mailto(rsync-bugs@samba.org)
-manpage(rsyncd.conf)(5)(10 Feb 2008)()()
+manpage(rsyncd.conf)(5)(29 Jun 2008)()()
manpagename(rsyncd.conf)(configuration file for rsync in daemon mode)
manpagesynopsis()
it to reread the tt(rsyncd.conf) file. The file is re-read on each client
connection.
-manpagesection(GLOBAL OPTIONS)
+manpagesection(GLOBAL PARAMETERS)
The first parameters in the file (before a [module] header) are the
global parameters.
default for that parameter.
startdit()
-dit(bf(motd file)) The "motd file" option allows you to specify a
+dit(bf(motd file)) This parameter allows you to specify a
"message of the day" to display to clients on each connect. This
usually contains site information and any legal notices. The default
is no motd file.
+This can be overridden by the bf(--dparam=motdfile=FILE)
+command-line option when starting the daemon.
-dit(bf(pid file)) The "pid file" option tells the rsync daemon to write
+dit(bf(pid file)) This parameter tells the rsync daemon to write
its process ID to that file. If the file already exists, the rsync
daemon will abort rather than overwrite the file.
+This can be overridden by the bf(--dparam=pidfile=FILE)
+command-line option when starting the daemon.
dit(bf(port)) You can override the default port the daemon will listen on
by specifying this value (defaults to 873). This is ignored if the daemon
will listen on by specifying this value. This is ignored if the daemon is
being run by inetd, and is superseded by the bf(--address) command-line option.
-dit(bf(socket options)) This option can provide endless fun for people
+dit(bf(socket options)) This parameter can provide endless fun for people
who like to tune their systems to the utmost degree. You can set all
sorts of socket options which may make transfers faster (or
slower!). Read the man page for the code(setsockopt()) system call for
details on some of the options you may be able to set. By default no
-special socket options are set. These settings are superseded by the
-bf(--sockopts) command-line option.
+special socket options are set. These settings can also be specified
+via the bf(--sockopts) command-line option.
enddit()
+manpagesection(MODULE PARAMETERS)
-manpagesection(MODULE OPTIONS)
-
-After the global options you should define a number of modules, each
+After the global parameters you should define a number of modules, each
module exports a directory tree as a symbolic name. Modules are
exported by specifying a module name in square brackets [module]
-followed by the options for that module.
+followed by the parameters for that module.
The module name cannot contain a slash or a closing square bracket. If the
name contains whitespace, each internal sequence of whitespace will be
changed into a single space, while leading or trailing whitespace will be
startdit()
-dit(bf(comment)) The "comment" option specifies a description string
+dit(bf(comment)) This parameter specifies a description string
that is displayed next to the module name when clients obtain a list
of available modules. The default is no comment.
-dit(bf(path)) The "path" option specifies the directory in the daemon's
-filesystem to make available in this module. You must specify this option
+dit(bf(path)) This parameter specifies the directory in the daemon's
+filesystem to make available in this module. You must specify this parameter
for each module in tt(rsyncd.conf).
dit(bf(use chroot)) If "use chroot" is true, the rsync daemon will chroot
the advantage of extra protection against possible implementation security
holes, but it has the disadvantages of requiring super-user privileges,
of not being able to follow symbolic links that are either absolute or outside
-of the new root path, and of complicating the preservation of usernames and groups
-(see below). When "use chroot" is false, rsync will: (1) munge symlinks by
+of the new root path, and of complicating the preservation of users and groups
+by name (see below).
+
+As an additional safety feature, you can specify a dot-dir in the module's
+"path" to indicate the point where the chroot should occur. This allows rsync
+to run in a chroot with a non-"/" path for the top of the transfer hierarchy.
+Doing this guards against unintended library loading (since those absolute
+paths will not be inside the transfer hierarchy unless you have used an unwise
+pathname), and lets you setup libraries for the chroot that are outside of the
+transfer. For example, specifying "/var/rsync/./module1" will chroot to the
+"/var/rsync" directory and set the inside-chroot path to "/module1". If you
+had omitted the dot-dir, the chroot would have used the whole path, and the
+inside-chroot path would have been "/".
+
+When "use chroot" is false or the inside-chroot path is not "/", rsync will:
+(1) munge symlinks by
default for security reasons (see "munge symlinks" for a way to turn this
off, but only if you trust your users), (2) substitute leading slashes in
absolute paths with the module's path (so that options such as
bf(--backup-dir), bf(--compare-dest), etc. interpret an absolute path as
rooted in the module's "path" dir), and (3) trim ".." path elements from
-args if rsync believes they would escape the chroot.
+args if rsync believes they would escape the module hierarchy.
The default for "use chroot" is true, and is the safer choice (especially
if the module is not read-only).
-In order to preserve usernames and groupnames, rsync needs to be able to
+When this parameter is enabled, rsync will not attempt to map users and groups
+by name (by default), but instead copy IDs as though bf(--numeric-ids) had
+been specified. In order to enable name-mapping, rsync needs to be able to
use the standard library functions for looking up names and IDs (i.e.
-code(getpwuid()), code(getgrgid()), code(getpwname()), and code(getgrnam())). This means a
-process in the chroot namespace will need to have access to the resources
+code(getpwuid()), code(getgrgid()), code(getpwname()), and code(getgrnam())).
+This means the rsync
+process in the chroot hierarchy will need to have access to the resources
used by these library functions (traditionally /etc/passwd and
-/etc/group). If these resources are not available, rsync will only be
-able to copy the IDs, just as if the bf(--numeric-ids) option had been
-specified.
-
-Note that you are free to setup user/group information in the chroot area
-differently from your normal system. For example, you could abbreviate
-the list of users and groups. Also, you can protect this information from
-being downloaded/uploaded by adding an exclude rule to the rsyncd.conf file
-(e.g. "bf(exclude = /etc/**)"). Note that having the exclusion affect uploads
-is a relatively new feature in rsync, so make sure your daemon is
-at least 2.6.3 to effect this. Also note that it is safest to exclude a
-directory and all its contents combining the rule "/some/dir/" with the
-rule "/some/dir/**" just to be sure that rsync will not allow deeper
-access to some of the excluded files inside the directory (rsync tries to
-do this automatically, but you might as well specify both to be extra
-sure).
-
-dit(bf(munge symlinks)) The "munge symlinks" option tells rsync to modify
-all incoming symlinks in a way that makes them unusable but recoverable
-(see below). This should help protect your files from user trickery when
+/etc/group, but perhaps additional dynamic libraries as well).
+
+If you copy the necessary resources into the module's chroot area, you
+should protect them through your OS's normal user/group or ACL settings (to
+prevent the rsync module's user from being able to change them), and then
+hide them from the user's view via "exclude" (see how in the discussion of
+that parameter). At that point it will be safe to enable the mapping of users
+and groups by name using the "numeric ids" daemon parameter (see below).
+
+Note also that you are free to setup custom user/group information in the
+chroot area that is different from your normal system. For example, you
+could abbreviate the list of users and groups.
+
+dit(bf(numeric ids)) Enabling this parameter disables the mapping
+of users and groups by name for the current daemon module. This prevents
+the daemon from trying to load any user/group-related files or libraries.
+This enabling makes the transfer behave as if the client had passed
+the bf(--numeric-ids) command-line option. By default, this parameter is
+enabled for chroot modules and disabled for non-chroot modules.
+
+A chroot-enabled module should not have this parameter enabled unless you've
+taken steps to ensure that the module has the necessary resources it needs
+to translate names, and that it is not possible for a user to change those
+resources.
+
+dit(bf(munge symlinks)) This parameter tells rsync to modify
+all symlinks in the same way as the (non-daemon-affecting)
+bf(--munge-links) command-line option (using a method described below).
+This should help protect your files from user trickery when
your daemon module is writable. The default is disabled when "use chroot"
-is on and enabled when "use chroot" is off.
+is on and the inside-chroot path is "/", otherwise it is enabled.
-If you disable this option on a daemon that is not read-only, there
+If you disable this parameter on a daemon that is not read-only, there
are tricks that a user can play with uploaded symlinks to access
daemon-excluded items (if your module has any), and, if "use chroot"
is off, rsync can even be tricked into showing or changing data that
The way rsync disables the use of symlinks is to prefix each one with
the string "/rsyncd-munged/". This prevents the links from being used
-as long as that directory does not exist. When this option is enabled,
+as long as that directory does not exist. When this parameter is enabled,
rsync will refuse to run if that path is a directory or a symlink to
-a directory. When using the "munge symlinks" option in a chroot area,
-you should add this path to the exclude setting for the module so that
+a directory. When using the "munge symlinks" parameter in a chroot area
+that has an inside-chroot path of "/", you should add "/rsyncd-munged/"
+to the exclude setting for the module so that
a user can't try to create it.
Note: rsync makes no attempt to verify that any pre-existing symlinks in
-the hierarchy are as safe as you want them to be. If you setup an rsync
+the module's hierarchy are as safe as you want them to be (unless, of
+course, it just copied in the whole hierarchy). If you setup an rsync
daemon on a new area or locally add symlinks, you can manually protect your
symlinks from being abused by prefixing "/rsyncd-munged/" to the start of
every symlink's value. There is a perl script in the support directory
of the source code named "munge-symlinks" that can be used to add or remove
this prefix from your symlinks.
-When this option is disabled on a writable module and "use chroot" is off,
+When this parameter is disabled on a writable module and "use chroot" is off
+(or the inside-chroot path is not "/"),
incoming symlinks will be modified to drop a leading slash and to remove ".."
path elements that rsync believes will allow a symlink to escape the module's
hierarchy. There are tricky ways to work around this, though, so you had
-better trust your users if you choose this combination of options.
-
-dit(bf(max connections)) The "max connections" option allows you to
+better trust your users if you choose this combination of parameters.
+
+dit(bf(charset)) This specifies the name of the character set in which the
+module's filenames are stored. If the client uses an bf(--iconv) option,
+the daemon will use the value of the "charset" parameter regardless of the
+character set the client actually passed. This allows the daemon to
+support charset conversion in a chroot module without extra files in the
+chroot area, and also ensures that name-translation is done in a consistent
+manner. If the "charset" parameter is not set, the bf(--iconv) option is
+refused, just as if "iconv" had been specified via "refuse options".
+
+If you wish to force users to always use bf(--iconv) for a particular
+module, add "no-iconv" to the "refuse options" parameter. Keep in mind
+that this will restrict access to your module to very new rsync clients.
+
+dit(bf(max connections)) This parameter allows you to
specify the maximum number of simultaneous connections you will allow.
Any clients connecting when the maximum has been reached will receive a
message telling them to try later. The default is 0, which means no limit.
A negative value disables the module.
-See also the "lock file" option.
+See also the "lock file" parameter.
-dit(bf(log file)) When the "log file" option is set to a non-empty
+dit(bf(log file)) When the "log file" parameter is set to a non-empty
string, the rsync daemon will log messages to the indicated file rather
than using syslog. This is particularly useful on systems (such as AIX)
where code(syslog()) doesn't work for chrooted programs. The file is
globally, the global log will still contain any authorization failures
or config-file error messages.
-If the daemon fails to open to specified file, it will fall back to
+If the daemon fails to open the specified file, it will fall back to
using syslog and output an error about the failure. (Note that the
failure to open the specified log file used to be a fatal error.)
-dit(bf(syslog facility)) The "syslog facility" option allows you to
+This setting can be overridden by using the bf(--log-file=FILE) or
+bf(--dparam=logfile=FILE) command-line options. The former overrides
+all the log-file parameters of the daemon and all module settings.
+The latter sets the daemon's log file and the default for all the
+modules, which still allows modules to override the default setting.
+
+dit(bf(syslog facility)) This parameter allows you to
specify the syslog facility name to use when logging messages from the
rsync daemon. You may use any standard syslog facility name which is
defined on your system. Common names are auth, authpriv, cron, daemon,
non-empty string (either set in the per-modules settings, or inherited
from the global settings).
-dit(bf(max verbosity)) The "max verbosity" option allows you to control
+dit(bf(max verbosity)) This parameter allows you to control
the maximum amount of verbose information that you'll allow the daemon to
generate (since the information goes into the log file). The default is 1,
which allows the client to request one level of verbosity.
-dit(bf(lock file)) The "lock file" option specifies the file to use to
-support the "max connections" option. The rsync daemon uses record
+dit(bf(lock file)) This parameter specifies the file to use to
+support the "max connections" parameter. The rsync daemon uses record
locking on this file to ensure that the max connections limit is not
exceeded for the modules sharing the lock file.
The default is tt(/var/run/rsyncd.lock).
-dit(bf(read only)) The "read only" option determines whether clients
+dit(bf(read only)) This parameter determines whether clients
will be able to upload files or not. If "read only" is true then any
attempted uploads will fail. If "read only" is false then uploads will
be possible if file permissions on the daemon side allow them. The default
is for all modules to be read only.
-dit(bf(write only)) The "write only" option determines whether clients
+dit(bf(write only)) This parameter determines whether clients
will be able to download files or not. If "write only" is true then any
attempted downloads will fail. If "write only" is false then downloads
will be possible if file permissions on the daemon side allow them. The
-default is for this option to be disabled.
-
-dit(bf(list)) The "list" option determines if this module should be
-listed when the client asks for a listing of available modules. By
-setting this to false you can create hidden modules. The default is
-for modules to be listable.
-
-dit(bf(uid)) The "uid" option specifies the user name or user ID that
+default is for this parameter to be disabled.
+
+dit(bf(list)) This parameter determines whether this module is
+listed when the client asks for a listing of available modules. In addition,
+if this is false, the daemon will pretend the module does not exist
+when a client denied by "hosts allow" or "hosts deny" attempts to access it.
+Realize that if "reverse lookup" is disabled globally but enabled for the
+module, the resulting reverse lookup to a potentially client-controlled DNS
+server may still reveal to the client that it hit an existing module.
+The default is for modules to be listable.
+
+dit(bf(uid)) This parameter specifies the user name or user ID that
file transfers to and from that module should take place as when the daemon
-was run as root. In combination with the "gid" option this determines what
-file permissions are available. The default is uid -2, which is normally
-the user "nobody".
-
-dit(bf(gid)) The "gid" option specifies the group name or group ID that
-file transfers to and from that module should take place as when the daemon
-was run as root. This complements the "uid" option. The default is gid -2,
-which is normally the group "nobody".
+was run as root. In combination with the "gid" parameter this determines what
+file permissions are available. The default when run by a super-user is to
+switch to the system's "nobody" user. The default for a non-super-user is to
+not try to change the user. See also the "gid" parameter.
+
+dit(bf(gid)) This parameter specifies one or more group names/IDs that will be
+used when accessing the module. The first one will be the default group, and
+any extra ones be set as supplemental groups. You may also specify a "*" as
+the first gid in the list, which will be replaced by all the normal groups for
+the transfer's user (see "uid"). The default when run by a super-user is to
+switch to your OS's "nobody" (or perhaps "nogroup") group with no other
+supplementary groups. The default for a non-super-user is to not change any
+group attributes (and indeed, your OS may not allow a non-super-user to try to
+change their group settings).
dit(bf(fake super)) Setting "fake super = yes" for a module causes the
daemon side to behave as if the bf(--fake-user) command-line option had
been specified. This allows the full attributes of a file to be stored
without having to have the daemon actually running as root.
-dit(bf(filter)) The "filter" option allows you to specify a space-separated
-list of filter rules that the daemon will not allow to be read or written.
-This is only superficially equivalent to the client specifying these
-patterns with the bf(--filter) option. Only one "filter" option may be
-specified, but it may contain as many rules as you like, including
-merge-file rules. Note that per-directory merge-file rules do not provide
-as much protection as global rules, but they can be used to make bf(--delete)
-work better when a client downloads the daemon's files (if the per-dir
-merge files are included in the transfer).
-
-dit(bf(exclude)) The "exclude" option allows you to specify a
-space-separated list of patterns that the daemon will not allow to be read
-or written. This is only superficially equivalent to the client
-specifying these patterns with the bf(--exclude) option. Only one "exclude"
-option may be specified, but you can use "-" and "+" before patterns to
-specify exclude/include.
-
-Because this exclude list is not passed to the client it only applies on
-the daemon: that is, it excludes files received by a client when receiving
-from a daemon and files deleted on a daemon when sending to a daemon, but
-it doesn't exclude files from being deleted on a client when receiving
-from a daemon.
-
-dit(bf(exclude from)) The "exclude from" option specifies a filename
-on the daemon that contains exclude patterns, one per line.
-This is only superficially equivalent
-to the client specifying the bf(--exclude-from) option with an equivalent file.
-See the "exclude" option above.
-
-dit(bf(include)) The "include" option allows you to specify a
-space-separated list of patterns which rsync should not exclude. This is
-only superficially equivalent to the client specifying these patterns with
-the bf(--include) option because it applies only on the daemon. This is
-useful as it allows you to build up quite complex exclude/include rules.
-Only one "include" option may be specified, but you can use "+" and "-"
-before patterns to switch include/exclude. See the "exclude" option
-above.
-
-dit(bf(include from)) The "include from" option specifies a filename
-on the daemon that contains include patterns, one per line. This is
-only superficially equivalent to the client specifying the
-bf(--include-from) option with a equivalent file.
-See the "exclude" option above.
-
-dit(bf(incoming chmod)) This option allows you to specify a set of
+dit(bf(filter)) The daemon has its own filter chain that determines what files
+it will let the client access. This chain is not sent to the client and is
+independent of any filters the client may have specified. Files excluded by
+the daemon filter chain (bf(daemon-excluded) files) are treated as non-existent
+if the client tries to pull them, are skipped with an error message if the
+client tries to push them (triggering exit code 23), and are never deleted from
+the module. You can use daemon filters to prevent clients from downloading or
+tampering with private administrative files, such as files you may add to
+support uid/gid name translations.
+
+The daemon filter chain is built from the "filter", "include from", "include",
+"exclude from", and "exclude" parameters, in that order of priority. Anchored
+patterns are anchored at the root of the module. To prevent access to an
+entire subtree, for example, "/secret", you em(must) exclude everything in the
+subtree; the easiest way to do this is with a triple-star pattern like
+"/secret/***".
+
+The "filter" parameter takes a space-separated list of daemon filter rules,
+though it is smart enough to know not to split a token at an internal space in
+a rule (e.g. "- /foo - /bar" is parsed as two rules). You may specify one or
+more merge-file rules using the normal syntax. Only one "filter" parameter can
+apply to a given module in the config file, so put all the rules you want in a
+single parameter. Note that per-directory merge-file rules do not provide as
+much protection as global rules, but they can be used to make bf(--delete) work
+better during a client download operation if the per-dir merge files are
+included in the transfer and the client requests that they be used.
+
+dit(bf(exclude)) This parameter takes a space-separated list of daemon
+exclude patterns. As with the client bf(--exclude) option, patterns can be
+qualified with "- " or "+ " to explicitly indicate exclude/include. Only one
+"exclude" parameter can apply to a given module. See the "filter" parameter
+for a description of how excluded files affect the daemon.
+
+dit(bf(include)) Use an "include" to override the effects of the "exclude"
+parameter. Only one "include" parameter can apply to a given module. See the
+"filter" parameter for a description of how excluded files affect the daemon.
+
+dit(bf(exclude from)) This parameter specifies the name of a file
+on the daemon that contains daemon exclude patterns, one per line. Only one
+"exclude from" parameter can apply to a given module; if you have multiple
+exclude-from files, you can specify them as a merge file in the "filter"
+parameter. See the "filter" parameter for a description of how excluded files
+affect the daemon.
+
+dit(bf(include from)) Analogue of "exclude from" for a file of daemon include
+patterns. Only one "include from" parameter can apply to a given module. See
+the "filter" parameter for a description of how excluded files affect the
+daemon.
+
+dit(bf(incoming chmod)) This parameter allows you to specify a set of
comma-separated chmod strings that will affect the permissions of all
incoming files (files that are being received by the daemon). These
changes happen after all other permission calculations, and this will
See the description of the bf(--chmod) rsync option and the bf(chmod)(1)
manpage for information on the format of this string.
-dit(bf(outgoing chmod)) This option allows you to specify a set of
+dit(bf(outgoing chmod)) This parameter allows you to specify a set of
comma-separated chmod strings that will affect the permissions of all
outgoing files (files that are being sent out from the daemon). These
changes happen first, making the sent permissions appear to be different
See the description of the bf(--chmod) rsync option and the bf(chmod)(1)
manpage for information on the format of this string.
-dit(bf(auth users)) The "auth users" option specifies a comma and
+dit(bf(auth users)) This parameter specifies a comma and
space-separated list of usernames that will be allowed to connect to
this module. The usernames do not need to exist on the local
system. The usernames may also contain shell wildcard characters. If
username and password to connect to the module. A challenge response
authentication protocol is used for this exchange. The plain text
usernames and passwords are stored in the file specified by the
-"secrets file" option. The default is for all users to be able to
+"secrets file" parameter. The default is for all users to be able to
connect without a password (this is called "anonymous rsync").
See also the "CONNECTING TO AN RSYNC DAEMON OVER A REMOTE SHELL
rsyncd.conf-level username that differs from the remote-shell-level
username when using a remote shell to connect to an rsync daemon.
-dit(bf(secrets file)) The "secrets file" option specifies the name of
+dit(bf(secrets file)) This parameter specifies the name of
a file that contains the username:password pairs used for
authenticating this module. This file is only consulted if the "auth
-users" option is specified. The file is line based and contains
+users" parameter is specified. The file is line based and contains
username:password pairs separated by a single colon. Any line starting
with a hash (#) is considered a comment and is skipped. The passwords
can contain any characters but be warned that many operating systems
limit the length of passwords that can be typed at the client end, so
you may find that passwords longer than 8 characters don't work.
-There is no default for the "secrets file" option, you must choose a name
+There is no default for the "secrets file" parameter, you must choose a name
(such as tt(/etc/rsyncd.secrets)). The file must normally not be readable
by "other"; see "strict modes".
-dit(bf(strict modes)) The "strict modes" option determines whether or not
+dit(bf(strict modes)) This parameter determines whether or not
the permissions on the secrets file will be checked. If "strict modes" is
true, then the secrets file must not be readable by any user ID other
than the one that the rsync daemon is running under. If "strict modes" is
-false, the check is not performed. The default is true. This option
+false, the check is not performed. The default is true. This parameter
was added to accommodate rsync running on the Windows operating system.
-dit(bf(hosts allow)) The "hosts allow" option allows you to specify a
+dit(bf(hosts allow)) This parameter allows you to specify a
list of patterns that are matched against a connecting clients
hostname and IP address. If none of the patterns match then the
connection is rejected.
addresses which match the masked IP address will be allowed in.
it() a hostname. The hostname as determined by a reverse lookup will
be matched (case insensitive) against the pattern. Only an exact
- match is allowed in.
+ match is allowed in. This only works if "reverse lookup" is enabled
+ (the default).
it() a hostname pattern using wildcards. These are matched using the
same rules as normal unix filename matching. If the pattern matches
then the client is allowed in.
)
You can also combine "hosts allow" with a separate "hosts deny"
-option. If both options are specified then the "hosts allow" option s
+parameter. If both parameters are specified then the "hosts allow" parameter is
checked first and a match results in the client being able to
-connect. The "hosts deny" option is then checked and a match means
+connect. The "hosts deny" parameter is then checked and a match means
that the host is rejected. If the host does not match either the
"hosts allow" or the "hosts deny" patterns then it is allowed to
connect.
-The default is no "hosts allow" option, which means all hosts can connect.
+The default is no "hosts allow" parameter, which means all hosts can connect.
-dit(bf(hosts deny)) The "hosts deny" option allows you to specify a
+dit(bf(hosts deny)) This parameter allows you to specify a
list of patterns that are matched against a connecting clients
hostname and IP address. If the pattern matches then the connection is
-rejected. See the "hosts allow" option for more information.
+rejected. See the "hosts allow" parameter for more information.
+
+The default is no "hosts deny" parameter, which means all hosts can connect.
+
+dit(bf(reverse lookup)) Controls whether the daemon performs a reverse lookup
+on the client's IP address to determine its hostname, which is used for
+"hosts allow"/"hosts deny" checks and the "%h" log escape. This is enabled by
+default, but you may wish to disable it to save time if you know the lookup will
+not return a useful result, in which case the daemon will use the name
+"UNDETERMINED" instead.
-The default is no "hosts deny" option, which means all hosts can connect.
+If this parameter is enabled globally (even by default), rsync performs the
+lookup as soon as a client connects, so disabling it for a module will not
+avoid the lookup. Thus, you probably want to disable it globally and then
+enable it for modules that need the information.
-dit(bf(ignore errors)) The "ignore errors" option tells rsyncd to
+dit(bf(ignore errors)) This parameter tells rsyncd to
ignore I/O errors on the daemon when deciding whether to run the delete
phase of the transfer. Normally rsync skips the bf(--delete) step if any
I/O errors have occurred in order to prevent disastrous deletion due
to a temporary resource shortage or other I/O error. In some cases this
-test is counter productive so you can use this option to turn off this
+test is counter productive so you can use this parameter to turn off this
behavior.
dit(bf(ignore nonreadable)) This tells the rsync daemon to completely
public archives that may have some non-readable files among the
directories, and the sysadmin doesn't want those files to be seen at all.
-dit(bf(transfer logging)) The "transfer logging" option enables per-file
+dit(bf(transfer logging)) This parameter enables per-file
logging of downloads and uploads in a format somewhat similar to that
used by ftp daemons. The daemon always logs the transfer at the end, so
if a transfer is aborted, no mention will be made in the log file.
-If you want to customize the log lines, see the "log format" option.
+If you want to customize the log lines, see the "log format" parameter.
-dit(bf(log format)) The "log format" option allows you to specify the
+dit(bf(log format)) This parameter allows you to specify the
format used for logging file transfers when transfer logging is enabled.
The format is a text string containing embedded single-character escape
sequences prefixed with a percent (%) character. An optional numeric
field width may also be specified between the percent and the escape
letter (e.g. "bf(%-50n %8l %07p)").
+In addition, one or more apostrophes may be specified prior to a numerical
+escape to indicate that the numerical value should be made more human-readable.
+The 3 supported levels are the same as for the bf(--human-readable)
+command-line option, though the default is for human-readability to be off.
+Each added apostrophe increases the level (e.g. "bf(%''l %'b %f)").
The default log format is "%o %h [%a] %m (%u) %f %l", and a "%t [%p] "
-is always prefixed when using the "log file" option.
+is always prefixed when using the "log file" parameter.
(A perl script that will summarize this default log format is included
in the rsync source code distribution in the "support" subdirectory:
rsyncstats.)
it() %a the remote IP address
it() %b the number of bytes actually transferred
it() %B the permission bits of the file (e.g. rwxrwxrwt)
- it() %c the checksum bytes received for this file (only when sending)
+ it() %c the total size of the block checksums received for the basis file (only when sending)
+ it() %C the full-file MD5 checksum if bf(--checksum) is enabled or a file was transferred (only for protocol 30 or above).
it() %f the filename (long form on sender; no trailing "/")
it() %G the gid of the file (decimal) or "DEFAULT"
it() %h the remote host name
rsync versions. For instance, deleted files were only output as verbose
messages prior to rsync 2.6.4.
-dit(bf(timeout)) The "timeout" option allows you to override the
-clients choice for I/O timeout for this module. Using this option you
+dit(bf(timeout)) This parameter allows you to override the
+clients choice for I/O timeout for this module. Using this parameter you
can ensure that rsync won't wait on a dead client forever. The timeout
is specified in seconds. A value of zero means no timeout and is the
default. A good choice for anonymous rsync daemons may be 600 (giving
a 10 minute timeout).
-dit(bf(refuse options)) The "refuse options" option allows you to
+dit(bf(refuse options)) This parameter allows you to
specify a space-separated list of rsync command line options that will
be refused by your rsync daemon.
You may specify the full option name, its one-letter abbreviation, or a
The reason the above refuses all delete options is that the options imply
bf(--delete), and implied options are refused just like explicit options.
As an additional safety feature, the refusal of "delete" also refuses
-bf(remove-sent-files) when the daemon is the sender; if you want the latter
+bf(remove-source-files) when the daemon is the sender; if you want the latter
without the former, instead refuse "delete-*" -- that refuses all the
-delete modes without affecting bf(--remove-sent-files).
+delete modes without affecting bf(--remove-source-files).
When an option is refused, the daemon prints an error message and exits.
To prevent all compression when serving files,
instead of "refuse options = compress" to avoid returning an error to a
client that requests compression.
-dit(bf(dont compress)) The "dont compress" option allows you to select
+dit(bf(dont compress)) This parameter allows you to select
filenames based on wildcard patterns that should not be compressed
-when pulling files from the daemon (no analogous option exists to
+when pulling files from the daemon (no analogous parameter exists to
govern the pushing of files to a daemon).
Compression is expensive in terms of CPU usage, so it
is usually good to not try to compress files that won't compress well,
such as already compressed files.
-The "dont compress" option takes a space-separated list of
+The "dont compress" parameter takes a space-separated list of
case-insensitive wildcard patterns. Any source filename matching one
of the patterns will not be compressed during transfer.
-See the bf(--skip-compress) option in the bf(rsync)(1) manpage for the list
+See the bf(--skip-compress) parameter in the bf(rsync)(1) manpage for the list
of file suffixes that are not compressed by default. Specifying a value
-for the bf(dont compress) option changes the default when the daemon is
+for the "dont compress" parameter changes the default when the daemon is
the sender.
dit(bf(pre-xfer exec), bf(post-xfer exec)) You may specify a command to be run
enddit()
+manpagesection(CONFIG DIRECTIVES)
+
+There are currently two config directives available that allow a config file to
+incorporate the contents of other files: bf(&include) and bf(&merge). Both
+allow a reference to either a file or a directory. They differ in how
+segregated the file's contents are considered to be.
+
+The bf(&include) directive treats each file as more distinct, with each one
+inheriting the defaults of the parent file, starting the parameter parsing
+as globals/defaults, and leaving the defaults unchanged for the parsing of
+the rest of the parent file.
+
+The bf(&merge) directive, on the other hand, treats the file's contents as
+if it were simply inserted in place of the directive, and thus it can set
+parameters in a module started in another file, can affect the defaults for
+other files, etc.
+
+When an bf(&include) or bf(&merge) directive refers to a directory, it will read
+in all the bf(*.conf) files contained inside that directory (without any
+recursive scanning), with the files sorted into alpha order. So, if you have a
+directory named "rsyncd.d" with the files "foo.conf", "bar.conf", and
+"baz.conf" inside it, this directive:
+
+verb( &include /path/rsyncd.d )
+
+would be the same as this set of directives:
+
+verb( &include /path/rsyncd.d/bar.conf
+ &include /path/rsyncd.d/baz.conf
+ &include /path/rsyncd.d/foo.conf )
+
+except that it adjusts as files are added and removed from the directory.
+
+The advantage of the bf(&include) directive is that you can define one or more
+modules in a separate file without worrying about unintended side-effects
+between the self-contained module files. For instance, this is a useful
+/etc/rsyncd.conf file:
+
+verb( port = 873
+ log file = /var/log/rsync.log
+ pid file = /var/lock/rsync.lock
+
+ &include /etc/rsyncd.d )
+
+The advantage of the bf(&merge) directive is that you can load config snippets
+that can be included into multiple module definitions.
+
manpagesection(AUTHENTICATION STRENGTH)
The authentication protocol used in rsync is a 128 bit MD4 based
verb(
uid = nobody
gid = nobody
-use chroot = no
+use chroot = yes
max connections = 4
syslog facility = local5
pid file = /var/run/rsyncd.pid
[ftp]
- path = /var/ftp/pub
+ path = /var/ftp/./pub
comment = whole ftp area (approx 6.1 GB)
[sambaftp]
- path = /var/ftp/pub/samba
+ path = /var/ftp/./pub/samba
comment = Samba ftp area (approx 300 MB)
[rsyncftp]
- path = /var/ftp/pub/rsync
+ path = /var/ftp/./pub/rsync
comment = rsync ftp area (approx 6 MB)
[sambawww]
manpagesection(VERSION)
-This man page is current for version 3.0.0pre9 of rsync.
+This man page is current for version 3.0.3 of rsync.
manpagesection(CREDITS)
Matt McCutchen's Web Site / rsync / rsync.git / blobdiff