extern int preserve_acls;
extern int preserve_xattrs;
extern int need_messages_from_generator;
-@@ -60,7 +62,7 @@ extern iconv_t ic_send, ic_recv;
+@@ -61,7 +63,7 @@ extern char *iconv_opt;
#endif
/* These index values are for the file-list's extra-attribute array. */
+int uid_ndx, gid_ndx, fileflags_ndx, acls_ndx, xattrs_ndx, unsort_ndx;
int receiver_symlink_times = 0; /* receiver can set the time on a symlink */
-
-@@ -134,6 +136,8 @@ void setup_protocol(int f_out,int f_in)
+ int sender_symlink_iconv = 0; /* sender should convert symlink content */
+@@ -137,6 +139,8 @@ void setup_protocol(int f_out,int f_in)
uid_ndx = ++file_extra_cnt;
if (preserve_gid)
gid_ndx = ++file_extra_cnt;
extern int uid_ndx;
extern int gid_ndx;
extern int eol_nulls;
-@@ -390,6 +391,9 @@ static void send_file_entry(int f, const char *fname, struct file_struct *file,
+@@ -395,6 +396,9 @@ static void send_file_entry(int f, const char *fname, struct file_struct *file,
{
static time_t modtime;
static mode_t mode;
#ifdef SUPPORT_HARD_LINKS
static int64 dev;
#endif
-@@ -419,6 +423,14 @@ static void send_file_entry(int f, const char *fname, struct file_struct *file,
+@@ -424,6 +428,14 @@ static void send_file_entry(int f, const char *fname, struct file_struct *file,
xflags |= XMIT_SAME_MODE;
else
mode = file->mode;
if ((preserve_devices && IS_DEVICE(mode))
|| (preserve_specials && IS_SPECIAL(mode))) {
-@@ -533,6 +545,10 @@ static void send_file_entry(int f, const char *fname, struct file_struct *file,
+@@ -538,6 +550,10 @@ static void send_file_entry(int f, const char *fname, struct file_struct *file,
}
if (!(xflags & XMIT_SAME_MODE))
write_int(f, to_wire_mode(mode));
if (preserve_uid && !(xflags & XMIT_SAME_UID)) {
if (protocol_version < 30)
write_int(f, uid);
-@@ -621,6 +637,9 @@ static struct file_struct *recv_file_entry(struct file_list *flist,
+@@ -624,6 +640,9 @@ static struct file_struct *recv_file_entry(struct file_list *flist,
{
static int64 modtime;
static mode_t mode;
#ifdef SUPPORT_HARD_LINKS
static int64 dev;
#endif
-@@ -756,6 +775,10 @@ static struct file_struct *recv_file_entry(struct file_list *flist,
+@@ -759,6 +778,10 @@ static struct file_struct *recv_file_entry(struct file_list *flist,
if (chmod_modes && !S_ISLNK(mode))
mode = tweak_mode(mode, chmod_modes);
if (preserve_uid && !(xflags & XMIT_SAME_UID)) {
if (protocol_version < 30)
-@@ -889,6 +912,10 @@ static struct file_struct *recv_file_entry(struct file_list *flist,
+@@ -899,6 +922,10 @@ static struct file_struct *recv_file_entry(struct file_list *flist,
}
#endif
file->mode = mode;
if (preserve_uid)
F_OWNER(file) = uid;
if (preserve_gid) {
-@@ -1237,6 +1264,10 @@ struct file_struct *make_file(const char *fname, struct file_list *flist,
+@@ -1273,6 +1300,10 @@ struct file_struct *make_file(const char *fname, struct file_list *flist,
}
#endif
file->mode = st.st_mode;
if (uid_ndx) /* Check uid_ndx instead of preserve_uid for del support */
F_OWNER(file) = st.st_uid;
if (gid_ndx) /* Check gid_ndx instead of preserve_gid for del support */
-@@ -1355,6 +1386,7 @@ static struct file_struct *send_file_name(int f, struct file_list *flist,
+@@ -1427,6 +1458,7 @@ static struct file_struct *send_file_name(int f, struct file_list *flist,
#endif
#ifdef SUPPORT_XATTRS
if (preserve_xattrs) {
diff --git a/log.c b/log.c
--- a/log.c
+++ b/log.c
-@@ -656,7 +656,7 @@ static void log_formatted(enum logcode code, const char *format, const char *op,
+@@ -660,7 +660,7 @@ static void log_formatted(enum logcode code, const char *format, const char *op,
c[5] = !(iflags & ITEM_REPORT_PERMS) ? '.' : 'p';
c[6] = !(iflags & ITEM_REPORT_OWNER) ? '.' : 'o';
c[7] = !(iflags & ITEM_REPORT_GROUP) ? '.' : 'g';
{"ignore-errors", 0, POPT_ARG_VAL, &ignore_errors, 1, 0, 0 },
{"no-ignore-errors", 0, POPT_ARG_VAL, &ignore_errors, 0, 0, 0 },
{"max-delete", 0, POPT_ARG_INT, &max_delete, 0, 0, 0 },
-@@ -1858,6 +1884,9 @@ void server_options(char **args, int *argc_p)
+@@ -1866,6 +1892,9 @@ void server_options(char **args, int *argc_p)
if (xfer_dirs && !recurse && delete_mode && am_sender)
args[ac++] = "--no-r";
if (do_compression && def_compress_level != Z_DEFAULT_COMPRESSION) {
if (asprintf(&arg, "--compress-level=%d", def_compress_level) < 0)
goto oom;
-@@ -1945,6 +1974,16 @@ void server_options(char **args, int *argc_p)
+@@ -1953,6 +1982,16 @@ void server_options(char **args, int *argc_p)
args[ac++] = "--delete-excluded";
if (force_delete)
args[ac++] = "--force";
#define ITEM_BASIS_TYPE_FOLLOWS (1<<11)
#define ITEM_XNAME_FOLLOWS (1<<12)
#define ITEM_IS_NEW (1<<13)
-@@ -460,6 +463,28 @@ typedef unsigned int size_t;
+@@ -462,6 +465,28 @@ typedef unsigned int size_t;
#endif
#endif
/* Find a variable that is either exactly 32-bits or longer.
* If some code depends on 32-bit truncation, it will need to
* take special action in a "#if SIZEOF_INT32 > 4" section. */
-@@ -630,6 +655,7 @@ extern int file_extra_cnt;
+@@ -632,6 +657,7 @@ extern int file_extra_cnt;
extern int inc_recurse;
extern int uid_ndx;
extern int gid_ndx;
extern int acls_ndx;
extern int xattrs_ndx;
-@@ -667,6 +693,11 @@ extern int xattrs_ndx;
+@@ -669,6 +695,11 @@ extern int xattrs_ndx;
/* When the associated option is on, all entries will have these present: */
#define F_OWNER(f) REQ_EXTRA(f, uid_ndx)->unum
#define F_GROUP(f) REQ_EXTRA(f, gid_ndx)->unum
dit(bf(--chmod)) This option tells rsync to apply one or more
comma-separated "chmod" strings to the permission of the files in the
transfer. The resulting value is treated as though it was the permissions
-@@ -1190,12 +1218,13 @@ See bf(--delete) (which is implied) for more details on file-deletion.
+@@ -1197,12 +1225,13 @@ See bf(--delete) (which is implied) for more details on file-deletion.
dit(bf(--ignore-errors)) Tells bf(--delete) to go ahead and delete files
even when there are I/O errors.
bf(--recursive) option was also enabled.
dit(bf(--max-delete=NUM)) This tells rsync not to delete more than NUM
-@@ -1651,7 +1680,7 @@ with older versions of rsync, but that also turns on the output of other
+@@ -1663,7 +1692,7 @@ with older versions of rsync, but that also turns on the output of other
verbose messages).
The "%i" escape has a cryptic output that is 11 letters long. The general
type of update being done, bf(X) is replaced by the file-type, and the
other letters represent attributes that may be output if they are being
modified.
-@@ -1707,7 +1736,7 @@ quote(itemization(
+@@ -1719,7 +1748,7 @@ quote(itemization(
sender's value (requires bf(--owner) and super-user privileges).
it() A bf(g) means the group is different and is being updated to the
sender's value (requires bf(--group) and the authority to set the group).
Matt McCutchen's Web Site / rsync / rsync-patches.git / blobdiff