X-Git-Url: https://mattmccutchen.net/rsync/rsync.git/blobdiff_plain/505ada146c9fbace57a92f1cd5567b38e78221d3..37f35d89d11d5ca8beadcb946dcd2e545d58b171:/rsync.yo diff --git a/rsync.yo b/rsync.yo index 92982926..6fe98a04 100644 --- a/rsync.yo +++ b/rsync.yo @@ -321,6 +321,7 @@ to the detailed description below for a complete description. verb( -D, --devices preserve devices (root only) -t, --times preserve times -O, --omit-dir-times omit directories when preserving times + --chmod=CHMOD change destination permissions -S, --sparse handle sparse files efficiently -n, --dry-run show what would have been transferred -W, --whole-file copy files whole (without rsync algorithm) @@ -328,8 +329,8 @@ to the detailed description below for a complete description. verb( -B, --block-size=SIZE force a fixed checksum block-size -e, --rsh=COMMAND specify the remote shell to use --rsync-path=PROGRAM specify the rsync to run on remote machine - --existing only update files that already exist --ignore-existing ignore files that already exist on receiver + --ignore-non-existing ignore files that don't exist on receiver --remove-sent-files sent files/symlinks are removed from sender --del an alias for --delete-during --delete delete files that don't exist on sender @@ -341,6 +342,7 @@ to the detailed description below for a complete description. verb( --force force deletion of dirs even if not empty --max-delete=NUM don't delete more than NUM files --max-size=SIZE don't transfer any file larger than SIZE + --min-size=SIZE don't transfer any file smaller than SIZE --partial keep partially transferred files --partial-dir=DIR put a partially transferred file into DIR --delay-updates put all updated files into place at end @@ -355,6 +357,7 @@ to the detailed description below for a complete description. verb( --copy-dest=DIR ... and include copies of unchanged files --link-dest=DIR hardlink to files in DIR when unchanged -z, --compress compress file data during the transfer + --compress-level=NUM explicitly set compression level -C, --cvs-exclude auto-ignore files in the same way CVS does -f, --filter=RULE add a file-filtering RULE -F same as --filter='dir-merge /.rsync-filter' @@ -369,6 +372,8 @@ to the detailed description below for a complete description. verb( --port=PORT specify double-colon alternate port number --blocking-io use blocking I/O for the remote shell --stats give some file-transfer stats + -h, --human-readable output numbers in a human-readable format + --si like human-readable, but use powers of 1000 --progress show progress during transfer -P same as --partial --progress -i, --itemize-changes output a change-summary for all updates @@ -384,7 +389,7 @@ to the detailed description below for a complete description. verb( -4, --ipv4 prefer IPv4 -6, --ipv6 prefer IPv6 --version print version number - -h, --help show this help screen) + --help show this help screen) Rsync can also be run as a daemon, in which case the following options are accepted: verb( @@ -397,7 +402,7 @@ accepted: verb( -v, --verbose increase verbosity -4, --ipv4 prefer IPv4 -6, --ipv6 prefer IPv6 - -h, --help show this help screen) + --help show this help screen) manpageoptions() @@ -408,8 +413,10 @@ The '=' for options that take a parameter is optional; whitespace can be used instead. startdit() -dit(bf(-h, --help)) Print a short help page describing the options -available in rsync. +dit(bf(--help)) Print a short help page describing the options +available in rsync and exit. For backward-compatibility with older +versions of rsync, the same help output can also be requested by using +the bf(-h) option without any other args. dit(bf(--version)) print the rsync version number and exit. @@ -695,6 +702,14 @@ it is preserving modification times (see bf(--times)). If NFS is sharing the directories on the receiving side, it is a good idea to use bf(-O). This option is inferred if you use bf(--backup) without bf(--backup-dir). +dit(bf(--chmod)) This options tells rsync to apply the listed "chmod" pattern +to the permission of the files on the destination. In addition to the normal +parsing rules specified in the chmod manpage, you can specify an item that +should only apply to a directory by prefixing it with a 'D', or specify an +item that should only apply to a file by prefixing it with a 'F'. For example: + +quote(--chmod=Dg+s,ug+w,Fo-w,+X) + dit(bf(-n, --dry-run)) This tells rsync to not do any file transfers, instead it will just report the actions it would have taken. @@ -710,12 +725,15 @@ dit(bf(-x, --one-file-system)) This tells rsync not to cross filesystem boundaries when recursing. This is useful for transferring the contents of only one filesystem. -dit(bf(--existing)) This tells rsync not to create any new files -- -only update files that already exist on the destination. +dit(bf(--ignore-existing)) This tells rsync to skip updating files that +already exist on the destination. See also bf(--ignore-non-existing). -dit(bf(--ignore-existing)) -This tells rsync not to update files that already exist on -the destination. +dit(bf(--ignore-non-existing)) This tells rsync to skip updating files that +do not exist yet on the destination. If this option is combined with the +bf(--ignore-existing) option, no files will be updated (which can be useful +if all you want to do is to delete missing files). Note that in older +versions of rsync, this option was named bf(--existing), so this older +name is still accepted as an alias. dit(bf(--remove-sent-files)) This tells rsync to remove from the sending side the files and/or symlinks that are newly created or whose content is @@ -799,9 +817,25 @@ This is useful when mirroring very large trees to prevent disasters. dit(bf(--max-size=SIZE)) This tells rsync to avoid transferring any file that is larger than the specified SIZE. The SIZE value can be -suffixed with a letter to indicate a size multiplier (K, M, or G) and +suffixed with a string to indicate a size multiplier, and may be a fractional value (e.g. "bf(--max-size=1.5m)"). +The suffixes are as follows: "K" (or "KiB") is a kibibyte (1024), +"M" (or "MiB") is a mebibyte (1024*1024), and "G" (or "GiB") is a +gibibyte (1024*1024*1024). +If you want the multiplier to be 1000 instead of 1024, use "KB", +"MB", or "GB". (Note: lower-case is also accepted for all values.) +Finally, if the suffix ends in either "+1" or "-1", the value will +be offset by one byte in the indicated direction. + +Examples: --max-size=1.5mb-1 is 1499999 bytes, and --max-size=2g+1 is +2147483649 bytes. + +dit(bf(--min-size=SIZE)) This tells rsync to avoid transferring any +file that is smaller than the specified SIZE, which can help in not +transferring small, junk files. +See the bf(--max-size) option for a description of SIZE. + dit(bf(-B, --block-size=BLOCKSIZE)) This forces the block size used in the rsync algorithm to a fixed value. It is normally selected based on the size of each file being updated. See the technical report for details. @@ -1064,6 +1098,10 @@ be achieved by using a compressing remote shell or a compressing transport because it takes advantage of the implicit information in the matching data blocks that are not explicitly sent over the connection. +dit(bf(--compress-level=NUM)) Explicitly set the compression level to use +(see bf(--compress)) instead of letting it default. If NUM is non-zero, +the bf(--compress) option is implied. + dit(bf(--numeric-ids)) With this option rsync will transfer numeric group and user IDs rather than using user and group names and mapping them at both ends. @@ -1175,7 +1213,7 @@ in a significant way (a transferred file, a recreated symlink/device, or a touched directory) unless the itemized-changes escape (%i) is included in the string, in which case the logging of names increases to mention any item that is changed in any way (as long as the receiving side is at least -2.6.4). See the bf(--itemized-changes) option for a description of the +2.6.4). See the bf(--itemize-changes) option for a description of the output of "%i". The bf(--verbose) option implies a format of "%n%L", but you can use @@ -1193,6 +1231,13 @@ dit(bf(--stats)) This tells rsync to print a verbose set of statistics on the file transfer, allowing you to tell how effective the rsync algorithm is for your data. +dit(bf(-h, --human-readable)) Output numbers in a more human-readable format. +Large numbers may be output in larger units, with a K (1024), M (1024*1024), +or G (1024*1024*1024) suffix. + +dit(bf(--si)) Similar to the bf(--human-readable) option, but using powers +of 1000 instead of 1024. + dit(bf(--partial)) By default, rsync will delete any partially transferred file if the transfer is interrupted. In some circumstances it is more desirable to keep partially transferred files. Using the @@ -1253,11 +1298,9 @@ updated file into a holding directory until the end of the transfer, at which time all the files are renamed into place in rapid succession. This attempts to make the updating of the files a little more atomic. By default the files are placed into a directory named ".~tmp~" in -each file's destination directory, but you can override this by specifying -the bf(--partial-dir) option. (Note that RSYNC_PARTIAL_DIR has no effect -on this value, nor is bf(--partial-dir) considered to be implied for the -purposes of the daemon-config's "refuse options" setting.) -Conflicts with bf(--inplace). +each file's destination directory, but if you've specified the +bf(--partial-dir) option, that directory will be used instead. +Conflicts with bf(--inplace) and bf(--append). This option uses more memory on the receiving side (one bit per file transferred) and also requires enough free disk space on the receiving @@ -1648,10 +1691,12 @@ itemize( The following modifiers are accepted after a "+" or "-": itemize( - it() A "/" specifies that the include/exclude should be treated as an - absolute path, relative to the root of the filesystem. For example, + it() A "/" specifies that the include/exclude rule should be matched + against the absolute pathname of the current item. For example, "-/ /etc/passwd" would exclude the passwd file any time the transfer - was sending files from the "/etc" directory. + was sending files from the "/etc" directory, and "-/ subdir/foo" + would always exclude "foo" when it is in a dir named "subdir", even + if "foo" is at the root of the current transfer. it() A "!" specifies that the include/exclude should take effect if the pattern fails to match. For instance, "-! */" would exclude all non-directories.