X-Git-Url: https://mattmccutchen.net/rsync/rsync.git/blobdiff_plain/8b46340924320180ee838bc1ff67c4d6dd3fbc30..0417c34e2d641cbac292ba5cf8a619249c87d4e3:/NEWS diff --git a/NEWS b/NEWS index 910adf31..9debef79 100644 --- a/NEWS +++ b/NEWS @@ -1,179 +1,71 @@ -NEWS for rsync 2.6.1 (UNRELEASED) -Protocol: 28 (changed) -Changes since 2.6.0: - - ENHANCEMENTS: - - * Lower memory use and more optimal transfer of data over - the socket (see the INTERNAL section for details). - - * The RSYNC_PROXY environment variable can now contain a - "USER:PASS@" prefix before the "HOST:PORT" information. - (Bardur Arantsson) - - * The --progress output now mentions how far along in the - transfer we are, including both a count of files transferred - and a percentage of the total file-count that we've processed. - It also shows better current-rate-of-transfer and remaining- - transfer-time values. - - * The configure script now accepts --with-rsyncd-conf=PATH - to override the default value of the /etc/rsyncd.conf file. - - * Added a couple extra diffs in the "patches" dir, removed the - ones that got applied, and rebuilt the rest. +NEWS for rsync 2.6.7 (UNRELEASED) +Protocol: 29 (unchanged) +Changes since 2.6.6: BUG FIXES: - * When -x (--one-file-system) is combined with -L (--copy-links) - or --copy-unsafe-links, no symlinked files are skipped, even - if the referent file is on a different filesystem. - - * The --link-dest code now works properly for a non-root user - when (1) the UIDs of the source and destination differ and -o - was specified, or (2) when the group of the source can't be - used on the destination and -g was specified. - - * Fixed a bug in the handling of -H (hard-links) that might - cause the expanded PATH/NAME value of the current item to - get overwritten (due to an expanded-name caching bug). - - * We now reset the "new data has been sent" flag at the start - of each file we send. This makes sure that an interrupted - transfer with the --partial option set doesn't keep a shorter - temp file than the current basis file when no new data has been - transfered over the wire for that file. - - * Fixed a byte-order problem in --batch-mode on big-endian - machines. (Jay Fenlason) - - * Fixed configure bug when running "./configure --disable-ipv6". - - * Fixed "make test" bug when build dir is not the source dir. - - * When using --cvs-exclude, the exclude items we get from a - directory's .cvsignore file once again only affect that one - directory (and not all following directories too). The - items are also now properly word-split and parsed without - any +/- prefix munging. - - * When specifying the USER@HOST: prefix for a file, the USER - part can now contain an '@', if needed (i.e. the last '@' - is used to find the HOST, not the first). - - * Fixed some bugs in the handling of group IDs for non-root - users: (1) It properly handles a group that the sender didn't - have a name for (it would previously skip changing the group - on any files in that group). (2) If --numeric-ids is used, - rsync no longer attempts to set groups that the user doesn't - have the permission to set. - - * Fixed the "refuse options" setting in the rsyncd.conf file. - - * Improved the -x (--one-file-system) flag's handling of any - mount-point directories we encounter. It is both more optimal - (in that it no longer does a useless scan of the contents of - the mount-point dirs) and also fixes a bug where a remapped - mount of the original filesystem could get discovered in a - subdir we should be ignoring. - - * Rsync no longer discards a double-slash at the start of a filename - when trying to open the file. It also no longer constructs names - that start with a double slash (unless the user supplied them). - - * Path-specifying options to a daemon should now work the same with - or without chroot turned on. Previously, such an option (such as - --link-dest) would get munged into relative path if chroot was not - on, making the option fairly useless. Rsync now transforms the - path into one that is based on the module's root dir, just as if - chroot were enabled. - - * Fixed compilation problem on Tru64 Unix (having to do with - sockaddr.sa_len and sockaddr.sin_len). - - * Fixed a compatibility problem interacting with older rsync - versions that might send us an empty --suffix value without - telling us that --backup-dir was specified. - - * The "hosts allow" option for a daemon-over-remote-shell - process now has improved support for IPv6 addresses and a fix - for systems that have a length field in their socket structs. - - * Fixed the ability to request an empty backup suffix when - sending files to an rsync daemon. + - Made hard-links work with symlinks and devices again. - INTERNAL: + - If a device-file/special-file changes permissions, rsync now updates the + permissions without recreating the file. - * Most of the I/O is now buffered, which results in a pretty - large speedup when running under MS Windows. (Craig Barratt) + - If the user specifies a remote-host for both the source and destination, + we now output a syntax error rather than trying to open the destination + hostspec as a filename. - * Optimizations to the name-handling/comparing code have made - some significant reductions in user-CPU time for large file - sets. + - When --inplace creates a new destination file, rsync now creates it with + permissions 0600 instead of 0000 -- this makes restarting possible when + the transfer gets interrupted in the middle of sending a new file. - * Some variable-type cleanup that makes the code more consistent. + - Reject the combination of --inplace and --sparse since the sparse-output + algorithm doesn't work when overwriting existing data. - * Reduced memory requirements of hard link preservation. - (J.W. Schultz) + - Fixed the directory name in the error that is output when pop_dir() + fails. - * Implemented a new algorithm for hard-link handling that speeds - up the code significantly. (J.W. Schultz and Wayne Davison) + - Really fixed the parsing of a "!" entry in .cvsignore files this time. - * The --hard-link option now uses the first existing file in the - group of linked files as the basis for the transfer. This - prevents the sub-optimal transfer of a file's data when a new - hardlink is added on the sending side and it sorts alphabetically - earlier in the list than the files that are already present on the - receiving side. + - Several diffs in the patches dir now use the proper --enable-FOO + configure option instead of --with-FOO to turn on the inclusion of + the newly patched feature. - * Dropped support for protocol versions less than 20 - (2.3.0 released 15 Mar 1999) and activated warnings for - protocols less than 25 (2.5.0 released 23 Aug 2001) - (Wayne Davison and J.W. Schultz, severally) + ENHANCEMENTS: - * More optimal data transmission for --hard-links (protocol 28). + - Added the --append option that makes rsync append data onto files + that are longer on the source than the destination (this includes new + files). - * More optimal data transmission for --checksum (protocol 28). + - If lutimes() and/or lchmod() are around, use them to allow the + preservation of attributes on symlinks. - * Less memory is used when --checksum is specified. + - Added two config items to the rsyncd.conf parsing: "pre-xfer exec" + and "post-xfer exec". These allow a command to be specified on a + per-module basis that will be run before and/or after a daemon-mode + transfer. - * Less memory is used in the file list (a per-file savings). + - When using the --relative option, you can now insert a dot dir in + the source path to indicate where the replication of the source dirs + should start. For example, if you specify a source path of + rsync://host/module/foo/bar/./baz/dir with -R, rsync would only + replicate the "baz/dir" part of the source path (note: a trailing + dot dir is unaffected unless it also has a trailing slash). - * The generator is now better about not modifying the file list - during the transfer in order to avoid a copy-on-write memory - bifurcation (on systems where fork() uses shared memory). - Previously, rsync's shared memory would slowly become unshared, - resulting in real memory usage nearly doubling on the receiving - side by the end of the transfer. Now, as long as permissions - are being preserved, the shared memory should remain that way - for the entire transfer. + - Added some new --no-FOO options that make it easier to override + unwanted implied or default options. For example, "-a --no-o" (aka + "--archive --no-owner") can be used to turn off the preservation of + file ownership that is implied by -a. - * Changed hardlink info and file_struct + strings to use - allocation pools. This reduces memory use for large file- - sets and permits freeing memory to the OS. (J.W. Schultz) + - Allow the --temp-dir option to be specified when starting a daemon, + which sets the default temporary directory for incoming files. - * The 2 pipes used between the receiver and generator processes - (which are forked on the same machine) were reduced to 1 pipe - and the protocol improved so that (1) it is now impossible to - have the "redo" pipe fill up and hang rsync, and (2) trailing - messages from the receiver don't get lost on their way through - the generator over to the sender (the latter mainly affected - hard-link messages and verbose --stats output). + - Some minor documentation improvements. - * The reading & writing of the file-list in batch-mode is now - handled by the same code that sends & receives the list over - the wire. This makes it much easier to maintain. + - Updated some diffs in the patches dir. - * Improved the internal uid/gid code to be more portable and - a little more optimized. + INTERNAL: - * The device numbers sent when using --devices are now sent as - separate major/minor values with 32-bit accuracy (protocol 28). - Previously, the copied devices were sent as a single 32-bit - number. This will make inter-operation of 64-bit binaries more - compatible with their 32-bit brethren. Note that optimizations - in the binary protocol often sends the device data using fewer - bytes than before, even though more precision is now available. + - Some buffer sizes were expanded a bit, particularly on systems where + MAXPATHLEN is overly small (e.g. cygwin). - * Some cleanup of the exclude/include structures and its code - made things clearer, simpler, and more efficient. + - If io_printf() tries to format more data than fits in the buffer, exit + with an error instead of transmitting a truncated buffer.