X-Git-Url: https://mattmccutchen.net/rsync/rsync.git/blobdiff_plain/6a819e02daa73cabecdfb5cc354a69a2d706e65d..1ed9018e69a0d224ff59184974d9150d1cb8814d:/testsuite/itemize.test

diff --git a/testsuite/itemize.test b/testsuite/itemize.test
index d227d6c0..72780345 100644
--- a/testsuite/itemize.test
+++ b/testsuite/itemize.test
@@ -2,7 +2,7 @@
 
 # Copyright (C) 2005 by Wayne Davison <wayned@samba.org>
 
-# This program is distributable under the terms of the GNU GPL see
+# This program is distributable under the terms of the GNU GPL (see
 # COPYING).
 
 # Test the output of various copy commands to ensure itemized output
@@ -10,26 +10,11 @@
 
 . "$suitedir/rsync.fns"
 
-set -x
-
-lddir="$tmpdir/ld"
+to2dir="$tmpdir/to2"
 
 chkfile="$scratchdir/rsync.chk"
 outfile="$scratchdir/rsync.out"
 
-# This is only called if rsync was run with -v or -vv (not -i alone).
-# Higher levels of -v would require more filtering.
-filter_outfile() {
-    sed -e '/^building file list /d' \
-	-e '/^created directory /d' \
-	-e '/^done$/d' \
-	-e '/ --whole-file$/d' \
-	-e '/^total: /d' \
-	-e '/^$/,$d' \
-	<"$outfile" >"$outfile.new"
-    mv "$outfile.new" "$outfile"
-}
-
 makepath "$fromdir/foo"
 makepath "$fromdir/bar/baz"
 cp -p "$srcdir/configure.in" "$fromdir/foo/config1"
@@ -40,18 +25,42 @@ umask 0
 ln -s ../bar/baz/rsync "$fromdir/foo/sym"
 umask 022
 ln "$fromdir/foo/config1" "$fromdir/foo/extra"
+rm -f "$to2dir"
+
+# Check if rsync is set to hard-link symlinks.
+confile=`echo "$scratchdir" | sed 's;/testtmp/itemize$;/config.h;'`
+if egrep '^#define CAN_HARDLINK_SYMLINK 1' "$confile" >/dev/null; then
+    L=hL
+else
+    L=cL
+fi
+
+# Check if rsync can preserve time on symlinks
+case "$RSYNC" in
+*protocol=2*)
+    T=.T
+    ;;
+*)
+    if $RSYNC --version | grep ", symtimes" >/dev/null; then
+	T=.t
+    else
+	T=.T
+    fi
+    ;;
+esac
 
 $RSYNC -iplr "$fromdir/" "$todir/" \
     | tee "$outfile"
 cat <<EOT >"$chkfile"
-cd++++++ bar/
-cd++++++ bar/baz/
->f++++++ bar/baz/rsync
-cd++++++ foo/
->f++++++ foo/config1
->f++++++ foo/config2
->f++++++ foo/extra
-cL++++++ foo/sym -> ../bar/baz/rsync
+cd$all_plus ./
+cd$all_plus bar/
+cd$all_plus bar/baz/
+>f$all_plus bar/baz/rsync
+cd$all_plus foo/
+>f$all_plus foo/config1
+>f$all_plus foo/config2
+>f$all_plus foo/extra
+cL$all_plus foo/sym -> ../bar/baz/rsync
 EOT
 diff $diffopt "$chkfile" "$outfile" || test_fail "test 1 failed"
 
@@ -63,10 +72,10 @@ chmod 601 "$fromdir/foo/config2"
 $RSYNC -iplrH "$fromdir/" "$todir/" \
     | tee "$outfile"
 cat <<EOT >"$chkfile"
->f..T... bar/baz/rsync
->f..T... foo/config1
->f.sTp.. foo/config2
-hf..T... foo/extra => foo/config1
+>f..T.$dots bar/baz/rsync
+>f..T.$dots foo/config1
+>f.sTp$dots foo/config2
+hf..T.$dots foo/extra => foo/config1
 EOT
 diff $diffopt "$chkfile" "$outfile" || test_fail "test 2 failed"
 
@@ -83,11 +92,11 @@ chmod 777 "$todir/bar/baz/rsync"
 $RSYNC -iplrtc "$fromdir/" "$todir/" \
     | tee "$outfile"
 cat <<EOT >"$chkfile"
-.f..tp.. bar/baz/rsync
-.d..t... foo/
-.f..t... foo/config1
->fcstp.. foo/config2
-cL..T... foo/sym -> ../bar/baz/rsync
+.f..tp$dots bar/baz/rsync
+.d..t.$dots foo/
+.f..t.$dots foo/config1
+>fcstp$dots foo/config2
+cLc$T.$dots foo/sym -> ../bar/baz/rsync
 EOT
 diff $diffopt "$chkfile" "$outfile" || test_fail "test 3 failed"
 
@@ -101,7 +110,7 @@ cat <<EOT >"$chkfile"
 bar/baz/rsync is uptodate
 foo/config1 is uptodate
 foo/config2
-"foo/extra" is a hard link
+foo/extra is uptodate
 foo/sym is uptodate
 EOT
 diff $diffopt "$chkfile" "$outfile" || test_fail "test 4 failed"
@@ -112,15 +121,15 @@ $RSYNC -ivvplrtH "$fromdir/" "$todir/" \
     | tee "$outfile"
 filter_outfile
 cat <<EOT >"$chkfile"
-.d       ./
-.d       bar/
-.d       bar/baz/
-.f...p.. bar/baz/rsync
-.d       foo/
-.f       foo/config1
->f..t... foo/config2
-hf       foo/extra
-.L       foo/sym -> ../bar/baz/rsync
+.d$allspace ./
+.d$allspace bar/
+.d$allspace bar/baz/
+.f...p$dots bar/baz/rsync
+.d$allspace foo/
+.f$allspace foo/config1
+>f..t.$dots foo/config2
+hf$allspace foo/extra
+.L$allspace foo/sym -> ../bar/baz/rsync
 EOT
 diff $diffopt "$chkfile" "$outfile" || test_fail "test 5 failed"
 
@@ -139,148 +148,155 @@ touch "$todir/foo/config2"
 $RSYNC -iplrtH "$fromdir/" "$todir/" \
     | tee "$outfile"
 cat <<EOT >"$chkfile"
-.f...p.. foo/config1
->f..t... foo/config2
+.f...p$dots foo/config1
+>f..t.$dots foo/config2
 EOT
 diff $diffopt "$chkfile" "$outfile" || test_fail "test 7 failed"
 
-mv "$todir" "$lddir"
-$RSYNC -ivvplrtH --copy-dest="$lddir" "$fromdir/" "$todir/" \
+$RSYNC -ivvplrtH --copy-dest=../to "$fromdir/" "$to2dir/" \
     | tee "$outfile"
 filter_outfile
+case `tail -1 "$outfile"` in
+cLc.t*)
+    sym_dots="c.t.$dots"
+    L_sym_dots="cL$sym_dots"
+    is_uptodate='-> ../bar/baz/rsync'
+    echo "cL$sym_dots foo/sym $is_uptodate" >"$chkfile.extra"
+    L=cL
+    ;;
+*)
+    sym_dots="$allspace"
+    L_sym_dots=".L$allspace"
+    is_uptodate='is uptodate'
+    touch "$chkfile.extra"
+    ;;
+esac
 cat <<EOT >"$chkfile"
-.d..t... ./
-cd++++++ bar/
-cd++++++ bar/baz/
-cf       bar/baz/rsync
-cd++++++ foo/
-cf       foo/config1
-cf       foo/config2
-hf       foo/extra => foo/config1
-cL..T... foo/sym -> ../bar/baz/rsync
+cd$allspace ./
+cd$allspace bar/
+cd$allspace bar/baz/
+cf$allspace bar/baz/rsync
+cd$allspace foo/
+cf$allspace foo/config1
+cf$allspace foo/config2
+hf$allspace foo/extra => foo/config1
+cL$sym_dots foo/sym -> ../bar/baz/rsync
 EOT
 diff $diffopt "$chkfile" "$outfile" || test_fail "test 8 failed"
 
-rm -rf "$todir"
-$RSYNC -iplrtH --copy-dest="$lddir" "$fromdir/" "$todir/" \
+rm -rf "$to2dir"
+$RSYNC -iplrtH --copy-dest=../to "$fromdir/" "$to2dir/" \
     | tee "$outfile"
-cat <<EOT >"$chkfile"
-.d..t... ./
-cd++++++ bar/
-cd++++++ bar/baz/
-cd++++++ foo/
-hf       foo/extra => foo/config1
+cat - "$chkfile.extra" <<EOT >"$chkfile"
+hf$allspace foo/extra => foo/config1
 EOT
 diff $diffopt "$chkfile" "$outfile" || test_fail "test 9 failed"
 
-rm -rf "$todir"
-$RSYNC -vvplrtH --copy-dest="$lddir" "$fromdir/" "$todir/" \
+rm -rf "$to2dir"
+$RSYNC -vvplrtH --copy-dest="$todir" "$fromdir/" "$to2dir/" \
     | tee "$outfile"
 filter_outfile
 cat <<EOT >"$chkfile"
-./
-bar/
-bar/baz/
+./ is uptodate
+bar/ is uptodate
+bar/baz/ is uptodate
 bar/baz/rsync is uptodate
-foo/
+foo/ is uptodate
 foo/config1 is uptodate
 foo/config2 is uptodate
-"foo/extra" is a hard link
 foo/extra => foo/config1
-foo/sym is uptodate
+foo/sym $is_uptodate
 EOT
 diff $diffopt "$chkfile" "$outfile" || test_fail "test 10 failed"
 
-rm -rf "$todir"
-$RSYNC -ivvplrtH --link-dest="$lddir" "$fromdir/" "$todir/" \
+rm -rf "$to2dir"
+$RSYNC -ivvplrtH --link-dest="$todir" "$fromdir/" "$to2dir/" \
     | tee "$outfile"
 filter_outfile
 cat <<EOT >"$chkfile"
-.d..t... ./
-cd++++++ bar/
-cd++++++ bar/baz/
-hf       bar/baz/rsync
-cd++++++ foo/
-hf       foo/config1
-hf       foo/config2
-hf       foo/extra => foo/config1
-hL       foo/sym -> ../bar/baz/rsync
+cd$allspace ./
+cd$allspace bar/
+cd$allspace bar/baz/
+hf$allspace bar/baz/rsync
+cd$allspace foo/
+hf$allspace foo/config1
+hf$allspace foo/config2
+hf$allspace foo/extra => foo/config1
+$L$sym_dots foo/sym -> ../bar/baz/rsync
 EOT
 diff $diffopt "$chkfile" "$outfile" || test_fail "test 11 failed"
 
-rm -rf "$todir"
-$RSYNC -iplrtH --link-dest="$lddir" "$fromdir/" "$todir/" \
+rm -rf "$to2dir"
+$RSYNC -iplrtH --dry-run --link-dest=../to "$fromdir/" "$to2dir/" \
     | tee "$outfile"
-cat <<EOT >"$chkfile"
-.d..t... ./
-cd++++++ bar/
-cd++++++ bar/baz/
-cd++++++ foo/
+cat - "$chkfile.extra" <<EOT >"$chkfile"
 EOT
 diff $diffopt "$chkfile" "$outfile" || test_fail "test 12 failed"
 
-rm -rf "$todir"
-$RSYNC -vvplrtH --link-dest="$lddir" "$fromdir/" "$todir/" \
+rm -rf "$to2dir"
+$RSYNC -iplrtH --link-dest=../to "$fromdir/" "$to2dir/" \
+    | tee "$outfile"
+cat - "$chkfile.extra" <<EOT >"$chkfile"
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 13 failed"
+
+rm -rf "$to2dir"
+$RSYNC -vvplrtH --link-dest="$todir" "$fromdir/" "$to2dir/" \
     | tee "$outfile"
 filter_outfile
 cat <<EOT >"$chkfile"
-./
-bar/
-bar/baz/
+./ is uptodate
+bar/ is uptodate
+bar/baz/ is uptodate
 bar/baz/rsync is uptodate
-foo/
+foo/ is uptodate
 foo/config1 is uptodate
 foo/config2 is uptodate
-"foo/extra" is a hard link
-foo/sym is uptodate
+foo/extra is uptodate
+foo/sym $is_uptodate
 EOT
-diff $diffopt "$chkfile" "$outfile" || test_fail "test 13 failed"
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 14 failed"
 
-rm -rf "$todir"
-$RSYNC -ivvplrtH --compare-dest="$lddir" "$fromdir/" "$todir/" \
+rm -rf "$to2dir"
+$RSYNC -ivvplrtH --compare-dest="$todir" "$fromdir/" "$to2dir/" \
     | tee "$outfile"
 filter_outfile
-# TODO fix really-old problem when combining -H with --compare-dest:
-# missing output for foo/extra hard-link (and it might not be updated)!
 cat <<EOT >"$chkfile"
-.d..t... ./
-cd++++++ bar/
-cd++++++ bar/baz/
-.f       bar/baz/rsync
-cd++++++ foo/
-.f       foo/config1
-.f       foo/config2
-.L       foo/sym -> ../bar/baz/rsync
+cd$allspace ./
+cd$allspace bar/
+cd$allspace bar/baz/
+.f$allspace bar/baz/rsync
+cd$allspace foo/
+.f$allspace foo/config1
+.f$allspace foo/config2
+.f$allspace foo/extra
+$L_sym_dots foo/sym -> ../bar/baz/rsync
 EOT
-diff $diffopt "$chkfile" "$outfile" || test_fail "test 14 failed"
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 15 failed"
 
-rm -rf "$todir"
-$RSYNC -iplrtH --compare-dest="$lddir" "$fromdir/" "$todir/" \
+rm -rf "$to2dir"
+$RSYNC -iplrtH --compare-dest="$todir" "$fromdir/" "$to2dir/" \
     | tee "$outfile"
-cat <<EOT >"$chkfile"
-.d..t... ./
-cd++++++ bar/
-cd++++++ bar/baz/
-cd++++++ foo/
+cat - "$chkfile.extra" <<EOT >"$chkfile"
 EOT
-diff $diffopt "$chkfile" "$outfile" || test_fail "test 15 failed"
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 16 failed"
 
-rm -rf "$todir"
-$RSYNC -vvplrtH --compare-dest="$lddir" "$fromdir/" "$todir/" \
+rm -rf "$to2dir"
+$RSYNC -vvplrtH --compare-dest="$todir" "$fromdir/" "$to2dir/" \
     | tee "$outfile"
 filter_outfile
 cat <<EOT >"$chkfile"
-./
-bar/
-bar/baz/
+./ is uptodate
+bar/ is uptodate
+bar/baz/ is uptodate
 bar/baz/rsync is uptodate
-foo/
+foo/ is uptodate
 foo/config1 is uptodate
 foo/config2 is uptodate
-"foo/extra" is a hard link
-foo/sym is uptodate
+foo/extra is uptodate
+foo/sym $is_uptodate
 EOT
-diff $diffopt "$chkfile" "$outfile" || test_fail "test 16 failed"
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 17 failed"
 
 # The script would have aborted on error, so getting here means we've won.
 exit 0