# General-purpose test functions for rsync.
-TMP="$scratchdir"
-FROM=${TMP}/from
-TO=${TMP}/to
-F1=text1
-LOG=${TMP}/log
-RSYNC="$rsync_bin"
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version
+# 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+
+tmpdir="$scratchdir"
+fromdir="$tmpdir/from"
+todir="$tmpdir/to"
+chkdir="$tmpdir/chk"
+
+# Berkley's nice.
+PATH="$PATH:/usr/ucb"
+
+if diff -u "$srcdir/testsuite/rsync.fns" "$srcdir/testsuite/rsync.fns" >/dev/null 2>&1; then
+ diffopt="-u"
+else
+ diffopt="-c"
+fi
runtest() {
echo $ECHO_N "Test $1: $ECHO_C"
- eval "$2"
+ if eval "$2"
+ then
+ echo "$ECHO_T done."
+ return 0
+ else
+ echo "$ECHO_T failed!"
+ return 1
+ fi
}
printmsg() {
echo "$1"
}
+
+rsync_ls_lR() {
+ find "$@" -print | sort | sed 's/ /\\ /g' | xargs "$TOOLDIR/tls"
+}
+
+rsync_getgroups() {
+ "$TOOLDIR/getgroups"
+}
+
+
+####################
+# Build test directories $todir and $fromdir, with $fromdir full of files.
+
hands_setup() {
- [ -d $FROM ] || mkdir $FROM
- [ -d $TO ] || mkdir $TO
+ # Clean before creation
+ rm -rf "$fromdir"
+ rm -rf "$todir"
+
+ [ -d "$tmpdir" ] || mkdir "$tmpdir"
+ [ -d "$fromdir" ] || mkdir "$fromdir"
+ [ -d "$todir" ] || mkdir "$todir"
+
+ # On some BSD systems, the umask affects the mode of created
+ # symlinks, even though the mode apparently has no effect on how
+ # the links behave in the future, and it cannot be changed using
+ # chmod! rsync always sets its umask to 000 so that it can
+ # accurately recreate permissions, but this script is probably run
+ # with a different umask.
+
+ # This causes a little problem that "ls -l" of the two will not be
+ # the same. So, we need to set our umask before doing any creations.
# set up test data
- touch ${FROM}/empty
- mkdir ${FROM}/emptydir
-
- # a few hundred lines of test
- ls -lR / | head -200 > ${FROM}/filelist
-
- # This might fail on systems that don't have -n
- echo $ECHO_N "This file has no trailing lf$ECHO_C" > ${FROM}/nolf
- ln -s nolf ${FROM}/nolf-symlink
- cat $srcdir/*.c | head -2000 > ${FROM}/${F1}
- mkdir ${FROM}/dir
- cp ${FROM}/${F1} ${FROM}/dir
- mkdir ${FROM}/dir/subdir
- mkdir ${FROM}/dir/subdir/subsubdir
- ls -ltr /etc > ${FROM}/dir/subdir/subsubdir/etc-ltr-list
- mkdir ${FROM}/dir/subdir/subsubdir2
- ls -lt /bin > ${FROM}/dir/subdir/subsubdir2/bin-lt-list
+ touch "$fromdir/empty"
+ mkdir "$fromdir/emptydir"
+
+ # a hundred lines of text or so
+ rsync_ls_lR "$srcdir" > "$fromdir/filelist"
+
+ echo $ECHO_N "This file has no trailing lf$ECHO_C" > "$fromdir/nolf"
+ umask 0
+ ln -s nolf "$fromdir/nolf-symlink"
+ umask 022
+
+ cat $srcdir/*.c > "$fromdir/text"
+ mkdir "$fromdir/dir"
+ cp "$fromdir/text" "$fromdir/dir"
+ mkdir "$fromdir/dir/subdir"
+ echo some data > "$fromdir/dir/subdir/foobar.baz"
+ mkdir "$fromdir/dir/subdir/subsubdir"
+ if [ -r /etc ]; then
+ ls -ltr /etc > "$fromdir/dir/subdir/subsubdir/etc-ltr-list"
+ else
+ ls -ltr / > "$fromdir/dir/subdir/subsubdir/etc-ltr-list"
+ fi
+ mkdir "$fromdir/dir/subdir/subsubdir2"
+ if [ -r /bin ]; then
+ ls -lt /bin > "$fromdir/dir/subdir/subsubdir2/bin-lt-list"
+ else
+ ls -lt / > "$fromdir/dir/subdir/subsubdir2/bin-lt-list"
+ fi
+
+# echo testing head:
+# ls -lR "$srcdir" | head -10 || echo failed
}
+####################
+# Many machines do not have "mkdir -p", so we have to build up long paths.
+# How boring.
+makepath () {
+ echo " makepath $1"
+ p="$1"
+ (
+ # Absolut Unix.
+ if echo $p | grep '^/' >/dev/null
+ then
+ cd /
+ fi
+
+ # This will break if $1 contains a space.
+ for c in `echo $p | tr '/' ' '`
+ do
+ if [ -d "$c" ] || mkdir "$c"
+ then
+ cd "$c" || return $?
+ else
+ echo "failed to create $c" >&2; return $?
+ fi
+ done
+ )
+}
+
+
+
###########################
# Run a test (in '$1') then compare directories $2 and $3 to see if
# there are any difference. If there are, explain them.
+# So normally basically $1 should be an rsync command, and $2 and $3
+# the source and destination directories. This is only good when you
+# expect to transfer the whole directory exactly as is. If some files
+# should be excluded, you might need to use something else.
+
checkit() {
- log=${LOG}
failed=
- # the log accumulates all output; we only display it if there
- # is a problem.
- echo "Running: \"$1\"" >${log}
- echo "">>${log}
- eval "$1" >>${log} 2>&1
+ # We can just write everything to stdout/stderr, because the
+ # wrapper hides it unless there is a problem.
+
+ echo "Running: \"$1\""
+ eval "$1"
status=$?
if [ $status != 0 ]; then
failed="YES";
fi
- echo "-------------">>${log}
- echo "check how the files compare with diff:">>${log}
- echo "">>${log}
- diff -ur $2 $3 >>${log} 2>&1 || failed=YES
- echo "-------------">>${log}
- echo "check how the directory listings compare with diff:">>${log}
- echo "">>${log}
- ( cd $2 ; ls -laR ) > ${TMP}/ls-from 2>>${log}
- ( cd $3 ; ls -laR ) > ${TMP}/ls-to 2>>${log}
- diff -u ${TMP}/ls-from ${TMP}/ls-to >>${log} 2>&1 || failed=YES
- if [ -z "${failed}" ] ; then
- echo "${ECHO_T} done."
- rm $log
+ echo "-------------"
+ echo "check how the directory listings compare with diff:"
+ echo ""
+ ( cd "$2" && rsync_ls_lR . ) > "$tmpdir/ls-from"
+ ( cd "$3" && rsync_ls_lR . ) > "$tmpdir/ls-to"
+ diff $diffopt "$tmpdir/ls-from" "$tmpdir/ls-to" || failed=YES
+
+ echo "-------------"
+ echo "check how the files compare with diff:"
+ echo ""
+ if [ "x$4" != x ]; then
+ echo " === Skipping (as directed) ==="
+ else
+ diff -r $diffopt "$2" "$3" || failed=YES
+ fi
+
+ echo "-------------"
+ if [ -z "$failed" ] ; then
return 0
else
- echo "${ECHO_T} failed!"
- cat ${log}
- rm ${log}
return 1
fi
}
-# In fact, we need a more general feature of capturing all stderr/log files,
-# and dumping them if something goes wrong.
+build_rsyncd_conf() {
+ # Build an appropriate configuration file
+ conf="$scratchdir/test-rsyncd.conf"
+ echo "building configuration $conf"
+
+ port=2612
+ pidfile="$scratchdir/rsyncd.pid"
+ logfile="$scratchdir/rsyncd.log"
+
+ cat >"$conf" <<EOF
+# rsyncd configuration file autogenerated by $0
+
+pid file = $pidfile
+use chroot = no
+hosts allow = localhost, 127.0.0.1
+log file = $logfile
+exclude = foobar.baz
+max verbosity = 9
-checkforlogs() {
- # skip it if we're under debian-test
- if test -n "${Debian}" ; then return 0 ; fi
+uid = 0
+gid = 0
- if [ -f $1 -a -s $1 ] ; then
- echo "Failures have occurred. $1 follows:" >&2
- cat $1 >&2
- exit 1
- fi
+[test-from]
+ path = $fromdir
+ read only = yes
+
+[test-to]
+ path = $todir
+ read only = no
+EOF
}
+
+build_symlinks() {
+ mkdir "$fromdir"
+ date >"$fromdir/referent"
+ ln -s referent "$fromdir/relative"
+ ln -s "$fromdir/referent" "$fromdir/absolute"
+ ln -s nonexistent "$fromdir/dangling"
+ ln -s "$srcdir/rsync.c" "$fromdir/unsafe"
+}
+
+test_fail() {
+ echo "$@" >&2
+ exit 1
+}
+
+test_skipped() {
+ echo "$@" >&2
+ echo "$@" > "$tmpdir/whyskipped"
+ exit 77
+}
+
+# It failed, but we expected that. don't dump out error logs,
+# because most users won't want to see them. But do leave
+# the working directory around.
+test_xfail() {
+ echo "$@" >&2
+ exit 78
+}
+
+# Determine what shell command will appropriately test for links.
+ln -s foo "$scratchdir/testlink"
+for cmd in test /bin/test /usr/bin/test /usr/ucb/bin/test /usr/ucb/test
+do
+ for switch in -h -L
+ do
+ if $cmd $switch "$scratchdir/testlink" 2>/dev/null
+ then
+ # how nice
+ TEST_SYMLINK_CMD="$cmd $switch"
+ # i wonder if break 2 is portable?
+ break 2
+ fi
+ done
+done
+# ok, now get rid of it
+rm "$scratchdir/testlink"
+
+
+if [ "x$TEST_SYMLINK_CMD" = 'x' ]
+then
+ test_fail "Couldn't determine how to test for symlinks"
+else
+ echo "Testing for symlinks using '$TEST_SYMLINK_CMD'"
+fi
+
+
+# Test whether something is a link, allowing for shell peculiarities
+is_a_link() {
+ # note the variable contains the first option and therefore is not quoted
+ $TEST_SYMLINK_CMD "$1"
+}
+
+
+# We need to set the umask to be reproducible. Note also that when we
+# do some daemon tests as root, we will setuid() and therefore the
+# directory has to be writable by the nobody user in some cases. The
+# best thing is probably to explicitly chmod those directories after
+# creation.
+
+umask 022