-/*
- Copyright (C) Andrew Tridgell 1996
- Copyright (C) Paul Mackerras 1996
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+/* -*- c-file-style: "linux" -*-
+ *
+ * Copyright (C) 1996-2001 by Andrew Tridgell
+ * Copyright (C) Paul Mackerras 1996
+ * Copyright (C) 2001, 2002 by Martin Pool <mbp@samba.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/**
+ * @file io.c
+ *
+ * Socket and pipe IO utilities used in rsync.
+ *
+ * rsync provides its own multiplexing system, which is used to send
+ * stderr and stdout over a single socket. We need this because
+ * stdout normally carries the binary data stream, and stderr all our
+ * error messages.
+ *
+ * For historical reasons this is off during the start of the
+ * connection, but it's switched on quite early using
+ * io_start_multiplex_out() and io_start_multiplex_in().
+ **/
-/*
- Utilities used in rsync
-
- tridge, June 1996
- */
#include "rsync.h"
-static int64 total_written;
-static int64 total_read;
+/** If no timeout is specified then use a 60 second select timeout */
+#define SELECT_TIMEOUT 60
+
+static int io_multiplexing_out;
+static int io_multiplexing_in;
+static int multiplex_in_fd;
+static int multiplex_out_fd;
+static time_t last_io;
+static int no_flush;
+extern int bwlimit;
extern int verbose;
-extern int sparse_files;
extern int io_timeout;
+extern struct stats stats;
+
+
+const char phase_unknown[] = "unknown";
+
+/**
+ * The connection might be dropped at some point; perhaps because the
+ * remote instance crashed. Just giving the offset on the stream is
+ * not very helpful. So instead we try to make io_phase_name point to
+ * something useful.
+ *
+ * For buffered/multiplexed IO these names will be somewhat
+ * approximate; perhaps for ease of support we would rather make the
+ * buffer always flush when a single application-level IO finishes.
+ *
+ * @todo Perhaps we want some simple stack functionality, but there's
+ * no need to overdo it.
+ **/
+const char *io_write_phase = phase_unknown;
+const char *io_read_phase = phase_unknown;
+
+/** Ignore EOF errors while reading a module listing if the remote
+ version is 24 or less. */
+int kludge_around_eof = False;
+
+
+static int io_error_fd = -1;
+static int io_filesfrom_f_in = -1;
+static int io_filesfrom_f_out = -1;
+static char io_filesfrom_buf[2048];
+static char *io_filesfrom_bp;
+static char io_filesfrom_lastchar;
+static int io_filesfrom_buflen;
+
+static void read_loop(int fd, char *buf, size_t len);
-int64 write_total(void)
+static void check_timeout(void)
{
- return total_written;
+ extern int am_server, am_daemon;
+ time_t t;
+
+ err_list_push();
+
+ if (!io_timeout) return;
+
+ if (!last_io) {
+ last_io = time(NULL);
+ return;
+ }
+
+ t = time(NULL);
+
+ if (last_io && io_timeout && (t-last_io) >= io_timeout) {
+ if (!am_server && !am_daemon) {
+ rprintf(FERROR,"io timeout after %d seconds - exiting\n",
+ (int)(t-last_io));
+ }
+ exit_cleanup(RERR_TIMEOUT);
+ }
}
-int64 read_total(void)
+/** Setup the fd used to propagate errors */
+void io_set_error_fd(int fd)
{
- return total_read;
+ io_error_fd = fd;
}
-static int buffer_f_in = -1;
+/** Read some data from the error fd and write it to the write log code */
+static void read_error_fd(void)
+{
+ char buf[200];
+ size_t n;
+ int fd = io_error_fd;
+ int tag, len;
+
+ /* io_error_fd is temporarily disabled -- is this meant to
+ * prevent indefinite recursion? */
+ io_error_fd = -1;
-void setup_nonblocking(int f_in,int f_out)
+ read_loop(fd, buf, 4);
+ tag = IVAL(buf, 0);
+
+ len = tag & 0xFFFFFF;
+ tag = tag >> 24;
+ tag -= MPLEX_BASE;
+
+ while (len) {
+ n = len;
+ if (n > (sizeof buf - 1))
+ n = sizeof buf - 1;
+ read_loop(fd, buf, n);
+ rwrite((enum logcode)tag, buf, n);
+ len -= n;
+ }
+
+ io_error_fd = fd;
+}
+
+/**
+ * When we're the receiver and we have a local --files-from list of names
+ * that needs to be sent over the socket to the sender, we have to do two
+ * things at the same time: send the sender a list of what files we're
+ * processing and read the incoming file+info list from the sender. We do
+ * this by augmenting the read_timeout() function to copy this data. It
+ * uses the io_filesfrom_buf to read a block of data from f_in (when it is
+ * ready, since it might be a pipe) and then blast it out f_out (when it
+ * is ready to receive more data).
+ */
+void io_set_filesfrom_fds(int f_in, int f_out)
{
- set_blocking(f_out,0);
- buffer_f_in = f_in;
+ io_filesfrom_f_in = f_in;
+ io_filesfrom_f_out = f_out;
+ io_filesfrom_bp = io_filesfrom_buf;
+ io_filesfrom_lastchar = '\0';
+ io_filesfrom_buflen = 0;
}
+/**
+ * It's almost always an error to get an EOF when we're trying to read
+ * from the network, because the protocol is self-terminating.
+ *
+ * However, there is one unfortunate cases where it is not, which is
+ * rsync <2.4.6 sending a list of modules on a server, since the list
+ * is terminated by closing the socket. So, for the section of the
+ * program where that is a problem (start_socket_client),
+ * kludge_around_eof is True and we just exit.
+ */
+static void whine_about_eof(void)
+{
+ if (kludge_around_eof)
+ exit_cleanup(0);
+ else {
+ rprintf(FERROR,
+ "%s: connection unexpectedly closed "
+ "(%.0f bytes read so far)\n",
+ RSYNC_NAME, (double)stats.total_read);
+
+ exit_cleanup(RERR_STREAMIO);
+ }
+}
-static char *read_buffer;
-static char *read_buffer_p;
-static int read_buffer_len;
-static int read_buffer_size;
+static void die_from_readerr(int err)
+{
+ /* this prevents us trying to write errors on a dead socket */
+ io_multiplexing_close();
+
+ rprintf(FERROR, "%s: read error: %s\n",
+ RSYNC_NAME, strerror(err));
+ exit_cleanup(RERR_STREAMIO);
+}
-/* This function was added to overcome a deadlock problem when using
- * ssh. It looks like we can't allow our receive queue to get full or
- * ssh will clag up. Uggh. */
-static void read_check(int f)
+
+/**
+ * Read from a socket with IO timeout. return the number of bytes
+ * read. If no bytes can be read then exit, never return a number <= 0.
+ *
+ * TODO: If the remote shell connection fails, then current versions
+ * actually report an "unexpected EOF" error here. Since it's a
+ * fairly common mistake to try to use rsh when ssh is required, we
+ * should trap that: if we fail to read any data at all, we should
+ * give a better explanation. We can tell whether the connection has
+ * started by looking e.g. at whether the remote version is known yet.
+ */
+static int read_timeout(int fd, char *buf, size_t len)
{
- int n;
+ int n, ret=0;
+
+ io_flush();
+
+ while (ret == 0) {
+ /* until we manage to read *something* */
+ fd_set r_fds, w_fds;
+ struct timeval tv;
+ int fd_count = fd+1;
+ int count;
+
+ FD_ZERO(&r_fds);
+ FD_SET(fd, &r_fds);
+ if (io_error_fd != -1) {
+ FD_SET(io_error_fd, &r_fds);
+ if (io_error_fd >= fd_count) fd_count = io_error_fd+1;
+ }
+ if (io_filesfrom_f_out != -1) {
+ int new_fd;
+ if (io_filesfrom_buflen == 0) {
+ if (io_filesfrom_f_in != -1) {
+ FD_SET(io_filesfrom_f_in, &r_fds);
+ new_fd = io_filesfrom_f_in;
+ } else {
+ io_filesfrom_f_out = -1;
+ new_fd = -1;
+ }
+ } else {
+ FD_ZERO(&w_fds);
+ FD_SET(io_filesfrom_f_out, &w_fds);
+ new_fd = io_filesfrom_f_out;
+ }
+ if (new_fd >= fd_count) fd_count = new_fd+1;
+ }
- if (f == -1) return;
+ tv.tv_sec = io_timeout?io_timeout:SELECT_TIMEOUT;
+ tv.tv_usec = 0;
- if (read_buffer_len == 0) {
- read_buffer_p = read_buffer;
- }
+ errno = 0;
- if ((n=num_waiting(f)) <= 0)
- return;
+ count = select(fd_count, &r_fds,
+ io_filesfrom_buflen? &w_fds : NULL,
+ NULL, &tv);
- /* things could deteriorate if we read in really small chunks */
- if (n < 10) n = 1024;
+ if (count == 0) {
+ check_timeout();
+ }
- if (read_buffer_p != read_buffer) {
- memmove(read_buffer,read_buffer_p,read_buffer_len);
- read_buffer_p = read_buffer;
- }
+ if (count <= 0) {
+ if (errno == EBADF) {
+ exit_cleanup(RERR_SOCKETIO);
+ }
+ continue;
+ }
- if (n > (read_buffer_size - read_buffer_len)) {
- read_buffer_size += n;
- if (!read_buffer)
- read_buffer = (char *)malloc(read_buffer_size);
- else
- read_buffer = (char *)realloc(read_buffer,read_buffer_size);
- if (!read_buffer) out_of_memory("read check");
- read_buffer_p = read_buffer;
- }
- n = read(f,read_buffer+read_buffer_len,n);
- if (n > 0) {
- read_buffer_len += n;
- }
-}
+ if (io_error_fd != -1 && FD_ISSET(io_error_fd, &r_fds)) {
+ read_error_fd();
+ }
-static time_t last_io;
+ if (io_filesfrom_f_out != -1) {
+ if (io_filesfrom_buflen) {
+ if (FD_ISSET(io_filesfrom_f_out, &w_fds)) {
+ int l = write(io_filesfrom_f_out,
+ io_filesfrom_bp,
+ io_filesfrom_buflen);
+ if (l > 0) {
+ if (!(io_filesfrom_buflen -= l))
+ io_filesfrom_bp = io_filesfrom_buf;
+ else
+ io_filesfrom_bp += l;
+ } else {
+ /* XXX should we complain? */
+ io_filesfrom_f_out = -1;
+ }
+ }
+ } else if (io_filesfrom_f_in != -1) {
+ if (FD_ISSET(io_filesfrom_f_in, &r_fds)) {
+ int l = read(io_filesfrom_f_in,
+ io_filesfrom_buf,
+ sizeof io_filesfrom_buf);
+ if (l <= 0) {
+ /* Send end-of-file marker */
+ io_filesfrom_buf[0] = '\0';
+ io_filesfrom_buf[1] = '\0';
+ io_filesfrom_buflen = io_filesfrom_lastchar? 2 : 1;
+ io_filesfrom_f_in = -1;
+ } else {
+ extern int eol_nulls;
+ if (!eol_nulls) {
+ char *s = io_filesfrom_buf + l;
+ /* Transform CR and/or LF into '\0' */
+ while (s-- > io_filesfrom_buf) {
+ if (*s == '\n' || *s == '\r')
+ *s = '\0';
+ }
+ }
+ if (!io_filesfrom_lastchar) {
+ /* Last buf ended with a '\0', so don't
+ * let this buf start with one. */
+ while (l && !*io_filesfrom_bp)
+ io_filesfrom_bp++, l--;
+ }
+ if (!l)
+ io_filesfrom_bp = io_filesfrom_buf;
+ else {
+ char *f = io_filesfrom_bp;
+ char *t = f;
+ char *eob = f + l;
+ /* Eliminate any multi-'\0' runs. */
+ while (f != eob) {
+ if (!(*t++ = *f++)) {
+ while (f != eob && !*f)
+ f++, l--;
+ }
+ }
+ io_filesfrom_lastchar = f[-1];
+ }
+ io_filesfrom_buflen = l;
+ }
+ }
+ }
+ }
+ if (!FD_ISSET(fd, &r_fds)) continue;
-static void check_timeout(void)
-{
- time_t t;
-
- if (!io_timeout) return;
+ n = read(fd, buf, len);
- if (!last_io) {
- last_io = time(NULL);
- return;
+ if (n > 0) {
+ buf += n;
+ len -= n;
+ ret += n;
+ if (io_timeout)
+ last_io = time(NULL);
+ continue;
+ } else if (n == 0) {
+ whine_about_eof();
+ return -1; /* doesn't return */
+ } else if (n == -1) {
+ if (errno == EINTR || errno == EWOULDBLOCK ||
+ errno == EAGAIN)
+ continue;
+ die_from_readerr(errno);
+ }
}
- t = time(NULL);
+ return ret;
+}
- if (last_io && io_timeout && (t-last_io)>io_timeout) {
- rprintf(FERROR,"read timeout after %d second - exiting\n",
- (int)(t-last_io));
- exit_cleanup(1);
+/**
+ * Read a line into the "fname" buffer (which must be at least MAXPATHLEN
+ * characters long).
+ */
+int read_filesfrom_line(int fd, char *fname)
+{
+ char ch, *s, *eob = fname + MAXPATHLEN - 1;
+ int cnt;
+ extern int io_timeout;
+ extern int eol_nulls;
+ extern char *remote_filesfrom_file;
+ extern int am_server;
+ int reading_remotely = remote_filesfrom_file || (am_server && fd == 0);
+ int nulls = eol_nulls || reading_remotely;
+
+ start:
+ s = fname;
+ while (1) {
+ cnt = read(fd, &ch, 1);
+ if (cnt < 0 && (errno == EWOULDBLOCK
+ || errno == EINTR || errno == EAGAIN)) {
+ struct timeval tv;
+ fd_set fds;
+ FD_ZERO(&fds);
+ FD_SET(fd, &fds);
+ tv.tv_sec = io_timeout? io_timeout : SELECT_TIMEOUT;
+ tv.tv_usec = 0;
+ if (!select(fd+1, &fds, NULL, NULL, &tv))
+ check_timeout();
+ continue;
+ }
+ if (cnt != 1)
+ break;
+ if (nulls? !ch : (ch == '\r' || ch == '\n')) {
+ /* Skip empty lines if reading locally. */
+ if (!reading_remotely && s == fname)
+ continue;
+ break;
+ }
+ if (s < eob)
+ *s++ = ch;
}
+ *s = '\0';
+
+ /* Dump comments. */
+ if (*fname == '#' || *fname == ';')
+ goto start;
+
+ return s - fname;
}
-static int readfd(int fd,char *buffer,int N)
+
+/**
+ * Continue trying to read len bytes - don't return until len has been
+ * read.
+ **/
+static void read_loop(int fd, char *buf, size_t len)
{
- int ret;
- int total=0;
- struct timeval tv;
-
- if (read_buffer_len < N)
- read_check(buffer_f_in);
-
- while (total < N) {
- if (read_buffer_len > 0 && buffer_f_in == fd) {
- ret = MIN(read_buffer_len,N-total);
- memcpy(buffer+total,read_buffer_p,ret);
- read_buffer_p += ret;
- read_buffer_len -= ret;
- total += ret;
+ while (len) {
+ int n = read_timeout(fd, buf, len);
+
+ buf += n;
+ len -= n;
+ }
+}
+
+
+/**
+ * Read from the file descriptor handling multiplexing - return number
+ * of bytes read.
+ *
+ * Never returns <= 0.
+ */
+static int read_unbuffered(int fd, char *buf, size_t len)
+{
+ static size_t remaining;
+ int tag, ret = 0;
+ char line[1024];
+
+ if (!io_multiplexing_in || fd != multiplex_in_fd)
+ return read_timeout(fd, buf, len);
+
+ while (ret == 0) {
+ if (remaining) {
+ len = MIN(len, remaining);
+ read_loop(fd, buf, len);
+ remaining -= len;
+ ret = len;
continue;
- }
+ }
- while ((ret = read(fd,buffer + total,N-total)) == -1) {
- fd_set fds;
+ read_loop(fd, line, 4);
+ tag = IVAL(line, 0);
- if (errno != EAGAIN && errno != EWOULDBLOCK)
- return -1;
- FD_ZERO(&fds);
- FD_SET(fd, &fds);
- tv.tv_sec = io_timeout;
- tv.tv_usec = 0;
+ remaining = tag & 0xFFFFFF;
+ tag = tag >> 24;
- if (select(fd+1, &fds, NULL, NULL,
- io_timeout?&tv:NULL) != 1) {
- check_timeout();
- }
+ if (tag == MPLEX_BASE)
+ continue;
+
+ tag -= MPLEX_BASE;
+
+ if (tag != FERROR && tag != FINFO) {
+ rprintf(FERROR, "unexpected tag %d\n", tag);
+ exit_cleanup(RERR_STREAMIO);
}
- if (ret <= 0)
- return total;
+ if (remaining > sizeof line - 1) {
+ rprintf(FERROR, "multiplexing overflow %ld\n\n",
+ (long)remaining);
+ exit_cleanup(RERR_STREAMIO);
+ }
+
+ read_loop(fd, line, remaining);
+ line[remaining] = 0;
+
+ rprintf((enum logcode) tag, "%s", line);
+ remaining = 0;
+ }
+
+ return ret;
+}
+
+
+
+/**
+ * Do a buffered read from @p fd. Don't return until all @p n bytes
+ * have been read. If all @p n can't be read then exit with an
+ * error.
+ **/
+static void readfd(int fd, char *buffer, size_t N)
+{
+ int ret;
+ size_t total=0;
+
+ while (total < N) {
+ io_flush();
+
+ ret = read_unbuffered(fd, buffer + total, N-total);
total += ret;
}
- if (io_timeout)
- last_io = time(NULL);
- return total;
+ stats.total_read += total;
}
int32 read_int(int f)
{
- int ret;
- char b[4];
- if ((ret=readfd(f,b,4)) != 4) {
- if (verbose > 1)
- rprintf(FERROR,"(%d) Error reading %d bytes : %s\n",
- getpid(),4,ret==-1?strerror(errno):"EOF");
- exit_cleanup(1);
- }
- total_read += 4;
- return IVAL(b,0);
+ char b[4];
+ int32 ret;
+
+ readfd(f,b,4);
+ ret = IVAL(b,0);
+ if (ret == (int32)0xffffffff) return -1;
+ return ret;
}
int64 read_longint(int f)
{
- extern int remote_version;
int64 ret;
char b[8];
ret = read_int(f);
- if ((int32)ret != (int32)0xffffffff) return ret;
+ if ((int32)ret != (int32)0xffffffff) {
+ return ret;
+ }
#ifdef NO_INT64
rprintf(FERROR,"Integer overflow - attempted 64 bit offset\n");
- exit_cleanup(1);
+ exit_cleanup(RERR_UNSUPPORTED);
#else
- if (remote_version >= 16) {
- if ((ret=readfd(f,b,8)) != 8) {
- if (verbose > 1)
- rprintf(FERROR,"(%d) Error reading %d bytes : %s\n",
- getpid(),8,ret==-1?strerror(errno):"EOF");
- exit_cleanup(1);
- }
- total_read += 8;
- ret = IVAL(b,0) | (((int64)IVAL(b,4))<<32);
- }
+ readfd(f,b,8);
+ ret = IVAL(b,0) | (((int64)IVAL(b,4))<<32);
#endif
return ret;
}
-void read_buf(int f,char *buf,int len)
+void read_buf(int f,char *buf,size_t len)
{
- int ret;
- if ((ret=readfd(f,buf,len)) != len) {
- if (verbose > 1)
- rprintf(FERROR,"(%d) Error reading %d bytes : %s\n",
- getpid(),len,ret==-1?strerror(errno):"EOF");
- exit_cleanup(1);
- }
- total_read += len;
+ readfd(f,buf,len);
}
-void read_sbuf(int f,char *buf,int len)
+void read_sbuf(int f,char *buf,size_t len)
{
read_buf(f,buf,len);
buf[len] = 0;
unsigned char read_byte(int f)
{
- unsigned char c;
- read_buf(f,(char *)&c,1);
- return c;
+ unsigned char c;
+ read_buf(f, (char *)&c, 1);
+ return c;
}
-static char last_byte;
-static int last_sparse;
-
-int sparse_end(int f)
+/**
+ * Sleep after writing to limit I/O bandwidth usage.
+ *
+ * @todo Rather than sleeping after each write, it might be better to
+ * use some kind of averaging. The current algorithm seems to always
+ * use a bit less bandwidth than specified, because it doesn't make up
+ * for slow periods. But arguably this is a feature. In addition, we
+ * ought to take the time used to write the data into account.
+ **/
+static void sleep_for_bwlimit(int bytes_written)
{
- if (last_sparse) {
- do_lseek(f,-1,SEEK_CUR);
- return (write(f,&last_byte,1) == 1 ? 0 : -1);
- }
- last_sparse = 0;
- return 0;
-}
+ struct timeval tv;
+ if (!bwlimit)
+ return;
-static int write_sparse(int f,char *buf,int len)
-{
- int l1=0,l2=0;
- int ret;
+ assert(bytes_written > 0);
+ assert(bwlimit > 0);
- for (l1=0;l1<len && buf[l1]==0;l1++) ;
- for (l2=0;l2<(len-l1) && buf[len-(l2+1)]==0;l2++) ;
+ tv.tv_usec = bytes_written * 1000 / bwlimit;
+ tv.tv_sec = tv.tv_usec / 1000000;
+ tv.tv_usec = tv.tv_usec % 1000000;
- last_byte = buf[len-1];
+ select(0, NULL, NULL, NULL, &tv);
+}
- if (l1 == len || l2 > 0)
- last_sparse=1;
- if (l1 > 0)
- do_lseek(f,l1,SEEK_CUR);
+/**
+ * Write len bytes to the file descriptor @p fd.
+ *
+ * This function underlies the multiplexing system. The body of the
+ * application never calls this function directly.
+ **/
+static void writefd_unbuffered(int fd,char *buf,size_t len)
+{
+ size_t total = 0;
+ fd_set w_fds, r_fds;
+ int fd_count, count;
+ struct timeval tv;
- if (l1 == len)
- return len;
+ err_list_push();
- if ((ret=write(f,buf+l1,len-(l1+l2))) != len-(l1+l2)) {
- if (ret == -1 || ret == 0) return ret;
- return (l1+ret);
- }
+ no_flush++;
- if (l2 > 0)
- do_lseek(f,l2,SEEK_CUR);
-
- return len;
-}
+ while (total < len) {
+ FD_ZERO(&w_fds);
+ FD_SET(fd,&w_fds);
+ fd_count = fd;
+ if (io_error_fd != -1) {
+ FD_ZERO(&r_fds);
+ FD_SET(io_error_fd,&r_fds);
+ if (io_error_fd > fd_count)
+ fd_count = io_error_fd;
+ }
+ tv.tv_sec = io_timeout?io_timeout:SELECT_TIMEOUT;
+ tv.tv_usec = 0;
-int write_file(int f,char *buf,int len)
-{
- int ret = 0;
+ errno = 0;
- if (!sparse_files)
- return write(f,buf,len);
+ count = select(fd_count+1,
+ io_error_fd != -1?&r_fds:NULL,
+ &w_fds,NULL,
+ &tv);
- while (len>0) {
- int len1 = MIN(len, SPARSE_WRITE_SIZE);
- int r1 = write_sparse(f, buf, len1);
- if (r1 <= 0) {
- if (ret > 0) return ret;
- return r1;
+ if (count == 0) {
+ check_timeout();
}
- len -= r1;
- buf += r1;
- ret += r1;
- }
- return ret;
-}
+ if (count <= 0) {
+ if (errno == EBADF) {
+ exit_cleanup(RERR_SOCKETIO);
+ }
+ continue;
+ }
-static int writefd_unbuffered(int fd,char *buf,int len)
-{
- int total = 0;
- fd_set w_fds, r_fds;
- int fd_count, count, got_select=0;
- struct timeval tv;
+ if (io_error_fd != -1 && FD_ISSET(io_error_fd, &r_fds)) {
+ read_error_fd();
+ }
- if (buffer_f_in == -1)
- return write(fd,buf,len);
+ if (FD_ISSET(fd, &w_fds)) {
+ int ret;
+ size_t n = len-total;
+ ret = write(fd,buf+total,n);
- while (total < len) {
- int ret = write(fd,buf+total,len-total);
+ if (ret == -1 && errno == EINTR) {
+ continue;
+ }
- if (ret == 0) return total;
+ if (ret == -1 &&
+ (errno == EWOULDBLOCK || errno == EAGAIN)) {
+ msleep(1);
+ continue;
+ }
- if (ret == -1 && !(errno == EWOULDBLOCK || errno == EAGAIN))
- return -1;
+ if (ret <= 0) {
+ /* Don't try to write errors back
+ * across the stream */
+ io_multiplexing_close();
+ rprintf(FERROR, RSYNC_NAME
+ ": writefd_unbuffered failed to write %ld bytes: phase \"%s\": %s\n",
+ (long) len, io_write_phase,
+ strerror(errno));
+ exit_cleanup(RERR_STREAMIO);
+ }
- if (ret == -1 && got_select) {
- /* hmmm, we got a write select on the fd and then failed to write.
- Why doesn't that mean that the fd is dead? It doesn't on some
- systems it seems (eg. IRIX) */
- u_sleep(1000);
-#if 0
- rprintf(FERROR,"write exception\n");
- exit_cleanup(1);
-#endif
- }
-
- got_select = 0;
-
-
- if (ret == -1) {
- read_check(buffer_f_in);
-
- fd_count = fd+1;
- FD_ZERO(&w_fds);
- FD_ZERO(&r_fds);
- FD_SET(fd,&w_fds);
- if (buffer_f_in != -1) {
- FD_SET(buffer_f_in,&r_fds);
- if (buffer_f_in > fd)
- fd_count = buffer_f_in+1;
- }
-
- tv.tv_sec = BLOCKING_TIMEOUT;
- tv.tv_usec = 0;
- count = select(fd_count,buffer_f_in == -1? NULL: &r_fds,
- &w_fds,NULL,&tv);
- if (count == -1 && errno != EINTR) {
- if (verbose > 1)
- rprintf(FERROR,"select error: %s\n", strerror(errno));
- exit_cleanup(1);
- }
-
- if (count == 0) {
- check_timeout();
- continue;
- }
-
- if (FD_ISSET(fd, &w_fds)) {
- got_select = 1;
- }
- } else {
- total += ret;
- }
- }
-
- if (io_timeout)
- last_io = time(NULL);
-
- return total;
+ sleep_for_bwlimit(ret);
+
+ total += ret;
+
+ if (io_timeout)
+ last_io = time(NULL);
+ }
+ }
+
+ no_flush--;
}
+
static char *io_buffer;
static int io_buffer_count;
void io_start_buffering(int fd)
{
+ if (io_buffer) return;
+ multiplex_out_fd = fd;
io_buffer = (char *)malloc(IO_BUFFER_SIZE);
if (!io_buffer) out_of_memory("writefd");
io_buffer_count = 0;
}
-void io_end_buffering(int fd)
+/**
+ * Write an message to a multiplexed stream. If this fails then rsync
+ * exits.
+ **/
+static void mplex_write(int fd, enum logcode code, char *buf, size_t len)
{
- if (io_buffer_count) {
- if (writefd_unbuffered(fd, io_buffer,
- io_buffer_count) !=
- io_buffer_count) {
- rprintf(FERROR,"write failed\n");
- exit_cleanup(1);
- }
- io_buffer_count = 0;
+ char buffer[4096];
+ size_t n = len;
+
+ SIVAL(buffer, 0, ((MPLEX_BASE + (int)code)<<24) + len);
+
+ if (n > (sizeof buffer - 4)) {
+ n = sizeof buffer - 4;
+ }
+
+ memcpy(&buffer[4], buf, n);
+ writefd_unbuffered(fd, buffer, n+4);
+
+ len -= n;
+ buf += n;
+
+ if (len) {
+ writefd_unbuffered(fd, buf, len);
}
- free(io_buffer);
- io_buffer = NULL;
}
-static int writefd(int fd,char *buf,int len1)
+
+void io_flush(void)
{
- int len = len1;
+ int fd = multiplex_out_fd;
+
+ err_list_push();
- if (!io_buffer) return writefd_unbuffered(fd, buf, len);
+ if (!io_buffer_count || no_flush) return;
+
+ if (io_multiplexing_out) {
+ mplex_write(fd, FNONE, io_buffer, io_buffer_count);
+ } else {
+ writefd_unbuffered(fd, io_buffer, io_buffer_count);
+ }
+ io_buffer_count = 0;
+}
+
+
+void io_end_buffering(void)
+{
+ io_flush();
+ if (!io_multiplexing_out) {
+ free(io_buffer);
+ io_buffer = NULL;
+ }
+}
+
+static void writefd(int fd,char *buf,size_t len)
+{
+ stats.total_written += len;
+
+ err_list_push();
+
+ if (!io_buffer || fd != multiplex_out_fd) {
+ writefd_unbuffered(fd, buf, len);
+ return;
+ }
while (len) {
- int n = MIN(len, IO_BUFFER_SIZE-io_buffer_count);
+ int n = MIN((int) len, IO_BUFFER_SIZE-io_buffer_count);
if (n > 0) {
memcpy(io_buffer+io_buffer_count, buf, n);
buf += n;
len -= n;
io_buffer_count += n;
}
-
- if (io_buffer_count == IO_BUFFER_SIZE) {
- if (writefd_unbuffered(fd, io_buffer,
- io_buffer_count) !=
- io_buffer_count) {
- return -1;
- }
- io_buffer_count = 0;
- }
- }
- return len1;
+ if (io_buffer_count == IO_BUFFER_SIZE) io_flush();
+ }
}
void write_int(int f,int32 x)
{
- int ret;
- char b[4];
- SIVAL(b,0,x);
- if ((ret=writefd(f,b,4)) != 4) {
- rprintf(FERROR,"write_int failed : %s\n",
- ret==-1?strerror(errno):"EOF");
- exit_cleanup(1);
- }
- total_written += 4;
+ char b[4];
+ SIVAL(b,0,x);
+ writefd(f,b,4);
}
+
+void write_int_named(int f, int32 x, const char *phase)
+{
+ io_write_phase = phase;
+ write_int(f, x);
+ io_write_phase = phase_unknown;
+}
+
+
+/*
+ * Note: int64 may actually be a 32-bit type if ./configure couldn't find any
+ * 64-bit types on this platform.
+ */
void write_longint(int f, int64 x)
{
- extern int remote_version;
char b[8];
- int ret;
- if (remote_version < 16 || x <= 0x7FFFFFFF) {
+ if (x <= 0x7FFFFFFF) {
write_int(f, (int)x);
return;
}
- write_int(f, -1);
+#ifdef NO_INT64
+ rprintf(FERROR,"Integer overflow - attempted 64 bit offset\n");
+ exit_cleanup(RERR_UNSUPPORTED);
+#else
+ write_int(f, (int32)0xFFFFFFFF);
SIVAL(b,0,(x&0xFFFFFFFF));
SIVAL(b,4,((x>>32)&0xFFFFFFFF));
- if ((ret=writefd(f,b,8)) != 8) {
- rprintf(FERROR,"write_longint failed : %s\n",
- ret==-1?strerror(errno):"EOF");
- exit_cleanup(1);
- }
- total_written += 8;
+ writefd(f,b,8);
+#endif
}
-void write_buf(int f,char *buf,int len)
+void write_buf(int f,char *buf,size_t len)
{
- int ret;
- if ((ret=writefd(f,buf,len)) != len) {
- rprintf(FERROR,"write_buf failed : %s\n",
- ret==-1?strerror(errno):"EOF");
- exit_cleanup(1);
- }
- total_written += len;
+ writefd(f,buf,len);
}
-/* write a string to the connection */
-void write_sbuf(int f,char *buf)
+/** Write a string to the connection */
+static void write_sbuf(int f,char *buf)
{
write_buf(f, buf, strlen(buf));
}
write_buf(f,(char *)&c,1);
}
-void write_flush(int f)
-{
-}
-int read_line(int f, char *buf, int maxlen)
+/**
+ * Read a line of up to @p maxlen characters into @p buf. Does not
+ * contain a trailing newline or carriage return.
+ *
+ * @return 1 for success; 0 for io error or truncation.
+ **/
+int read_line(int f, char *buf, size_t maxlen)
{
while (maxlen) {
+ buf[0] = 0;
read_buf(f, buf, 1);
+ if (buf[0] == 0)
+ return 0;
if (buf[0] == '\n') {
buf[0] = 0;
break;
*buf = 0;
return 0;
}
+
return 1;
}
va_list ap;
char buf[1024];
int len;
-
- va_start(ap, format);
-#if HAVE_VSNPRINTF
- len = vsnprintf(buf, sizeof(buf)-1, format, ap);
-#else
- vsprintf(buf, format, ap);
- len = strlen(buf);
-#endif
+ va_start(ap, format);
+ len = vsnprintf(buf, sizeof buf, format, ap);
va_end(ap);
- if (len < 0) exit_cleanup(1);
+ if (len < 0) exit_cleanup(RERR_STREAMIO);
write_sbuf(fd, buf);
}
+
+
+/** Setup for multiplexing an error stream with the data stream */
+void io_start_multiplex_out(int fd)
+{
+ multiplex_out_fd = fd;
+ io_flush();
+ io_start_buffering(fd);
+ io_multiplexing_out = 1;
+}
+
+/** Setup for multiplexing an error stream with the data stream */
+void io_start_multiplex_in(int fd)
+{
+ multiplex_in_fd = fd;
+ io_flush();
+ io_multiplexing_in = 1;
+}
+
+/** Write an message to the multiplexed error stream */
+int io_multiplex_write(enum logcode code, char *buf, size_t len)
+{
+ if (!io_multiplexing_out) return 0;
+
+ io_flush();
+ stats.total_written += (len+4);
+ mplex_write(multiplex_out_fd, code, buf, len);
+ return 1;
+}
+
+/** Stop output multiplexing */
+void io_multiplexing_close(void)
+{
+ io_multiplexing_out = 0;
+}
+