Fixed a typo.

[rsync/rsync-patches.git] / slp.diff

This adds Service Location Protocol support.

After applying this patch, run these commands for a successful build:

    ./prepare-source
    ./configure --enable-slp
    make

TODO: the configure changes should abort if the user requests --enable-slp
and we can't honor that request.

--- old/Makefile.in
+++ new/Makefile.in
@@ -12,6 +12,8 @@ CFLAGS=@CFLAGS@
 CPPFLAGS=@CPPFLAGS@
 EXEEXT=@EXEEXT@
 LDFLAGS=@LDFLAGS@
+LIBSLP=@LIBSLP@
+SLPOBJ=@SLPOBJ@
 
 INSTALLCMD=@INSTALL@
 INSTALLMAN=@INSTALL@
@@ -35,7 +37,7 @@ OBJS1=rsync.o generator.o receiver.o cle
 OBJS2=options.o flist.o io.o compat.o hlink.o token.o uidlist.o socket.o \
 	fileio.o batch.o clientname.o chmod.o
 OBJS3=progress.o pipe.o
-DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o
+DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o $(SLPOBJ)
 popt_OBJS=popt/findme.o  popt/popt.o  popt/poptconfig.o \
 	popt/popthelp.o popt/poptparse.o
 OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(DAEMON_OBJ) $(LIBOBJ) $(ZLIBOBJ) @BUILD_POPT@
@@ -69,7 +71,7 @@ install-strip:
 	$(MAKE) INSTALL_STRIP='-s' install
 
 rsync$(EXEEXT): $(OBJS)
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS) $(LIBSLP)
 
 $(OBJS): $(HEADERS)
 
--- old/clientserver.c
+++ new/clientserver.c
@@ -836,6 +836,13 @@ int daemon_main(void)
 	 * address too.  In fact, why not just do inet_ntop on the
 	 * local address??? */
 
+#ifdef HAVE_LIBSLP
+	if (register_services()) {
+		rprintf(FINFO,
+		    "Couldn't register with service discovery protocol, continuing anyway\n");
+	}
+#endif
+
 	if (((pid_file = lp_pid_file()) != NULL) && (*pid_file != '\0')) {
 		char pidbuf[16];
 		int fd;
--- old/configure.in
+++ new/configure.in
@@ -522,6 +522,29 @@ if test $rsync_cv_chown_follows_symlink 
   AC_DEFINE(CHOWN_MODIFIES_SYMLINK, 1, [Define to 1 if chown modifies symlinks.])
 fi
 
+AC_ARG_ENABLE(slp, [  --disable-slp           turn off SLP support, defaults to on])
+AC_ARG_WITH(openslp-libs, [  --with-openslp-libs     set directory for OpenSLP library],
+    LDFLAGS="-L$withval $LDFLAGS"
+    DSOFLAGS="-L$withval $DSOFLAGS",)
+AC_ARG_WITH(openslp-includes, [  --with-openslp-includes set directory for OpenSLP includes],
+    CFLAGS="-I$withval $CFLAGS"
+    CXXFLAGS="-I$withval $CXXFLAGS"
+    CPPFLAGS="-I$withval $CPPFLAGS",)
+
+LIBSLP=""
+SLPOBJ=""
+
+if test x$enable_slp != xno; then
+    AC_CHECK_HEADER(slp.h,
+        AC_CHECK_LIB(slp, SLPOpen,
+	    AC_DEFINE(HAVE_LIBSLP, 1, [Define to 1 for SLP support])
+	    SLPOBJ="srvreg.o srvloc.o"
+            LIBSLP="-lslp"))
+fi
+
+AC_SUBST(LIBSLP)
+AC_SUBST(SLPOBJ)
+
 AC_CACHE_CHECK([for working socketpair],rsync_cv_HAVE_SOCKETPAIR,[
 AC_TRY_RUN([
 #include <sys/types.h>
--- old/loadparm.c
+++ new/loadparm.c
@@ -105,6 +105,9 @@ typedef struct
 	char *socket_options;
 
 	int rsync_port;
+#ifdef HAVE_LIBSLP
+	int slp_refresh;
+#endif
 	int syslog_facility;
 } global;
 
@@ -286,6 +289,9 @@ static struct parm_struct parm_table[] =
  {"motd file",         P_STRING, P_GLOBAL,&Globals.motd_file,          NULL,0},
  {"pid file",          P_STRING, P_GLOBAL,&Globals.pid_file,           NULL,0},
  {"port",              P_INTEGER,P_GLOBAL,&Globals.rsync_port,         NULL,0},
+#ifdef HAVE_LIBSLP
+ {"slp refresh",       P_INTEGER,P_GLOBAL,&Globals.slp_refresh,        NULL,0},
+#endif
  {"socket options",    P_STRING, P_GLOBAL,&Globals.socket_options,     NULL,0},
  {"syslog facility",   P_ENUM,   P_GLOBAL,&Globals.syslog_facility,enum_facilities,0},
 
@@ -379,6 +385,9 @@ FN_GLOBAL_STRING(lp_pid_file, &Globals.p
 FN_GLOBAL_STRING(lp_socket_options, &Globals.socket_options)
 
 FN_GLOBAL_INTEGER(lp_rsync_port, &Globals.rsync_port)
+#ifdef HAVE_LIBSLP
+FN_GLOBAL_INTEGER(lp_slp_refresh, &Globals.slp_refresh)
+#endif
 FN_GLOBAL_INTEGER(lp_syslog_facility, &Globals.syslog_facility)
 
 FN_LOCAL_STRING(lp_auth_users, auth_users)
--- old/main.c
+++ new/main.c
@@ -962,6 +962,18 @@ static int start_client(int argc, char *
 	if (!read_batch) { /* for read_batch, NO source is specified */
 		argc--;
 		shell_path = check_for_hostspec(argv[0], &shell_machine, &rsync_port);
+
+		if (shell_machine && !shell_machine[0]) {
+#ifdef HAVE_LIBSLP
+			/* User entered just rsync:// URI */
+			print_service_list();
+			exit_cleanup(0);
+#else /* No SLP, die here */
+			rprintf(FINFO, "No SLP support, cannot browse\n");
+			exit_cleanup(RERR_SYNTAX);
+#endif
+		}
+
 		if (shell_path) { /* source is remote */
 			char *dummy1;
 			int dummy2;
--- old/options.c
+++ new/options.c
@@ -196,6 +196,7 @@ static void print_rsync_version(enum log
 	char const *hardlinks = "no ";
 	char const *links = "no ";
 	char const *ipv6 = "no ";
+	char const *slp = "no ";
 	STRUCT_STAT *dumstat;
 
 #ifdef HAVE_SOCKETPAIR
@@ -218,6 +219,10 @@ static void print_rsync_version(enum log
 	ipv6 = "";
 #endif
 
+#if HAVE_LIBSLP
+	slp = "";
+#endif
+
 	rprintf(f, "%s  version %s  protocol version %d\n",
 		RSYNC_NAME, RSYNC_VERSION, PROTOCOL_VERSION);
 	rprintf(f, "Copyright (C) 1996-2006 by Andrew Tridgell, Wayne Davison, and others.\n");
@@ -230,9 +235,9 @@ static void print_rsync_version(enum log
 	/* Note that this field may not have type ino_t.  It depends
 	 * on the complicated interaction between largefile feature
 	 * macros. */
-	rprintf(f, "              %sinplace, %sIPv6, "
+	rprintf(f, "              %sinplace, %sIPv6, %sSLP, "
 		"%d-bit system inums, %d-bit internal inums\n",
-		have_inplace, ipv6,
+		have_inplace, ipv6, slp,
 		(int) (sizeof dumstat->st_ino * 8),
 		(int) (sizeof (int64) * 8));
 #ifdef MAINTAINER_MODE
--- old/rsync.h
+++ new/rsync.h
@@ -154,6 +154,9 @@
 #define SIGNIFICANT_ITEM_FLAGS (~(\
 	ITEM_BASIS_TYPE_FOLLOWS | ITEM_XNAME_FOLLOWS | ITEM_LOCAL_CHANGE))
 
+/* this is the minimum we'll use, irrespective of config setting */
+/* definately don't set to less than about 30 seconds */
+#define SLP_MIN_TIMEOUT 120
 
 /* Log-message categories.  Only FERROR and FINFO get sent over the socket.
  * FLOG and FCLIENT are only used on the daemon side for custom logging,
--- old/rsync.yo
+++ new/rsync.yo
@@ -137,7 +137,12 @@ particular rsync daemon by leaving off t
 
 quote(tt(rsync somehost.mydomain.com::))
 
-See the following section for more details.
+And, if Service Location Protocol is available, the following will list the
+available rsync servers:
+
+quote(tt(rsync rsync://))
+
+See the following section for even more usage details.
 
 manpagesection(ADVANCED USAGE)
 
--- old/rsyncd.conf
+++ new/rsyncd.conf
@@ -0,0 +1,3 @@
+
+slp refresh = 300
+
--- old/rsyncd.conf.yo
+++ new/rsyncd.conf.yo
@@ -119,6 +119,15 @@ details on some of the options you may b
 special socket options are set.  These settings are superseded by the
 bf(--sockopts) command-line option.
 
+dit(bf(slp refresh)) This option is used to determine how long service
+advertisements are valid (measured in seconds), and is only applicable if
+you have Service Location Protocol support compiled in. If this option is
+not set or is set to zero, then service advertisements never time out. If
+this is set to less than 120 seconds, then 120 seconds is used. If it is
+set to more than 65535, then 65535 is used (which is a limitation of SLP).
+Using 3600 (one hour) is a good number if you tend to change your
+configuration.
+
 enddit()
 
 
@@ -544,6 +553,7 @@ use chroot = no
 max connections = 4
 syslog facility = local5
 pid file = /var/run/rsyncd.pid
+slp refresh = 3600
 
 [ftp]
         path = /var/ftp/pub
--- old/socket.c
+++ new/socket.c
@@ -447,6 +447,16 @@ void start_accept_loop(int port, int (*f
 {
 	fd_set deffds;
 	int *sp, maxfd, i;
+#ifdef HAVE_LIBSLP
+	time_t next_slp_refresh;
+	short slp_timeout = lp_slp_refresh();
+	if (slp_timeout) {
+		if (slp_timeout < SLP_MIN_TIMEOUT)
+			slp_timeout = SLP_MIN_TIMEOUT;
+		/* re-register before slp times out */
+		slp_timeout -= 15;
+	}
+#endif
 
 #ifdef HAVE_SIGACTION
 	sigact.sa_flags = SA_NOCLDSTOP;
@@ -475,14 +485,25 @@ void start_accept_loop(int port, int (*f
 			maxfd = sp[i];
 	}
 
+#ifdef HAVE_LIBSLP
+	next_slp_refresh = time(NULL) + slp_timeout;
+#endif
+
 	/* now accept incoming connections - forking a new process
 	 * for each incoming connection */
 	while (1) {
 		fd_set fds;
 		pid_t pid;
 		int fd;
+		int sel_ret;
 		struct sockaddr_storage addr;
 		socklen_t addrlen = sizeof addr;
+#ifdef HAVE_LIBSLP
+		struct timeval slp_tv;
+
+		slp_tv.tv_sec = 10;
+		slp_tv.tv_usec = 0;
+#endif
 
 		/* close log file before the potentially very long select so
 		 * file can be trimmed by another process instead of growing
@@ -494,8 +515,18 @@ void start_accept_loop(int port, int (*f
 #else
 		fds = deffds;
 #endif
-
-		if (select(maxfd + 1, &fds, NULL, NULL, NULL) != 1)
+#ifdef HAVE_LIBSLP
+		sel_ret = select(maxfd + 1, &fds, NULL, NULL,
+				 slp_timeout ? &slp_tv : NULL);
+		if (sel_ret == 0 && slp_timeout && time(NULL) > next_slp_refresh) {
+		    rprintf(FINFO, "Service registration expired, refreshing it\n");
+		    register_services();
+		    next_slp_refresh = time(NULL) + slp_timeout;
+		}
+#else
+		sel_ret = select(maxfd + 1, &fds, NULL, NULL, NULL);
+#endif
+		if (sel_ret != 1)
 			continue;
 
 		for (i = 0, fd = -1; sp[i] >= 0; i++) {
--- old/srvloc.c
+++ new/srvloc.c
@@ -0,0 +1,103 @@
+/* -*- c-file-style: "linux"; -*-
+
+   Copyright (C) 2002 by Brad Hards <bradh@frogmouth.net>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* This file implements the service location functionality */
+/* Basically, it uses normal Service Location Protocol API */
+
+/* It is really a cheap hack - just to show how it might work
+   in a real application.
+*/
+
+#include "rsync.h"
+
+#include <slp.h>
+#include <stdio.h>
+#include <string.h>
+
+/* This one just prints out the attributes */
+static SLPBoolean getAttrCallback(UNUSED(SLPHandle hslp), const char *attrlist,
+				  SLPError errcode, UNUSED(void *cookie))
+{
+	char *cleanstr;
+
+	if (errcode == SLP_OK) {
+		if (!strcmp(attrlist, "(comment=)"))
+			rprintf(FINFO, "\t(No description)\n");
+		else {
+			cleanstr = strrchr(attrlist, ')') ;
+			*cleanstr = ' '; /* remove last ')' */
+			rprintf(FINFO, "\t%s\n", strchr(attrlist, '=') + 1);
+		}
+	}
+	return SLP_FALSE;
+}
+
+static SLPBoolean getSLPSrvURLCallback(UNUSED(SLPHandle hslp),
+			const char *srvurl, UNUSED(unsigned short lifetime),
+			SLPError errcode, void *cookie)
+{
+	SLPError    result;
+	SLPHandle   attrhslp;
+
+	if (errcode == SLP_OK) {
+		/* chop service: off the front */
+		rprintf(FINFO, "  %s  ", (strchr(srvurl, ':') + 1));
+		/* check for any attributes */
+		if (SLPOpen("en", SLP_FALSE,&attrhslp) == SLP_OK) {
+			result = SLPFindAttrs(attrhslp, srvurl,
+					      "", /* return all attributes */
+					      "", /* use configured scopes */
+					      getAttrCallback, NULL);
+			if (result != SLP_OK) {
+				rprintf(FERROR, "errorcode: %i\n",result);
+			}
+			SLPClose(attrhslp);
+		}
+		*(SLPError*)cookie = SLP_OK;
+	} else
+		*(SLPError*)cookie = errcode;
+
+	/* Return SLP_TRUE because we want to be called again
+	 * if more services were found. */
+
+	return SLP_TRUE;
+}
+
+int print_service_list(void)
+{
+	SLPError err;
+	SLPError callbackerr;
+	SLPHandle hslp;
+
+	err = SLPOpen("en",SLP_FALSE,&hslp);
+	if (err != SLP_OK) {
+		rprintf(FERROR, "Error opening slp handle %i\n", err);
+		return err;
+	}
+
+	SLPFindSrvs(hslp, "rsync",
+		    0, /* use configured scopes */
+		    0, /* no attr filter        */
+		    getSLPSrvURLCallback, &callbackerr);
+
+	/* Now that we're done using slp, close the slp handle */
+	SLPClose(hslp);
+
+	return 0;
+}
--- old/srvreg.c
+++ new/srvreg.c
@@ -0,0 +1,128 @@
+/* -*- c-file-style: "linux"; -*-
+
+   Copyright (C) 2002 by Brad Hards <bradh@frogmouth.net>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* This file implements the service registration functionality */
+
+/* Basically, it uses normal Service Location Protocol API */
+
+#include "rsync.h"
+#include "slp.h"
+#include "netdb.h"
+
+extern int rsync_port;
+
+static void slp_callback(UNUSED(SLPHandle hslp), SLPError errcode, void *cookie)
+{
+	/* return the error code in the cookie */
+	*(SLPError*)cookie = errcode;
+
+	/* You could do something else here like print out
+	 * the errcode, etc.  Remember, as a general rule,
+	 * do not try to do too much in a callback because
+	 * it is being executed by the same thread that is
+	 * reading slp packets from the wire. */
+}
+
+int register_services(void)
+{
+	SLPError err, callbackerr;
+	SLPHandle hslp;
+	int n;
+	int i;
+	char srv[120];
+	char attr[120];
+	char localhost[256];
+	extern char *config_file;
+	short timeout;
+	struct addrinfo aih, *ai = 0;
+
+	if (!lp_load(config_file, 0)) {
+		exit_cleanup(RERR_SYNTAX);
+	}
+
+	n = lp_numservices();
+
+	if (0 == lp_slp_refresh())
+		timeout = SLP_LIFETIME_MAXIMUM; /* don't expire, ever */
+	else if (SLP_MIN_TIMEOUT > lp_slp_refresh())
+		timeout = SLP_MIN_TIMEOUT; /* use a reasonable minimum */
+	else if (SLP_LIFETIME_MAXIMUM <= lp_slp_refresh())
+		timeout = (SLP_LIFETIME_MAXIMUM - 1); /* as long as possible */
+	else
+		timeout = lp_slp_refresh();
+
+	rprintf(FINFO, "rsyncd registering %d service%s with slpd for %d seconds:\n", n, ((n==1)? "":"s"), timeout);
+	err = SLPOpen("en",SLP_FALSE,&hslp);
+	if (err != SLP_OK) {
+		rprintf(FINFO, "Error opening slp handle %i\n",err);
+		return err;
+	}
+	if (gethostname(localhost, sizeof localhost)) {
+	       rprintf(FINFO, "Could not get hostname: %s\n", strerror(errno));
+	       return err;
+	}
+	memset(&aih, 0, sizeof aih);
+	aih.ai_family = PF_UNSPEC;
+	aih.ai_flags = AI_CANONNAME;
+	if (0 != (err = getaddrinfo(localhost, 0, &aih, &ai)) || !ai) {
+	       rprintf(FINFO, "Could not resolve hostname: %s\n", gai_strerror(err));
+	       return err;
+	}
+	/* Register each service with SLP */
+	for (i = 0; i < n; i++) {
+		if (!lp_list(i))
+			continue;
+
+		snprintf(srv, sizeof srv, "service:rsync://%s:%d/%s",
+			 ai->ai_canonname,
+			 rsync_port,
+			 lp_name(i));
+		rprintf(FINFO, "    %s\n", srv);
+		if (lp_comment(i)) {
+			snprintf(attr, sizeof attr, "(comment=%s)",
+				 lp_comment(i));
+		}
+		err = SLPReg(hslp,
+			     srv, /* service to register */
+			     timeout,
+			     0,  /* this is ignored */
+			     attr, /* attributes */
+			     SLP_TRUE, /* new registration - don't change this */
+			     slp_callback, /* callback */
+			     &callbackerr);
+
+		/* err may contain an error code that occurred as the slp library
+		 * _prepared_ to make the call. */
+		if (err != SLP_OK || callbackerr != SLP_OK)
+			rprintf(FINFO, "Error registering service with slp %i\n", err);
+
+		/* callbackerr may contain an error code (that was assigned through
+		 * the callback cookie) that occurred as slp packets were sent on
+		 * the wire. */
+		if (callbackerr != SLP_OK)
+			rprintf(FINFO, "Error registering service with slp %i\n",callbackerr);
+	}
+
+	/* Now that we're done using slp, close the slp handle */
+	freeaddrinfo(ai);
+	SLPClose(hslp);
+
+	/* refresh is done in main select loop */
+	return 0;
+}