X-Git-Url: https://mattmccutchen.net/rsync/rsync.git/blobdiff_plain/0c819b76d684140eaafc5a3010ed914db6bc1e95..f2ae9e8583d289ed876c3666bd533dba13ffbfb8:/NEWS diff --git a/NEWS b/NEWS index 087bf190..31b1f96b 100644 --- a/NEWS +++ b/NEWS @@ -1,223 +1,201 @@ -NEWS for rsync 2.6.1 (UNRELEASED) -Protocol: 27 (unchanged) -Changes since 2.6.0: +NEWS for rsync 2.6.4 (UNRELEASED) +Protocol: 29 (changed) +Changes since 2.6.3: - ENHANCEMENTS: - - * Lower memory use and more optimal transfer of data over - the socket (see the INTERNAL section for details). + OUTPUT CHANGES: - * The RSYNC_PROXY environment variable can now contain a - "USER:PASS@" prefix before the "HOST:PORT" information. - (Bardur Arantsson) + - When rsync deletes a directory and outputs a verbose message about + it, it now appends a trailing slash to the name instead of (only + sometimes) outputting a preceding "directory " string. + - The --stats output will contain file-list time-statistics if both + sides are 2.6.4, or if the local side is 2.6.4 and the files are + being pushed (since the stats come from the sending side). + BUG FIXES: - * The --link-dest code now works properly for a non-root user - when the UIDs of the source and destination differ and -u was - specified, and when the group of the source can't be used on - the destination and -g was specified. (Wayne Davison) - - * Fixed a bug in the handling of -H (hard-links) that might - cause the expanded PATH/NAME value of the current item to - get overwritten (due to an expanded-name caching bug). - (Wayne Davison) - - * Keep per-file track of the sending of literal data with - --partial so that an interrupted transfer doesn't keep a - shorter temp file when no new data has been transfered over - the wire. (Wayne Davison) + - Restore the list-clearing behavior of "!" in a .cvsignore file (2.6.3 + was only treating it as a special token in an rsync include/exclude + file). - * Fixed a byte-order problem in --batch-mode on big-endian - machines. (Jay Fenlason) + - The --dry-run option (-n) now mentions changes in directories (w/-v). + It also now includes the normal uptodate output information for -vv. - * Fixed configure bug when running "./configure --disable-ipv6". - (Wayne Davison) + - Avoid a mkdir warning when removing a directory in the destination + that already exists in the --backup-dir. - * Fixed "make test" bug when build dir is not the source dir. + - An OS that has a binary mode for its files (such as cygwin0 needed + setmode(fd, O_BINARY) called on the temp-file we opened with + mkstemp(). (Fix derived from the cygwin's rsync package.) - * When using --cvs-exclude, the exclude items we get from a - directory's .cvsignore file once again only affect that one - directory (and not all following directories too). + - Fixed a potential hang when verbosity is high, the client side is + the sender, and the file-list is large. - * When specifying the USER@HOST: prefix for a file, the USER - part can now contain an '@', if needed (i.e. the last '@' - is used to find the HOST, not the first). - - INTERNAL: + - We now check if the OS doesn't support using mknod() for creating + FIFOs and sockets, and compile-in using mkfifo() and socket() when + necessary. - * Most of the I/O is now buffered, which results in a pretty - large speedup when running under MS Windows. (Craig Barratt) + - Fixed an off-by-one error in the handling of --max-delete=N. - * Optimizations to the name-handling/comparing code have made - some significant reductions in user-CPU time for large file - sets. (Wayne Davison) + - One place in the code wasn't checking if fork() failed. - * Some variable-type cleanup that makes the code more consistent. - (Wayne Davison) + - The "ignore nonreadable" daemon parameter no longer affects symlinks + that are being copied, even if they point nowhere. - * Reduced memory requirements of hard link preservation. - (J.W. Schultz) + - If the OS does not have lchown() and its chown() tries to set the + referent of a symlink (as it should), we no longer try to set the + user and group of a symlink. - * Implemented a new algorithm for hard-link handling that speeds - up the code significantly. (J.W. Schultz and Wayne Davison) + - The generator now properly runs the hard-link loop and the dir-time + rewriting loop after we're sure that the redo phase is complete. - * Got rid of support for protocol versions 17 and 18 (which are - both over 6 years old). (Wayne Davison) + - When --backup was specified with --partial-dir=DIR (where DIR is a + relative path), the backup code was erroneously trying to backup a + file that was put into the partial-dir. - * More optimal data transmission for --hard-links (protocol 28). + - One call to flush_write_file() was not being checked for an error. - * More optimal data transmission for --checksum (protocol 28). + - The --no-relative option was not being sent from the client to a + server sender. - * Less memory used for holding --checksum data. + - If an rsync daemon specified "dont compress = ..." for a file and the + client tried to specify --compress, the libz code was not handling a + compression level of 0 properly. This could cause a transfer failure + if the block-size for a file was large enough (i.e. rsync might have + exited with an error for large files). - * Less memory used per-file in the file list. - - * The 2 pipes used between the receiver and generator processes - (which are forked on the same machine) were reduced to 1 pipe and - the protocol improved so that (1) it is now impossible to have the - "redo" pipe fill up and hang rsync, and (2) trailing messages from - the receiver don't get lost on their way to through generator over - to the sender. (Wayne Davison) - - -NEWS for rsync 2.6.0 (1 Jan 2004) -Protocol: 27 (changed) -Changes since 2.5.7: + - If a daemon can't open the specified log file (i.e. syslog is not + being used), die without crashing. We also try to output an error + about the failure (which will only be seen if --no-detach was + specified). ENHANCEMENTS: - * "ssh" is now the default remote shell for rsync. If you want to - change this, configure like this: "./configure --with-rsh=rsh". - - * Added --files-from, --no-relative, --no-implied-dirs, and --from0. - Note that --from0 affects the line-ending character for all the - files read by the --*-from options. (Wayne Davison) - - * Length of csum2 is now per-file starting with protocol version - 27. (J.W. Schultz) - - * Per-file dynamic block size is now sqrt(file length). The - per-file checksum size is determined according to an algorithm - provided by Donovan Baarda which reduces the probability of rsync - algorithm corrupting data and falling back using the whole md4 - checksums. (J.W. Schultz, Donovan Baarda) - - * The --stats option no longer includes the (debug) malloc summary - unless the verbose option was specified at least twice. - - * Added a new error/warning code for when files vanish from the - sending side. Made vanished source files not interfere with the - file-deletion pass when --delete-after was specified. - - * Various trailing-info sections are now preceded by a newline. - - BUG FIXES: - - * Fixed several exclude/include matching bugs when using wild-cards. - This has a several user-visible effects, all of which make the - matching more consistent and intuitive. This should hopefully not - cause anyone problems since it makes the matching work more like - what people are expecting. (Wayne Davison) - - - A pattern with a "**" no longer causes a "*" to match slashes. - For example, with "/*/foo/**", "foo" must be 2 levels deep. - [If your string has BOTH "*" and "**" wildcards, changing the - "*" wildcards to "**" will provide the old behavior in all - versions.] - - - "**/foo" now matches at the base of the transfer (like /foo - does). [Use "/**/foo" to get the old behavior in all versions.] + - Rsync now supports popt's option aliases, which means that you can + use /etc/popt and/or ~/.popt to create your own option aliases. + + - Added the --delete-during (--del) option which will delete files + from on the receiving side incrementally as each directory in the + transfer is being processed (which makes it more efficient than the + default, before-the-transfer behavior of --delete). Note that the + --del option is implemented as an internally-defined popt alias, so + an rsync daemon that refuses "delete" (which, for safety's sake, + really matches "delete*") will still refuse all delete options. The + default --delete behavior is also explicitly selectable via + --delete-before. + + - All the --delete-WHEN options are now more memory efficient: + Previously an entire duplicate set of file-list objects was created + on the receiving side for the entire destination hierarchy. The new + algorithm only creates a single directory of objects at a time. + + - Added the --copy-dest option, which works like --link-dest except + that it includes copies of identical files. + + - Added support for specifying multiple --compare-dest, --copy-dest, or + --link-dest options, but only of a single type. (Promoted from the + patches dir and enhanced.) + + - Added the --max-size option. (Promoted from the patches dir.) + + - The daemon-mode options were separated from the normal rsync options + so that they can't be mixed together. This makes it impossible to + start a daemon that had improper default option values that could + cause problems (such as a hang or an abort) when a client connects. + + - The --bwlimit option may now be used in combination with --daemon + to specify both a default value for the daemon side and a value + that cannot be exceeded by a user-specified --bwlimit option. + + - Added the "port" parameter to the rsyncd.conf file. (Promoted from + the patches dir.) Also added "address". + + - In _exit_cleanup(): when we are exiting with a partially-received + file, we now flush any data in the write-cache before closing the + partial file. + + - The --inplace support was enhanced to work with --compare-dest, + --link-dest, and (the new) --copy-dest options. + + - Added the --dirs (-d) option for an easier way to copy directories + without recursion. + + - Added the --list-only option which is mainly a way for the client to + put the server into listing mode without needing to resort to any + option kluges (e.g. the age-old use of "-r --exclude="/*/*" for a + non-recursive listing). This option is used automatically when a + modern rsync speaks to a modern daemon, but may also be specified + manually if you want to force the use of the --list-only option over + a remote-shell connection. + + - Added the --omit-dir-times (-O) option which will avoid updating the + modified time for directories when --times was specified. This + option will avoid an extra pass through the file-list at the end of + the transfer (to tweak all the directory times), which can result in + an appreciable speedup for a really large transfer. + + - Added the --filter (-f) option and its helper option, -F. Filter + rules are an extension to the existing include/exclude handling + that also supports nested filter files as well as per-directory + filter files (like .cvsignore, but with full filter-rule parsing). + This new option was chosen in order to ensure that all existing + include/exclude processing remained 100% compatible with older + versions. + + - Added the --delay-updates option that puts all updated files into + a temporary directory (by default ".~tmp~", but settable via the + --partial-dir=DIR option) until the end of the transfer. This + makes the updates a little more atomic for a large transfer. + + - If rsync is put into the background, any output from --progress is + reduced. + + - Documented the "max verbosity" setting for rsyncd.conf. (This + setting was added a couple releases ago, but left undocumented.) + + SUPPORT FILES: + + - Added support/atomic-rsync -- a perl script that will transfer some + files using rsync, and then move the updated files into place all at + once at the end of the transfer. Only works when pulling, and uses + --link-dest and a parallel hierarchy of files to effect its update. + + - Added support/mnt-excl that takes the /proc/mounts file and + translates it into a set of excludes that will exclude all mount + points (even mapped mounts to the same disk). The excludes are made + relative to the specified source dir and properly anchored. + + - Added support/savetransfer.c -- a C program that can make a copy of + all the data that flows over the wire. This lets you test for data + corruption (by saving the data on both the sending side and the + receiving side) or provides a way to help debug a protocol error. + + - Added support/rrsync -- my version of Joe Smith's restricted rsync + perl script. This helps to ensure that only certain rsync commands + can be run by an ssh invocation. + + - Improved the option descriptions in the --help text. - - A non-anchored wildcard term floats to match beyond the base of - the transfer. E.g. "CVS/R*" matches at the end of the path, - just like the non-wildcard term "CVS/Root" does. [Use "/CVS/R*" - to get the old behavior in all versions.] - - - Including a "**" in the match term causes it to be matched - against the entire path, not just the name portion, even if - there aren't any interior slashes in the term. E.g. "foo**bar" - would exclude "/path/foo-bar" (just like before) as well as - "/foo-path/baz-bar" (unlike before). [Use "foo*bar" to get the - old behavior in all versions.] - - * The exclude list specified in the daemon's config file is now - properly applied to the pulled items no matter how deep the - user's file-args are in the source tree. (Wayne Davison) - - * For protocol version >= 27, mdfour_tail() is called when the - block size (including checksum_seed) is a multiple of 64. - Previously it was not called, giving the wrong MD4 checksum. - (Craig Barratt) - - * For protocol version >= 27, a 64 bit bit counter is used in - mdfour.c as required by the RFC. Previously only a 32 bit bit - counter was used, causing incorrect MD4 file checksums for - file sizes >= 512MB - 4. (Craig Barratt) - - * Fixed a crash bug when interacting with older rsync versions and - multiple files of the same name are destined for the same dir. - (Wayne Davison) - - * Keep tmp names from overflowing MAXPATHLEN. - - * Make --link-dest honor the absence of -p, -o, and -g. - - * Made rsync treat a trailing slash in the destination in a more - consistent manner. - - * Fixed file I/O error detection. (John Van Essen) - - * Fixed bogus "malformed address {hostname}" message in rsyncd log - when checking IP address against hostnames from "hosts allow" - and "hosts deny" parameters in config file. - - * Print heap statistics when verbose >= 2 instead of when >= 1. - - * Fixed a compression (-z) bug when syncing a mostly-matching file - that contains already-compressed data. (Yasuoka Masahiko and - Wayne Davison) - - * Fixed a bug in the --backup code that could cause deleted files - to not get backed up. - - * When the backup code makes new directories, create them with mode - 0700 instead of 0755 (since the directory permissions in the - backup tree are not yet copied from the main tree). - - * Call setgroups() in a more portable manner. - - * Improved file-related error messages to better indicate exactly - what pathname failed. (Wayne Davison) + INTERNAL: - * Fixed some bugs in the handling of --delete and --exclude when - using the --relative (-R) option. (Wayne Davison) + - Added better checking of the checksum-header values that come over + the socket. - * Fixed bug that prevented regular files from replacing - special files and caused a directory in --link-dest or - --compare-dest to block the creation of a file with the - same path. A directory still cannot be replaced by a - regular file unless --delete specified. (J.W. Schultz) + - Merged the various delete-file functions into a single function so + that it is easier to maintain. - * Detect and report when open or opendir succeed but read and - readdir fail caused by network filesystem issues and truncated - files. (David Norwood, Michael Brown, J.W. Schultz) + - Improved the type of some variables (particularly blocksize vars) for + consistency and proper size. - * Added a fix that should give ssh time to restore the tty settings - if the user presses Ctrl-C at an ssh password prompt. + - Got rid of the uint64 type (which we didn't need). - INTERNAL: + - Use a slightly more compatible set of core #include directives. - * Eliminated vestigial support for old versions that we stopped - supporting. (J.W. Schultz) + - Defined int32 in a way that ensures that the build dies if we can't + find a variable with at least 32 bits. - * Simplified some of the option-parsing code. (Wayne Davison) + BUILD CHANGES: - * Some cleanup made to the exclude code, as well as some new - defines added to enhance readability. (Wayne Davison) + - Handle an operating system that use mkdev() in place of makedev(). - * Changed the protocol-version code so that it can interact at a - lower protocol level than the maximum supported by both sides. - Added an undocumented option, --protocol=N, to force the value - we advertise to the other side (primarily for testing purposes). - (Wayne Davison) + - Improved configure to better handle cross-compiling.