# Makefile
prefix=@prefix@
+datarootdir=@datarootdir@
exec_prefix=@exec_prefix@
bindir=@bindir@
mandir=@mandir@
.SUFFIXES:
.SUFFIXES: .c .o
-LIBOBJ=lib/fnmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o \
- lib/permstring.o @LIBOBJS@
-ZLIBOBJ=zlib/deflate.o zlib/infblock.o zlib/infcodes.o zlib/inffast.o \
- zlib/inflate.o zlib/inftrees.o zlib/infutil.o zlib/trees.o \
- zlib/zutil.o zlib/adler32.o
-OBJS1=rsync.o generator.o receiver.o cleanup.o sender.o exclude.o util.o \
- main.o checksum.o match.o syscall.o log.o backup.o
-OBJS2=options.o flist.o io.o compat.o hlink.o token.o uidlist.o socket.o \
- fileio.o batch.o clientname.o
+GENFILES=configure.sh config.h.in proto.h proto.h-tstamp rsync.1 rsyncd.conf.5
+HEADERS=byteorder.h config.h errcode.h proto.h rsync.h ifuncs.h lib/pool_alloc.h
+LIBOBJ=lib/wildmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o lib/md5.o \
+ lib/permstring.o lib/pool_alloc.o lib/sysacls.o lib/sysxattrs.o @LIBOBJS@
+ZLIBOBJ=zlib/deflate.o zlib/inffast.o zlib/inflate.o zlib/inftrees.o \
+ zlib/trees.o zlib/zutil.o zlib/adler32.o zlib/compress.o zlib/crc32.o
+OBJS1=flist.o rsync.o generator.o receiver.o cleanup.o sender.o exclude.o \
+ util.o main.o checksum.o match.o syscall.o log.o backup.o
+OBJS2=options.o io.o compat.o hlink.o token.o uidlist.o socket.o hashtable.o \
+ fileio.o batch.o clientname.o chmod.o acls.o xattrs.o
OBJS3=progress.o pipe.o
DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o
popt_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \
popt/popthelp.o popt/poptparse.o
OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(DAEMON_OBJ) $(LIBOBJ) $(ZLIBOBJ) @BUILD_POPT@
-TLS_OBJ = tls.o syscall.o lib/permstring.o
+TLS_OBJ = tls.o syscall.o lib/compat.o lib/snprintf.o lib/permstring.o lib/sysxattrs.o @BUILD_POPT@
# Programs we must have to run the test cases
-RSYNC_EXE=rsync$(EXEEXT)
-TLS_EXE=tls$(EXEEXT)
-GETGROUPS_EXE=getgroups$(EXEEXT)
-TRIMSLASH_EXE=trimslash$(EXEEXT)
-T_UNSAFE_EXE=t_unsafe$(EXEEXT)
-CHECK_PROGS=$(RSYNC_EXE) $(TLS_EXE) $(GETGROUPS_EXE) \
- $(TRIMSLASH_EXE) $(T_UNSAFE_EXE)
+CHECK_PROGS = rsync$(EXEEXT) tls$(EXEEXT) getgroups$(EXEEXT) getfsdev$(EXEEXT) \
+ trimslash$(EXEEXT) t_unsafe$(EXEEXT) wildtest$(EXEEXT)
+
+CHECK_SYMLINKS = testsuite/chown-fake.test testsuite/devices-fake.test
# Objects for CHECK_PROGS to clean
-CHECK_OBJS=getgroups.o t_stub.o t_unsafe.o trimslash.o
+CHECK_OBJS=tls.o getgroups.o getfsdev.o t_stub.o t_unsafe.o trimslash.o wildtest.o
# note that the -I. is needed to handle config.h when using VPATH
.c.o:
$(CC) -I. -I$(srcdir) $(CFLAGS) $(CPPFLAGS) -c $< @CC_SHOBJ_FLAG@
@OBJ_RESTORE@
-all: $(RSYNC_EXE)
-
-man: rsync.1 rsyncd.conf.5
+all: conf_stop make_stop rsync$(EXEEXT) @MAKE_MAN@
install: all
-mkdir -p ${DESTDIR}${bindir}
- ${INSTALLCMD} ${STRIP} -m 755 $(RSYNC_EXE) ${DESTDIR}${bindir}
+ ${INSTALLCMD} ${INSTALL_STRIP} -m 755 rsync$(EXEEXT) ${DESTDIR}${bindir}
-mkdir -p ${DESTDIR}${mandir}/man1
-mkdir -p ${DESTDIR}${mandir}/man5
- ${INSTALLMAN} -m 644 $(srcdir)/rsync.1 ${DESTDIR}${mandir}/man1
- ${INSTALLMAN} -m 644 $(srcdir)/rsyncd.conf.5 ${DESTDIR}${mandir}/man5
+ if test -f $(srcdir)/rsync.1; then ${INSTALLMAN} -m 644 $(srcdir)/rsync.1 ${DESTDIR}${mandir}/man1; fi
+ if test -f $(srcdir)/rsyncd.conf.5; then ${INSTALLMAN} -m 644 $(srcdir)/rsyncd.conf.5 ${DESTDIR}${mandir}/man5; fi
install-strip:
- $(MAKE) STRIP='-s' install
+ $(MAKE) INSTALL_STRIP='-s' install
-$(RSYNC_EXE): $(OBJS)
+rsync$(EXEEXT): $(OBJS)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
-$(OBJS): config.h
-
-$(TLS_EXE): $(TLS_OBJ)
+$(OBJS): $(HEADERS)
+$(CHECK_OBJS): $(HEADERS)
+
+flist.o: rounding.h
+
+rounding.h: rounding.c rsync.h
+ @for r in 0 1 3; do \
+ if $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) -o rounding -DEXTRA_ROUNDING=$$r -I. $(srcdir)/rounding.c >rounding.out 2>&1; then \
+ echo "#define EXTRA_ROUNDING $$r" >rounding.h; \
+ if test -f "$$HOME/build_farm/build_test.fns"; then \
+ echo "EXTRA_ROUNDING is $$r" >&2; \
+ fi; \
+ break; \
+ fi; \
+ done
+ @rm -f rounding
+ @if test -f rounding.h; then : ; else \
+ cat rounding.out 1>&2; \
+ echo "Failed to create rounding.h!" 1>&2; \
+ exit 1; \
+ fi
+ @rm -f rounding.out
+
+tls$(EXEEXT): $(TLS_OBJ)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TLS_OBJ) $(LIBS)
-$(GETGROUPS_EXE): getgroups.o
+getgroups$(EXEEXT): getgroups.o
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)
-TRIMSLASH_OBJ = trimslash.o syscall.o
-$(TRIMSLASH_EXE): $(TRIMSLASH_OBJ)
+getfsdev$(EXEEXT): getfsdev.o
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ getfsdev.o $(LIBS)
+
+TRIMSLASH_OBJ = trimslash.o syscall.o lib/compat.o lib/snprintf.o
+trimslash$(EXEEXT): $(TRIMSLASH_OBJ)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)
-T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o t_stub.o lib/compat.o lib/snprintf.o
-$(T_UNSAFE_EXE): $(T_UNSAFE_OBJ)
+T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o t_stub.o lib/compat.o lib/snprintf.o lib/wildmatch.o
+t_unsafe$(EXEEXT): $(T_UNSAFE_OBJ)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)
-# I don't like these rules because CVS can skew the timestamps and
-# produce spurious warnings, and also make "make install" fail if the
-# source directory can no longer be found. Since we don't rebuild
-# automatically they're kind of lame anyhow.
+gen: conf proto.h man
+
+gensend: gen
+ rsync -aivzc $(GENFILES) samba.org:/home/ftp/pub/rsync/generated-files/
+
+conf:
+ cd $(srcdir) && $(MAKE) -f prepare-source.mak conf
+
+conf_stop: configure.sh config.h.in
+
+configure.sh config.h.in: configure.in aclocal.m4
+ autoconf -o configure.sh
+ autoheader && touch config.h.in
+ @echo 'Configure files changed -- perhaps run:'
+ @echo ' make reconfigure'
+ @exit 1
+
+reconfigure: configure.sh
+ ./config.status --recheck
+ ./config.status
+
+make_stop: Makefile
-#Makefile: Makefile.in configure config.status
-# echo "WARNING: You need to run ./config.status --recheck"
+Makefile: Makefile.in config.status
+ @./config.status
+ @echo "Makefile updated -- rerun your make command."
+ @exit 1
-# don't actually run autoconf, just issue a warning
-#configure: configure.in
-# echo "WARNING: you need to rerun autoconf"
+proto: proto.h-tstamp
-$(srcdir)/rsync.1: $(srcdir)/rsync.yo
- yodl2man -o $(srcdir)/rsync.1 $(srcdir)/rsync.yo
+proto.h: proto.h-tstamp
+ @if test -f proto.h; then :; else cp -p $(srcdir)/proto.h .; fi
-$(srcdir)/rsyncd.conf.5: $(srcdir)/rsyncd.conf.yo
- yodl2man -o $(srcdir)/rsyncd.conf.5 $(srcdir)/rsyncd.conf.yo
+proto.h-tstamp: $(srcdir)/*.c $(srcdir)/lib/compat.c
+ perl $(srcdir)/mkproto.pl $(srcdir)/*.c $(srcdir)/lib/compat.c
-proto:
- cat $(srcdir)/*.c $(srcdir)/lib/compat.c | awk -f $(srcdir)/mkproto.awk > $(srcdir)/proto.h
+man: rsync.1 rsyncd.conf.5
+
+rsync.1: rsync.yo
+ yodl2man -o rsync.1 $(srcdir)/rsync.yo
+ -$(srcdir)/tweak_manpage rsync.1
+
+rsyncd.conf.5: rsyncd.conf.yo
+ yodl2man -o rsyncd.conf.5 $(srcdir)/rsyncd.conf.yo
+ -$(srcdir)/tweak_manpage rsyncd.conf.5
clean: cleantests
- rm -f *~ $(OBJS) $(TLS_OBJ) $(CHECK_PROGS) $(CHECK_OBJS)
+ rm -f *~ $(OBJS) $(CHECK_PROGS) $(CHECK_OBJS) $(CHECK_SYMLINKS) \
+ rounding rounding.h
cleantests:
rm -rf ./testtmp*
# the source directory.
distclean: clean
rm -f Makefile config.h config.status
+ rm -f lib/dummy popt/dummy zlib/dummy
rm -f $(srcdir)/Makefile $(srcdir)/config.h $(srcdir)/config.status
-
+ rm -f $(srcdir)/lib/dummy $(srcdir)/popt/dummy $(srcdir)/zlib/dummy
rm -f config.cache config.log
rm -f $(srcdir)/config.cache $(srcdir)/config.log
-
rm -f shconfig $(srcdir)/shconfig
+ rm -f $(GENFILES)
+ rm -rf autom4te.cache
# this target is really just for my use. It only works on a limited
# range of machines and is used to produce a list of potentially
test: check
-
# There seems to be no standard way to specify some variables as
# exported from a Makefile apart from listing them like this.
-# TODO: Tests that depend on built test aide programs like tls need to
-# know where the build directory is.
-
# This depends on building rsync; if we need any helper programs it
# should depend on them too.
# catch Bash-isms earlier even if we're running on GNU. Of course, we
# might lose in the future where POSIX diverges from old sh.
-check: all $(CHECK_PROGS)
- POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin=`pwd`/$(RSYNC_EXE) srcdir="$(srcdir)" $(srcdir)/runtests.sh
+check: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
+ rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh
+
+check29: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
+ rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=29
+
+wildtest.o: wildtest.c lib/wildmatch.c rsync.h config.h
+wildtest$(EXEEXT): wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@ $(LIBS)
+
+testsuite/chown-fake.test:
+ ln -s chown.test $(srcdir)/testsuite/chown-fake.test
+
+testsuite/devices-fake.test:
+ ln -s devices.test $(srcdir)/testsuite/devices-fake.test
# This does *not* depend on building or installing: you can use it to
# check a version installed from a binary or some other source tree,
# if you want.
-installcheck: $(CHECK_PROGS)
- POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/$(RSYNC_EXE)" srcdir="$(srcdir)" $(srcdir)/runtests.sh
+installcheck: $(CHECK_PROGS) $(CHECK_SYMLINKS)
+ POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync$(EXEEXT)" srcdir="$(srcdir)" $(srcdir)/runtests.sh
# TODO: Add 'dist' target; need to know which files will be included
Matt McCutchen's Web Site / rsync / rsync.git / blobdiff