIT_HLINK_FIRST (1<<12)      /* protocols 30 - now (HLINKED files only) */
@@ -501,7 +508,7 @@ To use this patch, run these commands for a successful build:
  
  /* These flags are used in the live flist data. */
  
-@@ -441,6 +442,10 @@ typedef unsigned int size_t;
+@@ -451,6 +452,10 @@ typedef unsigned int size_t;
  #endif
  #endif
  
@@ -512,7 +519,7 @@ To use this patch, run these commands for a successful build:
  /* Find a variable that is either exactly 32-bits or longer.
   * If some code depends on 32-bit truncation, it will need to
   * take special action in a "#if SIZEOF_INT32 > 4" section. */
-@@ -608,6 +613,7 @@ extern int file_extra_cnt;
+@@ -618,6 +623,7 @@ extern int file_extra_cnt;
  extern int inc_recurse;
  extern int uid_ndx;
  extern int gid_ndx;
@@ -520,7 +527,7 @@ To use this patch, run these commands for a successful build:
  extern int acls_ndx;
  extern int xattrs_ndx;
  
-@@ -645,6 +651,7 @@ extern int xattrs_ndx;
+@@ -655,6 +661,7 @@ extern int xattrs_ndx;
  /* When the associated option is on, all entries will have these present: */
  #define F_OWNER(f) REQ_EXTRA(f, uid_ndx)->unum
  #define F_GROUP(f) REQ_EXTRA(f, gid_ndx)->unum
@@ -528,9 +535,10 @@ To use this patch, run these commands for a successful build:
  #define F_ACL(f) REQ_EXTRA(f, acls_ndx)->num
  #define F_XATTR(f) REQ_EXTRA(f, xattrs_ndx)->num
  #define F_NDX(f) REQ_EXTRA(f, unsort_ndx)->num
---- old/rsync.yo
-+++ new/rsync.yo
-@@ -338,6 +338,7 @@ to the detailed description below for a 
+diff --git a/rsync.yo b/rsync.yo
+--- a/rsync.yo
++++ b/rsync.yo
+@@ -338,6 +338,7 @@ to the detailed description below for a complete description.  verb(
   -K, --keep-dirlinks         treat symlinked dir on receiver as dir
   -H, --hard-links            preserve hard links
   -p, --perms                 preserve permissions
@@ -538,7 +546,7 @@ To use this patch, run these commands for a successful build:
   -E, --executability         preserve executability
       --chmod=CHMOD           affect file and/or directory permissions
   -A, --acls                  preserve ACLs (implies -p)
-@@ -539,7 +540,9 @@ specified, in which case bf(-r) is not i
+@@ -540,7 +541,9 @@ specified, in which case bf(-r) is not implied.
  
  Note that bf(-a) bf(does not preserve hardlinks), because
  finding multiply-linked files is expensive.  You must separately
@@ -549,7 +557,7 @@ To use this patch, run these commands for a successful build:
  
  dit(--no-OPTION) You may turn off one or more implied options by prefixing
  the option name with "no-".  Not all options may be prefixed with a "no-":
-@@ -908,6 +911,13 @@ super-user copies all namespaces except 
+@@ -909,6 +912,13 @@ super-user copies all namespaces except system.*.  A normal user only copies
  the user.* namespace.  To be able to backup and restore non-user namespaces as
  a normal user, see the bf(--fake-super) option.
  
@@ -563,9 +571,10 @@ To use this patch, run these commands for a successful build:
  dit(bf(--chmod)) This option tells rsync to apply one or more
  comma-separated "chmod" strings to the permission of the files in the
  transfer.  The resulting value is treated as though it was the permissions
---- old/syscall.c
-+++ new/syscall.c
-@@ -173,6 +173,15 @@ int do_chmod(const char *path, mode_t mo
+diff --git a/syscall.c b/syscall.c
+--- a/syscall.c
++++ b/syscall.c
+@@ -173,6 +173,15 @@ int do_chmod(const char *path, mode_t mode)
  }
  #endif