X-Git-Url: https://mattmccutchen.net/rsync/rsync.git/blobdiff_plain/48c1586cd115989812b2a5d98cdf8f750f2265e0..9439c0cb5a4b020b9bfcfe0351e33c17b9c53b54:/Makefile.in

diff --git a/Makefile.in b/Makefile.in
index cf1c57bf..969a5524 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -2,6 +2,7 @@
 # Makefile
 
 prefix=@prefix@
+datarootdir=@datarootdir@
 exec_prefix=@exec_prefix@
 bindir=@bindir@
 mandir=@mandir@
@@ -9,6 +10,8 @@ mandir=@mandir@
 LIBS=@LIBS@
 CC=@CC@
 CFLAGS=@CFLAGS@
+CPPFLAGS=@CPPFLAGS@
+EXEEXT=@EXEEXT@
 LDFLAGS=@LDFLAGS@
 
 INSTALLCMD=@INSTALL@
@@ -23,90 +26,93 @@ VERSION=@VERSION@
 .SUFFIXES:
 .SUFFIXES: .c .o
 
-LIBOBJ=lib/fnmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o \
-	lib/permstring.o \
-	@LIBOBJS@
-ZLIBOBJ=zlib/deflate.o zlib/infblock.o zlib/infcodes.o zlib/inffast.o \
-	zlib/inflate.o zlib/inftrees.o zlib/infutil.o zlib/trees.o \
-	zlib/zutil.o zlib/adler32.o 
-OBJS1=rsync.o generator.o receiver.o cleanup.o sender.o exclude.o util.o main.o checksum.o match.o syscall.o log.o backup.o
-OBJS2=options.o flist.o io.o compat.o hlink.o token.o uidlist.o socket.o fileio.o batch.o \
-	clientname.o
+HEADERS=byteorder.h config.h errcode.h proto.h rsync.h smb_acls.h lib/pool_alloc.h
+LIBOBJ=lib/wildmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o lib/md5.o \
+	lib/permstring.o lib/pool_alloc.o lib/sysacls.o lib/sysxattrs.o @LIBOBJS@
+ZLIBOBJ=zlib/deflate.o zlib/inffast.o zlib/inflate.o zlib/inftrees.o \
+	zlib/trees.o zlib/zutil.o zlib/adler32.o zlib/compress.o zlib/crc32.o
+OBJS1=flist.o rsync.o generator.o receiver.o cleanup.o sender.o exclude.o \
+	util.o main.o checksum.o match.o syscall.o log.o backup.o
+OBJS2=options.o io.o compat.o hlink.o token.o uidlist.o socket.o \
+	fileio.o batch.o clientname.o chmod.o acls.o xattrs.o
 OBJS3=progress.o pipe.o
 DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o
 popt_OBJS=popt/findme.o  popt/popt.o  popt/poptconfig.o \
 	popt/popthelp.o popt/poptparse.o
 OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(DAEMON_OBJ) $(LIBOBJ) $(ZLIBOBJ) @BUILD_POPT@
 
-TLS_OBJ = tls.o syscall.o lib/permstring.o 
+TLS_OBJ = tls.o syscall.o lib/compat.o lib/snprintf.o lib/permstring.o lib/sysxattrs.o
 
 # Programs we must have to run the test cases
-CHECK_PROGS = rsync tls getgroups trimslash t_unsafe
+CHECK_PROGS = rsync$(EXEEXT) tls$(EXEEXT) getgroups$(EXEEXT) getfsdev$(EXEEXT) \
+	trimslash$(EXEEXT) t_unsafe$(EXEEXT) wildtest$(EXEEXT)
+
+# Objects for CHECK_PROGS to clean
+CHECK_OBJS=getgroups.o getfsdev.o t_stub.o t_unsafe.o trimslash.o wildtest.o
 
 # note that the -I. is needed to handle config.h when using VPATH
 .c.o:
 @OBJ_SAVE@
-	$(CC) -I. -I$(srcdir) $(CFLAGS) -c $< @CC_SHOBJ_FLAG@
+	$(CC) -I. -I$(srcdir) $(CFLAGS) $(CPPFLAGS) -c $< @CC_SHOBJ_FLAG@
 @OBJ_RESTORE@
 
-all: rsync
-
-man: rsync.1 rsyncd.conf.5
+all: rsync$(EXEEXT)
 
 install: all
 	-mkdir -p ${DESTDIR}${bindir}
-	${INSTALLCMD} ${STRIP} -m 755 rsync ${DESTDIR}${bindir}
+	${INSTALLCMD} ${INSTALL_STRIP} -m 755 rsync$(EXEEXT) ${DESTDIR}${bindir}
 	-mkdir -p ${DESTDIR}${mandir}/man1
 	-mkdir -p ${DESTDIR}${mandir}/man5
 	${INSTALLMAN} -m 644 $(srcdir)/rsync.1 ${DESTDIR}${mandir}/man1
 	${INSTALLMAN} -m 644 $(srcdir)/rsyncd.conf.5 ${DESTDIR}${mandir}/man5
 
 install-strip:
-	$(MAKE) STRIP='-s' install
+	$(MAKE) INSTALL_STRIP='-s' install
+
+rsync$(EXEEXT): $(OBJS)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
 
-rsync: $(OBJS)
-	@echo "Please ignore warnings below about mktemp -- it is used in a safe way"
-	$(CC) $(CFLAGS) $(LDFLAGS) -o rsync $(OBJS) $(LIBS)
+$(OBJS): $(HEADERS)
 
-$(OBJS): config.h
+flist.o: rounding.h
 
-tls: $(TLS_OBJ)
+rounding.h: mkrounding$(EXEEXT)
+	./mkrounding$(EXEEXT) >rounding.h
+
+mkrounding$(EXEEXT): mkrounding.c rsync.h
+	@sed '1,/^struct file_struct/d; /^}/,$$d' <$(srcdir)/rsync.h >mkrounding.h
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ -I. $(srcdir)/mkrounding.c
+	@rm mkrounding.h
+
+tls$(EXEEXT): $(TLS_OBJ)
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TLS_OBJ) $(LIBS)
 
-getgroups: getgroups.o
+getgroups$(EXEEXT): getgroups.o
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)
 
-TRIMSLASH_OBJ = trimslash.o syscall.o
-trimslash: $(TRIMSLASH_OBJ)
+getfsdev$(EXEEXT): getfsdev.o
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getfsdev.o $(LIBS)
+
+TRIMSLASH_OBJ = trimslash.o syscall.o lib/compat.o lib/snprintf.o
+trimslash$(EXEEXT): $(TRIMSLASH_OBJ)
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)
 
-T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o t_stub.o lib/compat.o
-t_unsafe: $(T_UNSAFE_OBJ)
+T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o t_stub.o lib/compat.o lib/snprintf.o
+t_unsafe$(EXEEXT): $(T_UNSAFE_OBJ)
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)
 
-# I don't like these rules because CVS can skew the timestamps and
-# produce spurious warnings, and also make "make install" fail if the
-# source directory can no longer be found.  Since we don't rebuild
-# automatically they're kind of lame anyhow.
+gen:
+	cd $(srcdir) && $(MAKE) -f prepare-source.mak gen
 
-#Makefile: Makefile.in configure config.status
-#	echo "WARNING: You need to run ./config.status --recheck"
-
-# don't actually run autoconf, just issue a warning
-#configure: configure.in
-#	echo "WARNING: you need to rerun autoconf"
-
-$(srcdir)/rsync.1: $(srcdir)/rsync.yo
-	yodl2man -o $(srcdir)/rsync.1 $(srcdir)/rsync.yo
-
-$(srcdir)/rsyncd.conf.5: $(srcdir)/rsyncd.conf.yo
-	yodl2man -o $(srcdir)/rsyncd.conf.5 $(srcdir)/rsyncd.conf.yo
+man:
+	cd $(srcdir) && $(MAKE) -f prepare-source.mak man
 
 proto:
-	cat $(srcdir)/*.c $(srcdir)/lib/compat.c | awk -f $(srcdir)/mkproto.awk > $(srcdir)/proto.h
+	cd $(srcdir) && $(MAKE) -f prepare-source.mak proto.h
 
 clean: cleantests
-	rm -f *~ $(OBJS) rsync $(TLS_OBJ) $(CHECK_PROGS)
+	rm -f *~ $(OBJS) $(TLS_OBJ) $(CHECK_PROGS) $(CHECK_OBJS) \
+		mkrounding mkrounding.h rounding.h
 
 cleantests:
 	rm -rf ./testtmp*
@@ -115,8 +121,8 @@ cleantests:
 # directories, just in case somebody previously configured things in
 # the source directory.
 distclean: clean
-	rm -f Makefile config.h config.status 
-	rm -f $(srcdir)/Makefile $(srcdir)/config.h $(srcdir)/config.status 
+	rm -f Makefile config.h config.status
+	rm -f $(srcdir)/Makefile $(srcdir)/config.h $(srcdir)/config.status
 
 	rm -f config.cache config.log
 	rm -f $(srcdir)/config.cache $(srcdir)/config.log
@@ -129,7 +135,7 @@ distclean: clean
 finddead:
 	nm *.o */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
 	nm *.o */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
-	comm -13 nmused.txt nmfns.txt 
+	comm -13 nmused.txt nmfns.txt
 
 # 'check' is the GNU name, 'test' is the name for everybody else :-)
 .PHONY: check test
@@ -140,9 +146,6 @@ test: check
 # There seems to be no standard way to specify some variables as
 # exported from a Makefile apart from listing them like this.
 
-# TODO: Tests that depend on built test aide programs like tls need to
-# know where the build directory is.
-
 # This depends on building rsync; if we need any helper programs it
 # should depend on them too.
 
@@ -151,37 +154,44 @@ test: check
 # might lose in the future where POSIX diverges from old sh.
 
 check: all $(CHECK_PROGS)
-	POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin=`pwd`/rsync srcdir="$(srcdir)" $(srcdir)/runtests.sh
+	rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh
+
+check29: all $(CHECK_PROGS)
+	rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=29
+
+wildtest.o: wildtest.c lib/wildmatch.c rsync.h
+wildtest$(EXEEXT): wildtest.o lib/compat.o lib/snprintf.o
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@ $(LIBS)
 
 # This does *not* depend on building or installing: you can use it to
 # check a version installed from a binary or some other source tree,
 # if you want.
 
 installcheck: $(CHECK_PROGS)
-	POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync" srcdir="$(srcdir)" $(srcdir)/runtests.sh
+	POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync$(EXEEXT)" srcdir="$(srcdir)" $(srcdir)/runtests.sh
 
 # TODO: Add 'dist' target; need to know which files will be included
 
 # Run the SPLINT (Secure Programming Lint) tool.  <www.splint.org>
 .PHONY: splint
-splint: 
+splint:
 	splint +unixlib +gnuextensions -weak rsync.c
 
 
 rsync.dvi: doc/rsync.texinfo
 	texi2dvi -o $@ $<
 
-rsync.ps: rsync.dvi	
+rsync.ps: rsync.dvi
 	dvips -ta4 -o $@ $<
 
 rsync.pdf: doc/rsync.texinfo
 	texi2dvi -o $@ --pdf $<
 
 
-doxygen: 
+doxygen:
 	cd $(srcdir) && rm dox/html/* && doxygen
 
 # for maintainers only
-doxygen-upload: 
+doxygen-upload:
 	rsync -avzv $(srcdir)/dox/html/ --delete \
 	samba.org:/home/httpd/html/rsync/doxygen/head/