#define XMIT_TOP_DIR (1<<0)
#define XMIT_SAME_MODE (1<<1)
#define XMIT_SAME_RDEV_pre28 (1<<2) /* protocols 20 - 27 */
-#define XMIT_EXTENDED_FLAGS (1<<2) /* protocols 28 - NOW */
+#define XMIT_EXTENDED_FLAGS (1<<2) /* protocols 28 - now */
#define XMIT_SAME_UID (1<<3)
#define XMIT_SAME_GID (1<<4)
#define XMIT_SAME_NAME (1<<5)
#define XMIT_LONG_NAME (1<<6)
#define XMIT_SAME_TIME (1<<7)
-#define XMIT_SAME_RDEV_MAJOR (1<<8) /* protocols 28 - NOW (devices only) */
-#define XMIT_NON_XFER_DIR (1<<8) /* protocols 30 - NOW (dirs only) */
-#define XMIT_HLINKED (1<<9) /* protocols 28 - NOW */
+#define XMIT_SAME_RDEV_MAJOR (1<<8) /* protocols 28 - now (devices only) */
+#define XMIT_NON_XFER_DIR (1<<8) /* protocols 30 - now (dirs only) */
+#define XMIT_HLINKED (1<<9) /* protocols 28 - now */
#define XMIT_SAME_DEV_pre30 (1<<10) /* protocols 28 - 29 */
-#define XMIT_USER_NAME_FOLLOWS (1<<10) /* protocols 30 - NOW */
+#define XMIT_USER_NAME_FOLLOWS (1<<10) /* protocols 30 - now */
#define XMIT_RDEV_MINOR_8_pre30 (1<<11) /* protocols 28 - 29 */
-#define XMIT_GROUP_NAME_FOLLOWS (1<<11) /* protocols 30 - NOW */
-#define XMIT_HLINK_FIRST (1<<12) /* protocols 30 - NOW (HLINKED files only) */
+#define XMIT_GROUP_NAME_FOLLOWS (1<<11) /* protocols 30 - now */
+#define XMIT_HLINK_FIRST (1<<12) /* protocols 30 - now (HLINKED files only) */
/* These flags are used in the live flist data. */
#define FLAG_TOP_DIR (1<<0) /* sender/receiver/generator */
#define FLAG_FILE_SENT (1<<1) /* sender/receiver/generator */
-#define FLAG_DIR_CHANGED (1<<1) /* generator */
+#define FLAG_DIR_CREATED (1<<1) /* generator */
#define FLAG_XFER_DIR (1<<2) /* sender/receiver/generator */
#define FLAG_MOUNT_DIR (1<<3) /* sender/generator */
#define FLAG_DUPLICATE (1<<4) /* sender */
/* This is used when working on a new protocol version in CVS, and should
* be a new non-zero value for each CVS change that affects the protocol.
* It must ALWAYS be 0 when the protocol goes final! */
-#define SUBPROTOCOL_VERSION 6
+#define SUBPROTOCOL_VERSION 8
/* We refuse to interoperate with versions that are not in this range.
* Note that we assume we'll work with later versions: the onus is on
#ifndef ICONV_CONST
#define ICONV_CONST
#endif
-#elif defined ICONV_CONST
+#else
+#ifdef ICONV_CONST
#undef ICONV_CONST
#endif
+#ifdef iconv_t
+#undef iconv_t
+#endif
+#define iconv_t int
+#endif
#include <assert.h>
# define SIZEOF_INT64 SIZEOF_OFF_T
#endif
-/* Starting from protocol version 26, we always use 64-bit
- * ino_t and dev_t internally, even if this platform does not
- * allow files to have 64-bit inums. That's because the
- * receiver needs to find duplicate (dev,ino) tuples to detect
- * hardlinks, and it might have files coming from a platform
- * that has 64-bit inums.
- *
- * The only exception is if we're on a platform with no 64-bit type at
- * all.
- *
- * Because we use read_longint() to get these off the wire, if you
- * transfer devices or hardlinks with dev or inum > 2**32 to a machine
- * with no 64-bit types then you will get an overflow error. Probably
- * not many people have that combination of machines, and you can
- * avoid it by not preserving hardlinks or not transferring device
- * nodes. It's not clear that any other behaviour is better.
- *
- * Note that if you transfer devices from a 64-bit-devt machine (say,
- * Solaris) to a 32-bit-devt machine (say, Linux-2.2/x86) then the
- * device numbers will be truncated. But it's a kind of silly thing
- * to do anyhow.
- *
- * FIXME: I don't think the code in flist.c has ever worked on a system
- * where dev_t is a struct.
- */
+struct hashtable {
+ void *nodes;
+ int32 size, entries;
+ uint32 node_size;
+};
-struct idev_node {
- int64 key;
+struct ht_int32_node {
+ void *data;
+ int32 key;
+};
+
+struct ht_int64_node {
void *data;
+ int64 key;
};
+#define HT_NODE(tbl, bkts, i) ((void*)((char*)(bkts) + (i)*(tbl)->node_size))
+#define HT_KEY(node, k64) ((k64)? ((struct ht_int64_node*)(node))->key \
+ : (int64)((struct ht_int32_node*)(node))->key)
+
#ifndef MIN
#define MIN(a,b) ((a)<(b)?(a):(b))
#endif
};
extern int file_extra_cnt;
+extern int inc_recurse;
extern int uid_ndx;
extern int gid_ndx;
extern int acls_ndx;
#define OPT_EXTRA(f,bump) ((union file_extras*)(f) - file_extra_cnt - 1 - (bump))
#define LEN64_BUMP(f) ((f)->flags & FLAG_LENGTH64 ? 1 : 0)
-#define HLINK_BUMP(f) (F_IS_HLINKED(f) ? 1 : 0)
+#define HLINK_BUMP(f) ((f)->flags & (FLAG_HLINKED|FLAG_HLINK_DONE) ? inc_recurse+1 : 0)
#define ACL_BUMP(f) (acls_ndx ? 1 : 0)
/* The length applies to all items. */
/* These items are per-entry optional: */
#define F_HL_GNUM(f) OPT_EXTRA(f, LEN64_BUMP(f))->num /* non-dirs */
-#define F_HL_PREV(f) OPT_EXTRA(f, LEN64_BUMP(f))->num /* non-dirs */
+#define F_HL_PREV(f) OPT_EXTRA(f, LEN64_BUMP(f)+inc_recurse)->num /* non-dirs */
#define F_DIR_NODE_P(f) (&OPT_EXTRA(f, LEN64_BUMP(f) \
+ DIRNODE_EXTRA_CNT - 1)->num) /* sender dirs */
#define F_DIR_DEFACL(f) OPT_EXTRA(f, LEN64_BUMP(f))->unum /* receiver dirs */
#define EXPAND_ITEM_LIST(lp, type, incr) \
(type*)expand_item_list(lp, sizeof (type), #type, incr)
+#define EMPTY_XBUF {NULL, 0, 0, 0}
+
+typedef struct {
+ char *buf;
+ size_t pos; /* pos = read pos in the buf */
+ size_t len; /* len = chars following pos */
+ size_t size; /* size = total space in buf */
+} xbuf;
+
+#define INIT_XBUF(xb, str, ln, sz) (xb).buf = (str), (xb).len = (ln), (xb).size = (sz), (xb).pos = 0
+#define INIT_XBUF_STRLEN(xb, str) (xb).buf = (str), (xb).len = strlen((xb).buf), (xb).size = (-1), (xb).pos = 0
+/* This one is used to make an output xbuf based on a char[] buffer: */
+#define INIT_CONST_XBUF(xb, bf) (xb).buf = (bf), (xb).size = sizeof (bf), (xb).len = (xb).pos = 0
+
+#define ICB_EXPAND_OUT (1<<0)
+#define ICB_INCLUDE_BAD (1<<1)
+#define ICB_INCLUDE_INCOMPLETE (1<<2)
+
+#define RL_EOL_NULLS (1<<0)
+#define RL_DUMP_COMMENTS (1<<1)
+#define RL_CONVERT (1<<2)
+
#include "byteorder.h"
#include "lib/mdigest.h"
#include "lib/wildmatch.h"
#define NS(s) ((s)?(s):"<NULL>")
/* Convenient wrappers for malloc and realloc. Use them. */
-#define new(type) ((type *)malloc(sizeof(type)))
-#define new_array(type, num) ((type *)_new_array(sizeof(type), (num)))
-#define realloc_array(ptr, type, num) ((type *)_realloc_array((ptr), sizeof(type), (num)))
+#define new(type) ((type*)malloc(sizeof (type)))
+#define new0(type) ((type*)calloc(1, sizeof (type)))
+#define new_array(type, num) ((type*)_new_array((num), sizeof (type), 0))
+#define new_array0(type, num) ((type*)_new_array((num), sizeof (type), 1))
+#define realloc_array(ptr, type, num) ((type*)_realloc_array((ptr), sizeof(type), (num)))
/* use magic gcc attributes to catch format errors */
void rprintf(enum logcode , const char *, ...)
#ifdef MAINTAINER_MODE
const char *get_panic_action(void);
#endif
-
-static inline int to_wire_mode(mode_t mode)
-{
-#ifdef SUPPORT_LINKS
-#if _S_IFLNK != 0120000
- if (S_ISLNK(mode))
- return (mode & ~(_S_IFMT)) | 0120000;
-#endif
-#endif
- return mode;
-}
-
-static inline mode_t from_wire_mode(int mode)
-{
-#if _S_IFLNK != 0120000
- if ((mode & (_S_IFMT)) == 0120000)
- return (mode & ~(_S_IFMT)) | _S_IFLNK;
-#endif
- return mode;
-}
-
-static inline int
-isDigit(const char *ptr)
-{
- return isdigit(*(unsigned char *)ptr);
-}
-
-static inline int
-isPrint(const char *ptr)
-{
- return isprint(*(unsigned char *)ptr);
-}
-
-static inline int
-isSpace(const char *ptr)
-{
- return isspace(*(unsigned char *)ptr);
-}
-
-static inline int
-isLower(const char *ptr)
-{
- return islower(*(unsigned char *)ptr);
-}
-
-static inline int
-isUpper(const char *ptr)
-{
- return isupper(*(unsigned char *)ptr);
-}
-
-static inline int
-toLower(const char *ptr)
-{
- return tolower(*(unsigned char *)ptr);
-}
-
-static inline int
-toUpper(const char *ptr)
-{
- return toupper(*(unsigned char *)ptr);
-}
Matt McCutchen's Web Site / rsync / rsync.git / blobdiff