X-Git-Url: https://mattmccutchen.net/rsync/rsync.git/blobdiff_plain/03a9ca0a976f6aca61af1a3b7630e7026d1444ad..2067ec73421b16633fcffa283e469022bef550b6:/NEWS diff --git a/NEWS b/NEWS index 751a6333..e8e1dff9 100644 --- a/NEWS +++ b/NEWS @@ -1,285 +1,127 @@ -NEWS for rsync 2.6.3 (UNRELEASED) -Protocol: 28 (unchanged) -Changes since 2.6.2: +NEWS for rsync 2.6.7 (UNRELEASED) +Protocol: 29 (unchanged) +Changes since 2.6.6: BUG FIXES: - - Fixed a crash bug that could cause --delete to crash when multiple - source directories were specified. + - Fixed a really old bug that caused --checksum (-c) to checksum all the + files encountered during the delete scan (ouch). - - The --backup code no longer attempts to create some directories - over and over again (generating warnings along the way). + - Made hard-links work with symlinks and devices again. - - Fixed a bug in the reading of the password file (by the daemon) - and the secrets file (by the client): the files no longer need to - be terminated by a newline for their content to be read in. + - If a device-file/special-file changes permissions, rsync now updates the + permissions without recreating the file. - - If a file has a read error on the sending side, the receiver will - no longer keep the resulting file unless the --partial option was - specified. + - If the user specifies a remote-host for both the source and destination, + we now output a syntax error rather than trying to open the destination + hostspec as a filename. - - Fixed an age-old crash problem with --read-batch on a local copy - (rsync was improperly assuming --whole-file for the local copy). + - When --inplace creates a new destination file, rsync now creates it with + permissions 0600 instead of 0000 -- this makes restarting possible when + the transfer gets interrupted in the middle of sending a new file. - ENHANCEMENTS: - - - Added long-option names for -4 and -6 (namely --ipv4 and --ipv6) - and documented them in the man page. - - INTERNAL: - - - Some cleanup in the exclude code has saved some memory and made - things easier to maintain. - - - Use rsyserr() in the various places that were still calling - rprintf() with strerror() as an arg. - - BUILD CHANGES: - - - Added a "gen" target to rebuild most of the various generated - files, including configure, config.h.in, the man pages, and - proto.h. - - - The timestamp of the proto.h file is unaltered by "make proto" - if the contents didn't change. - - DEVELOPER RELATED: - - - The scripts in the testsuite dir were cleaned up a bit. - -NEWS for rsync 2.6.2 (30 Apr 2004) -Protocol: 28 (unchanged) -Changes since 2.6.1: - - BUG FIXES: - - - Fixed a major bug in the sorting of the filenames when --relative - is used for some sources (just sources such as "/" and "/*" were - affected). This fix ensures that we ask for the right file-list - item when requesting changes from the sender. - - - Rsync now checks the return value of the close() function to - better report disk-full problems on an NFS file system. - - - Restored the old daemon-server behavior of logging error messages - rather than returning them to the user. (A better long-term fix - will be sought in the future.) + - Reject the combination of --inplace and --sparse since the sparse-output + algorithm doesn't work when overwriting existing data. - - An obscure uninitialized-variable bug was fixed in the uid/gid - code. (This bug probably had no ill effects.) + - Fixed the directory name in the error that is output when pop_dir() + fails. - BUILD CHANGES: + - Really fixed the parsing of a "!" entry in .cvsignore files this time. - - Got rid of the configure check for sys/sysctl.h (it wasn't used - and was causing a problem on some systems). Also improved the - broken-largefile-locking test to try to avoid failure due to an - NFS build-dir. + - If the generator gets a stat() error on a file, output it (this used to + require at least -vv for the error to be seen). - - Fixed a compile problem on systems that don't define - AI_NUMERICHOST. + - If waitpid() fails or the child rsync didn't exit cleanly, we now handle + the exit status properly and generate a better error. - - Fixed a compile problem in the popt source for compilers that - don't support __attribute__. - - DEVELOPER RELATED: - - - Improved the testsuite's "merge" test to work on OSF1. - - - Two new diffs were added to the patches dir. - - -NEWS for rsync 2.6.1 (26 Apr 2004) -Protocol: 28 (changed) -Changes since 2.6.0: - - SECURITY FIXES: - - - Paths sent to an rsync daemon are more thoroughly sanitized when - chroot is not used. If you're running a non-read-only rsync - daemon with chroot disabled, *please upgrade*, ESPECIALLY if the - user privs you run rsync under is anything above "nobody". + - Fixed some glitches in the double-verbose output when using --copy-dest, + --link-dest, or --compare-dest. ENHANCEMENTS: - - Lower memory use, more optimal transfer of data over the socket, - and lower CPU usage (see the INTERNAL section for details). + - Added the --append option that makes rsync append data onto files + that are longer on the source than the destination (this includes new + files). - - The RSYNC_PROXY environment variable can now contain a - "USER:PASS@" prefix before the "HOST:PORT" information. - (Bardur Arantsson) + - Added the --min-size=SIZE option to exclude small files from the + transfer. - - The --progress output now mentions how far along in the transfer - we are, including both a count of files transferred and a - percentage of the total file-count that we've processed. It also - shows better current-rate-of-transfer and remaining-transfer-time - values. + - Added the --compress-level option to allow you to set how aggressive + rsync's compression should be (this option implies --compress). - - Documentation changes now attempt to describe some often mis- - understood features more clearly. + - Enhanced the parsing of the SIZE value for --min-size and --max-size + to allow easy entry of multiples of 1000 (instead of just multiples + of 1024) and off-by-one values too (e.g. --max-size=8mb-1). - BUG FIXES: + - The options --human-readable (-h) and --si change the output of the + --stats and the end-of-run summary to be easier to read. - - When -x (--one-file-system) is combined with -L (--copy-links) or - --copy-unsafe-links, no symlinked files are skipped, even if the - referent file is on a different filesystem. - - - The --link-dest code now works properly for a non-root user when - (1) the UIDs of the source and destination differ and -o was - specified, or (2) when the group of the source can't be used on - the destination and -g was specified. - - - Fixed a bug in the handling of -H (hard-links) that might cause - the expanded PATH/NAME value of the current item to get - overwritten (due to an expanded-name caching bug). - - - We now reset the "new data has been sent" flag at the start of - each file we send. This makes sure that an interrupted transfer - with the --partial option set doesn't keep a shorter temp file - than the current basis file when no new data has been transfered - over the wire for that file. - - - Fixed a byte-order problem in --batch-mode on big-endian machines. - (Jay Fenlason) - - - When using --cvs-exclude, the exclude items we get from a - per-directory's .cvsignore file once again only affect that one - directory (not all following directories too). The items are also - now properly word-split and parsed without any +/- prefix parsing. - - - When specifying the USER@HOST: prefix for a file, the USER part - can now contain an '@', if needed (i.e. the last '@' is used to - find the HOST, not the first). - - - Fixed some bugs in the handling of group IDs for non-root users: - (1) It properly handles a group that the sender didn't have a name - for (it would previously skip changing the group on any files in - that group). (2) If --numeric-ids is used, rsync no longer - attempts to set groups that the user doesn't have the permission - to set. - - - Fixed the "refuse options" setting in the rsyncd.conf file. - - - Improved the -x (--one-file-system) flag's handling of any mount- - point directories we encounter. It is both more optimal (in that - it no longer does a useless scan of the contents of the mount- - point dirs) and also fixes a bug where a remapped mount of the - original filesystem could get discovered in a subdir we should be - ignoring. - - - Rsync no longer discards a double-slash at the start of a filename - when trying to open the file. It also no longer constructs names - that start with a double slash (unless the user supplied them). - - - Path-specifying options to a daemon should now work the same with - or without chroot turned on. Previously, such a option (such as - --link-dest) would get its absolute path munged into a relative - one if chroot was not on, making that setting fairly useless. - Rsync now transforms the path into one that is based on the - module's base dir when chroot is not enabled. - - - Fixed a compatibility problem interacting with older rsync - versions that might send us an empty --suffix value without - telling us that --backup-dir was specified. - - - The "hosts allow" option for a daemon-over-remote-shell process - now has improved support for IPv6 addresses and a fix for systems - that have a length field in their socket structs. - - - Fixed the ability to request an empty backup --suffix when sending - files to an rsync daemon. + - If lutimes() and/or lchmod() are around, use them to allow the + preservation of attributes on symlinks. - INTERNAL: + - The --link-dest option now affects symlinks and devices (when + possible). - - Most of the I/O is now buffered, which results in a pretty large - speedup when running under MS Windows. (Craig Barratt) + - Improved the output of hard-linked and copied files when using + --link-dest, --copy-dest, or --compare-dest. - - Optimizations to the name-handling/comparing code have made some - significant reductions in user-CPU time for large file sets. + - Added two config items to the rsyncd.conf parsing: "pre-xfer exec" + and "post-xfer exec". These allow a command to be specified on a + per-module basis that will be run before and/or after a daemon-mode + transfer. (See the manpage for a list of the environment variables + that are set with information about the transfer.) - - Some cleanup of the variable types make the code more consistent. + - When using the --relative option, you can now insert a dot dir in + the source path to indicate where the replication of the source dirs + should start. For example, if you specify a source path of + rsync://host/module/foo/bar/./baz/dir with -R, rsync will now only + replicate the "baz/dir" part of the source path (note: a trailing + dot dir is unaffected unless it also has a trailing slash). - - Reduced memory requirements of hard link preservation. - (J.W. Schultz) + - Added some new --no-FOO options that make it easier to override + unwanted implied or default options. For example, "-a --no-o" (aka + "--archive --no-owner") can be used to turn off the preservation of + file ownership that is implied by -a. - - Implemented a new algorithm for hard-link handling that speeds up - the code significantly. (J.W. Schultz and Wayne Davison) + - Added the --chmod=MODE option that allows the destination permissions + to be changed from the source permissions. E.g. --chmod=g+w,o-rwx - - The --hard-link option now uses the first existing file in the - group of linked files as the basis for the transfer. This - prevents the sub-optimal transfer of a file's data when a new - hardlink is added on the sending side and it sorts alphabetically - earlier in the list than the files that are already present on the - receiving side. + - Allow the --temp-dir option to be specified when starting a daemon, + which sets the default temporary directory for incoming files. - - Dropped support for protocol versions less than 20 (2.3.0 released - 15 Mar 1999) and activated warnings for protocols less than 25 - (2.5.0 released 23 Aug 2001). (Wayne Davison and J.W. Schultz, - severally) + - If --delete is combined with --dirs without --recursive, rsync will + now delete in any directory whose content is being synchronized. - - More optimal data transmission for --hard-links (protocol 28). + - If --backup is combined with --delete without --backup-dir (and + without --delete-excluded), we add a protect filter-rule to ensure + that files with the backup suffix are not deleted. - - More optimal data transmission for --checksum (protocol 28). + - The file-count stats that are output by --progress were improved to + better indicate what the numbers mean. For instance, the output: + "(xfer#5, to-check=8383/9999)" indicates that this was transferred + file #5, and we still need to check 8383 files out of 9999 total. - - Less memory is used when --checksum is specified. + - Some minor documentation improvements. - - Less memory is used in the file list (a per-file savings). + - Updated some diffs in the patches dir. - - The generator is now better about not modifying the file list - during the transfer in order to avoid a copy-on-write memory - bifurcation (on systems where fork() uses shared memory). - Previously, rsync's shared memory would slowly become unshared, - resulting in real memory usage nearly doubling on the receiving - side by the end of the transfer. Now, as long as permissions - are being preserved, the shared memory should remain that way - for the entire transfer. - - - Changed hardlink info and file_struct + strings to use allocation - pools. This reduces memory use for large file-sets and permits - freeing memory to the OS. (J.W. Schultz) - - - The 2 pipes used between the receiver and generator processes - (which are forked on the same machine) were reduced to 1 pipe and - the protocol improved so that (1) it is now impossible to have the - "redo" pipe fill up and hang rsync, and (2) trailing messages from - the receiver don't get lost on their way through the generator - over to the sender (which mainly affected hard-link messages and - verbose --stats output). - - - Improved the internal uid/gid code to be more portable and a - little more optimized. - - - The device numbers sent when using --devices are now sent as - separate major/minor values with 32-bit accuracy (protocol 28). - Previously, the copied devices were sent as a single 32-bit - number. This will make inter-operation of 64-bit binaries more - compatible with their 32-bit brethren (with both ends of the - connection are using protocol 28). Note that optimizations in the - binary protocol for sending the device numbers often results in - fewer bytes being used than before, even though more precision is - now available. - - - Some cleanup of the exclude/include structures and its code made - things clearer (internally), simpler, and more efficient. - - - The reading & writing of the file-list in batch-mode is now - handled by the same code that sends & receives the list over the - wire. This makes it much easier to maintain. (Note that the - batch code is still considered to be experimental.) + INTERNAL: - BUILD CHANGES: + - Some buffer sizes were expanded a bit, particularly on systems where + MAXPATHLEN is overly small (e.g. cygwin). - - The configure script now accepts --with-rsyncd-conf=PATH to - override the default value of the /etc/rsyncd.conf file. + - If io_printf() tries to format more data than fits in the buffer, exit + with an error instead of transmitting a truncated buffer. - - Fixed configure bug when running "./configure --disable-ipv6". + - If a va_copy macro is defined, lib/snprintf.c will use it when defining + the VA_COPY macro. - - Fixed compilation problem on Tru64 Unix (having to do with - sockaddr.sa_len and sockaddr.sin_len). + - Reduced the amount of stack memory needed for each level of directory + recursion by nearly MAXPATHLEN bytes. DEVELOPER RELATED: - - Fixed "make test" bug when build dir is not the source dir. - - - Added a couple extra diffs in the "patches" dir, removed the ones - that got applied, and rebuilt the rest. + - Several diffs in the patches dir now use the proper --enable-FOO + configure option instead of --with-FOO to turn on the inclusion of + the newly patched feature.