X-Git-Url: https://mattmccutchen.net/rsync/rsync.git/blobdiff_plain/bdedced84b7f446f818efd4d25b8985285a50009..1a85a969a7f1283e90e289c686d2d4fd2d78ff80:/NEWS diff --git a/NEWS b/NEWS index debed383..ee0661ba 100644 --- a/NEWS +++ b/NEWS @@ -1,164 +1,81 @@ -NEWS for rsync 2.6.5 (UNRELEASED) -Protocol: 29 (unchanged) -Changes since 2.6.4: +NEWS for rsync 3.1.0 (UNRELEASED) +Protocol: 31 (changed) +Changes since 3.0.4: OUTPUT CHANGES: - - Non-printable chars in filenames are now output using backslash- - escaped characters rather than '?'s. Any non-printable character is - output using 3 digits of octal (e.g. "\n" -> "\012"), and a backslash - is now output as "\\". Rsync also uses your locale setting, which - can make it treat fewer high-bit characters as non-printable. - - - If rsync received an empty file list when pulling files, it would - output a "nothing to do" message and exit with a 0 (success) exit - status, even if the remote rsync returned an error (it did not do - this under the same conditions when pushing files). This was changed - to make the pulling behavior the same as the pushing behavior: we - now do the normal end-of-run outputting (depending on options) and - exit with the appropriate exit status. + - Output numbers in 3-digit groups by default (e.g. 1,234,567). See the + --human-readable option for a way to turn it off. See also the daemon's + "log format" parameter and related command-line options (including + --out-format) for a modifier that can be used to request digit-grouping + or human-readable output in log escapes. (Note that log output is + unchanged by default.) + + - The output of the --progress option has changed: the string "xfer" was + shortened to "xfr", and the string "to-check" was shortened to "to-chk", + both designed to make room for the (by default) wider display of file + size numbers without making the total line-length longer. Also, when + incremental recursion is enabled, the string "ir-chk" will be used + instead of "to-chk" up until the incremental-recursion scan is done, + letting you know that the value to check and the total value will still + be increasing as new files are found. BUG FIXES: - - A crash bug was fixed when a daemon had its "path" set to "/", did - not have chroot enabled, and used some anchored excludes in the - rsyncd.conf file. - - - Fixed a bug in the transfer of a single file when -H is specified - that might have caused an infinite loop or perhaps a crash. - - - Fixed a case where the generator might try to tweak the write - permissions of a read-only directory in list-only mode. - - - If --compare-dest or --link-dest uses a locally-copied file as the - basis for an updated version, log this better when --verbose or -i - is in effect. - - - Fixed the accidental disabling of --backup during the --delete-after - processing. - - - Restored the ability to use the --address option in client mode (in - addition to its use in daemon mode). - - - Make sure that some temporary progress information from the delete - processing does not get left on the screen when it is followed by a - newline. - - - When --existing skips a directory with extra verbosity, refer to it - as a "directory", not a "file". - - - When transferring a single file to a different-named file, any - generator messages that are source-file related no longer refer to - the file by the destination filename. - - - Fixed a bug where hard-linking a group of files might fail if the - generator hasn't created a needed destination directory yet. - - - Fixed a bug where a hard-linked group of files that is newly-linked - to a file in a --link-dest dir doesn't link the files from the rest - of the cluster. - - - When deleting files with the --one-file-system (-x) option set, rsync - no longer tries to remove files from inside a mount-point on the - receiving side. - - - Fixed a compatibility problem when using --cvs-ignore (-C) and - sending files to an older rsync without using --delete. - - - Make sure that a "- !" or "+ !" include/exclude pattern does not - trigger the list-clearing action that is reserved for "!". - - - Avoid a timeout in the generator when the sender/receiver aren't - handling the generator's checksum output quickly enough. - - - Fixed the ommission of some directories in the delete processing when - --relative (-R) was combined with a source path that had a trailing - slash. - - - Make sure that --max-size doesn't affect a device or a symlink. - - - Make sure that a system with a really small MAXPATHLEN does not cause - the buffers in readfd_unbuffered() to be too small to receive normal - messages. (This mainly affected Cygwin.) - - - If a source filename ends with "..", treat it as if "../" had been - specified (so that we don't copy files to the parent dir of the - destination). - - - If --delete is combined with a file-listing rsync command (i.e. no - transfer is happening), avoid outputting a warning that we couldn't - delete anything. - - - If --stats is specified with --delete-after, ensure that all the - "deleting" messages are output before the statistics. - - - Improved one "if" in the deletion code that was only checking errno - for ENOTEMPTY when it should have also been checking for EEXIST. + - Changed the way --progress overwrites its prior output in order to make + it nearly impossible for the progress to get overwritten by an error. ENHANCEMENTS: - - Added the --only-write-batch=FILE option that may be used (instead - of --write-batch=FILE) to create a batch file without doing any - actual updating of the destination. This allows you to divert all - the file-updating data away from a slow data link (as long as you - are pushing the data to the remote server when creating the batch). - - - When the generator is taking a long time to fill up its output buffer - (e.g. if the transferred files are few, small, or missing), it now - periodically flushes the output buffer so that the sender/receiver - can get started on the files sooner rather than later. - - - Improved the keep-alive code to handle a long silence between the - sender and the receiver that can occur when the sender is receiving - the checksum data for a large file. + - Added the --remote-option=OPT (-M OPT) command-line option that is useful + for things like sending a remote --log-file=FILE or --fake-super option. - - Improved the auth-errors that are logged by the daemon to include - some information on why the authorization failed (wrong user, - password mismatch, etc.). (The client-visible message is unchanged.) + - Added the --info=FLAGS and --debug=FLAGS options to allow finer-grained + control over what is output. Added an extra type of --progress output + using --info=progress2. - - Improved the client's handling of an "@ERROR" from a daemon so that - it does not complain about an unexpectedly closed socket (since we - really did expect the socket to close). + - Added the --delete-missing option to delete user-specified files on the + receiver that are missing on the sender (normally the absence of user- + specified files generates an error). - - If the daemon can't open the log-file specified in rsyncd.conf, fall - back to using syslog (and log an appropriate warning). This is - better than what was typically a totally silent failure (since a - daemon is not usually run with the --no-detach option that was - necessary to see the error on stderr). + - Added a "T" (terabyte) category to the --human-readable size suffixes. - - The man pages now consistently refer to an rsync daemon as a "daemon" - to distinguish it from a server in a non-daemon transfer. + - Enhanced the --stats output: 1) to mention how many files were created + (protocol >= 28), 2) to mention how many files were deleted (new for + protocol 31), and 3) to follow the file-count, created-count, and + deleted-count with a break-out list of each count by type. - - Made a small change to the rrsync script (restricted rsync -- in the - support dir) to make a read-only server reject all --remove-* options - when sending files (to future-proof it against the possibility of - other similar options being added at some point). + - Added the --usermap/--groupmap/--chown options for manipulating file + ownership during the copy. - INTERNAL: + - Added the "%C" escape to the log-output handling, which will output the + MD5 checksum of any transferred file, or all files if --checksum was + specified (when protocol 30 or above is in effect). - - Rsync now calls setlocale(LC_CTYPE, "") to enable isprint() to better - discern which filename characters need to be escaped in messages. + - Added the "reverse lookup" parameter to the rsync daemon config file to + allow reverse-DNS lookups to be disabled. - - Improved the naming of the log-file open/reopen/close functions. + - Added a way for supplementary groups to be specified in the rsyncd.conf + file. Also made explicitly-set uid/gid values no longer ignored by a + daemon that was not run by a super-user. - - Removed some protocol compatibility code that was only needed to help - someone running a pre-release of 2.6.4. + EXTRAS: - BUILD CHANGES: + - Added an "instant-rsyncd" script to the support directory, which makes + it easy to configure a simple rsync daemon in the current directory. - - Fixed a bug in the SUPPORT{,_HARD}_LINKS defines which prevented - rsync from being built without symlink or hard-link support. + - Added the "mapfrom" and "mapto" scripts to the support directory, which + makes it easier to do user/group mapping in a local transfer based on + passwd/group files from another machine. - - You can use --disable-locale to turn off any use of setlocale(). + DEVELOPER RELATED: - - Configure now disables the use of mkstemp() under HP-UX (since they - refuse to fix its broken handling of large files). + - Added more conditional debug output. - - Configure now explicitly checks for the lseek64() function so that - the code can use HAVE_LSEEK64 instead of inferring lseek64()'s - presence based on the presence of the off64_t type. + - Really big numbers are now output using our own big-num routine rather + than casting them to a double and using a %.0f conversion. - - Some minor enhancements to the test scripts. + - The pool_alloc library has received some minor improvements in alignment + handling. - - Added a few new diffs to the patches dir, including a patch that - enables the optional copying of extended attributes. + - Added init_stat_x() function to avoid duplication of acl/xattr init code.