Added notifications about error-exit values:
[rsync/rsync.git] / io.c
1 /*
2  * Socket and pipe I/O utilities used in rsync.
3  *
4  * Copyright (C) 1996-2001 Andrew Tridgell
5  * Copyright (C) 1996 Paul Mackerras
6  * Copyright (C) 2001, 2002 Martin Pool <mbp@samba.org>
7  * Copyright (C) 2003-2009 Wayne Davison
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License as published by
11  * the Free Software Foundation; either version 3 of the License, or
12  * (at your option) any later version.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  * GNU General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License along
20  * with this program; if not, visit the http://fsf.org website.
21  */
22
23 /* Rsync provides its own multiplexing system, which is used to send
24  * stderr and stdout over a single socket.
25  *
26  * For historical reasons this is off during the start of the
27  * connection, but it's switched on quite early using
28  * io_start_multiplex_out() and io_start_multiplex_in(). */
29
30 #include "rsync.h"
31 #include "ifuncs.h"
32 #include "inums.h"
33
34 /** If no timeout is specified then use a 60 second select timeout */
35 #define SELECT_TIMEOUT 60
36
37 extern int bwlimit;
38 extern size_t bwlimit_writemax;
39 extern int io_timeout;
40 extern int am_server;
41 extern int am_daemon;
42 extern int am_sender;
43 extern int am_generator;
44 extern int msgs2stderr;
45 extern int inc_recurse;
46 extern int io_error;
47 extern int eol_nulls;
48 extern int flist_eof;
49 extern int file_total;
50 extern int file_old_total;
51 extern int list_only;
52 extern int read_batch;
53 extern int protect_args;
54 extern int checksum_seed;
55 extern int protocol_version;
56 extern int remove_source_files;
57 extern int preserve_hard_links;
58 extern BOOL extra_flist_sending_enabled;
59 extern struct stats stats;
60 extern struct file_list *cur_flist;
61 #ifdef ICONV_OPTION
62 extern int filesfrom_convert;
63 extern iconv_t ic_send, ic_recv;
64 #endif
65
66 int csum_length = SHORT_SUM_LENGTH; /* initial value */
67 int allowed_lull = 0;
68 int ignore_timeout = 0;
69 int batch_fd = -1;
70 int msgdone_cnt = 0;
71 int forward_flist_data = 0;
72
73 /* Ignore an EOF error if non-zero. See whine_about_eof(). */
74 int kluge_around_eof = 0;
75
76 int sock_f_in = -1;
77 int sock_f_out = -1;
78
79 int64 total_data_read = 0;
80 int64 total_data_written = 0;
81
82 static struct {
83         xbuf in, out, msg;
84         int in_fd;
85         int out_fd; /* Both "out" and "msg" go to this fd. */
86         BOOL in_multiplexed;
87         unsigned out_empty_len;
88         size_t raw_data_header_pos;      /* in the out xbuf */
89         size_t raw_flushing_ends_before; /* in the out xbuf */
90         size_t raw_input_ends_before;    /* in the in xbuf */
91 } iobuf = { .in_fd = -1, .out_fd = -1 };
92
93 static time_t last_io_in;
94 static time_t last_io_out;
95
96 static int write_batch_monitor_in = -1;
97 static int write_batch_monitor_out = -1;
98
99 static int ff_forward_fd = -1;
100 static int ff_reenable_multiplex = -1;
101 static char ff_lastchar = '\0';
102 static xbuf ff_xb = EMPTY_XBUF;
103 #ifdef ICONV_OPTION
104 static xbuf iconv_buf = EMPTY_XBUF;
105 #endif
106 static int select_timeout = SELECT_TIMEOUT;
107 static int active_filecnt = 0;
108 static OFF_T active_bytecnt = 0;
109 static int first_message = 1;
110
111 static char int_byte_extra[64] = {
112         0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* (00 - 3F)/4 */
113         0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* (40 - 7F)/4 */
114         1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* (80 - BF)/4 */
115         2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 5, 6, /* (C0 - FF)/4 */
116 };
117
118 #define IN_MULTIPLEXED (iobuf.in_multiplexed)
119 #define OUT_MULTIPLEXED (iobuf.out_empty_len != 0)
120
121 #define PIO_NEED_INPUT (1<<0) /* The *_NEED_* flags are mutually exclusive. */
122 #define PIO_NEED_OUTROOM (1<<1)
123 #define PIO_NEED_MSGROOM (1<<2)
124
125 #define PIO_CONSUME_INPUT (1<<4) /* Must becombined with PIO_NEED_INPUT. */
126
127 #define PIO_INPUT_AND_CONSUME (PIO_NEED_INPUT | PIO_CONSUME_INPUT)
128 #define PIO_NEED_FLAGS (PIO_NEED_INPUT | PIO_NEED_OUTROOM | PIO_NEED_MSGROOM)
129
130 #define REMOTE_OPTION_ERROR "rsync: on remote machine: -"
131 #define REMOTE_OPTION_ERROR2 ": unknown option"
132
133 #define FILESFROM_BUFLEN 2048
134
135 enum festatus { FES_SUCCESS, FES_REDO, FES_NO_SEND };
136
137 static flist_ndx_list redo_list, hlink_list;
138
139 static void sleep_for_bwlimit(int bytes_written);
140
141 static void check_timeout(void)
142 {
143         time_t t;
144
145         if (!io_timeout || ignore_timeout)
146                 return;
147
148         if (!last_io_in) {
149                 last_io_in = time(NULL);
150                 return;
151         }
152
153         t = time(NULL);
154
155         if (t - last_io_in >= io_timeout) {
156                 if (!am_server && !am_daemon) {
157                         rprintf(FERROR, "io timeout after %d seconds -- exiting\n",
158                                 (int)(t-last_io_in));
159                 }
160                 exit_cleanup(RERR_TIMEOUT);
161         }
162 }
163
164 /* It's almost always an error to get an EOF when we're trying to read from the
165  * network, because the protocol is (for the most part) self-terminating.
166  *
167  * There is one case for the receiver when it is at the end of the transfer
168  * (hanging around reading any keep-alive packets that might come its way): if
169  * the sender dies before the generator's kill-signal comes through, we can end
170  * up here needing to loop until the kill-signal arrives.  In this situation,
171  * kluge_around_eof will be < 0.
172  *
173  * There is another case for older protocol versions (< 24) where the module
174  * listing was not terminated, so we must ignore an EOF error in that case and
175  * exit.  In this situation, kluge_around_eof will be > 0. */
176 static NORETURN void whine_about_eof(int fd)
177 {
178         if (kluge_around_eof && fd == sock_f_in) {
179                 int i;
180                 if (kluge_around_eof > 0)
181                         exit_cleanup(0);
182                 /* If we're still here after 10 seconds, exit with an error. */
183                 for (i = 10*1000/20; i--; )
184                         msleep(20);
185         }
186
187         rprintf(FERROR, RSYNC_NAME ": connection unexpectedly closed "
188                 "(%s bytes received so far) [%s]\n",
189                 big_num(stats.total_read), who_am_i());
190
191         exit_cleanup(RERR_STREAMIO);
192 }
193
194 /* Do a safe read, handling any needed looping and error handling.
195  * Returns the count of the bytes read, which will only be different
196  * from "len" if we encountered an EOF.  This routine is not used on
197  * the socket except very early in the transfer. */
198 static size_t safe_read(int fd, char *buf, size_t len)
199 {
200         size_t got;
201         int n;
202
203         assert(fd != iobuf.in_fd);
204
205         n = read(fd, buf, len);
206         if ((size_t)n == len || n == 0) {
207                 if (DEBUG_GTE(IO, 2))
208                         rprintf(FINFO, "[%s] safe_read(%d)=%ld\n", who_am_i(), fd, (long)n);
209                 return n;
210         }
211         if (n < 0) {
212                 if (errno != EINTR && errno != EWOULDBLOCK && errno != EAGAIN) {
213                   read_failed:
214                         rsyserr(FERROR, errno, "safe_read failed to read %ld bytes [%s]",
215                                 (long)len, who_am_i());
216                         exit_cleanup(RERR_STREAMIO);
217                 }
218                 got = 0;
219         } else
220                 got = n;
221
222         while (1) {
223                 struct timeval tv;
224                 fd_set r_fds, e_fds;
225                 int cnt;
226
227                 FD_ZERO(&r_fds);
228                 FD_SET(fd, &r_fds);
229                 FD_ZERO(&e_fds);
230                 FD_SET(fd, &e_fds);
231                 tv.tv_sec = select_timeout;
232                 tv.tv_usec = 0;
233
234                 cnt = select(fd+1, &r_fds, NULL, &e_fds, &tv);
235                 if (cnt <= 0) {
236                         if (cnt < 0 && errno == EBADF) {
237                                 rsyserr(FERROR, errno, "safe_read select failed [%s]",
238                                         who_am_i());
239                                 exit_cleanup(RERR_FILEIO);
240                         }
241                         check_timeout();
242                         continue;
243                 }
244
245                 /*if (FD_ISSET(fd, &e_fds))
246                         rprintf(FINFO, "select exception on fd %d\n", fd); */
247
248                 if (FD_ISSET(fd, &r_fds)) {
249                         n = read(fd, buf + got, len - got);
250                         if (DEBUG_GTE(IO, 2))
251                                 rprintf(FINFO, "[%s] safe_read(%d)=%ld\n", who_am_i(), fd, (long)n);
252                         if (n == 0)
253                                 break;
254                         if (n < 0) {
255                                 if (errno == EINTR)
256                                         continue;
257                                 goto read_failed;
258                         }
259                         if ((got += (size_t)n) == len)
260                                 break;
261                 }
262         }
263
264         return got;
265 }
266
267 static const char *what_fd_is(int fd)
268 {
269         static char buf[20];
270
271         if (fd == sock_f_out)
272                 return "socket";
273         else if (fd == iobuf.out_fd)
274                 return "message fd";
275         else if (fd == batch_fd)
276                 return "batch file";
277         else {
278                 snprintf(buf, sizeof buf, "fd %d", fd);
279                 return buf;
280         }
281 }
282
283 /* Do a safe write, handling any needed looping and error handling.
284  * Returns only if everything was successfully written.  This routine
285  * is not used on the socket except very early in the transfer. */
286 static void safe_write(int fd, const char *buf, size_t len)
287 {
288         int n;
289
290         assert(fd != iobuf.out_fd);
291
292         n = write(fd, buf, len);
293         if ((size_t)n == len)
294                 return;
295         if (n < 0) {
296                 if (errno != EINTR && errno != EWOULDBLOCK && errno != EAGAIN) {
297                   write_failed:
298                         rsyserr(FERROR, errno,
299                                 "safe_write failed to write %ld bytes to %s [%s]",
300                                 (long)len, what_fd_is(fd), who_am_i());
301                         exit_cleanup(RERR_STREAMIO);
302                 }
303         } else {
304                 buf += n;
305                 len -= n;
306         }
307
308         while (len) {
309                 struct timeval tv;
310                 fd_set w_fds;
311                 int cnt;
312
313                 FD_ZERO(&w_fds);
314                 FD_SET(fd, &w_fds);
315                 tv.tv_sec = select_timeout;
316                 tv.tv_usec = 0;
317
318                 cnt = select(fd + 1, NULL, &w_fds, NULL, &tv);
319                 if (cnt <= 0) {
320                         if (cnt < 0 && errno == EBADF) {
321                                 rsyserr(FERROR, errno, "safe_write select failed on %s [%s]",
322                                         what_fd_is(fd), who_am_i());
323                                 exit_cleanup(RERR_FILEIO);
324                         }
325                         check_timeout();
326                         continue;
327                 }
328
329                 if (FD_ISSET(fd, &w_fds)) {
330                         n = write(fd, buf, len);
331                         if (n < 0) {
332                                 if (errno == EINTR)
333                                         continue;
334                                 goto write_failed;
335                         }
336                         buf += n;
337                         len -= n;
338                 }
339         }
340 }
341
342 /* This is only called when files-from data is known to be available.  We read
343  * a chunk of data and put it into the output buffer. */
344 static void forward_filesfrom_data(void)
345 {
346         int len;
347
348         len = read(ff_forward_fd, ff_xb.buf + ff_xb.len, ff_xb.size - ff_xb.len);
349         if (len <= 0) {
350                 if (len == 0 || errno != EINTR) {
351                         /* Send end-of-file marker */
352                         ff_forward_fd = -1;
353                         write_buf(iobuf.out_fd, "\0\0", ff_lastchar ? 2 : 1);
354                         free_xbuf(&ff_xb);
355                         if (ff_reenable_multiplex >= 0)
356                                 io_start_multiplex_out(ff_reenable_multiplex);
357                 }
358                 return;
359         }
360
361         if (DEBUG_GTE(IO, 2))
362                 rprintf(FINFO, "[%s] files-from read=%ld\n", who_am_i(), (long)len);
363
364 #ifdef ICONV_OPTION
365         len += ff_xb.len;
366 #endif
367
368         if (!eol_nulls) {
369                 char *s = ff_xb.buf + len;
370                 /* Transform CR and/or LF into '\0' */
371                 while (s-- > ff_xb.buf) {
372                         if (*s == '\n' || *s == '\r')
373                                 *s = '\0';
374                 }
375         }
376
377         if (ff_lastchar)
378                 ff_xb.pos = 0;
379         else {
380                 char *s = ff_xb.buf;
381                 /* Last buf ended with a '\0', so don't let this buf start with one. */
382                 while (len && *s == '\0')
383                         s++, len--;
384                 ff_xb.pos = s - ff_xb.buf;
385         }
386
387 #ifdef ICONV_OPTION
388         if (filesfrom_convert && len) {
389                 char *sob = ff_xb.buf + ff_xb.pos, *s = sob;
390                 char *eob = sob + len;
391                 int flags = ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_CIRCULAR_OUT;
392                 if (ff_lastchar == '\0')
393                         flags |= ICB_INIT;
394                 /* Convert/send each null-terminated string separately, skipping empties. */
395                 while (s != eob) {
396                         if (*s++ == '\0') {
397                                 ff_xb.len = s - sob - 1;
398                                 if (iconvbufs(ic_send, &ff_xb, &iobuf.out, flags) < 0)
399                                         exit_cleanup(RERR_PROTOCOL); /* impossible? */
400                                 write_buf(iobuf.out_fd, s-1, 1); /* Send the '\0'. */
401                                 while (s != eob && *s == '\0')
402                                         s++;
403                                 sob = s;
404                                 ff_xb.pos = sob - ff_xb.buf;
405                                 flags |= ICB_INIT;
406                         }
407                 }
408
409                 if ((ff_xb.len = s - sob) == 0)
410                         ff_lastchar = '\0';
411                 else {
412                         /* Handle a partial string specially, saving any incomplete chars. */
413                         flags &= ~ICB_INCLUDE_INCOMPLETE;
414                         if (iconvbufs(ic_send, &ff_xb, &iobuf.out, flags) < 0) {
415                                 if (errno == E2BIG)
416                                         exit_cleanup(RERR_PROTOCOL); /* impossible? */
417                                 if (ff_xb.pos)
418                                         memmove(ff_xb.buf, ff_xb.buf + ff_xb.pos, ff_xb.len);
419                         }
420                         ff_lastchar = 'x'; /* Anything non-zero. */
421                 }
422         } else
423 #endif
424
425         if (len) {
426                 char *f = ff_xb.buf + ff_xb.pos;
427                 char *t = ff_xb.buf;
428                 char *eob = f + len;
429                 /* Eliminate any multi-'\0' runs. */
430                 while (f != eob) {
431                         if (!(*t++ = *f++)) {
432                                 while (f != eob && *f == '\0')
433                                         f++;
434                         }
435                 }
436                 ff_lastchar = f[-1];
437                 if ((len = t - ff_xb.buf) != 0) {
438                         /* This will not circle back to perform_io() because we only get
439                          * called when there is plenty of room in the output buffer. */
440                         write_buf(iobuf.out_fd, ff_xb.buf, len);
441                 }
442         }
443 }
444
445 /* Perform buffered input and output until specified conditions are met.  When
446  * given a "needed" read requirement, we'll return without doing any I/O if the
447  * iobuf.in bytes are already available.  When reading, we'll read as many
448  * bytes as we can into the buffer, and return as soon as we meet the minimum
449  * read requirement.  When given a "needed" write requirement, we'll return
450  * without doing any I/O if that many bytes will fit in the output buffer (we
451  * check either iobuf.out or iobuf.msg, depending on the flags).  When writing,
452  * we write out as much as we can, and return as soon as the given free-space
453  * requirement is available.
454  *
455  * The iobuf.out and iobuf.msg buffers are circular, so some writes into them
456  * will need to be split when the data needs to wrap around to the start.  In
457  * order to help make this easier for some operations (such as the use of
458  * SIVAL() into the buffer) the buffers MUST have 4 bytes of overflow space at
459  * the end that is not not counted in the "size".  The iobuf.in buffer is not
460  * (currently) circular.  To facilitate the handling of MSG_DATA bytes as they
461  * are read-from/written-into the buffers, see the three raw_* iobuf vars.
462  *
463  * When writing, we flush data in the following priority order:
464  *
465  * 1. Finish writing any in-progress MSG_DATA sequence from iobuf.out.
466  *
467  * 2. Write out all the messages from the message buf (if iobuf.msg is active).
468  *    Yes, this means that a PIO_NEED_OUTROOM call will completely flush any
469  *    messages before getting to the iobuf.out flushing (except for rule 1).
470  *
471  * 3. Write out the raw data from iobuf.out, possibly filling in the multiplexed
472  *    MSG_DATA header that was pre-allocated (when output is multiplexed).
473  *
474  * TODO:  items for possible future work:
475  *
476  *    - Make this routine able to read the generator-to-receiver batch flow?
477  *
478  *    - Make the input buffer circular?
479  *
480  * Unlike the old routines that this replaces, it is OK to read ahead as far as
481  * we can because the read_a_msg() routine now reads its bytes out of the input
482  * buffer.  In the old days, only raw data was in the input buffer, and any
483  * unused raw data in the buf would prevent the reading of socket data. */
484 static char *perform_io(size_t needed, int flags)
485 {
486         fd_set r_fds, e_fds, w_fds;
487         struct timeval tv;
488         int cnt, max_fd;
489         size_t empty_buf_len = 0;
490         xbuf *out;
491         char *data;
492
493         if (iobuf.in.len == 0 && iobuf.in.pos != 0) {
494                 if (iobuf.raw_input_ends_before)
495                         iobuf.raw_input_ends_before -= iobuf.in.pos;
496                 iobuf.in.pos = 0;
497         }
498
499         switch (flags & PIO_NEED_FLAGS) {
500         case PIO_NEED_INPUT:
501                 if (DEBUG_GTE(IO, 3)) {
502                         rprintf(FINFO, "[%s] perform_io(%ld, %sinput)\n",
503                                 who_am_i(), (long)needed, flags & PIO_CONSUME_INPUT ? "consume&" : "");
504                 }
505
506                 /* Make sure the input buffer is big enough to hold "needed" bytes.
507                  * Also make sure it will fit in the free space at the end, or
508                  * else we need to shift some bytes. */
509                 if (needed && iobuf.in.size < needed) {
510                         if (!(iobuf.in.buf = realloc_array(iobuf.in.buf, char, needed)))
511                                 out_of_memory("perform_io");
512                         if (DEBUG_GTE(IO, 4)) {
513                                 rprintf(FINFO, "[%s] resized input buffer from %ld to %ld bytes.\n",
514                                         who_am_i(), (long)iobuf.in.size, (long)needed);
515                         }
516                         iobuf.in.size = needed;
517                 }
518                 if (iobuf.in.size - iobuf.in.pos < needed
519                  || (iobuf.in.len < needed && iobuf.in.len < 1024
520                   && iobuf.in.size - (iobuf.in.pos + iobuf.in.len) < 1024)) {
521                         memmove(iobuf.in.buf, iobuf.in.buf + iobuf.in.pos, iobuf.in.len);
522                         if (DEBUG_GTE(IO, 4)) {
523                                 rprintf(FINFO,
524                                         "[%s] moved %ld bytes from %ld to 0 in the input buffer (size=%ld, needed=%ld).\n",
525                                         who_am_i(), (long)iobuf.in.len, (long)iobuf.in.pos, (long)iobuf.in.size, (long)needed);
526                         }
527                         if (iobuf.raw_input_ends_before)
528                                 iobuf.raw_input_ends_before -= iobuf.in.pos;
529                         iobuf.in.pos = 0;
530                 }
531                 break;
532
533         case PIO_NEED_OUTROOM:
534                 /* We never resize the circular output buffer. */
535                 if (iobuf.out.size - iobuf.out_empty_len < needed) {
536                         fprintf(stderr, "need to write %ld bytes, iobuf.out.buf is only %ld bytes.\n",
537                                 (long)needed, (long)(iobuf.out.size - iobuf.out_empty_len));
538                         exit_cleanup(RERR_PROTOCOL);
539                 }
540
541                 if (DEBUG_GTE(IO, 3)) {
542                         rprintf(FINFO, "[%s] perform_io(%ld, outroom) needs to flush %ld\n",
543                                 who_am_i(), (long)needed,
544                                 iobuf.out.len > iobuf.out.size - needed
545                                 ? (long)iobuf.out.len - (iobuf.out.size - needed) : 0L);
546                 }
547                 break;
548
549         case PIO_NEED_MSGROOM:
550                 /* We never resize the circular message buffer. */
551                 if (iobuf.msg.size < needed) {
552                         fprintf(stderr, "need to write %ld bytes, iobuf.msg.buf is only %ld bytes.\n",
553                                 (long)needed, (long)iobuf.msg.size);
554                         exit_cleanup(RERR_PROTOCOL);
555                 }
556
557                 if (DEBUG_GTE(IO, 3)) {
558                         rprintf(FINFO, "[%s] perform_io(%ld, msgroom) needs to flush %ld\n",
559                                 who_am_i(), (long)needed,
560                                 iobuf.out.len > iobuf.msg.size - needed
561                                 ? (long)iobuf.out.len - (iobuf.msg.size - needed) : 0L);
562                 }
563                 break;
564
565         case 0:
566                 if (DEBUG_GTE(IO, 3))
567                         rprintf(FINFO, "[%s] perform_io(%ld, %d)\n", who_am_i(), (long)needed, flags);
568                 break;
569
570         default:
571                 exit_cleanup(RERR_UNSUPPORTED);
572         }
573
574         while (1) {
575                 switch (flags & PIO_NEED_FLAGS) {
576                 case PIO_NEED_INPUT:
577                         if (iobuf.in.len >= needed)
578                                 goto double_break;
579                         break;
580                 case PIO_NEED_OUTROOM:
581                         if (iobuf.out.len <= iobuf.out.size - needed)
582                                 goto double_break;
583                         break;
584                 case PIO_NEED_MSGROOM:
585                         if (iobuf.msg.len <= iobuf.msg.size - needed)
586                                 goto double_break;
587                         break;
588                 }
589
590                 max_fd = -1;
591
592                 FD_ZERO(&r_fds);
593                 FD_ZERO(&e_fds);
594                 if (iobuf.in_fd >= 0 && iobuf.in.size - (iobuf.in.pos + iobuf.in.len)) {
595                         if (!read_batch || batch_fd >= 0) {
596                                 FD_SET(iobuf.in_fd, &r_fds);
597                                 FD_SET(iobuf.in_fd, &e_fds);
598                         }
599                         if (iobuf.in_fd > max_fd)
600                                 max_fd = iobuf.in_fd;
601                 }
602
603                 /* Only do more filesfrom processing if there is enough room in the out buffer. */
604                 if (ff_forward_fd >= 0 && iobuf.out.size - iobuf.out.len > FILESFROM_BUFLEN*2) {
605                         FD_SET(ff_forward_fd, &r_fds);
606                         if (ff_forward_fd > max_fd)
607                                 max_fd = ff_forward_fd;
608                 }
609
610                 FD_ZERO(&w_fds);
611                 if (iobuf.out_fd >= 0) {
612                         if (iobuf.raw_flushing_ends_before
613                          || (!iobuf.msg.len && iobuf.out.len > iobuf.out_empty_len && !(flags & PIO_NEED_MSGROOM))) {
614                                 if (OUT_MULTIPLEXED && !iobuf.raw_flushing_ends_before) {
615                                         size_t val;
616
617                                         /* The iobuf.raw_flushing_ends_before value can point off the end
618                                          * of the iobuf.out buffer for a while, for easier subtracting. */
619                                         iobuf.raw_flushing_ends_before = iobuf.out.pos + iobuf.out.len;
620
621                                         SIVAL(iobuf.out.buf + iobuf.raw_data_header_pos, 0,
622                                               ((MPLEX_BASE + (int)MSG_DATA)<<24) + iobuf.out.len - 4);
623                                         if ((val = iobuf.out.size - iobuf.raw_data_header_pos) < 4) {
624                                                 /* We used some of the overflow bytes, so move them. */
625                                                 if (DEBUG_GTE(IO, 4)) {
626                                                         rprintf(FINFO, "[%s] wrap-bytes moved: %d (perform_io)\n",
627                                                                 who_am_i(), (int)val);
628                                                 }
629                                                 memcpy(iobuf.out.buf, iobuf.out.buf + iobuf.out.size, 4 - val);
630                                         }
631
632                                         if (DEBUG_GTE(IO, 1)) {
633                                                 rprintf(FINFO, "[%s] send_msg(%d, %ld)\n",
634                                                         who_am_i(), (int)MSG_DATA, (long)iobuf.out.len - 4);
635                                         }
636
637                                         /* reserve room for the next MSG_DATA header */
638                                         iobuf.raw_data_header_pos = iobuf.raw_flushing_ends_before;
639                                         if (iobuf.raw_data_header_pos >= iobuf.out.size)
640                                                 iobuf.raw_data_header_pos -= iobuf.out.size;
641                                         iobuf.out.len += 4;
642                                 }
643
644                                 empty_buf_len = iobuf.out_empty_len;
645                                 out = &iobuf.out;
646                         } else if (iobuf.msg.len) {
647                                 empty_buf_len = 0;
648                                 out = &iobuf.msg;
649                         } else
650                                 out = NULL;
651                         if (out) {
652                                 FD_SET(iobuf.out_fd, &w_fds);
653                                 if (iobuf.out_fd > max_fd)
654                                         max_fd = iobuf.out_fd;
655                         }
656                 } else
657                         out = NULL;
658
659                 if (max_fd < 0) {
660                         switch (flags & PIO_NEED_FLAGS) {
661                         case PIO_NEED_INPUT:
662                                 rprintf(FERROR, "error in perform_io: no fd for input.\n");
663                                 exit_cleanup(RERR_PROTOCOL);
664                         case PIO_NEED_OUTROOM:
665                         case PIO_NEED_MSGROOM:
666                                 msgs2stderr = 1;
667                                 rprintf(FERROR, "error in perform_io: no fd for output.\n");
668                                 exit_cleanup(RERR_PROTOCOL);
669                         default:
670                                 /* No stated needs, so I guess this is OK. */
671                                 break;
672                         }
673                         break;
674                 }
675
676                 if (extra_flist_sending_enabled) {
677                         if (file_total - file_old_total < MAX_FILECNT_LOOKAHEAD
678                          && file_total - file_old_total >= MIN_FILECNT_LOOKAHEAD)
679                                 tv.tv_sec = 0;
680                         else {
681                                 extra_flist_sending_enabled = False;
682                                 tv.tv_sec = select_timeout;
683                         }
684                 } else
685                         tv.tv_sec = select_timeout;
686                 tv.tv_usec = 0;
687
688                 cnt = select(max_fd + 1, &r_fds, &w_fds, &e_fds, &tv);
689
690                 if (cnt <= 0) {
691                         if (cnt < 0 && errno == EBADF) {
692                                 msgs2stderr = 1;
693                                 exit_cleanup(RERR_SOCKETIO);
694                         }
695                         if (extra_flist_sending_enabled) {
696                                 extra_flist_sending_enabled = False;
697                                 send_extra_file_list(sock_f_out, -1);
698                                 extra_flist_sending_enabled = !flist_eof;
699                         } else
700                                 check_timeout();
701                         FD_ZERO(&r_fds); /* Just in case... */
702                         FD_ZERO(&w_fds);
703                 }
704
705                 if (iobuf.in_fd >= 0 && FD_ISSET(iobuf.in_fd, &r_fds)) {
706                         size_t pos = iobuf.in.pos + iobuf.in.len;
707                         size_t len = iobuf.in.size - pos;
708                         int n;
709                         if ((n = read(iobuf.in_fd, iobuf.in.buf + pos, len)) <= 0) {
710                                 if (n == 0) {
711                                         if (!read_batch || batch_fd < 0 || am_generator)
712                                                 whine_about_eof(iobuf.in_fd); /* Doesn't return. */
713                                         batch_fd = -1;
714                                         continue;
715                                 }
716                                 if (errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
717                                         n = 0;
718                                 else {
719                                         /* Don't write errors on a dead socket. */
720                                         if (iobuf.in_fd == sock_f_in) {
721                                                 if (am_sender)
722                                                         msgs2stderr = 1;
723                                                 rsyserr(FERROR_SOCKET, errno, "read error");
724                                         } else
725                                                 rsyserr(FERROR, errno, "read error");
726                                         exit_cleanup(RERR_STREAMIO);
727                                 }
728                         }
729                         if (msgs2stderr && DEBUG_GTE(IO, 2))
730                                 rprintf(FINFO, "[%s] recv=%ld\n", who_am_i(), (long)n);
731
732                         if (io_timeout)
733                                 last_io_in = time(NULL);
734                         stats.total_read += n;
735
736                         iobuf.in.len += n;
737                 }
738
739                 if (iobuf.out_fd >= 0 && FD_ISSET(iobuf.out_fd, &w_fds)) {
740                         size_t len = iobuf.raw_flushing_ends_before ? iobuf.raw_flushing_ends_before - out->pos : out->len;
741                         int n;
742
743                         if (bwlimit_writemax && len > bwlimit_writemax)
744                                 len = bwlimit_writemax;
745
746                         if (out->pos + len > out->size)
747                                 len = out->size - out->pos;
748                         if ((n = write(iobuf.out_fd, out->buf + out->pos, len)) <= 0) {
749                                 if (errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
750                                         n = 0;
751                                 else {
752                                         /* Don't write errors on a dead socket. */
753                                         msgs2stderr = 1;
754                                         out->len = iobuf.raw_flushing_ends_before = out->pos = 0;
755                                         rsyserr(FERROR_SOCKET, errno, "[%s] write error", who_am_i());
756                                         exit_cleanup(RERR_STREAMIO);
757                                 }
758                         }
759                         if (msgs2stderr && DEBUG_GTE(IO, 2)) {
760                                 rprintf(FINFO, "[%s] %s sent=%ld\n",
761                                         who_am_i(), out == &iobuf.out ? "out" : "msg", (long)n);
762                         }
763
764                         if (io_timeout)
765                                 last_io_out = time(NULL);
766                         stats.total_written += n;
767
768                         if (bwlimit_writemax)
769                                 sleep_for_bwlimit(n);
770
771                         if ((out->pos += n) == out->size) {
772                                 if (iobuf.raw_flushing_ends_before)
773                                         iobuf.raw_flushing_ends_before -= out->size;
774                                 out->pos = 0;
775                         }
776                         if (out->pos == iobuf.raw_flushing_ends_before)
777                                 iobuf.raw_flushing_ends_before = 0;
778                         if ((out->len -= n) == empty_buf_len) {
779                                 out->pos = 0;
780                                 if (empty_buf_len)
781                                         iobuf.raw_data_header_pos = 0;
782                         }
783                 }
784
785                 if (ff_forward_fd >= 0 && FD_ISSET(ff_forward_fd, &r_fds)) {
786                         /* This can potentially flush all output and enable
787                          * multiplexed output, so keep this last in the loop
788                          * and be sure to not cache anything that would break
789                          * such a change. */
790                         forward_filesfrom_data();
791                 }
792         }
793   double_break:
794
795         data = iobuf.in.buf + iobuf.in.pos;
796
797         if (flags & PIO_CONSUME_INPUT) {
798                 iobuf.in.len -= needed;
799                 iobuf.in.pos += needed;
800         }
801
802         return data;
803 }
804
805 void noop_io_until_death(void)
806 {
807         char buf[1024];
808
809         kluge_around_eof = 1;
810
811         while (1)
812                 read_buf(iobuf.in_fd, buf, sizeof buf);
813 }
814
815 /* Buffer a message for the multiplexed output stream.  Is never used for MSG_DATA. */
816 int send_msg(enum msgcode code, const char *buf, size_t len, int convert)
817 {
818         char *hdr;
819         size_t pos;
820         BOOL want_debug = DEBUG_GTE(IO, 1) && convert >= 0 && (msgs2stderr || code != MSG_INFO);
821
822         if (!OUT_MULTIPLEXED)
823                 return 0;
824
825         if (want_debug)
826                 rprintf(FINFO, "[%s] send_msg(%d, %ld)\n", who_am_i(), (int)code, (long)len);
827
828 #ifdef ICONV_OPTION
829         if (convert > 0 && ic_send == (iconv_t)-1)
830                 convert = 0;
831         if (convert > 0) {
832                 /* Ensuring double-size room leaves space for a potential conversion. */
833                 if (iobuf.msg.len + len*2 + 4 > iobuf.msg.size)
834                         perform_io(len*2 + 4, PIO_NEED_MSGROOM);
835         } else
836 #endif
837         if (iobuf.msg.len + len + 4 > iobuf.msg.size)
838                 perform_io(len + 4, PIO_NEED_MSGROOM);
839
840         pos = iobuf.msg.pos + iobuf.msg.len; /* Must be set after any flushing. */
841         if (pos >= iobuf.msg.size)
842                 pos -= iobuf.msg.size;
843         hdr = iobuf.msg.buf + pos;
844
845         iobuf.msg.len += 4; /* Leave room for the coming header bytes. */
846
847 #ifdef ICONV_OPTION
848         if (convert > 0) {
849                 xbuf inbuf;
850
851                 INIT_XBUF(inbuf, (char*)buf, len, (size_t)-1);
852
853                 len = iobuf.msg.len;
854                 iconvbufs(ic_send, &inbuf, &iobuf.msg,
855                           ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_CIRCULAR_OUT | ICB_INIT);
856                 if (inbuf.len > 0) {
857                         rprintf(FERROR, "overflowed iobuf.msg buffer in send_msg");
858                         exit_cleanup(RERR_UNSUPPORTED);
859                 }
860                 len = iobuf.msg.len - len;
861         } else
862 #endif
863         {
864                 size_t siz;
865
866                 if ((pos += 4) >= iobuf.msg.size)
867                         pos -= iobuf.msg.size;
868
869                 /* Handle a split copy if we wrap around the end of the circular buffer. */
870                 if (pos >= iobuf.msg.pos && (siz = iobuf.msg.size - pos) < len) {
871                         memcpy(iobuf.msg.buf + pos, buf, siz);
872                         memcpy(iobuf.msg.buf, buf + siz, len - siz);
873                 } else
874                         memcpy(iobuf.msg.buf + pos, buf, len);
875
876                 iobuf.msg.len += len;
877         }
878
879         SIVAL(hdr, 0, ((MPLEX_BASE + (int)code)<<24) + len);
880         /* If the header used any overflow bytes, move them to the start. */
881         if ((pos = hdr+4 - iobuf.msg.buf) > iobuf.msg.size) {
882                 size_t siz = pos - iobuf.msg.size;
883                 if (DEBUG_GTE(IO, 4))
884                         rprintf(FINFO, "[%s] wrap-bytes moved: %d (send_msg)\n", who_am_i(), (int)siz);
885                 memcpy(iobuf.msg.buf, hdr+4 - siz, siz);
886         }
887
888         if (want_debug && convert > 0)
889                 rprintf(FINFO, "[%s] converted msg len=%ld\n", who_am_i(), (long)len);
890
891         return 1;
892 }
893
894 void send_msg_int(enum msgcode code, int num)
895 {
896         char numbuf[4];
897
898         if (DEBUG_GTE(IO, 1))
899                 rprintf(FINFO, "[%s] send_msg_int(%d, %d)\n", who_am_i(), (int)code, num);
900
901         SIVAL(numbuf, 0, num);
902         send_msg(code, numbuf, 4, -1);
903 }
904
905 static void got_flist_entry_status(enum festatus status, int ndx)
906 {
907         struct file_list *flist = flist_for_ndx(ndx, "got_flist_entry_status");
908
909         if (remove_source_files) {
910                 active_filecnt--;
911                 active_bytecnt -= F_LENGTH(flist->files[ndx - flist->ndx_start]);
912         }
913
914         if (inc_recurse)
915                 flist->in_progress--;
916
917         switch (status) {
918         case FES_SUCCESS:
919                 if (remove_source_files)
920                         send_msg_int(MSG_SUCCESS, ndx);
921                 if (preserve_hard_links) {
922                         struct file_struct *file = flist->files[ndx - flist->ndx_start];
923                         if (F_IS_HLINKED(file)) {
924                                 flist_ndx_push(&hlink_list, ndx);
925                                 flist->in_progress++;
926                         }
927                 }
928                 break;
929         case FES_REDO:
930                 if (read_batch) {
931                         if (inc_recurse)
932                                 flist->in_progress++;
933                         break;
934                 }
935                 if (inc_recurse)
936                         flist->to_redo++;
937                 flist_ndx_push(&redo_list, ndx);
938                 break;
939         case FES_NO_SEND:
940                 break;
941         }
942 }
943
944 /* Note the fds used for the main socket (which might really be a pipe
945  * for a local transfer, but we can ignore that). */
946 void io_set_sock_fds(int f_in, int f_out)
947 {
948         sock_f_in = f_in;
949         sock_f_out = f_out;
950 }
951
952 void set_io_timeout(int secs)
953 {
954         io_timeout = secs;
955
956         if (!io_timeout || io_timeout > SELECT_TIMEOUT)
957                 select_timeout = SELECT_TIMEOUT;
958         else
959                 select_timeout = io_timeout;
960
961         allowed_lull = read_batch ? 0 : (io_timeout + 1) / 2;
962 }
963
964 static void check_for_d_option_error(const char *msg)
965 {
966         static char rsync263_opts[] = "BCDHIKLPRSTWabceghlnopqrtuvxz";
967         char *colon;
968         int saw_d = 0;
969
970         if (*msg != 'r'
971          || strncmp(msg, REMOTE_OPTION_ERROR, sizeof REMOTE_OPTION_ERROR - 1) != 0)
972                 return;
973
974         msg += sizeof REMOTE_OPTION_ERROR - 1;
975         if (*msg == '-' || (colon = strchr(msg, ':')) == NULL
976          || strncmp(colon, REMOTE_OPTION_ERROR2, sizeof REMOTE_OPTION_ERROR2 - 1) != 0)
977                 return;
978
979         for ( ; *msg != ':'; msg++) {
980                 if (*msg == 'd')
981                         saw_d = 1;
982                 else if (*msg == 'e')
983                         break;
984                 else if (strchr(rsync263_opts, *msg) == NULL)
985                         return;
986         }
987
988         if (saw_d) {
989                 rprintf(FWARNING,
990                     "*** Try using \"--old-d\" if remote rsync is <= 2.6.3 ***\n");
991         }
992 }
993
994 /* This is used by the generator to limit how many file transfers can
995  * be active at once when --remove-source-files is specified.  Without
996  * this, sender-side deletions were mostly happening at the end. */
997 void increment_active_files(int ndx, int itemizing, enum logcode code)
998 {
999         while (1) {
1000                 /* TODO: tune these limits? */
1001                 int limit = active_bytecnt >= 128*1024 ? 10 : 50;
1002                 if (active_filecnt < limit)
1003                         break;
1004                 check_for_finished_files(itemizing, code, 0);
1005                 if (active_filecnt < limit)
1006                         break;
1007                 wait_for_receiver();
1008         }
1009
1010         active_filecnt++;
1011         active_bytecnt += F_LENGTH(cur_flist->files[ndx - cur_flist->ndx_start]);
1012 }
1013
1014 int get_redo_num(void)
1015 {
1016         return flist_ndx_pop(&redo_list);
1017 }
1018
1019 int get_hlink_num(void)
1020 {
1021         return flist_ndx_pop(&hlink_list);
1022 }
1023
1024 /* When we're the receiver and we have a local --files-from list of names
1025  * that needs to be sent over the socket to the sender, we have to do two
1026  * things at the same time: send the sender a list of what files we're
1027  * processing and read the incoming file+info list from the sender.  We do
1028  * this by making recv_file_list() call forward_filesfrom_data(), which
1029  * will ensure that we forward data to the sender until we get some data
1030  * for recv_file_list() to use. */
1031 void start_filesfrom_forwarding(int fd)
1032 {
1033         if (protocol_version < 31 && OUT_MULTIPLEXED) {
1034                 /* Older protocols send the files-from data w/o packaging
1035                  * it in multiplexed I/O packets, so temporarily switch
1036                  * to buffered I/O to match this behavior. */
1037                 iobuf.msg.pos = iobuf.msg.len = 0; /* Be extra sure no messages go out. */
1038                 ff_reenable_multiplex = io_end_multiplex_out(MPLX_TO_BUFFERED);
1039         }
1040         ff_forward_fd = fd;
1041
1042         alloc_xbuf(&ff_xb, FILESFROM_BUFLEN);
1043 }
1044
1045 /* Read a line into the "buf" buffer. */
1046 int read_line(int fd, char *buf, size_t bufsiz, int flags)
1047 {
1048         char ch, *s, *eob;
1049
1050 #ifdef ICONV_OPTION
1051         if (flags & RL_CONVERT && iconv_buf.size < bufsiz)
1052                 realloc_xbuf(&iconv_buf, bufsiz + 1024);
1053 #endif
1054
1055   start:
1056 #ifdef ICONV_OPTION
1057         s = flags & RL_CONVERT ? iconv_buf.buf : buf;
1058 #else
1059         s = buf;
1060 #endif
1061         eob = s + bufsiz - 1;
1062         while (1) {
1063                 /* We avoid read_byte() for files because files can return an EOF. */
1064                 if (fd == iobuf.in_fd)
1065                         ch = read_byte(fd);
1066                 else if (safe_read(fd, &ch, 1) == 0)
1067                         break;
1068                 if (flags & RL_EOL_NULLS ? ch == '\0' : (ch == '\r' || ch == '\n')) {
1069                         /* Skip empty lines if dumping comments. */
1070                         if (flags & RL_DUMP_COMMENTS && s == buf)
1071                                 continue;
1072                         break;
1073                 }
1074                 if (s < eob)
1075                         *s++ = ch;
1076         }
1077         *s = '\0';
1078
1079         if (flags & RL_DUMP_COMMENTS && (*buf == '#' || *buf == ';'))
1080                 goto start;
1081
1082 #ifdef ICONV_OPTION
1083         if (flags & RL_CONVERT) {
1084                 xbuf outbuf;
1085                 INIT_XBUF(outbuf, buf, 0, bufsiz);
1086                 iconv_buf.pos = 0;
1087                 iconv_buf.len = s - iconv_buf.buf;
1088                 iconvbufs(ic_recv, &iconv_buf, &outbuf,
1089                           ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_INIT);
1090                 outbuf.buf[outbuf.len] = '\0';
1091                 return outbuf.len;
1092         }
1093 #endif
1094
1095         return s - buf;
1096 }
1097
1098 void read_args(int f_in, char *mod_name, char *buf, size_t bufsiz, int rl_nulls,
1099                char ***argv_p, int *argc_p, char **request_p)
1100 {
1101         int maxargs = MAX_ARGS;
1102         int dot_pos = 0;
1103         int argc = 0;
1104         char **argv, *p;
1105         int rl_flags = (rl_nulls ? RL_EOL_NULLS : 0);
1106
1107 #ifdef ICONV_OPTION
1108         rl_flags |= (protect_args && ic_recv != (iconv_t)-1 ? RL_CONVERT : 0);
1109 #endif
1110
1111         if (!(argv = new_array(char *, maxargs)))
1112                 out_of_memory("read_args");
1113         if (mod_name && !protect_args)
1114                 argv[argc++] = "rsyncd";
1115
1116         while (1) {
1117                 if (read_line(f_in, buf, bufsiz, rl_flags) == 0)
1118                         break;
1119
1120                 if (argc == maxargs-1) {
1121                         maxargs += MAX_ARGS;
1122                         if (!(argv = realloc_array(argv, char *, maxargs)))
1123                                 out_of_memory("read_args");
1124                 }
1125
1126                 if (dot_pos) {
1127                         if (request_p) {
1128                                 *request_p = strdup(buf);
1129                                 request_p = NULL;
1130                         }
1131                         if (mod_name)
1132                                 glob_expand_module(mod_name, buf, &argv, &argc, &maxargs);
1133                         else
1134                                 glob_expand(buf, &argv, &argc, &maxargs);
1135                 } else {
1136                         if (!(p = strdup(buf)))
1137                                 out_of_memory("read_args");
1138                         argv[argc++] = p;
1139                         if (*p == '.' && p[1] == '\0')
1140                                 dot_pos = argc;
1141                 }
1142         }
1143         argv[argc] = NULL;
1144
1145         glob_expand(NULL, NULL, NULL, NULL);
1146
1147         *argc_p = argc;
1148         *argv_p = argv;
1149 }
1150
1151 BOOL io_start_buffering_out(int f_out)
1152 {
1153         if (msgs2stderr && DEBUG_GTE(IO, 2))
1154                 rprintf(FINFO, "[%s] io_start_buffering_out(%d)\n", who_am_i(), f_out);
1155
1156         if (OUT_MULTIPLEXED && !iobuf.msg.buf) {
1157                 iobuf.msg.size = IO_BUFFER_SIZE - 4;
1158                 if (!(iobuf.msg.buf = new_array(char, iobuf.msg.size + 4)))
1159                         out_of_memory("io_start_buffering_out");
1160                 iobuf.msg.pos = iobuf.msg.len = 0;
1161         }
1162
1163         if (iobuf.out.buf) {
1164                 if (iobuf.out_fd == -1)
1165                         iobuf.out_fd = f_out;
1166                 assert(f_out == iobuf.out_fd);
1167                 return False;
1168         }
1169
1170         iobuf.out.size = IO_BUFFER_SIZE * 2 - 4;
1171         /* The 4 overflow bytes makes some circular-buffer wrapping operations easier. */
1172         if (!(iobuf.out.buf = new_array(char, iobuf.out.size + 4)))
1173                 out_of_memory("io_start_buffering_out");
1174         iobuf.out.pos = iobuf.out.len = 0;
1175         iobuf.out_fd = f_out;
1176
1177         return True;
1178 }
1179
1180 BOOL io_start_buffering_in(int f_in)
1181 {
1182         if (msgs2stderr && DEBUG_GTE(IO, 2))
1183                 rprintf(FINFO, "[%s] io_start_buffering_in(%d)\n", who_am_i(), f_in);
1184
1185         if (iobuf.in.buf) {
1186                 if (iobuf.in_fd == -1)
1187                         iobuf.in_fd = f_in;
1188                 assert(f_in == iobuf.in_fd);
1189                 return False;
1190         }
1191
1192         iobuf.in.size = IO_BUFFER_SIZE;
1193         if (!(iobuf.in.buf = new_array(char, iobuf.in.size)))
1194                 out_of_memory("io_start_buffering_in");
1195
1196         iobuf.in.pos = iobuf.in.len = 0;
1197
1198         iobuf.in_fd = f_in;
1199
1200         return True;
1201 }
1202
1203 void io_end_buffering_in(BOOL free_buffers)
1204 {
1205         if (msgs2stderr && DEBUG_GTE(IO, 2)) {
1206                 rprintf(FINFO, "[%s] io_end_buffering_in(IOBUF_%s_BUFS)\n",
1207                         who_am_i(), free_buffers ? "FREE" : "KEEP");
1208         }
1209
1210         if (free_buffers)
1211                 free_xbuf(&iobuf.in);
1212         else
1213                 iobuf.in.pos = iobuf.in.len = 0;
1214
1215         iobuf.in_fd = -1;
1216 }
1217
1218 void io_end_buffering_out(BOOL free_buffers)
1219 {
1220         if (msgs2stderr && DEBUG_GTE(IO, 2)) {
1221                 rprintf(FINFO, "[%s] io_end_buffering_out(IOBUF_%s_BUFS)\n",
1222                         who_am_i(), free_buffers ? "FREE" : "KEEP");
1223         }
1224
1225         io_flush(FULL_FLUSH);
1226
1227         if (free_buffers) {
1228                 free_xbuf(&iobuf.out);
1229                 free_xbuf(&iobuf.msg);
1230         }
1231
1232         iobuf.out_fd = -1;
1233 }
1234
1235 void maybe_flush_socket(int important)
1236 {
1237         if (flist_eof && iobuf.out.buf && iobuf.out.len > iobuf.out_empty_len
1238          && (important || time(NULL) - last_io_out >= 5))
1239                 io_flush(NORMAL_FLUSH);
1240 }
1241
1242 void maybe_send_keepalive(void)
1243 {
1244         if (time(NULL) - last_io_out >= allowed_lull) {
1245                 if (!iobuf.msg.len && iobuf.out.len == iobuf.out_empty_len) {
1246                         if (protocol_version < 29)
1247                                 return; /* there's nothing we can do */
1248                         if (protocol_version >= 30)
1249                                 send_msg(MSG_NOOP, "", 0, 0);
1250                         else {
1251                                 write_int(iobuf.out_fd, cur_flist->used);
1252                                 write_shortint(iobuf.out_fd, ITEM_IS_NEW);
1253                         }
1254                 }
1255                 if (iobuf.msg.len)
1256                         perform_io(iobuf.msg.size - iobuf.msg.len + 1, PIO_NEED_MSGROOM);
1257                 else if (iobuf.out.len > iobuf.out_empty_len)
1258                         io_flush(NORMAL_FLUSH);
1259         }
1260 }
1261
1262 void start_flist_forward(int ndx)
1263 {
1264         write_int(iobuf.out_fd, ndx);
1265         forward_flist_data = 1;
1266 }
1267
1268 void stop_flist_forward(void)
1269 {
1270         forward_flist_data = 0;
1271 }
1272
1273 /* Read a message from a multiplexed source. */
1274 static void read_a_msg(void)
1275 {
1276         char *data, line[BIGPATHBUFLEN];
1277         int tag, val;
1278         size_t msg_bytes;
1279
1280         data = perform_io(4, PIO_INPUT_AND_CONSUME);
1281         tag = IVAL(data, 0);
1282
1283         msg_bytes = tag & 0xFFFFFF;
1284         tag = (tag >> 24) - MPLEX_BASE;
1285
1286         if (DEBUG_GTE(IO, 1) && (msgs2stderr || tag != MSG_INFO))
1287                 rprintf(FINFO, "[%s] got msg=%d, len=%ld\n", who_am_i(), (int)tag, (long)msg_bytes);
1288
1289         switch (tag) {
1290         case MSG_DATA:
1291                 assert(iobuf.raw_input_ends_before == 0);
1292                 /* Though this does not yet read the data, we do mark where in
1293                  * the buffer the msg data will end once it is read.  It is
1294                  * possible that this points off the end of the buffer, in
1295                  * which case the gradual reading of the input stream will
1296                  * cause this value to decrease and eventually become real. */
1297                 iobuf.raw_input_ends_before = iobuf.in.pos + msg_bytes;
1298                 break;
1299         case MSG_STATS:
1300                 if (msg_bytes != sizeof stats.total_read || !am_generator)
1301                         goto invalid_msg;
1302                 data = perform_io(sizeof stats.total_read, PIO_INPUT_AND_CONSUME);
1303                 memcpy((char*)&stats.total_read, data, sizeof stats.total_read);
1304                 break;
1305         case MSG_REDO:
1306                 if (msg_bytes != 4 || !am_generator)
1307                         goto invalid_msg;
1308                 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1309                 got_flist_entry_status(FES_REDO, IVAL(data, 0));
1310                 break;
1311         case MSG_IO_ERROR:
1312                 if (msg_bytes != 4 || am_sender)
1313                         goto invalid_msg;
1314                 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1315                 io_error |= IVAL(data, 0);
1316                 if (!am_generator)
1317                         send_msg(MSG_IO_ERROR, data, 4, 0);
1318                 break;
1319         case MSG_IO_TIMEOUT:
1320                 if (msg_bytes != 4 || am_server || am_generator)
1321                         goto invalid_msg;
1322                 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1323                 val = IVAL(data, 0);
1324                 if (!io_timeout || io_timeout > val) {
1325                         if (INFO_GTE(MISC, 2))
1326                                 rprintf(FINFO, "Setting --timeout=%d to match server\n", val);
1327                         io_timeout = val;
1328                 }
1329                 break;
1330         case MSG_NOOP:
1331                 if (am_sender)
1332                         maybe_send_keepalive();
1333                 break;
1334         case MSG_DELETED:
1335                 if (msg_bytes >= sizeof line)
1336                         goto overflow;
1337                 if (am_generator) {
1338                         memcpy(line, perform_io(msg_bytes, PIO_INPUT_AND_CONSUME), msg_bytes);
1339                         send_msg(MSG_DELETED, line, msg_bytes, 1);
1340                         break;
1341                 }
1342 #ifdef ICONV_OPTION
1343                 if (ic_recv != (iconv_t)-1) {
1344                         xbuf outbuf, inbuf;
1345                         char ibuf[512];
1346                         int add_null = 0;
1347                         int flags = ICB_INCLUDE_BAD | ICB_INIT;
1348
1349                         INIT_CONST_XBUF(outbuf, line);
1350                         INIT_XBUF(inbuf, ibuf, 0, (size_t)-1);
1351
1352                         while (msg_bytes) {
1353                                 size_t len = msg_bytes > sizeof ibuf - inbuf.len ? sizeof ibuf - inbuf.len : msg_bytes;
1354                                 memcpy(ibuf + inbuf.len, perform_io(len, PIO_INPUT_AND_CONSUME), len);
1355                                 inbuf.pos = 0;
1356                                 inbuf.len += len;
1357                                 if (!(msg_bytes -= len) && !ibuf[inbuf.len-1])
1358                                         inbuf.len--, add_null = 1;
1359                                 if (iconvbufs(ic_send, &inbuf, &outbuf, flags) < 0) {
1360                                         if (errno == E2BIG)
1361                                                 goto overflow;
1362                                         /* Buffer ended with an incomplete char, so move the
1363                                          * bytes to the start of the buffer and continue. */
1364                                         memmove(ibuf, ibuf + inbuf.pos, inbuf.len);
1365                                 }
1366                                 flags &= ~ICB_INIT;
1367                         }
1368                         if (add_null) {
1369                                 if (outbuf.len == outbuf.size)
1370                                         goto overflow;
1371                                 outbuf.buf[outbuf.len++] = '\0';
1372                         }
1373                         msg_bytes = outbuf.len;
1374                 } else
1375 #endif
1376                         memcpy(line, perform_io(msg_bytes, PIO_INPUT_AND_CONSUME), msg_bytes);
1377                 /* A directory name was sent with the trailing null */
1378                 if (msg_bytes > 0 && !line[msg_bytes-1])
1379                         log_delete(line, S_IFDIR);
1380                 else {
1381                         line[msg_bytes] = '\0';
1382                         log_delete(line, S_IFREG);
1383                 }
1384                 break;
1385         case MSG_SUCCESS:
1386                 if (msg_bytes != 4) {
1387                   invalid_msg:
1388                         rprintf(FERROR, "invalid multi-message %d:%lu [%s%s]\n",
1389                                 tag, (unsigned long)msg_bytes, who_am_i(),
1390                                 inc_recurse ? "/inc" : "");
1391                         exit_cleanup(RERR_STREAMIO);
1392                 }
1393                 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1394                 if (am_generator)
1395                         got_flist_entry_status(FES_SUCCESS, IVAL(data, 0));
1396                 else
1397                         successful_send(IVAL(data, 0));
1398                 break;
1399         case MSG_NO_SEND:
1400                 if (msg_bytes != 4)
1401                         goto invalid_msg;
1402                 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1403                 if (am_generator)
1404                         got_flist_entry_status(FES_NO_SEND, IVAL(data, 0));
1405                 else
1406                         send_msg(MSG_NO_SEND, data, 4, 0);
1407                 break;
1408         case MSG_ERROR_SOCKET:
1409         case MSG_ERROR_UTF8:
1410         case MSG_CLIENT:
1411         case MSG_LOG:
1412                 if (!am_generator)
1413                         goto invalid_msg;
1414                 if (tag == MSG_ERROR_SOCKET)
1415                         msgs2stderr = 1;
1416                 /* FALL THROUGH */
1417         case MSG_INFO:
1418         case MSG_ERROR:
1419         case MSG_ERROR_XFER:
1420         case MSG_WARNING:
1421                 if (msg_bytes >= sizeof line) {
1422                     overflow:
1423                         rprintf(FERROR,
1424                                 "multiplexing overflow %d:%lu [%s%s]\n",
1425                                 tag, (unsigned long)msg_bytes, who_am_i(),
1426                                 inc_recurse ? "/inc" : "");
1427                         exit_cleanup(RERR_STREAMIO);
1428                 }
1429                 memcpy(line, perform_io(msg_bytes, PIO_INPUT_AND_CONSUME), msg_bytes);
1430                 rwrite((enum logcode)tag, line, msg_bytes, !am_generator);
1431                 if (first_message) {
1432                         if (list_only && !am_sender && tag == 1 && msg_bytes < sizeof line) {
1433                                 line[msg_bytes] = '\0';
1434                                 check_for_d_option_error(line);
1435                         }
1436                         first_message = 0;
1437                 }
1438                 break;
1439         case MSG_ERROR_EXIT:
1440                 if (msg_bytes != 4)
1441                         goto invalid_msg;
1442                 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1443                 val = IVAL(data, 0);
1444                 if (am_generator && protocol_version >= 31)
1445                         send_msg_int(MSG_ERROR_EXIT, val);
1446                 if (am_generator)
1447                         val = RERR_RCVR_ERROR; /* avoids duplicate errors */
1448                 exit_cleanup(val);
1449         default:
1450                 rprintf(FERROR, "unexpected tag %d [%s%s]\n",
1451                         tag, who_am_i(), inc_recurse ? "/inc" : "");
1452                 exit_cleanup(RERR_STREAMIO);
1453         }
1454 }
1455
1456 void wait_for_receiver(void)
1457 {
1458         if (!iobuf.raw_input_ends_before)
1459                 read_a_msg();
1460
1461         if (iobuf.raw_input_ends_before) {
1462                 int ndx = read_int(iobuf.in_fd);
1463                 if (ndx < 0) {
1464                         switch (ndx) {
1465                         case NDX_FLIST_EOF:
1466                                 flist_eof = 1;
1467                                 if (DEBUG_GTE(FLIST, 3))
1468                                         rprintf(FINFO, "[%s] flist_eof=1\n", who_am_i());
1469                                 break;
1470                         case NDX_DONE:
1471                                 msgdone_cnt++;
1472                                 break;
1473                         default:
1474                                 exit_cleanup(RERR_STREAMIO);
1475                         }
1476                 } else {
1477                         struct file_list *flist;
1478                         if (DEBUG_GTE(FLIST, 2)) {
1479                                 rprintf(FINFO, "[%s] receiving flist for dir %d\n",
1480                                         who_am_i(), ndx);
1481                         }
1482                         flist = recv_file_list(iobuf.in_fd);
1483                         flist->parent_ndx = ndx;
1484 #ifdef SUPPORT_HARD_LINKS
1485                         if (preserve_hard_links)
1486                                 match_hard_links(flist);
1487 #endif
1488                 }
1489         }
1490 }
1491
1492 unsigned short read_shortint(int f)
1493 {
1494         char b[2];
1495         read_buf(f, b, 2);
1496         return (UVAL(b, 1) << 8) + UVAL(b, 0);
1497 }
1498
1499 int32 read_int(int f)
1500 {
1501         char b[4];
1502         int32 num;
1503
1504         read_buf(f, b, 4);
1505         num = IVAL(b, 0);
1506 #if SIZEOF_INT32 > 4
1507         if (num & (int32)0x80000000)
1508                 num |= ~(int32)0xffffffff;
1509 #endif
1510         return num;
1511 }
1512
1513 int32 read_varint(int f)
1514 {
1515         union {
1516                 char b[5];
1517                 int32 x;
1518         } u;
1519         uchar ch;
1520         int extra;
1521
1522         u.x = 0;
1523         ch = read_byte(f);
1524         extra = int_byte_extra[ch / 4];
1525         if (extra) {
1526                 uchar bit = ((uchar)1<<(8-extra));
1527                 if (extra >= (int)sizeof u.b) {
1528                         rprintf(FERROR, "Overflow in read_varint()\n");
1529                         exit_cleanup(RERR_STREAMIO);
1530                 }
1531                 read_buf(f, u.b, extra);
1532                 u.b[extra] = ch & (bit-1);
1533         } else
1534                 u.b[0] = ch;
1535 #if CAREFUL_ALIGNMENT
1536         u.x = IVAL(u.b,0);
1537 #endif
1538 #if SIZEOF_INT32 > 4
1539         if (u.x & (int32)0x80000000)
1540                 u.x |= ~(int32)0xffffffff;
1541 #endif
1542         return u.x;
1543 }
1544
1545 int64 read_varlong(int f, uchar min_bytes)
1546 {
1547         union {
1548                 char b[9];
1549                 int64 x;
1550         } u;
1551         char b2[8];
1552         int extra;
1553
1554 #if SIZEOF_INT64 < 8
1555         memset(u.b, 0, 8);
1556 #else
1557         u.x = 0;
1558 #endif
1559         read_buf(f, b2, min_bytes);
1560         memcpy(u.b, b2+1, min_bytes-1);
1561         extra = int_byte_extra[CVAL(b2, 0) / 4];
1562         if (extra) {
1563                 uchar bit = ((uchar)1<<(8-extra));
1564                 if (min_bytes + extra > (int)sizeof u.b) {
1565                         rprintf(FERROR, "Overflow in read_varlong()\n");
1566                         exit_cleanup(RERR_STREAMIO);
1567                 }
1568                 read_buf(f, u.b + min_bytes - 1, extra);
1569                 u.b[min_bytes + extra - 1] = CVAL(b2, 0) & (bit-1);
1570 #if SIZEOF_INT64 < 8
1571                 if (min_bytes + extra > 5 || u.b[4] || CVAL(u.b,3) & 0x80) {
1572                         rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1573                         exit_cleanup(RERR_UNSUPPORTED);
1574                 }
1575 #endif
1576         } else
1577                 u.b[min_bytes + extra - 1] = CVAL(b2, 0);
1578 #if SIZEOF_INT64 < 8
1579         u.x = IVAL(u.b,0);
1580 #elif CAREFUL_ALIGNMENT
1581         u.x = IVAL(u.b,0) | (((int64)IVAL(u.b,4))<<32);
1582 #endif
1583         return u.x;
1584 }
1585
1586 int64 read_longint(int f)
1587 {
1588 #if SIZEOF_INT64 >= 8
1589         char b[9];
1590 #endif
1591         int32 num = read_int(f);
1592
1593         if (num != (int32)0xffffffff)
1594                 return num;
1595
1596 #if SIZEOF_INT64 < 8
1597         rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1598         exit_cleanup(RERR_UNSUPPORTED);
1599 #else
1600         read_buf(f, b, 8);
1601         return IVAL(b,0) | (((int64)IVAL(b,4))<<32);
1602 #endif
1603 }
1604
1605 void read_buf(int f, char *buf, size_t len)
1606 {
1607         if (f != iobuf.in_fd) {
1608                 if (safe_read(f, buf, len) != len)
1609                         whine_about_eof(f); /* Doesn't return. */
1610                 goto batch_copy;
1611         }
1612
1613         if (!IN_MULTIPLEXED) {
1614                 memcpy(buf, perform_io(len, PIO_INPUT_AND_CONSUME), len);
1615                 total_data_read += len;
1616                 if (forward_flist_data)
1617                         write_buf(iobuf.out_fd, buf, len);
1618           batch_copy:
1619                 if (f == write_batch_monitor_in)
1620                         safe_write(batch_fd, buf, len);
1621                 return;
1622         }
1623
1624         while (1) {
1625                 char *data;
1626                 size_t siz;
1627
1628                 while (!iobuf.raw_input_ends_before)
1629                         read_a_msg();
1630
1631                 siz = MIN(len, iobuf.raw_input_ends_before - iobuf.in.pos);
1632                 data = perform_io(siz, PIO_INPUT_AND_CONSUME);
1633                 if (iobuf.in.pos == iobuf.raw_input_ends_before)
1634                         iobuf.raw_input_ends_before = 0;
1635
1636                 /* The bytes at the "data" pointer will survive long
1637                  * enough to make a copy, but not past future I/O. */
1638                 memcpy(buf, data, siz);
1639                 total_data_read += siz;
1640
1641                 if (forward_flist_data)
1642                         write_buf(iobuf.out_fd, buf, siz);
1643
1644                 if (f == write_batch_monitor_in)
1645                         safe_write(batch_fd, buf, siz);
1646
1647                 if ((len -= siz) == 0)
1648                         break;
1649                 buf += siz;
1650         }
1651 }
1652
1653 void read_sbuf(int f, char *buf, size_t len)
1654 {
1655         read_buf(f, buf, len);
1656         buf[len] = '\0';
1657 }
1658
1659 uchar read_byte(int f)
1660 {
1661         uchar c;
1662         read_buf(f, (char*)&c, 1);
1663         return c;
1664 }
1665
1666 int read_vstring(int f, char *buf, int bufsize)
1667 {
1668         int len = read_byte(f);
1669
1670         if (len & 0x80)
1671                 len = (len & ~0x80) * 0x100 + read_byte(f);
1672
1673         if (len >= bufsize) {
1674                 rprintf(FERROR, "over-long vstring received (%d > %d)\n",
1675                         len, bufsize - 1);
1676                 return -1;
1677         }
1678
1679         if (len)
1680                 read_buf(f, buf, len);
1681         buf[len] = '\0';
1682         return len;
1683 }
1684
1685 /* Populate a sum_struct with values from the socket.  This is
1686  * called by both the sender and the receiver. */
1687 void read_sum_head(int f, struct sum_struct *sum)
1688 {
1689         int32 max_blength = protocol_version < 30 ? OLD_MAX_BLOCK_SIZE : MAX_BLOCK_SIZE;
1690         sum->count = read_int(f);
1691         if (sum->count < 0) {
1692                 rprintf(FERROR, "Invalid checksum count %ld [%s]\n",
1693                         (long)sum->count, who_am_i());
1694                 exit_cleanup(RERR_PROTOCOL);
1695         }
1696         sum->blength = read_int(f);
1697         if (sum->blength < 0 || sum->blength > max_blength) {
1698                 rprintf(FERROR, "Invalid block length %ld [%s]\n",
1699                         (long)sum->blength, who_am_i());
1700                 exit_cleanup(RERR_PROTOCOL);
1701         }
1702         sum->s2length = protocol_version < 27 ? csum_length : (int)read_int(f);
1703         if (sum->s2length < 0 || sum->s2length > MAX_DIGEST_LEN) {
1704                 rprintf(FERROR, "Invalid checksum length %d [%s]\n",
1705                         sum->s2length, who_am_i());
1706                 exit_cleanup(RERR_PROTOCOL);
1707         }
1708         sum->remainder = read_int(f);
1709         if (sum->remainder < 0 || sum->remainder > sum->blength) {
1710                 rprintf(FERROR, "Invalid remainder length %ld [%s]\n",
1711                         (long)sum->remainder, who_am_i());
1712                 exit_cleanup(RERR_PROTOCOL);
1713         }
1714 }
1715
1716 /* Send the values from a sum_struct over the socket.  Set sum to
1717  * NULL if there are no checksums to send.  This is called by both
1718  * the generator and the sender. */
1719 void write_sum_head(int f, struct sum_struct *sum)
1720 {
1721         static struct sum_struct null_sum;
1722
1723         if (sum == NULL)
1724                 sum = &null_sum;
1725
1726         write_int(f, sum->count);
1727         write_int(f, sum->blength);
1728         if (protocol_version >= 27)
1729                 write_int(f, sum->s2length);
1730         write_int(f, sum->remainder);
1731 }
1732
1733 /* Sleep after writing to limit I/O bandwidth usage.
1734  *
1735  * @todo Rather than sleeping after each write, it might be better to
1736  * use some kind of averaging.  The current algorithm seems to always
1737  * use a bit less bandwidth than specified, because it doesn't make up
1738  * for slow periods.  But arguably this is a feature.  In addition, we
1739  * ought to take the time used to write the data into account.
1740  *
1741  * During some phases of big transfers (file FOO is uptodate) this is
1742  * called with a small bytes_written every time.  As the kernel has to
1743  * round small waits up to guarantee that we actually wait at least the
1744  * requested number of microseconds, this can become grossly inaccurate.
1745  * We therefore keep track of the bytes we've written over time and only
1746  * sleep when the accumulated delay is at least 1 tenth of a second. */
1747 static void sleep_for_bwlimit(int bytes_written)
1748 {
1749         static struct timeval prior_tv;
1750         static long total_written = 0;
1751         struct timeval tv, start_tv;
1752         long elapsed_usec, sleep_usec;
1753
1754 #define ONE_SEC 1000000L /* # of microseconds in a second */
1755
1756         total_written += bytes_written;
1757
1758         gettimeofday(&start_tv, NULL);
1759         if (prior_tv.tv_sec) {
1760                 elapsed_usec = (start_tv.tv_sec - prior_tv.tv_sec) * ONE_SEC
1761                              + (start_tv.tv_usec - prior_tv.tv_usec);
1762                 total_written -= elapsed_usec * bwlimit / (ONE_SEC/1024);
1763                 if (total_written < 0)
1764                         total_written = 0;
1765         }
1766
1767         sleep_usec = total_written * (ONE_SEC/1024) / bwlimit;
1768         if (sleep_usec < ONE_SEC / 10) {
1769                 prior_tv = start_tv;
1770                 return;
1771         }
1772
1773         tv.tv_sec  = sleep_usec / ONE_SEC;
1774         tv.tv_usec = sleep_usec % ONE_SEC;
1775         select(0, NULL, NULL, NULL, &tv);
1776
1777         gettimeofday(&prior_tv, NULL);
1778         elapsed_usec = (prior_tv.tv_sec - start_tv.tv_sec) * ONE_SEC
1779                      + (prior_tv.tv_usec - start_tv.tv_usec);
1780         total_written = (sleep_usec - elapsed_usec) * bwlimit / (ONE_SEC/1024);
1781 }
1782
1783 void io_flush(int flush_it_all)
1784 {
1785         if (iobuf.out.len > iobuf.out_empty_len) {
1786                 if (flush_it_all) /* FULL_FLUSH: flush everything in the output buffers */
1787                         perform_io(iobuf.out.size - iobuf.out_empty_len, PIO_NEED_OUTROOM);
1788                 else /* NORMAL_FLUSH: flush at least 1 byte */
1789                         perform_io(iobuf.out.size - iobuf.out.len + 1, PIO_NEED_OUTROOM);
1790         }
1791         if (iobuf.msg.len)
1792                 perform_io(iobuf.msg.size, PIO_NEED_MSGROOM);
1793 }
1794
1795 void write_shortint(int f, unsigned short x)
1796 {
1797         char b[2];
1798         b[0] = (char)x;
1799         b[1] = (char)(x >> 8);
1800         write_buf(f, b, 2);
1801 }
1802
1803 void write_int(int f, int32 x)
1804 {
1805         char b[4];
1806         SIVAL(b, 0, x);
1807         write_buf(f, b, 4);
1808 }
1809
1810 void write_varint(int f, int32 x)
1811 {
1812         char b[5];
1813         uchar bit;
1814         int cnt = 4;
1815
1816         SIVAL(b, 1, x);
1817
1818         while (cnt > 1 && b[cnt] == 0)
1819                 cnt--;
1820         bit = ((uchar)1<<(7-cnt+1));
1821         if (CVAL(b, cnt) >= bit) {
1822                 cnt++;
1823                 *b = ~(bit-1);
1824         } else if (cnt > 1)
1825                 *b = b[cnt] | ~(bit*2-1);
1826         else
1827                 *b = b[cnt];
1828
1829         write_buf(f, b, cnt);
1830 }
1831
1832 void write_varlong(int f, int64 x, uchar min_bytes)
1833 {
1834         char b[9];
1835         uchar bit;
1836         int cnt = 8;
1837
1838         SIVAL(b, 1, x);
1839 #if SIZEOF_INT64 >= 8
1840         SIVAL(b, 5, x >> 32);
1841 #else
1842         if (x <= 0x7FFFFFFF && x >= 0)
1843                 memset(b + 5, 0, 4);
1844         else {
1845                 rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1846                 exit_cleanup(RERR_UNSUPPORTED);
1847         }
1848 #endif
1849
1850         while (cnt > min_bytes && b[cnt] == 0)
1851                 cnt--;
1852         bit = ((uchar)1<<(7-cnt+min_bytes));
1853         if (CVAL(b, cnt) >= bit) {
1854                 cnt++;
1855                 *b = ~(bit-1);
1856         } else if (cnt > min_bytes)
1857                 *b = b[cnt] | ~(bit*2-1);
1858         else
1859                 *b = b[cnt];
1860
1861         write_buf(f, b, cnt);
1862 }
1863
1864 /*
1865  * Note: int64 may actually be a 32-bit type if ./configure couldn't find any
1866  * 64-bit types on this platform.
1867  */
1868 void write_longint(int f, int64 x)
1869 {
1870         char b[12], * const s = b+4;
1871
1872         SIVAL(s, 0, x);
1873         if (x <= 0x7FFFFFFF && x >= 0) {
1874                 write_buf(f, s, 4);
1875                 return;
1876         }
1877
1878 #if SIZEOF_INT64 < 8
1879         rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1880         exit_cleanup(RERR_UNSUPPORTED);
1881 #else
1882         memset(b, 0xFF, 4);
1883         SIVAL(s, 4, x >> 32);
1884         write_buf(f, b, 12);
1885 #endif
1886 }
1887
1888 void write_buf(int f, const char *buf, size_t len)
1889 {
1890         size_t pos, siz;
1891
1892         if (f != iobuf.out_fd) {
1893                 safe_write(f, buf, len);
1894                 goto batch_copy;
1895         }
1896
1897         if (iobuf.out.size - iobuf.out.len < len)
1898                 perform_io(len, PIO_NEED_OUTROOM);
1899
1900         pos = iobuf.out.pos + iobuf.out.len; /* Must be set after any flushing. */
1901         if (pos >= iobuf.out.size)
1902                 pos -= iobuf.out.size;
1903
1904         /* Handle a split copy if we wrap around the end of the circular buffer. */
1905         if (pos >= iobuf.out.pos && (siz = iobuf.out.size - pos) < len) {
1906                 memcpy(iobuf.out.buf + pos, buf, siz);
1907                 memcpy(iobuf.out.buf, buf + siz, len - siz);
1908         } else
1909                 memcpy(iobuf.out.buf + pos, buf, len);
1910
1911         iobuf.out.len += len;
1912         total_data_written += len;
1913
1914   batch_copy:
1915         if (f == write_batch_monitor_out)
1916                 safe_write(batch_fd, buf, len);
1917 }
1918
1919 /* Write a string to the connection */
1920 void write_sbuf(int f, const char *buf)
1921 {
1922         write_buf(f, buf, strlen(buf));
1923 }
1924
1925 void write_byte(int f, uchar c)
1926 {
1927         write_buf(f, (char *)&c, 1);
1928 }
1929
1930 void write_vstring(int f, const char *str, int len)
1931 {
1932         uchar lenbuf[3], *lb = lenbuf;
1933
1934         if (len > 0x7F) {
1935                 if (len > 0x7FFF) {
1936                         rprintf(FERROR,
1937                                 "attempting to send over-long vstring (%d > %d)\n",
1938                                 len, 0x7FFF);
1939                         exit_cleanup(RERR_PROTOCOL);
1940                 }
1941                 *lb++ = len / 0x100 + 0x80;
1942         }
1943         *lb = len;
1944
1945         write_buf(f, (char*)lenbuf, lb - lenbuf + 1);
1946         if (len)
1947                 write_buf(f, str, len);
1948 }
1949
1950 /* Send a file-list index using a byte-reduction method. */
1951 void write_ndx(int f, int32 ndx)
1952 {
1953         static int32 prev_positive = -1, prev_negative = 1;
1954         int32 diff, cnt = 0;
1955         char b[6];
1956
1957         if (protocol_version < 30 || read_batch) {
1958                 write_int(f, ndx);
1959                 return;
1960         }
1961
1962         /* Send NDX_DONE as a single-byte 0 with no side effects.  Send
1963          * negative nums as a positive after sending a leading 0xFF. */
1964         if (ndx >= 0) {
1965                 diff = ndx - prev_positive;
1966                 prev_positive = ndx;
1967         } else if (ndx == NDX_DONE) {
1968                 *b = 0;
1969                 write_buf(f, b, 1);
1970                 return;
1971         } else {
1972                 b[cnt++] = (char)0xFF;
1973                 ndx = -ndx;
1974                 diff = ndx - prev_negative;
1975                 prev_negative = ndx;
1976         }
1977
1978         /* A diff of 1 - 253 is sent as a one-byte diff; a diff of 254 - 32767
1979          * or 0 is sent as a 0xFE + a two-byte diff; otherwise we send 0xFE
1980          * & all 4 bytes of the (non-negative) num with the high-bit set. */
1981         if (diff < 0xFE && diff > 0)
1982                 b[cnt++] = (char)diff;
1983         else if (diff < 0 || diff > 0x7FFF) {
1984                 b[cnt++] = (char)0xFE;
1985                 b[cnt++] = (char)((ndx >> 24) | 0x80);
1986                 b[cnt++] = (char)ndx;
1987                 b[cnt++] = (char)(ndx >> 8);
1988                 b[cnt++] = (char)(ndx >> 16);
1989         } else {
1990                 b[cnt++] = (char)0xFE;
1991                 b[cnt++] = (char)(diff >> 8);
1992                 b[cnt++] = (char)diff;
1993         }
1994         write_buf(f, b, cnt);
1995 }
1996
1997 /* Receive a file-list index using a byte-reduction method. */
1998 int32 read_ndx(int f)
1999 {
2000         static int32 prev_positive = -1, prev_negative = 1;
2001         int32 *prev_ptr, num;
2002         char b[4];
2003
2004         if (protocol_version < 30)
2005                 return read_int(f);
2006
2007         read_buf(f, b, 1);
2008         if (CVAL(b, 0) == 0xFF) {
2009                 read_buf(f, b, 1);
2010                 prev_ptr = &prev_negative;
2011         } else if (CVAL(b, 0) == 0)
2012                 return NDX_DONE;
2013         else
2014                 prev_ptr = &prev_positive;
2015         if (CVAL(b, 0) == 0xFE) {
2016                 read_buf(f, b, 2);
2017                 if (CVAL(b, 0) & 0x80) {
2018                         b[3] = CVAL(b, 0) & ~0x80;
2019                         b[0] = b[1];
2020                         read_buf(f, b+1, 2);
2021                         num = IVAL(b, 0);
2022                 } else
2023                         num = (UVAL(b,0)<<8) + UVAL(b,1) + *prev_ptr;
2024         } else
2025                 num = UVAL(b, 0) + *prev_ptr;
2026         *prev_ptr = num;
2027         if (prev_ptr == &prev_negative)
2028                 num = -num;
2029         return num;
2030 }
2031
2032 /* Read a line of up to bufsiz-1 characters into buf.  Strips
2033  * the (required) trailing newline and all carriage returns.
2034  * Returns 1 for success; 0 for I/O error or truncation. */
2035 int read_line_old(int fd, char *buf, size_t bufsiz)
2036 {
2037         bufsiz--; /* leave room for the null */
2038         while (bufsiz > 0) {
2039                 assert(fd != iobuf.in_fd);
2040                 if (safe_read(fd, buf, 1) == 0)
2041                         return 0;
2042                 if (*buf == '\0')
2043                         return 0;
2044                 if (*buf == '\n')
2045                         break;
2046                 if (*buf != '\r') {
2047                         buf++;
2048                         bufsiz--;
2049                 }
2050         }
2051         *buf = '\0';
2052         return bufsiz > 0;
2053 }
2054
2055 void io_printf(int fd, const char *format, ...)
2056 {
2057         va_list ap;
2058         char buf[BIGPATHBUFLEN];
2059         int len;
2060
2061         va_start(ap, format);
2062         len = vsnprintf(buf, sizeof buf, format, ap);
2063         va_end(ap);
2064
2065         if (len < 0)
2066                 exit_cleanup(RERR_STREAMIO);
2067
2068         if (len > (int)sizeof buf) {
2069                 rprintf(FERROR, "io_printf() was too long for the buffer.\n");
2070                 exit_cleanup(RERR_STREAMIO);
2071         }
2072
2073         write_sbuf(fd, buf);
2074 }
2075
2076 /* Setup for multiplexing a MSG_* stream with the data stream. */
2077 void io_start_multiplex_out(int fd)
2078 {
2079         io_flush(FULL_FLUSH);
2080
2081         if (msgs2stderr && DEBUG_GTE(IO, 2))
2082                 rprintf(FINFO, "[%s] io_start_multiplex_out(%d)\n", who_am_i(), fd);
2083
2084         iobuf.out_empty_len = 4; /* See also OUT_MULTIPLEXED */
2085         io_start_buffering_out(fd);
2086
2087         iobuf.raw_data_header_pos = iobuf.out.pos + iobuf.out.len;
2088         iobuf.out.len += 4;
2089 }
2090
2091 /* Setup for multiplexing a MSG_* stream with the data stream. */
2092 void io_start_multiplex_in(int fd)
2093 {
2094         if (msgs2stderr && DEBUG_GTE(IO, 2))
2095                 rprintf(FINFO, "[%s] io_start_multiplex_in(%d)\n", who_am_i(), fd);
2096
2097         iobuf.in_multiplexed = True; /* See also IN_MULTIPLEXED */
2098         io_start_buffering_in(fd);
2099 }
2100
2101 int io_end_multiplex_in(int mode)
2102 {
2103         int ret = iobuf.in_multiplexed ? iobuf.in_fd : -1;
2104
2105         if (msgs2stderr && DEBUG_GTE(IO, 2))
2106                 rprintf(FINFO, "[%s] io_end_multiplex_in(mode=%d)\n", who_am_i(), mode);
2107
2108         iobuf.in_multiplexed = False;
2109         if (mode == MPLX_SWITCHING)
2110                 iobuf.raw_input_ends_before = 0;
2111         else
2112                 assert(iobuf.raw_input_ends_before == 0);
2113         if (mode != MPLX_TO_BUFFERED)
2114                 io_end_buffering_in(mode);
2115
2116         return ret;
2117 }
2118
2119 int io_end_multiplex_out(int mode)
2120 {
2121         int ret = iobuf.out_empty_len ? iobuf.out_fd : -1;
2122
2123         if (msgs2stderr && DEBUG_GTE(IO, 2))
2124                 rprintf(FINFO, "[%s] io_end_multiplex_out(mode=%d)\n", who_am_i(), mode);
2125
2126         if (mode != MPLX_TO_BUFFERED)
2127                 io_end_buffering_out(mode);
2128         else
2129                 io_flush(FULL_FLUSH);
2130
2131         iobuf.out.len = 0;
2132         iobuf.out_empty_len = 0;
2133
2134         return ret;
2135 }
2136
2137 void start_write_batch(int fd)
2138 {
2139         /* Some communication has already taken place, but we don't
2140          * enable batch writing until here so that we can write a
2141          * canonical record of the communication even though the
2142          * actual communication so far depends on whether a daemon
2143          * is involved. */
2144         write_int(batch_fd, protocol_version);
2145         if (protocol_version >= 30)
2146                 write_byte(batch_fd, inc_recurse);
2147         write_int(batch_fd, checksum_seed);
2148
2149         if (am_sender)
2150                 write_batch_monitor_out = fd;
2151         else
2152                 write_batch_monitor_in = fd;
2153 }
2154
2155 void stop_write_batch(void)
2156 {
2157         write_batch_monitor_out = -1;
2158         write_batch_monitor_in = -1;
2159 }