.SUFFIXES:
.SUFFIXES: .c .o
-LIBOBJ=lib/fnmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o \
- lib/permstring.o \
- @LIBOBJS@
+HEADERS=byteorder.h config.h errcode.h proto.h rsync.h
+LIBOBJ=lib/wildmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o \
+ lib/permstring.o lib/pool_alloc.o @LIBOBJS@
ZLIBOBJ=zlib/deflate.o zlib/infblock.o zlib/infcodes.o zlib/inffast.o \
zlib/inflate.o zlib/inftrees.o zlib/infutil.o zlib/trees.o \
- zlib/zutil.o zlib/adler32.o
-OBJS1=rsync.o generator.o receiver.o cleanup.o sender.o exclude.o util.o main.o checksum.o match.o syscall.o log.o backup.o
-OBJS2=options.o flist.o io.o compat.o hlink.o token.o uidlist.o socket.o fileio.o batch.o \
- clientname.o
+ zlib/zutil.o zlib/adler32.o
+OBJS1=rsync.o generator.o receiver.o cleanup.o sender.o exclude.o util.o \
+ main.o checksum.o match.o syscall.o log.o backup.o
+OBJS2=options.o flist.o io.o compat.o hlink.o token.o uidlist.o socket.o \
+ fileio.o batch.o clientname.o
OBJS3=progress.o pipe.o
DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o
popt_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \
popt/popthelp.o popt/poptparse.o
OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(DAEMON_OBJ) $(LIBOBJ) $(ZLIBOBJ) @BUILD_POPT@
-TLS_OBJ = tls.o syscall.o lib/permstring.o
+TLS_OBJ = tls.o syscall.o lib/permstring.o
# Programs we must have to run the test cases
-RSYNC_EXE=rsync$(EXEEXT)
-TLS_EXE=tls$(EXEEXT)
-GETGROUPS_EXE=getgroups$(EXEEXT)
-TRIMSLASH_EXE=trimslash$(EXEEXT)
-T_UNSAFE_EXE=t_unsafe$(EXEEXT)
-CHECK_PROGS=$(RSYNC_EXE) $(TLS_EXE) $(GETGROUPS_EXE) \
- $(TRIMSLASH_EXE) $(T_UNSAFE_EXE)
+CHECK_PROGS = rsync$(EXEEXT) tls$(EXEEXT) getgroups$(EXEEXT) \
+ trimslash$(EXEEXT) t_unsafe$(EXEEXT) wildtest$(EXEEXT)
# Objects for CHECK_PROGS to clean
-CHECK_OBJS=getgroups.o t_stub.o t_unsafe.o trimslash.o
+CHECK_OBJS=getgroups.o t_stub.o t_unsafe.o trimslash.o wildtest.o
# note that the -I. is needed to handle config.h when using VPATH
.c.o:
$(CC) -I. -I$(srcdir) $(CFLAGS) $(CPPFLAGS) -c $< @CC_SHOBJ_FLAG@
@OBJ_RESTORE@
-all: $(RSYNC_EXE)
+all: rsync$(EXEEXT)
man: rsync.1 rsyncd.conf.5
install: all
-mkdir -p ${DESTDIR}${bindir}
- ${INSTALLCMD} ${STRIP} -m 755 $(RSYNC_EXE) ${DESTDIR}${bindir}
+ ${INSTALLCMD} ${STRIP} -m 755 rsync$(EXEEXT) ${DESTDIR}${bindir}
-mkdir -p ${DESTDIR}${mandir}/man1
-mkdir -p ${DESTDIR}${mandir}/man5
${INSTALLMAN} -m 644 $(srcdir)/rsync.1 ${DESTDIR}${mandir}/man1
install-strip:
$(MAKE) STRIP='-s' install
-$(RSYNC_EXE): $(OBJS)
- @echo "Please ignore warnings below about mktemp -- it is used in a safe way"
+rsync$(EXEEXT): $(OBJS)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
-$(OBJS): config.h
+$(OBJS): $(HEADERS)
-$(TLS_EXE): $(TLS_OBJ)
+tls$(EXEEXT): $(TLS_OBJ)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TLS_OBJ) $(LIBS)
-$(GETGROUPS_EXE): getgroups.o
+getgroups$(EXEEXT): getgroups.o
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)
TRIMSLASH_OBJ = trimslash.o syscall.o
-$(TRIMSLASH_EXE): $(TRIMSLASH_OBJ)
+trimslash$(EXEEXT): $(TRIMSLASH_OBJ)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)
T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o t_stub.o lib/compat.o lib/snprintf.o
-$(T_UNSAFE_EXE): $(T_UNSAFE_OBJ)
+t_unsafe$(EXEEXT): $(T_UNSAFE_OBJ)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)
# I don't like these rules because CVS can skew the timestamps and
# directories, just in case somebody previously configured things in
# the source directory.
distclean: clean
- rm -f Makefile config.h config.status
- rm -f $(srcdir)/Makefile $(srcdir)/config.h $(srcdir)/config.status
+ rm -f Makefile config.h config.status
+ rm -f $(srcdir)/Makefile $(srcdir)/config.h $(srcdir)/config.status
rm -f config.cache config.log
rm -f $(srcdir)/config.cache $(srcdir)/config.log
finddead:
nm *.o */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
nm *.o */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
- comm -13 nmused.txt nmfns.txt
+ comm -13 nmused.txt nmfns.txt
# 'check' is the GNU name, 'test' is the name for everybody else :-)
.PHONY: check test
# might lose in the future where POSIX diverges from old sh.
check: all $(CHECK_PROGS)
- POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin=`pwd`/$(RSYNC_EXE) srcdir="$(srcdir)" $(srcdir)/runtests.sh
+ POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin=`pwd`/rsync$(EXEEXT) srcdir="$(srcdir)" $(srcdir)/runtests.sh
+
+wildtest.o: wildtest.c lib/wildmatch.c rsync.h
+wildtest$(EXEEXT): wildtest.o
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ wildtest.o @BUILD_POPT@ $(LIBS)
# This does *not* depend on building or installing: you can use it to
# check a version installed from a binary or some other source tree,
# if you want.
installcheck: $(CHECK_PROGS)
- POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/$(RSYNC_EXE)" srcdir="$(srcdir)" $(srcdir)/runtests.sh
+ POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync$(EXEEXT)" srcdir="$(srcdir)" $(srcdir)/runtests.sh
# TODO: Add 'dist' target; need to know which files will be included
# Run the SPLINT (Secure Programming Lint) tool. <www.splint.org>
.PHONY: splint
-splint:
+splint:
splint +unixlib +gnuextensions -weak rsync.c
rsync.dvi: doc/rsync.texinfo
texi2dvi -o $@ $<
-rsync.ps: rsync.dvi
+rsync.ps: rsync.dvi
dvips -ta4 -o $@ $<
rsync.pdf: doc/rsync.texinfo
texi2dvi -o $@ --pdf $<
-doxygen:
+doxygen:
cd $(srcdir) && rm dox/html/* && doxygen
# for maintainers only
-doxygen-upload:
+doxygen-upload:
rsync -avzv $(srcdir)/dox/html/ --delete \
samba.org:/home/httpd/html/rsync/doxygen/head/
Matt McCutchen's Web Site / rsync / rsync.git / blobdiff