X-Git-Url: https://mattmccutchen.net/rsync/rsync.git/blobdiff_plain/9a933bc2ce8aae17f30925412e2cc0d14178d0cd..75fb17b891da5568773ee741ca5266edebe268c2:/Makefile.in

diff --git a/Makefile.in b/Makefile.in
index 3df63a99..e1249360 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -9,6 +9,8 @@ mandir=@mandir@
 LIBS=@LIBS@
 CC=@CC@
 CFLAGS=@CFLAGS@
+CPPFLAGS=@CPPFLAGS@
+EXEEXT=@EXEEXT@
 LDFLAGS=@LDFLAGS@
 
 INSTALLCMD=@INSTALL@
@@ -41,21 +43,30 @@ OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(DAEMON_OBJ) $(LIBOBJ) $(ZLIBOBJ) @BUILD_POPT@
 TLS_OBJ = tls.o syscall.o lib/permstring.o 
 
 # Programs we must have to run the test cases
-CHECK_PROGS = rsync tls getgroups trimslash t_unsafe
+RSYNC_EXE=rsync$(EXEEXT)
+TLS_EXE=tls$(EXEEXT)
+GETGROUPS_EXE=getgroups$(EXEEXT)
+TRIMSLASH_EXE=trimslash$(EXEEXT)
+T_UNSAFE_EXE=t_unsafe$(EXEEXT)
+CHECK_PROGS=$(RSYNC_EXE) $(TLS_EXE) $(GETGROUPS_EXE) \
+	$(TRIMSLASH_EXE) $(T_UNSAFE_EXE)
+
+# Objects for CHECK_PROGS to clean
+CHECK_OBJS=getgroups.o t_stub.o t_unsafe.o trimslash.o
 
 # note that the -I. is needed to handle config.h when using VPATH
 .c.o:
 @OBJ_SAVE@
-	$(CC) -I. -I$(srcdir) $(CFLAGS) -c $< @CC_SHOBJ_FLAG@
+	$(CC) -I. -I$(srcdir) $(CFLAGS) $(CPPFLAGS) -c $< @CC_SHOBJ_FLAG@
 @OBJ_RESTORE@
 
-all: rsync
+all: $(RSYNC_EXE)
 
 man: rsync.1 rsyncd.conf.5
 
 install: all
 	-mkdir -p ${DESTDIR}${bindir}
-	${INSTALLCMD} ${STRIP} -m 755 rsync ${DESTDIR}${bindir}
+	${INSTALLCMD} ${STRIP} -m 755 $(RSYNC_EXE) ${DESTDIR}${bindir}
 	-mkdir -p ${DESTDIR}${mandir}/man1
 	-mkdir -p ${DESTDIR}${mandir}/man5
 	${INSTALLMAN} -m 644 $(srcdir)/rsync.1 ${DESTDIR}${mandir}/man1
@@ -64,24 +75,24 @@ install: all
 install-strip:
 	$(MAKE) STRIP='-s' install
 
-rsync: $(OBJS)
+$(RSYNC_EXE): $(OBJS)
 	@echo "Please ignore warnings below about mktemp -- it is used in a safe way"
-	$(CC) $(CFLAGS) $(LDFLAGS) -o rsync $(OBJS) $(LIBS)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
 
 $(OBJS): config.h
 
-tls: $(TLS_OBJ)
+$(TLS_EXE): $(TLS_OBJ)
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TLS_OBJ) $(LIBS)
 
-getgroups: getgroups.o
+$(GETGROUPS_EXE): getgroups.o
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)
 
 TRIMSLASH_OBJ = trimslash.o syscall.o
-trimslash: $(TRIMSLASH_OBJ)
+$(TRIMSLASH_EXE): $(TRIMSLASH_OBJ)
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)
 
 T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o t_stub.o lib/compat.o lib/snprintf.o
-t_unsafe: $(T_UNSAFE_OBJ)
+$(T_UNSAFE_EXE): $(T_UNSAFE_OBJ)
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)
 
 # I don't like these rules because CVS can skew the timestamps and
@@ -106,7 +117,7 @@ proto:
 	cat $(srcdir)/*.c $(srcdir)/lib/compat.c | awk -f $(srcdir)/mkproto.awk > $(srcdir)/proto.h
 
 clean: cleantests
-	rm -f *~ $(OBJS) rsync $(TLS_OBJ) $(CHECK_PROGS)
+	rm -f *~ $(OBJS) $(TLS_OBJ) $(CHECK_PROGS) $(CHECK_OBJS)
 
 cleantests:
 	rm -rf ./testtmp*
@@ -151,14 +162,14 @@ test: check
 # might lose in the future where POSIX diverges from old sh.
 
 check: all $(CHECK_PROGS)
-	POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin=`pwd`/rsync srcdir="$(srcdir)" $(srcdir)/runtests.sh
+	POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin=`pwd`/$(RSYNC_EXE) srcdir="$(srcdir)" $(srcdir)/runtests.sh
 
 # This does *not* depend on building or installing: you can use it to
 # check a version installed from a binary or some other source tree,
 # if you want.
 
 installcheck: $(CHECK_PROGS)
-	POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync" srcdir="$(srcdir)" $(srcdir)/runtests.sh
+	POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/$(RSYNC_EXE)" srcdir="$(srcdir)" $(srcdir)/runtests.sh
 
 # TODO: Add 'dist' target; need to know which files will be included