X-Git-Url: https://mattmccutchen.net/rsync/rsync.git/blobdiff_plain/9624b8642670a3bd79b90e1c2c0ebbc5bf1b635b..dd18526e5bb61852016158b9eaacc4f0c0d00c20:/NEWS diff --git a/NEWS b/NEWS index b87a6aad..edbd15ff 100644 --- a/NEWS +++ b/NEWS @@ -7,6 +7,26 @@ Changes since 2.6.3: - When rsync deletes a directory and outputs a verbose message about it, it now appends a trailing slash to the name instead of (only sometimes) outputting a preceding "directory " string. + + - The --stats output will contain file-list time-statistics if both + sides are 2.6.4, or if the local side is 2.6.4 and the files are + being pushed (since the stats come from the sending side). + (Requires protocol 29 for a pull.) + + - The "%o" (operation) log-format escape now has a third value (besides + "send" and "recv"): "del." (with trailing dot to make it 4 chars). + This changes the way deletions are logged in the daemon's log file. + + - When the --log-format option is combined with --verbose, rsync now + avoids outputting the name of the file twice in most circumstances. + As long as the --log-format item does not refer to any post-transfer + items (such as %b or %c), the --log-format message is output prior to + the transfer with --verbose being the equivalent of a --log-format of + '%n%L' (which outputs the name and any symlink info). If the log + output must occur after the transfer to be complete, the only time + the name is also output prior to the transfer is when --progress was + specified (so that the name will precede the progress stats, and the + full --log-format output will come after). BUG FIXES: @@ -14,16 +34,24 @@ Changes since 2.6.3: was only treating it as a special token in an rsync include/exclude file). + - The combination of --verbose and --dry-run now mentions the full list + of changes that would be output without --dry-run. + - Avoid a mkdir warning when removing a directory in the destination that already exists in the --backup-dir. - - An OS that has a binary mode for its files (such as cygwin0 needed + - An OS that has a binary mode for its files (such as cygwin) needed setmode(fd, O_BINARY) called on the temp-file we opened with - mkstemp(). (Fix picked up from the cygwin package.) + mkstemp(). (Fix derived from the cygwin's 2.6.3 rsync package.) - Fixed a potential hang when verbosity is high, the client side is the sender, and the file-list is large. + - Fixed a potential protocol-corrupting bug where the generator + might accidentally merge a message from the receiver into the + middle of a multiplexed packet of data that is waiting for the + socket to allow it to flush. + - We now check if the OS doesn't support using mknod() for creating FIFOs and sockets, and compile-in using mkfifo() and socket() when necessary. @@ -32,70 +60,139 @@ Changes since 2.6.3: - One place in the code wasn't checking if fork() failed. - - The "ignore nonreadable" daemon parameter no longer affects symlinks - that are being copied, even if they point nowhere. + - The "ignore nonreadable" daemon parameter used to erroneously affect + symlinks that pointed to a non-existent file. This has been fixed. - - If the OS does not have lchown() and its chown() tries to set the - referent of a symlink (as it should), we no longer try to set the - user and group of a symlink. + - If the OS does not have lchown() and a chown() of a symlink will + affect the referent of a symlink (as it should), we no longer try + to set the user and group of a symlink. - The generator now properly runs the hard-link loop and the dir-time rewriting loop after we're sure that the redo phase is complete. - - When --backup was specified with --partial-dir=DIR, don't try to - backup a file in DIR when DIR is relative. + - When --backup was specified with --partial-dir=DIR (where DIR is a + relative path), the backup code was erroneously trying to backup a + file that was put into the partial-dir. + + - If a file gets resent in a single transfer and the --backup option is + enabled along with --inplace, rsync no longer performs a duplicate + backup (it used to overwrite the first backup with the failed file). + + - One call to flush_write_file() was not being checked for an error. + + - The --no-relative option was not being sent from the client to a + server sender. + + - If an rsync daemon specified "dont compress = ..." for a file and the + client tried to specify --compress, the libz code was not handling a + compression level of 0 properly. This could cause a transfer failure + if the block-size for a file was large enough (e.g. rsync might have + exited with an error for large files). + + - Fixed a bug that would sometimes surface when using --compress and + sending a file with a block-size larger than 64K (either manually + specified, or computed due to the file being really large). Prior + versions of rsync would sometimes fail to decompress the data + properly, and thus the transferred file would fail its verification. + + - If a daemon can't open the specified log file (i.e. syslog is not + being used), die without crashing. We also output an error about + the failure on stderr (which will only be seen if --no-detach was + specified). + + - A local transfer no longer duplicates all its include/exclude options + (since the forked process already has a copy of the exclude list, + there's no need to send them a set of duplicates). + + - When --progress is specified, the output of items that the generator + is creating (e.g. dirs, symlinks) is now integrated into the progress + output without overlapping it. (Requires protocol 29.) + + - When --timeout is specified, lulls that occur in the transfer while + the generator is doing work that does not generate socket traffic + (looking for changed files, deleting files, doing directory-time + touch-ups, etc.) will cause a new keep-alive packet to be sent that + should keep the transfer going as long as the generator continues to + make progress. (Requires protocol 29.) + + - The stat size of a device is not added to the total file size of the + items in the transfer since the size might be undefined on some OSes. + + - Fixed a problem with refused-option messages sometimes not making it + back to the client side when a remote --files-from was in effect and + the daemon was the receiver. + + - The --compare-dest option was not updating a file that differred in + (the preserved) attributes from the version in the compare-dest DIR. + + - When rsync is copying files into a write-protected directory, fixed + the changed-report output for the directory so that we don't report + an identical directory as changed. ENHANCEMENTS: - Rsync now supports popt's option aliases, which means that you can use /etc/popt and/or ~/.popt to create your own option aliases. - - Added the --copy-dest option, which works like --link-dest except - that it includes copies of identical files. - - - Added support for specifying multiple --compare-dest, --copy-dest, or - --link-dest options, but only of a single type. (Promoted from the - patches dir and enhanced.) + - Added the --delete-during (--del) option which will delete files + from the receiving side incrementally as each directory in the + transfer is being processed. This makes it more efficient than the + default, before-the-transfer behavior, which is now available as + --delete-before (and is still the default --delete-WHEN option that + will be chosen if --delete or --delete-excluded is specified without + a --delete-WHEN choice). All the --del* options infer --delete, so + an rsync daemon that refuses "delete" will still refuse to allow any + file-deleting options. + + - All the --delete-WHEN options are now more memory efficient: + Previously an entire duplicate set of file-list objects was created + on the receiving side for the entire destination hierarchy. The new + algorithm only creates one directory of objects at a time (for files + inside the transfer). + + - Added support for specifying multiple --compare-dest or --link-dest + options, but only of a single type. (Promoted from the patches dir + and enhanced.) (Requires protocol 29.) - Added the --max-size option. (Promoted from the patches dir.) - The daemon-mode options were separated from the normal rsync options so that they can't be mixed together. This makes it impossible to start a daemon that had improper default option values that could - cause problems (such as a hang or an abort) when a client connects. + cause problems when a client connects (e.g. a hang or an abort). - The --bwlimit option may now be used in combination with --daemon - to specify a default value for the daemon side and also a value + to specify both a default value for the daemon side and a value that cannot be exceeded by a user-specified --bwlimit option. - Added the "port" parameter to the rsyncd.conf file. (Promoted from - the patches dir.) + the patches dir.) Also added "address". A command-line option + will take precedence over a config-file option, as expected. - In _exit_cleanup(): when we are exiting with a partially-received file, we now flush any data in the write-cache before closing the partial file. - - The --inplace support was enhanced to work with --compare-dest, - --link-dest, and (the new) --copy-dest options. + - The --inplace support was enhanced to work with --compare-dest and + --link-dest. (Requires protocol 29.) - Added the --dirs (-d) option for an easier way to copy directories without recursion. - - Added the --list-only option which is mainly a way for the client to + - Added the --list-only option, which is mainly a way for the client to put the server into listing mode without needing to resort to any - option kluges (e.g. the age-old use of "-r --exclude="/*/*" for a - non-recursive listing). - - - Added the --omit-dir-times (-O) option which will avoid updating the - modified time for directories when --times was specified. For a - really large transfer, this option will avoid an extra pass through - the file-list at the end of the transfer to tweak all the directory - times. - - - Added the --delete-during (--del) option which will delete files - from on the receiving side incrementally as each directory in the - transfer is being processed (which makes it more efficient than - the default, before-the-transfer behavior of --delete). + internal option kluges (e.g. the age-old use of "-r --exclude="/*/*" + for a non-recursive listing). This option is used automatically + (behind the scenes) when a modern rsync speaks to a modern daemon, + but may also be specified manually if you want to force the use of + the --list-only option over a remote-shell connection. + + - Added the --omit-dir-times (-O) option, which will avoid updating + the modified time for directories when --times was specified. This + option will avoid an extra pass through the file-list at the end of + the transfer (to tweak all the directory times), which can result in + an appreciable speedup for a really large transfer. (Promoted from + the patches dir.) - Added the --filter (-f) option and its helper option, -F. Filter rules are an extension to the existing include/exclude handling @@ -103,20 +200,165 @@ Changes since 2.6.3: filter files (like .cvsignore, but with full filter-rule parsing). This new option was chosen in order to ensure that all existing include/exclude processing remained 100% compatible with older - versions. - - - Added support/atomic-rsync -- a perl script that will transfer some - files using rsync, and then move the updated files into place all at - once at the end of the transfer. Only works when pulling, and uses - --link-dest. + versions. Protocol 29 is needed for full filter-rule support, but + backward-compatible rules work with earlier protocol versions. + (Promoted from the patches dir and enhanced.) + + - Added the --delay-updates option that puts all updated files into + a temporary directory (by default ".~tmp~", but settable via the + --partial-dir=DIR option) until the end of the transfer. This + makes the updates a little more atomic for a large transfer. + + - If rsync is put into the background, any output from --progress is + reduced. + + - Documented the "max verbosity" setting for rsyncd.conf. (This + setting was added a couple releases ago, but left undocumented.) + + - The sender and the generator now double-check the file-list index + they are given, and refuse to try to do a file transfer on a + non-file index (since that would indicate that something had gone + very wrong). + + - Added the --itemize-changes (-i) option, which is a way to output a + more detailed list of what files changed in any way and how they + changed. The effect is the same as specifying a --log-format of + "%i %n%L" (see the rsyncd.conf manpage). Works with --dry-run too. + + - Added the --fuzzy option, which attempts to find a basis file for a + file that is being created from scratch. The current algorithm + only looks in the destination directory for the created file, but + it does attempt to find a match based on size/mod-time (in case the + file was renamed with no other changes) as well as based on a fuzzy + name-matching algorithm. This option requires protocol 29 because + it needs the new file-sorting order. (Promoted from patches dir + and enhanced.) (Requires protocol 29.) + + - Added the --remove-sent-files option, which lets you move files + between systems. + + - The hostname in HOST:PATH or HOST::PATH may now be an IPv6 literal + enclosed in '[' and ']' (e.g. "[::1]"). (We already allowed IPv6 + literals in the rsync://HOST:PORT/PATH format.) + + - When building under windows, the default for --daemon is now to + avoid detaching, requiring the new --detach option to force rsync + to detach. + + - Improved the option descriptions in the --help text. + + SUPPORT FILES: + + - Added atomic-rsync to the support dir: a perl script that will + transfer some files using rsync, and then move the updated files into + place all at once at the end of the transfer. Only works when + pulling, and uses --link-dest and a parallel hierarchy of files to + effect its update. + + - Added mnt-excl to the support dir: a perl script that takes the + /proc/mounts file and translates it into a set of excludes that will + exclude all mount points (even mapped mounts to the same disk). The + excludes are made relative to the specified source dir and properly + anchored. + + - Added savetransfer.c to the support dir: a C program that can make + a copy of all the data that flows over the wire. This lets you test + for data corruption (by saving the data on both the sending side and + the receiving side) or provides a way to help debug a protocol error. + + - Added rrsync to the support dir: this is my version of Joe Smith's + restricted rsync perl script. This helps to ensure that only certain + rsync commands can be run by an ssh invocation. INTERNAL: - - Added better checking of the checksum header values that come over + - Added better checking of the checksum-header values that come over the socket. - - Improved the type of some variables for consistency and proper size. + - Merged a variety of file-deleting functions into a single function so + that it is easier to maintain. + + - Improved the type of some variables (particularly blocksize vars) for + consistency and proper size. + + - Got rid of the uint64 type (which we didn't need). + + - Use a slightly more compatible set of core #include directives. + + - Defined int32 in a way that ensures that the build dies if we can't + find a variable with at least 32 bits. + + - The daemon's "read only" config item now sets an internal read_only + variable that makes extra sure that no write/delete calls on the + read-only side can succeed. + + PROTOCOL DIFFERENCES FOR VERSION 29: + + - A 16-bit flag-word is transmitted after every file-list index. This + indicates what is changing between the sender and the receiver. The + generator now transmits an index and a flag-word to indicate when + dirs and symlinks have changed (instead of producing a message), + which makes the outputting of the information more consistent and + less prone to screen corruption (because either the receiver or the + sender is now outputting all the file-change info). + + - If a file is being hard-linked, the appropriate bit is enabled in + the flag-word and the name of the file that was linked immediately + follows in vstring format (see below). + + - If a file is being transferred with an alternate-basis file, the + appropriate bit is enabled in the flag-word and a single-byte + follows, indicating what type of basis file was chosen. If that + indicates that a fuzzy-match was selected, the name of the match + immediately follows in vstring format. A vstring is a variable + length string that has its size written prior to the string, and + no terminating null. If the string is from 1-127 bytes, the length + is a single byte. If it is from 128-32767 bytes, the length is + written as ((len >> 8) | 0x80) followed by (len % 0x100). + + - The sending of exclude names is done using filter-rule syntax. This + means that all names have a prefixed rule indicator, even excludes + (which used to be sent as a bare pattern, when possible). The -C + option will include the per-dir .cvsignore merge file in the list of + filter rules so it is positioned correctly (unlike in some older + transfer scenarios). + + - Rsync sorts the filename list in a different way: it sorts the subdir + names after the non-subdir names for each dir's contents, and it + always puts a dir's contents immediately after the dir's name in the + list. (Previously an item named "foo.txt" would sort in between + directory "foo/" and "foo/bar".) + + - When talking to a protocol 29 rsync daemon, a list-only request + is able to note this before the options are sent over the wire and + the new --list-only option is included in the options. + + - When the --stats bytes are sent over the wire (or stored in a batch), + they now include two elapsed-time values: one for how long it took to + build the file-list, and one for how long it took to send it over the + wire (each expressed in thousandths of a second). + + - When --delete-excluded is specified with some filter excludes, a + client sender will now initiate a send of the filter rules to the + receiver (older protocols used to omit the sending of excludes in + this situation since there were no receiver-specific rules that + survived --delete-excluded back then). Note that, as with all the + filter-list sending, only items that are significant to the other + side will actually be sent over the wire, so the filter-rule list + is often empty in this scenario. + + - A protocol-29 batch file includes a bit for the setting of the --dirs + option. Also, the shell script created by --write-batch will use the + --filter option instead of --exclude-from to capture any filter rules. + + - An index equal to the file-list count is sent as a keep-alive packet + from the generator to the sender, which then forwards it on to the + receiver. This normally invalid index is only a valid keep-alive + packet if the 16-bit flag-word that follows it contains a single bit + (ITEM_IS_NEW, which is normally an illegal flag to appear alone). BUILD CHANGES: - Handle an operating system that use mkdev() in place of makedev(). + + - Improved configure to better handle cross-compiling.