Fixed a couple iconv loops to properly handle incomplete chars
[rsync/rsync.git] / io.c
1 /*
2  * Socket and pipe I/O utilities used in rsync.
3  *
4  * Copyright (C) 1996-2001 Andrew Tridgell
5  * Copyright (C) 1996 Paul Mackerras
6  * Copyright (C) 2001, 2002 Martin Pool <mbp@samba.org>
7  * Copyright (C) 2003-2009 Wayne Davison
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License as published by
11  * the Free Software Foundation; either version 3 of the License, or
12  * (at your option) any later version.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  * GNU General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License along
20  * with this program; if not, visit the http://fsf.org website.
21  */
22
23 /* Rsync provides its own multiplexing system, which is used to send
24  * stderr and stdout over a single socket.
25  *
26  * For historical reasons this is off during the start of the
27  * connection, but it's switched on quite early using
28  * io_start_multiplex_out() and io_start_multiplex_in(). */
29
30 #include "rsync.h"
31 #include "ifuncs.h"
32 #include "inums.h"
33
34 /** If no timeout is specified then use a 60 second select timeout */
35 #define SELECT_TIMEOUT 60
36
37 extern int bwlimit;
38 extern size_t bwlimit_writemax;
39 extern int io_timeout;
40 extern int am_server;
41 extern int am_daemon;
42 extern int am_sender;
43 extern int am_generator;
44 extern int msgs2stderr;
45 extern int inc_recurse;
46 extern int io_error;
47 extern int eol_nulls;
48 extern int flist_eof;
49 extern int file_total;
50 extern int file_old_total;
51 extern int list_only;
52 extern int read_batch;
53 extern int protect_args;
54 extern int checksum_seed;
55 extern int protocol_version;
56 extern int remove_source_files;
57 extern int preserve_hard_links;
58 extern BOOL extra_flist_sending_enabled;
59 extern struct stats stats;
60 extern struct file_list *cur_flist;
61 #ifdef ICONV_OPTION
62 extern int filesfrom_convert;
63 extern iconv_t ic_send, ic_recv;
64 #endif
65
66 int csum_length = SHORT_SUM_LENGTH; /* initial value */
67 int allowed_lull = 0;
68 int ignore_timeout = 0;
69 int batch_fd = -1;
70 int msgdone_cnt = 0;
71 int forward_flist_data = 0;
72
73 /* Ignore an EOF error if non-zero. See whine_about_eof(). */
74 int kluge_around_eof = 0;
75
76 int sock_f_in = -1;
77 int sock_f_out = -1;
78
79 static struct {
80         xbuf in, out, msg;
81         int in_fd;
82         int out_fd; /* Both "out" and "msg" go to this fd. */
83         BOOL in_multiplexed;
84         unsigned out_empty_len;
85         size_t raw_data_header_pos;      /* in the out xbuf */
86         size_t raw_flushing_ends_before; /* in the out xbuf */
87         size_t raw_input_ends_before;    /* in the in xbuf */
88 } iobuf = { .in_fd = -1, .out_fd = -1 };
89
90 static time_t last_io_in;
91 static time_t last_io_out;
92
93 static int write_batch_monitor_in = -1;
94 static int write_batch_monitor_out = -1;
95
96 static int ff_forward_fd = -1;
97 static char ff_lastchar;
98 static xbuf ff_xb = EMPTY_XBUF;
99 #ifdef ICONV_OPTION
100 static xbuf iconv_buf = EMPTY_XBUF;
101 #endif
102 static int select_timeout = SELECT_TIMEOUT;
103 static int active_filecnt = 0;
104 static OFF_T active_bytecnt = 0;
105 static int first_message = 1;
106
107 static char int_byte_extra[64] = {
108         0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* (00 - 3F)/4 */
109         0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* (40 - 7F)/4 */
110         1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* (80 - BF)/4 */
111         2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 5, 6, /* (C0 - FF)/4 */
112 };
113
114 #define IN_MULTIPLEXED (iobuf.in_multiplexed)
115 #define OUT_MULTIPLEXED (iobuf.out_empty_len != 0)
116
117 #define PIO_NEED_INPUT (1<<0) /* The *_NEED_* flags are mutually exclusive. */
118 #define PIO_NEED_OUTROOM (1<<1)
119 #define PIO_NEED_MSGROOM (1<<2)
120
121 #define PIO_CONSUME_INPUT (1<<4) /* Must becombined with PIO_NEED_INPUT. */
122
123 #define PIO_INPUT_AND_CONSUME (PIO_NEED_INPUT | PIO_CONSUME_INPUT)
124 #define PIO_NEED_FLAGS (PIO_NEED_INPUT | PIO_NEED_OUTROOM | PIO_NEED_MSGROOM)
125
126 #define REMOTE_OPTION_ERROR "rsync: on remote machine: -"
127 #define REMOTE_OPTION_ERROR2 ": unknown option"
128
129 #define FILESFROM_BUFLEN 2048
130
131 enum festatus { FES_SUCCESS, FES_REDO, FES_NO_SEND };
132
133 static flist_ndx_list redo_list, hlink_list;
134
135 static void sleep_for_bwlimit(int bytes_written);
136
137 static void check_timeout(void)
138 {
139         time_t t;
140
141         if (!io_timeout || ignore_timeout)
142                 return;
143
144         if (!last_io_in) {
145                 last_io_in = time(NULL);
146                 return;
147         }
148
149         t = time(NULL);
150
151         if (t - last_io_in >= io_timeout) {
152                 if (!am_server && !am_daemon) {
153                         rprintf(FERROR, "io timeout after %d seconds -- exiting\n",
154                                 (int)(t-last_io_in));
155                 }
156                 exit_cleanup(RERR_TIMEOUT);
157         }
158 }
159
160 /* It's almost always an error to get an EOF when we're trying to read from the
161  * network, because the protocol is (for the most part) self-terminating.
162  *
163  * There is one case for the receiver when it is at the end of the transfer
164  * (hanging around reading any keep-alive packets that might come its way): if
165  * the sender dies before the generator's kill-signal comes through, we can end
166  * up here needing to loop until the kill-signal arrives.  In this situation,
167  * kluge_around_eof will be < 0.
168  *
169  * There is another case for older protocol versions (< 24) where the module
170  * listing was not terminated, so we must ignore an EOF error in that case and
171  * exit.  In this situation, kluge_around_eof will be > 0. */
172 static NORETURN void whine_about_eof(int fd)
173 {
174         if (kluge_around_eof && fd == sock_f_in) {
175                 int i;
176                 if (kluge_around_eof > 0)
177                         exit_cleanup(0);
178                 /* If we're still here after 10 seconds, exit with an error. */
179                 for (i = 10*1000/20; i--; )
180                         msleep(20);
181         }
182
183         rprintf(FERROR, RSYNC_NAME ": connection unexpectedly closed "
184                 "(%s bytes received so far) [%s]\n",
185                 big_num(stats.total_read), who_am_i());
186
187         exit_cleanup(RERR_STREAMIO);
188 }
189
190 /* Do a safe read, handling any needed looping and error handling.
191  * Returns the count of the bytes read, which will only be different
192  * from "len" if we encountered an EOF.  This routine is not used on
193  * the socket except very early in the transfer. */
194 static size_t safe_read(int fd, char *buf, size_t len)
195 {
196         size_t got;
197         int n;
198
199         assert(fd != iobuf.in_fd);
200
201         n = read(fd, buf, len);
202         if ((size_t)n == len || n == 0) {
203                 if (DEBUG_GTE(IO, 2))
204                         rprintf(FINFO, "[%s] safe_read(%d)=%ld\n", who_am_i(), fd, (long)n);
205                 return n;
206         }
207         if (n < 0) {
208                 if (errno != EINTR && errno != EWOULDBLOCK && errno != EAGAIN) {
209                   read_failed:
210                         rsyserr(FERROR, errno, "safe_read failed to read %ld bytes [%s]",
211                                 (long)len, who_am_i());
212                         exit_cleanup(RERR_STREAMIO);
213                 }
214                 got = 0;
215         } else
216                 got = n;
217
218         while (1) {
219                 struct timeval tv;
220                 fd_set r_fds, e_fds;
221                 int cnt;
222
223                 FD_ZERO(&r_fds);
224                 FD_SET(fd, &r_fds);
225                 FD_ZERO(&e_fds);
226                 FD_SET(fd, &e_fds);
227                 tv.tv_sec = select_timeout;
228                 tv.tv_usec = 0;
229
230                 cnt = select(fd+1, &r_fds, NULL, &e_fds, &tv);
231                 if (cnt <= 0) {
232                         if (cnt < 0 && errno == EBADF) {
233                                 rsyserr(FERROR, errno, "safe_read select failed [%s]",
234                                         who_am_i());
235                                 exit_cleanup(RERR_FILEIO);
236                         }
237                         check_timeout();
238                         continue;
239                 }
240
241                 /*if (FD_ISSET(fd, &e_fds))
242                         rprintf(FINFO, "select exception on fd %d\n", fd); */
243
244                 if (FD_ISSET(fd, &r_fds)) {
245                         n = read(fd, buf + got, len - got);
246                         if (DEBUG_GTE(IO, 2))
247                                 rprintf(FINFO, "[%s] safe_read(%d)=%ld\n", who_am_i(), fd, (long)n);
248                         if (n == 0)
249                                 break;
250                         if (n < 0) {
251                                 if (errno == EINTR)
252                                         continue;
253                                 goto read_failed;
254                         }
255                         if ((got += (size_t)n) == len)
256                                 break;
257                 }
258         }
259
260         return got;
261 }
262
263 static const char *what_fd_is(int fd)
264 {
265         static char buf[20];
266
267         if (fd == sock_f_out)
268                 return "socket";
269         else if (fd == iobuf.out_fd)
270                 return "message fd";
271         else if (fd == batch_fd)
272                 return "batch file";
273         else {
274                 snprintf(buf, sizeof buf, "fd %d", fd);
275                 return buf;
276         }
277 }
278
279 /* Do a safe write, handling any needed looping and error handling.
280  * Returns only if everything was successfully written.  This routine
281  * is not used on the socket except very early in the transfer. */
282 static void safe_write(int fd, const char *buf, size_t len)
283 {
284         int n;
285
286         assert(fd != iobuf.out_fd);
287
288         n = write(fd, buf, len);
289         if ((size_t)n == len)
290                 return;
291         if (n < 0) {
292                 if (errno != EINTR && errno != EWOULDBLOCK && errno != EAGAIN) {
293                   write_failed:
294                         rsyserr(FERROR, errno,
295                                 "safe_write failed to write %ld bytes to %s [%s]",
296                                 (long)len, what_fd_is(fd), who_am_i());
297                         exit_cleanup(RERR_STREAMIO);
298                 }
299         } else {
300                 buf += n;
301                 len -= n;
302         }
303
304         while (len) {
305                 struct timeval tv;
306                 fd_set w_fds;
307                 int cnt;
308
309                 FD_ZERO(&w_fds);
310                 FD_SET(fd, &w_fds);
311                 tv.tv_sec = select_timeout;
312                 tv.tv_usec = 0;
313
314                 cnt = select(fd + 1, NULL, &w_fds, NULL, &tv);
315                 if (cnt <= 0) {
316                         if (cnt < 0 && errno == EBADF) {
317                                 rsyserr(FERROR, errno, "safe_write select failed on %s [%s]",
318                                         what_fd_is(fd), who_am_i());
319                                 exit_cleanup(RERR_FILEIO);
320                         }
321                         check_timeout();
322                         continue;
323                 }
324
325                 if (FD_ISSET(fd, &w_fds)) {
326                         n = write(fd, buf, len);
327                         if (n < 0) {
328                                 if (errno == EINTR)
329                                         continue;
330                                 goto write_failed;
331                         }
332                         buf += n;
333                         len -= n;
334                 }
335         }
336 }
337
338 /* This is only called when files-from data is known to be available.  We read
339  * a chunk of data and put it into the output buffer. */
340 static void forward_filesfrom_data(void)
341 {
342         int len;
343
344         len = read(ff_forward_fd, ff_xb.buf + ff_xb.len, ff_xb.size - ff_xb.len);
345         if (len <= 0) {
346                 if (len == 0 || errno != EINTR) {
347                         /* Send end-of-file marker */
348                         ff_forward_fd = -1;
349                         write_buf(iobuf.out_fd, "\0\0", ff_lastchar ? 2 : 1);
350                         free_xbuf(&ff_xb);
351                         if (protocol_version < 31)
352                                 io_start_multiplex_out(iobuf.out_fd);
353                 }
354                 return;
355         }
356
357         if (DEBUG_GTE(IO, 2))
358                 rprintf(FINFO, "[%s] files-from read=%ld\n", who_am_i(), (long)len);
359
360 #ifdef ICONV_OPTION
361         len += ff_xb.len;
362 #endif
363
364         if (!eol_nulls) {
365                 char *s = ff_xb.buf + len;
366                 /* Transform CR and/or LF into '\0' */
367                 while (s-- > ff_xb.buf) {
368                         if (*s == '\n' || *s == '\r')
369                                 *s = '\0';
370                 }
371         }
372
373         if (ff_lastchar)
374                 ff_xb.pos = 0;
375         else {
376                 char *s = ff_xb.buf;
377                 /* Last buf ended with a '\0', so don't let this buf start with one. */
378                 while (len && *s == '\0')
379                         s++, len--;
380                 ff_xb.pos = s - ff_xb.buf;
381         }
382
383 #ifdef ICONV_OPTION
384         if (filesfrom_convert && len) {
385                 char *sob = ff_xb.buf + ff_xb.pos, *s = sob;
386                 char *eob = sob + len;
387                 int flags = ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_CIRCULAR_OUT;
388                 if (ff_lastchar == '\0')
389                         flags |= ICB_INIT;
390                 /* Convert/send each null-terminated string separately, skipping empties. */
391                 while (s != eob) {
392                         if (*s++ == '\0') {
393                                 ff_xb.len = s - sob - 1;
394                                 if (iconvbufs(ic_send, &ff_xb, &iobuf.out, flags) < 0)
395                                         exit_cleanup(RERR_PROTOCOL); /* impossible? */
396                                 write_buf(iobuf.out_fd, s-1, 1); /* Send the '\0'. */
397                                 while (s != eob && *s == '\0')
398                                         s++;
399                                 sob = s;
400                                 ff_xb.pos = sob - ff_xb.buf;
401                                 flags |= ICB_INIT;
402                         }
403                 }
404
405                 if ((ff_xb.len = s - sob) == 0)
406                         ff_lastchar = '\0';
407                 else {
408                         /* Handle a partial string specially, saving any incomplete chars. */
409                         flags &= ~ICB_INCLUDE_INCOMPLETE;
410                         if (iconvbufs(ic_send, &ff_xb, &iobuf.out, flags) < 0) {
411                                 if (errno == E2BIG)
412                                         exit_cleanup(RERR_PROTOCOL); /* impossible? */
413                                 if (ff_xb.pos)
414                                         memmove(ff_xb.buf, ff_xb.buf + ff_xb.pos, ff_xb.len);
415                         }
416                         ff_lastchar = 'x'; /* Anything non-zero. */
417                 }
418         } else
419 #endif
420
421         if (len) {
422                 char *f = ff_xb.buf + ff_xb.pos;
423                 char *t = ff_xb.buf;
424                 char *eob = f + len;
425                 /* Eliminate any multi-'\0' runs. */
426                 while (f != eob) {
427                         if (!(*t++ = *f++)) {
428                                 while (f != eob && *f == '\0')
429                                         f++;
430                         }
431                 }
432                 ff_lastchar = f[-1];
433                 if ((len = t - ff_xb.buf) != 0) {
434                         /* This will not circle back to perform_io() because we only get
435                          * called when there is plenty of room in the output buffer. */
436                         write_buf(iobuf.out_fd, ff_xb.buf, len);
437                 }
438         }
439 }
440
441 /* Perform buffered input and output until specified conditions are met.  When
442  * given a "needed" read requirement, we'll return without doing any I/O if the
443  * iobuf.in bytes are already available.  When reading, we'll read as many
444  * bytes as we can into the buffer, and return as soon as we meet the minimum
445  * read requirement.  When given a "needed" write requirement, we'll return
446  * without doing any I/O if that many bytes will fit in the output buffer (we
447  * check either iobuf.out or iobuf.msg, depending on the flags).  When writing,
448  * we write out as much as we can, and return as soon as the given free-space
449  * requirement is available.
450  *
451  * The iobuf.out and iobuf.msg buffers are circular, so some writes into them
452  * will need to be split when the data needs to wrap around to the start.  In
453  * order to help make this easier for some operations (such as the use of
454  * SIVAL() into the buffer) the buffers MUST have 4 bytes of overflow space at
455  * the end that is not not counted in the "size".  The iobuf.in buffer is not
456  * (currently) circular.  To facilitate the handling of MSG_DATA bytes as they
457  * are read-from/written-into the buffers, see the three raw_* iobuf vars.
458  *
459  * When writing, we flush data in the following priority order:
460  *
461  * 1. Finish writing any in-progress MSG_DATA sequence from iobuf.out.
462  *
463  * 2. Write out all the messages from the message buf (if iobuf.msg is active).
464  *    Yes, this means that a PIO_NEED_OUTROOM call will completely flush any
465  *    messages before getting to the iobuf.out flushing (except for rule 1).
466  *
467  * 3. Write out the raw data from iobuf.out, possibly filling in the multiplexed
468  *    MSG_DATA header that was pre-allocated (when output is multiplexed).
469  *
470  * TODO:  items for possible future work:
471  *
472  *    - Make this routine able to read the generator-to-receiver batch flow?
473  *
474  *    - Make the input buffer circular?
475  *
476  * Unlike the old routines that this replaces, it is OK to read ahead as far as
477  * we can because the read_a_msg() routine now reads its bytes out of the input
478  * buffer.  In the old days, only raw data was in the input buffer, and any
479  * unused raw data in the buf would prevent the reading of socket data. */
480 static char *perform_io(size_t needed, int flags)
481 {
482         fd_set r_fds, e_fds, w_fds;
483         struct timeval tv;
484         int cnt, max_fd;
485         size_t empty_buf_len = 0;
486         xbuf *out;
487         char *data;
488
489         if (iobuf.in.len == 0 && iobuf.in.pos != 0) {
490                 if (iobuf.raw_input_ends_before)
491                         iobuf.raw_input_ends_before -= iobuf.in.pos;
492                 iobuf.in.pos = 0;
493         }
494
495         switch (flags & PIO_NEED_FLAGS) {
496         case PIO_NEED_INPUT:
497                 if (DEBUG_GTE(IO, 3)) {
498                         rprintf(FINFO, "[%s] perform_io(%ld, %sinput)\n",
499                                 who_am_i(), (long)needed, flags & PIO_CONSUME_INPUT ? "consume&" : "");
500                 }
501
502                 /* Make sure the input buffer is big enough to hold "needed" bytes.
503                  * Also make sure it will fit in the free space at the end, or
504                  * else we need to shift some bytes. */
505                 if (needed && iobuf.in.size < needed) {
506                         if (!(iobuf.in.buf = realloc_array(iobuf.in.buf, char, needed)))
507                                 out_of_memory("perform_io");
508                         if (DEBUG_GTE(IO, 4)) {
509                                 rprintf(FINFO, "[%s] resized input buffer from %ld to %ld bytes.\n",
510                                         who_am_i(), (long)iobuf.in.size, (long)needed);
511                         }
512                         iobuf.in.size = needed;
513                 }
514                 if (iobuf.in.size - iobuf.in.pos < needed
515                  || (iobuf.in.len < needed && iobuf.in.len < 1024
516                   && iobuf.in.size - (iobuf.in.pos + iobuf.in.len) < 1024)) {
517                         memmove(iobuf.in.buf, iobuf.in.buf + iobuf.in.pos, iobuf.in.len);
518                         if (DEBUG_GTE(IO, 4)) {
519                                 rprintf(FINFO,
520                                         "[%s] moved %ld bytes from %ld to 0 in the input buffer (size=%ld, needed=%ld).\n",
521                                         who_am_i(), (long)iobuf.in.len, (long)iobuf.in.pos, (long)iobuf.in.size, (long)needed);
522                         }
523                         if (iobuf.raw_input_ends_before)
524                                 iobuf.raw_input_ends_before -= iobuf.in.pos;
525                         iobuf.in.pos = 0;
526                 }
527                 break;
528
529         case PIO_NEED_OUTROOM:
530                 /* We never resize the circular output buffer. */
531                 if (iobuf.out.size - iobuf.out_empty_len < needed) {
532                         fprintf(stderr, "need to write %ld bytes, iobuf.out.buf is only %ld bytes.\n",
533                                 (long)needed, (long)(iobuf.out.size - iobuf.out_empty_len));
534                         exit_cleanup(RERR_PROTOCOL);
535                 }
536
537                 if (DEBUG_GTE(IO, 3)) {
538                         rprintf(FINFO, "[%s] perform_io(%ld, outroom) needs to flush %ld\n",
539                                 who_am_i(), (long)needed,
540                                 iobuf.out.len > iobuf.out.size - needed
541                                 ? (long)iobuf.out.len - (iobuf.out.size - needed) : 0L);
542                 }
543                 break;
544
545         case PIO_NEED_MSGROOM:
546                 /* We never resize the circular message buffer. */
547                 if (iobuf.msg.size < needed) {
548                         fprintf(stderr, "need to write %ld bytes, iobuf.msg.buf is only %ld bytes.\n",
549                                 (long)needed, (long)iobuf.msg.size);
550                         exit_cleanup(RERR_PROTOCOL);
551                 }
552
553                 if (DEBUG_GTE(IO, 3)) {
554                         rprintf(FINFO, "[%s] perform_io(%ld, msgroom) needs to flush %ld\n",
555                                 who_am_i(), (long)needed,
556                                 iobuf.out.len > iobuf.msg.size - needed
557                                 ? (long)iobuf.out.len - (iobuf.msg.size - needed) : 0L);
558                 }
559                 break;
560
561         case 0:
562                 if (DEBUG_GTE(IO, 3))
563                         rprintf(FINFO, "[%s] perform_io(%ld, %d)\n", who_am_i(), (long)needed, flags);
564                 break;
565
566         default:
567                 exit_cleanup(RERR_UNSUPPORTED);
568         }
569
570         while (1) {
571                 switch (flags & PIO_NEED_FLAGS) {
572                 case PIO_NEED_INPUT:
573                         if (iobuf.in.len >= needed)
574                                 goto double_break;
575                         break;
576                 case PIO_NEED_OUTROOM:
577                         if (iobuf.out.len <= iobuf.out.size - needed)
578                                 goto double_break;
579                         break;
580                 case PIO_NEED_MSGROOM:
581                         if (iobuf.msg.len <= iobuf.msg.size - needed)
582                                 goto double_break;
583                         break;
584                 }
585
586                 max_fd = -1;
587
588                 FD_ZERO(&r_fds);
589                 FD_ZERO(&e_fds);
590                 if (iobuf.in_fd >= 0 && iobuf.in.size - (iobuf.in.pos + iobuf.in.len)) {
591                         if (!read_batch || batch_fd >= 0) {
592                                 FD_SET(iobuf.in_fd, &r_fds);
593                                 FD_SET(iobuf.in_fd, &e_fds);
594                         }
595                         if (iobuf.in_fd > max_fd)
596                                 max_fd = iobuf.in_fd;
597                 }
598
599                 /* Only do more filesfrom processing if there is enough room in the out buffer. */
600                 if (ff_forward_fd >= 0 && iobuf.out.size - iobuf.out.len > FILESFROM_BUFLEN*2) {
601                         FD_SET(ff_forward_fd, &r_fds);
602                         if (ff_forward_fd > max_fd)
603                                 max_fd = ff_forward_fd;
604                 }
605
606                 FD_ZERO(&w_fds);
607                 if (iobuf.out_fd >= 0) {
608                         if (iobuf.raw_flushing_ends_before
609                          || (!iobuf.msg.len && iobuf.out.len > iobuf.out_empty_len && !(flags & PIO_NEED_MSGROOM))) {
610                                 if (OUT_MULTIPLEXED && !iobuf.raw_flushing_ends_before) {
611                                         size_t val;
612
613                                         /* The iobuf.raw_flushing_ends_before value can point off the end
614                                          * of the iobuf.out buffer for a while, for easier subtracting. */
615                                         iobuf.raw_flushing_ends_before = iobuf.out.pos + iobuf.out.len;
616
617                                         SIVAL(iobuf.out.buf + iobuf.raw_data_header_pos, 0,
618                                               ((MPLEX_BASE + (int)MSG_DATA)<<24) + iobuf.out.len - 4);
619                                         if ((val = iobuf.out.size - iobuf.raw_data_header_pos) < 4) {
620                                                 /* We used some of the overflow bytes, so move them. */
621                                                 if (DEBUG_GTE(IO, 4)) {
622                                                         rprintf(FINFO, "[%s] wrap-bytes moved: %d (perform_io)\n",
623                                                                 who_am_i(), (int)val);
624                                                 }
625                                                 memcpy(iobuf.out.buf, iobuf.out.buf + iobuf.out.size, 4 - val);
626                                         }
627
628                                         if (DEBUG_GTE(IO, 1)) {
629                                                 rprintf(FINFO, "[%s] send_msg(%d, %ld)\n",
630                                                         who_am_i(), (int)MSG_DATA, (long)iobuf.out.len - 4);
631                                         }
632
633                                         /* reserve room for the next MSG_DATA header */
634                                         iobuf.raw_data_header_pos = iobuf.raw_flushing_ends_before;
635                                         if (iobuf.raw_data_header_pos >= iobuf.out.size)
636                                                 iobuf.raw_data_header_pos -= iobuf.out.size;
637                                         iobuf.out.len += 4;
638                                 }
639
640                                 empty_buf_len = iobuf.out_empty_len;
641                                 out = &iobuf.out;
642                         } else if (iobuf.msg.len) {
643                                 empty_buf_len = 0;
644                                 out = &iobuf.msg;
645                         } else
646                                 out = NULL;
647                         if (out) {
648                                 FD_SET(iobuf.out_fd, &w_fds);
649                                 if (iobuf.out_fd > max_fd)
650                                         max_fd = iobuf.out_fd;
651                         }
652                 } else
653                         out = NULL;
654
655                 if (max_fd < 0) {
656                         switch (flags & PIO_NEED_FLAGS) {
657                         case PIO_NEED_INPUT:
658                                 rprintf(FERROR, "error in perform_io: no fd for input.\n");
659                                 exit_cleanup(RERR_PROTOCOL);
660                         case PIO_NEED_OUTROOM:
661                         case PIO_NEED_MSGROOM:
662                                 msgs2stderr = 1;
663                                 rprintf(FERROR, "error in perform_io: no fd for output.\n");
664                                 exit_cleanup(RERR_PROTOCOL);
665                         default:
666                                 /* No stated needs, so I guess this is OK. */
667                                 break;
668                         }
669                         break;
670                 }
671
672                 if (extra_flist_sending_enabled) {
673                         if (file_total - file_old_total < MAX_FILECNT_LOOKAHEAD
674                          && file_total - file_old_total >= MIN_FILECNT_LOOKAHEAD)
675                                 tv.tv_sec = 0;
676                         else {
677                                 extra_flist_sending_enabled = False;
678                                 tv.tv_sec = select_timeout;
679                         }
680                 } else
681                         tv.tv_sec = select_timeout;
682                 tv.tv_usec = 0;
683
684                 cnt = select(max_fd + 1, &r_fds, &w_fds, &e_fds, &tv);
685
686                 if (cnt <= 0) {
687                         if (cnt < 0 && errno == EBADF) {
688                                 msgs2stderr = 1;
689                                 exit_cleanup(RERR_SOCKETIO);
690                         }
691                         if (extra_flist_sending_enabled) {
692                                 extra_flist_sending_enabled = False;
693                                 send_extra_file_list(sock_f_out, -1);
694                                 extra_flist_sending_enabled = !flist_eof;
695                         } else
696                                 check_timeout();
697                         FD_ZERO(&r_fds); /* Just in case... */
698                         FD_ZERO(&w_fds);
699                 }
700
701                 if (iobuf.in_fd >= 0 && FD_ISSET(iobuf.in_fd, &r_fds)) {
702                         size_t pos = iobuf.in.pos + iobuf.in.len;
703                         size_t len = iobuf.in.size - pos;
704                         int n;
705                         if ((n = read(iobuf.in_fd, iobuf.in.buf + pos, len)) <= 0) {
706                                 if (n == 0) {
707                                         if (!read_batch || batch_fd < 0 || am_generator)
708                                                 whine_about_eof(iobuf.in_fd); /* Doesn't return. */
709                                         batch_fd = -1;
710                                         continue;
711                                 }
712                                 if (errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
713                                         n = 0;
714                                 else {
715                                         /* Don't write errors on a dead socket. */
716                                         if (iobuf.in_fd == sock_f_in) {
717                                                 if (am_sender)
718                                                         msgs2stderr = 1;
719                                                 rsyserr(FERROR_SOCKET, errno, "read error");
720                                         } else
721                                                 rsyserr(FERROR, errno, "read error");
722                                         exit_cleanup(RERR_STREAMIO);
723                                 }
724                         }
725                         if (msgs2stderr && DEBUG_GTE(IO, 2))
726                                 rprintf(FINFO, "[%s] recv=%ld\n", who_am_i(), (long)n);
727
728                         if (io_timeout)
729                                 last_io_in = time(NULL);
730                         stats.total_read += n;
731
732                         iobuf.in.len += n;
733                 }
734
735                 if (iobuf.out_fd >= 0 && FD_ISSET(iobuf.out_fd, &w_fds)) {
736                         size_t len = iobuf.raw_flushing_ends_before ? iobuf.raw_flushing_ends_before - out->pos : out->len;
737                         int n;
738
739                         if (bwlimit_writemax && len > bwlimit_writemax)
740                                 len = bwlimit_writemax;
741
742                         if (out->pos + len > out->size)
743                                 len = out->size - out->pos;
744                         if ((n = write(iobuf.out_fd, out->buf + out->pos, len)) <= 0) {
745                                 if (errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
746                                         n = 0;
747                                 else {
748                                         /* Don't write errors on a dead socket. */
749                                         msgs2stderr = 1;
750                                         out->len = iobuf.raw_flushing_ends_before = out->pos = 0;
751                                         rsyserr(FERROR_SOCKET, errno, "write error");
752                                         exit_cleanup(RERR_STREAMIO);
753                                 }
754                         }
755                         if (msgs2stderr && DEBUG_GTE(IO, 2)) {
756                                 rprintf(FINFO, "[%s] %s sent=%ld\n",
757                                         who_am_i(), out == &iobuf.out ? "out" : "msg", (long)n);
758                         }
759
760                         if (io_timeout)
761                                 last_io_out = time(NULL);
762                         stats.total_written += n;
763
764                         if (bwlimit_writemax)
765                                 sleep_for_bwlimit(n);
766
767                         if ((out->pos += n) == out->size) {
768                                 if (iobuf.raw_flushing_ends_before)
769                                         iobuf.raw_flushing_ends_before -= out->size;
770                                 out->pos = 0;
771                         }
772                         if (out->pos == iobuf.raw_flushing_ends_before)
773                                 iobuf.raw_flushing_ends_before = 0;
774                         if ((out->len -= n) == empty_buf_len) {
775                                 out->pos = 0;
776                                 if (empty_buf_len)
777                                         iobuf.raw_data_header_pos = 0;
778                         }
779                 }
780
781                 if (ff_forward_fd >= 0 && FD_ISSET(ff_forward_fd, &r_fds)) {
782                         /* This can potentially flush all output and enable
783                          * multiplexed output, so keep this last in the loop
784                          * and be sure to not cache anything that would break
785                          * such a change. */
786                         forward_filesfrom_data();
787                 }
788         }
789   double_break:
790
791         data = iobuf.in.buf + iobuf.in.pos;
792
793         if (flags & PIO_CONSUME_INPUT) {
794                 iobuf.in.len -= needed;
795                 iobuf.in.pos += needed;
796         }
797
798         return data;
799 }
800
801 /* Buffer a message for the multiplexed output stream.  Is never used for MSG_DATA. */
802 int send_msg(enum msgcode code, const char *buf, size_t len, int convert)
803 {
804         char *hdr;
805         size_t pos;
806         BOOL want_debug = DEBUG_GTE(IO, 1) && convert >= 0 && (msgs2stderr || code != MSG_INFO);
807
808         if (!OUT_MULTIPLEXED)
809                 return 0;
810
811         if (want_debug)
812                 rprintf(FINFO, "[%s] send_msg(%d, %ld)\n", who_am_i(), (int)code, (long)len);
813
814 #ifdef ICONV_OPTION
815         if (convert > 0 && ic_send == (iconv_t)-1)
816                 convert = 0;
817         if (convert > 0) {
818                 /* Ensuring double-size room leaves space for a potential conversion. */
819                 if (iobuf.msg.len + len*2 + 4 > iobuf.msg.size)
820                         perform_io(len*2 + 4, PIO_NEED_MSGROOM);
821         } else
822 #endif
823         if (iobuf.msg.len + len + 4 > iobuf.msg.size)
824                 perform_io(len + 4, PIO_NEED_MSGROOM);
825
826         pos = iobuf.msg.pos + iobuf.msg.len; /* Must be set after any flushing. */
827         if (pos >= iobuf.msg.size)
828                 pos -= iobuf.msg.size;
829         hdr = iobuf.msg.buf + pos;
830
831         iobuf.msg.len += 4; /* Leave room for the coming header bytes. */
832
833 #ifdef ICONV_OPTION
834         if (convert > 0) {
835                 xbuf inbuf;
836
837                 INIT_XBUF(inbuf, (char*)buf, len, (size_t)-1);
838
839                 len = iobuf.msg.len;
840                 iconvbufs(ic_send, &inbuf, &iobuf.msg,
841                           ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_CIRCULAR_OUT | ICB_INIT);
842                 if (inbuf.len > 0) {
843                         rprintf(FERROR, "overflowed iobuf.msg buffer in send_msg");
844                         exit_cleanup(RERR_UNSUPPORTED);
845                 }
846                 len = iobuf.msg.len - len;
847         } else
848 #endif
849         {
850                 size_t siz;
851
852                 if ((pos += 4) >= iobuf.msg.size)
853                         pos -= iobuf.msg.size;
854
855                 /* Handle a split copy if we wrap around the end of the circular buffer. */
856                 if (pos >= iobuf.msg.pos && (siz = iobuf.msg.size - pos) < len) {
857                         memcpy(iobuf.msg.buf + pos, buf, siz);
858                         memcpy(iobuf.msg.buf, buf + siz, len - siz);
859                 } else
860                         memcpy(iobuf.msg.buf + pos, buf, len);
861
862                 iobuf.msg.len += len;
863         }
864
865         SIVAL(hdr, 0, ((MPLEX_BASE + (int)code)<<24) + len);
866         /* If the header used any overflow bytes, move them to the start. */
867         if ((pos = hdr+4 - iobuf.msg.buf) > iobuf.msg.size) {
868                 size_t siz = pos - iobuf.msg.size;
869                 if (DEBUG_GTE(IO, 4))
870                         rprintf(FINFO, "[%s] wrap-bytes moved: %d (send_msg)\n", who_am_i(), (int)siz);
871                 memcpy(iobuf.msg.buf, hdr+4 - siz, siz);
872         }
873
874         if (want_debug && convert > 0)
875                 rprintf(FINFO, "[%s] converted msg len=%ld\n", who_am_i(), (long)len);
876
877         return 1;
878 }
879
880 void send_msg_int(enum msgcode code, int num)
881 {
882         char numbuf[4];
883
884         if (DEBUG_GTE(IO, 1))
885                 rprintf(FINFO, "[%s] send_msg_int(%d, %d)\n", who_am_i(), (int)code, num);
886
887         SIVAL(numbuf, 0, num);
888         send_msg(code, numbuf, 4, -1);
889 }
890
891 static void got_flist_entry_status(enum festatus status, int ndx)
892 {
893         struct file_list *flist = flist_for_ndx(ndx, "got_flist_entry_status");
894
895         if (remove_source_files) {
896                 active_filecnt--;
897                 active_bytecnt -= F_LENGTH(flist->files[ndx - flist->ndx_start]);
898         }
899
900         if (inc_recurse)
901                 flist->in_progress--;
902
903         switch (status) {
904         case FES_SUCCESS:
905                 if (remove_source_files)
906                         send_msg_int(MSG_SUCCESS, ndx);
907                 if (preserve_hard_links) {
908                         struct file_struct *file = flist->files[ndx - flist->ndx_start];
909                         if (F_IS_HLINKED(file)) {
910                                 flist_ndx_push(&hlink_list, ndx);
911                                 flist->in_progress++;
912                         }
913                 }
914                 break;
915         case FES_REDO:
916                 if (read_batch) {
917                         if (inc_recurse)
918                                 flist->in_progress++;
919                         break;
920                 }
921                 if (inc_recurse)
922                         flist->to_redo++;
923                 flist_ndx_push(&redo_list, ndx);
924                 break;
925         case FES_NO_SEND:
926                 break;
927         }
928 }
929
930 /* Note the fds used for the main socket (which might really be a pipe
931  * for a local transfer, but we can ignore that). */
932 void io_set_sock_fds(int f_in, int f_out)
933 {
934         sock_f_in = f_in;
935         sock_f_out = f_out;
936 }
937
938 void set_io_timeout(int secs)
939 {
940         io_timeout = secs;
941
942         if (!io_timeout || io_timeout > SELECT_TIMEOUT)
943                 select_timeout = SELECT_TIMEOUT;
944         else
945                 select_timeout = io_timeout;
946
947         allowed_lull = read_batch ? 0 : (io_timeout + 1) / 2;
948 }
949
950 static void check_for_d_option_error(const char *msg)
951 {
952         static char rsync263_opts[] = "BCDHIKLPRSTWabceghlnopqrtuvxz";
953         char *colon;
954         int saw_d = 0;
955
956         if (*msg != 'r'
957          || strncmp(msg, REMOTE_OPTION_ERROR, sizeof REMOTE_OPTION_ERROR - 1) != 0)
958                 return;
959
960         msg += sizeof REMOTE_OPTION_ERROR - 1;
961         if (*msg == '-' || (colon = strchr(msg, ':')) == NULL
962          || strncmp(colon, REMOTE_OPTION_ERROR2, sizeof REMOTE_OPTION_ERROR2 - 1) != 0)
963                 return;
964
965         for ( ; *msg != ':'; msg++) {
966                 if (*msg == 'd')
967                         saw_d = 1;
968                 else if (*msg == 'e')
969                         break;
970                 else if (strchr(rsync263_opts, *msg) == NULL)
971                         return;
972         }
973
974         if (saw_d) {
975                 rprintf(FWARNING,
976                     "*** Try using \"--old-d\" if remote rsync is <= 2.6.3 ***\n");
977         }
978 }
979
980 /* This is used by the generator to limit how many file transfers can
981  * be active at once when --remove-source-files is specified.  Without
982  * this, sender-side deletions were mostly happening at the end. */
983 void increment_active_files(int ndx, int itemizing, enum logcode code)
984 {
985         while (1) {
986                 /* TODO: tune these limits? */
987                 int limit = active_bytecnt >= 128*1024 ? 10 : 50;
988                 if (active_filecnt < limit)
989                         break;
990                 check_for_finished_files(itemizing, code, 0);
991                 if (active_filecnt < limit)
992                         break;
993                 wait_for_receiver();
994         }
995
996         active_filecnt++;
997         active_bytecnt += F_LENGTH(cur_flist->files[ndx - cur_flist->ndx_start]);
998 }
999
1000 int get_redo_num(void)
1001 {
1002         return flist_ndx_pop(&redo_list);
1003 }
1004
1005 int get_hlink_num(void)
1006 {
1007         return flist_ndx_pop(&hlink_list);
1008 }
1009
1010 /* When we're the receiver and we have a local --files-from list of names
1011  * that needs to be sent over the socket to the sender, we have to do two
1012  * things at the same time: send the sender a list of what files we're
1013  * processing and read the incoming file+info list from the sender.  We do
1014  * this by making recv_file_list() call forward_filesfrom_data(), which
1015  * will ensure that we forward data to the sender until we get some data
1016  * for recv_file_list() to use. */
1017 void start_filesfrom_forwarding(int fd)
1018 {
1019         ff_forward_fd = fd;
1020         if (protocol_version < 31) {
1021                 int save_fd = iobuf.out_fd;
1022                 /* Older protocols send the files-from data w/o packaging it in
1023                  * multiplexed I/O packets.  To match this, we temporarily turn
1024                  * off the multiplexing of our output w/o disabling buffering. */
1025                 assert(OUT_MULTIPLEXED);
1026                 /* Be extra, extra sure no messages go out before files-from data. */
1027                 iobuf.msg.pos = iobuf.msg.len = 0;
1028                 io_end_multiplex_out(False);
1029                 iobuf.out_fd = save_fd;
1030         }
1031
1032         alloc_xbuf(&ff_xb, FILESFROM_BUFLEN);
1033 }
1034
1035 /* Read a line into the "buf" buffer. */
1036 int read_line(int fd, char *buf, size_t bufsiz, int flags)
1037 {
1038         char ch, *s, *eob;
1039
1040 #ifdef ICONV_OPTION
1041         if (flags & RL_CONVERT && iconv_buf.size < bufsiz)
1042                 realloc_xbuf(&iconv_buf, bufsiz + 1024);
1043 #endif
1044
1045   start:
1046 #ifdef ICONV_OPTION
1047         s = flags & RL_CONVERT ? iconv_buf.buf : buf;
1048 #else
1049         s = buf;
1050 #endif
1051         eob = s + bufsiz - 1;
1052         while (1) {
1053                 /* We avoid read_byte() for files because files can return an EOF. */
1054                 if (fd == iobuf.in_fd)
1055                         ch = read_byte(fd);
1056                 else if (safe_read(fd, &ch, 1) == 0)
1057                         break;
1058                 if (flags & RL_EOL_NULLS ? ch == '\0' : (ch == '\r' || ch == '\n')) {
1059                         /* Skip empty lines if dumping comments. */
1060                         if (flags & RL_DUMP_COMMENTS && s == buf)
1061                                 continue;
1062                         break;
1063                 }
1064                 if (s < eob)
1065                         *s++ = ch;
1066         }
1067         *s = '\0';
1068
1069         if (flags & RL_DUMP_COMMENTS && (*buf == '#' || *buf == ';'))
1070                 goto start;
1071
1072 #ifdef ICONV_OPTION
1073         if (flags & RL_CONVERT) {
1074                 xbuf outbuf;
1075                 INIT_XBUF(outbuf, buf, 0, bufsiz);
1076                 iconv_buf.pos = 0;
1077                 iconv_buf.len = s - iconv_buf.buf;
1078                 iconvbufs(ic_recv, &iconv_buf, &outbuf,
1079                           ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_INIT);
1080                 outbuf.buf[outbuf.len] = '\0';
1081                 return outbuf.len;
1082         }
1083 #endif
1084
1085         return s - buf;
1086 }
1087
1088 void read_args(int f_in, char *mod_name, char *buf, size_t bufsiz, int rl_nulls,
1089                char ***argv_p, int *argc_p, char **request_p)
1090 {
1091         int maxargs = MAX_ARGS;
1092         int dot_pos = 0;
1093         int argc = 0;
1094         char **argv, *p;
1095         int rl_flags = (rl_nulls ? RL_EOL_NULLS : 0);
1096
1097 #ifdef ICONV_OPTION
1098         rl_flags |= (protect_args && ic_recv != (iconv_t)-1 ? RL_CONVERT : 0);
1099 #endif
1100
1101         if (!(argv = new_array(char *, maxargs)))
1102                 out_of_memory("read_args");
1103         if (mod_name && !protect_args)
1104                 argv[argc++] = "rsyncd";
1105
1106         while (1) {
1107                 if (read_line(f_in, buf, bufsiz, rl_flags) == 0)
1108                         break;
1109
1110                 if (argc == maxargs-1) {
1111                         maxargs += MAX_ARGS;
1112                         if (!(argv = realloc_array(argv, char *, maxargs)))
1113                                 out_of_memory("read_args");
1114                 }
1115
1116                 if (dot_pos) {
1117                         if (request_p) {
1118                                 *request_p = strdup(buf);
1119                                 request_p = NULL;
1120                         }
1121                         if (mod_name)
1122                                 glob_expand_module(mod_name, buf, &argv, &argc, &maxargs);
1123                         else
1124                                 glob_expand(buf, &argv, &argc, &maxargs);
1125                 } else {
1126                         if (!(p = strdup(buf)))
1127                                 out_of_memory("read_args");
1128                         argv[argc++] = p;
1129                         if (*p == '.' && p[1] == '\0')
1130                                 dot_pos = argc;
1131                 }
1132         }
1133         argv[argc] = NULL;
1134
1135         glob_expand(NULL, NULL, NULL, NULL);
1136
1137         *argc_p = argc;
1138         *argv_p = argv;
1139 }
1140
1141 int io_start_buffering_out(int f_out)
1142 {
1143         if (msgs2stderr && DEBUG_GTE(IO, 2))
1144                 rprintf(FINFO, "[%s] io_start_buffering_out(%d)\n", who_am_i(), f_out);
1145
1146         if (OUT_MULTIPLEXED && !iobuf.msg.buf) {
1147                 iobuf.msg.size = IO_BUFFER_SIZE - 4;
1148                 if (!(iobuf.msg.buf = new_array(char, iobuf.msg.size + 4)))
1149                         out_of_memory("io_start_buffering_out");
1150                 iobuf.msg.pos = iobuf.msg.len = 0;
1151         }
1152
1153         if (iobuf.out.buf) {
1154                 if (iobuf.out_fd == -1)
1155                         iobuf.out_fd = f_out;
1156                 assert(f_out == iobuf.out_fd);
1157                 return 0;
1158         }
1159
1160         iobuf.out.size = IO_BUFFER_SIZE * 2 - 4;
1161         /* The 4 overflow bytes makes some circular-buffer wrapping operations easier. */
1162         if (!(iobuf.out.buf = new_array(char, iobuf.out.size + 4)))
1163                 out_of_memory("io_start_buffering_out");
1164         iobuf.out.pos = iobuf.out.len = 0;
1165         iobuf.out_fd = f_out;
1166
1167         return 1;
1168 }
1169
1170 int io_start_buffering_in(int f_in)
1171 {
1172         if (msgs2stderr && DEBUG_GTE(IO, 2))
1173                 rprintf(FINFO, "[%s] io_start_buffering_in(%d)\n", who_am_i(), f_in);
1174
1175         if (iobuf.in.buf) {
1176                 if (iobuf.in_fd == -1)
1177                         iobuf.in_fd = f_in;
1178                 assert(f_in == iobuf.in_fd);
1179                 return 0;
1180         }
1181
1182         iobuf.in.size = IO_BUFFER_SIZE;
1183         if (!(iobuf.in.buf = new_array(char, iobuf.in.size)))
1184                 out_of_memory("io_start_buffering_in");
1185
1186         iobuf.in.pos = iobuf.in.len = 0;
1187
1188         iobuf.in_fd = f_in;
1189
1190         return 1;
1191 }
1192
1193 void io_end_buffering_in(BOOL free_buffers)
1194 {
1195         if (DEBUG_GTE(IO, 2)) {
1196                 rprintf(FINFO, "[%s] io_end_buffering_in(%s)\n",
1197                         who_am_i(), free_buffers ? "True" : "False");
1198         }
1199
1200         if (free_buffers)
1201                 free_xbuf(&iobuf.in);
1202         else
1203                 iobuf.in.pos = iobuf.in.len = 0;
1204
1205         iobuf.in_fd = -1;
1206 }
1207
1208 void io_end_buffering_out(BOOL free_buffers)
1209 {
1210         if (DEBUG_GTE(IO, 2)) {
1211                 rprintf(FINFO, "[%s] io_end_buffering_out(%s)\n",
1212                         who_am_i(), free_buffers ? "True" : "False");
1213         }
1214
1215         io_flush(FULL_FLUSH);
1216
1217         if (free_buffers) {
1218                 free_xbuf(&iobuf.out);
1219                 free_xbuf(&iobuf.msg);
1220         } else {
1221                 iobuf.out.pos = iobuf.out.len = 0;
1222                 iobuf.msg.pos = iobuf.msg.len = 0;
1223         }
1224
1225         iobuf.out_fd = -1;
1226 }
1227
1228 void maybe_flush_socket(int important)
1229 {
1230         if (flist_eof && iobuf.out.buf && iobuf.out.len > iobuf.out_empty_len
1231          && (important || time(NULL) - last_io_out >= 5))
1232                 io_flush(NORMAL_FLUSH);
1233 }
1234
1235 void maybe_send_keepalive(void)
1236 {
1237         if (time(NULL) - last_io_out >= allowed_lull) {
1238                 if (!iobuf.msg.len && iobuf.out.len == iobuf.out_empty_len) {
1239                         if (protocol_version < 29)
1240                                 return; /* there's nothing we can do */
1241                         if (protocol_version >= 30)
1242                                 send_msg(MSG_NOOP, "", 0, 0);
1243                         else {
1244                                 write_int(iobuf.out_fd, cur_flist->used);
1245                                 write_shortint(iobuf.out_fd, ITEM_IS_NEW);
1246                         }
1247                 }
1248                 if (iobuf.msg.len)
1249                         perform_io(iobuf.msg.size - iobuf.msg.len + 1, PIO_NEED_MSGROOM);
1250                 else if (iobuf.out.len > iobuf.out_empty_len)
1251                         io_flush(NORMAL_FLUSH);
1252         }
1253 }
1254
1255 void start_flist_forward(int ndx)
1256 {
1257         write_int(iobuf.out_fd, ndx);
1258         forward_flist_data = 1;
1259 }
1260
1261 void stop_flist_forward(void)
1262 {
1263         forward_flist_data = 0;
1264 }
1265
1266 /* Read a message from a multiplexed source. */
1267 static void read_a_msg(void)
1268 {
1269         char *data, line[BIGPATHBUFLEN];
1270         int tag;
1271         size_t msg_bytes;
1272
1273         data = perform_io(4, PIO_INPUT_AND_CONSUME);
1274         tag = IVAL(data, 0);
1275
1276         msg_bytes = tag & 0xFFFFFF;
1277         tag = (tag >> 24) - MPLEX_BASE;
1278
1279         if (DEBUG_GTE(IO, 1) && (msgs2stderr || tag != MSG_INFO))
1280                 rprintf(FINFO, "[%s] got msg=%d, len=%ld\n", who_am_i(), (int)tag, (long)msg_bytes);
1281
1282         switch (tag) {
1283         case MSG_DATA:
1284                 assert(iobuf.raw_input_ends_before == 0);
1285                 /* Though this does not yet read the data, we do mark where in
1286                  * the buffer the msg data will end once it is read.  It is
1287                  * possible that this points off the end of the buffer, in
1288                  * which case the gradual reading of the input stream will
1289                  * cause this value to decrease and eventually become real. */
1290                 iobuf.raw_input_ends_before = iobuf.in.pos + msg_bytes;
1291                 break;
1292         case MSG_STATS:
1293                 if (msg_bytes != sizeof stats.total_read || !am_generator)
1294                         goto invalid_msg;
1295                 data = perform_io(sizeof stats.total_read, PIO_INPUT_AND_CONSUME);
1296                 memcpy((char*)&stats.total_read, data, sizeof stats.total_read);
1297                 break;
1298         case MSG_REDO:
1299                 if (msg_bytes != 4 || !am_generator)
1300                         goto invalid_msg;
1301                 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1302                 got_flist_entry_status(FES_REDO, IVAL(data, 0));
1303                 break;
1304         case MSG_IO_ERROR:
1305                 if (msg_bytes != 4 || am_sender)
1306                         goto invalid_msg;
1307                 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1308                 io_error |= IVAL(data, 0);
1309                 if (!am_generator)
1310                         send_msg(MSG_IO_ERROR, data, 4, 0);
1311                 break;
1312         case MSG_NOOP:
1313                 if (am_sender)
1314                         maybe_send_keepalive();
1315                 break;
1316         case MSG_DELETED:
1317                 if (msg_bytes >= sizeof line)
1318                         goto overflow;
1319                 if (am_generator) {
1320                         memcpy(line, perform_io(msg_bytes, PIO_INPUT_AND_CONSUME), msg_bytes);
1321                         send_msg(MSG_DELETED, line, msg_bytes, 1);
1322                         break;
1323                 }
1324 #ifdef ICONV_OPTION
1325                 if (ic_recv != (iconv_t)-1) {
1326                         xbuf outbuf, inbuf;
1327                         char ibuf[512];
1328                         int add_null = 0;
1329                         int flags = ICB_INCLUDE_BAD | ICB_INIT;
1330
1331                         INIT_CONST_XBUF(outbuf, line);
1332                         INIT_XBUF(inbuf, ibuf, 0, (size_t)-1);
1333
1334                         while (msg_bytes) {
1335                                 size_t len = msg_bytes > sizeof ibuf - inbuf.len ? sizeof ibuf - inbuf.len : msg_bytes;
1336                                 memcpy(ibuf + inbuf.len, perform_io(len, PIO_INPUT_AND_CONSUME), len);
1337                                 inbuf.pos = 0;
1338                                 inbuf.len += len;
1339                                 if (!(msg_bytes -= len) && !ibuf[inbuf.len-1])
1340                                         inbuf.len--, add_null = 1;
1341                                 if (iconvbufs(ic_send, &inbuf, &outbuf, flags) < 0) {
1342                                         if (errno == E2BIG)
1343                                                 goto overflow;
1344                                         /* Buffer ended with an incomplete char, so move the
1345                                          * bytes to the start of the buffer and continue. */
1346                                         memmove(ibuf, ibuf + inbuf.pos, inbuf.len);
1347                                 }
1348                                 flags &= ~ICB_INIT;
1349                         }
1350                         if (add_null) {
1351                                 if (outbuf.len == outbuf.size)
1352                                         goto overflow;
1353                                 outbuf.buf[outbuf.len++] = '\0';
1354                         }
1355                         msg_bytes = outbuf.len;
1356                 } else
1357 #endif
1358                         memcpy(line, perform_io(msg_bytes, PIO_INPUT_AND_CONSUME), msg_bytes);
1359                 /* A directory name was sent with the trailing null */
1360                 if (msg_bytes > 0 && !line[msg_bytes-1])
1361                         log_delete(line, S_IFDIR);
1362                 else {
1363                         line[msg_bytes] = '\0';
1364                         log_delete(line, S_IFREG);
1365                 }
1366                 break;
1367         case MSG_SUCCESS:
1368                 if (msg_bytes != 4) {
1369                   invalid_msg:
1370                         rprintf(FERROR, "invalid multi-message %d:%lu [%s%s]\n",
1371                                 tag, (unsigned long)msg_bytes, who_am_i(),
1372                                 inc_recurse ? "/inc" : "");
1373                         exit_cleanup(RERR_STREAMIO);
1374                 }
1375                 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1376                 if (am_generator)
1377                         got_flist_entry_status(FES_SUCCESS, IVAL(data, 0));
1378                 else
1379                         successful_send(IVAL(data, 0));
1380                 break;
1381         case MSG_NO_SEND:
1382                 if (msg_bytes != 4)
1383                         goto invalid_msg;
1384                 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1385                 if (am_generator)
1386                         got_flist_entry_status(FES_NO_SEND, IVAL(data, 0));
1387                 else
1388                         send_msg(MSG_NO_SEND, data, 4, 0);
1389                 break;
1390         case MSG_ERROR_SOCKET:
1391         case MSG_ERROR_UTF8:
1392         case MSG_CLIENT:
1393         case MSG_LOG:
1394                 if (!am_generator)
1395                         goto invalid_msg;
1396                 if (tag == MSG_ERROR_SOCKET)
1397                         msgs2stderr = 1;
1398                 /* FALL THROUGH */
1399         case MSG_INFO:
1400         case MSG_ERROR:
1401         case MSG_ERROR_XFER:
1402         case MSG_WARNING:
1403                 if (msg_bytes >= sizeof line) {
1404                     overflow:
1405                         rprintf(FERROR,
1406                                 "multiplexing overflow %d:%lu [%s%s]\n",
1407                                 tag, (unsigned long)msg_bytes, who_am_i(),
1408                                 inc_recurse ? "/inc" : "");
1409                         exit_cleanup(RERR_STREAMIO);
1410                 }
1411                 memcpy(line, perform_io(msg_bytes, PIO_INPUT_AND_CONSUME), msg_bytes);
1412                 rwrite((enum logcode)tag, line, msg_bytes, !am_generator);
1413                 if (first_message) {
1414                         if (list_only && !am_sender && tag == 1 && msg_bytes < sizeof line) {
1415                                 line[msg_bytes] = '\0';
1416                                 check_for_d_option_error(line);
1417                         }
1418                         first_message = 0;
1419                 }
1420                 break;
1421         default:
1422                 rprintf(FERROR, "unexpected tag %d [%s%s]\n",
1423                         tag, who_am_i(), inc_recurse ? "/inc" : "");
1424                 exit_cleanup(RERR_STREAMIO);
1425         }
1426 }
1427
1428 void wait_for_receiver(void)
1429 {
1430         if (!iobuf.raw_input_ends_before)
1431                 read_a_msg();
1432
1433         if (iobuf.raw_input_ends_before) {
1434                 int ndx = read_int(iobuf.in_fd);
1435                 if (ndx < 0) {
1436                         switch (ndx) {
1437                         case NDX_FLIST_EOF:
1438                                 flist_eof = 1;
1439                                 if (DEBUG_GTE(FLIST, 3))
1440                                         rprintf(FINFO, "[%s] flist_eof=1\n", who_am_i());
1441                                 break;
1442                         case NDX_DONE:
1443                                 msgdone_cnt++;
1444                                 break;
1445                         default:
1446                                 exit_cleanup(RERR_STREAMIO);
1447                         }
1448                 } else {
1449                         struct file_list *flist;
1450                         if (DEBUG_GTE(FLIST, 2)) {
1451                                 rprintf(FINFO, "[%s] receiving flist for dir %d\n",
1452                                         who_am_i(), ndx);
1453                         }
1454                         flist = recv_file_list(iobuf.in_fd);
1455                         flist->parent_ndx = ndx;
1456 #ifdef SUPPORT_HARD_LINKS
1457                         if (preserve_hard_links)
1458                                 match_hard_links(flist);
1459 #endif
1460                 }
1461         }
1462 }
1463
1464 unsigned short read_shortint(int f)
1465 {
1466         char b[2];
1467         read_buf(f, b, 2);
1468         return (UVAL(b, 1) << 8) + UVAL(b, 0);
1469 }
1470
1471 int32 read_int(int f)
1472 {
1473         char b[4];
1474         int32 num;
1475
1476         read_buf(f, b, 4);
1477         num = IVAL(b, 0);
1478 #if SIZEOF_INT32 > 4
1479         if (num & (int32)0x80000000)
1480                 num |= ~(int32)0xffffffff;
1481 #endif
1482         return num;
1483 }
1484
1485 int32 read_varint(int f)
1486 {
1487         union {
1488                 char b[5];
1489                 int32 x;
1490         } u;
1491         uchar ch;
1492         int extra;
1493
1494         u.x = 0;
1495         ch = read_byte(f);
1496         extra = int_byte_extra[ch / 4];
1497         if (extra) {
1498                 uchar bit = ((uchar)1<<(8-extra));
1499                 if (extra >= (int)sizeof u.b) {
1500                         rprintf(FERROR, "Overflow in read_varint()\n");
1501                         exit_cleanup(RERR_STREAMIO);
1502                 }
1503                 read_buf(f, u.b, extra);
1504                 u.b[extra] = ch & (bit-1);
1505         } else
1506                 u.b[0] = ch;
1507 #if CAREFUL_ALIGNMENT
1508         u.x = IVAL(u.b,0);
1509 #endif
1510 #if SIZEOF_INT32 > 4
1511         if (u.x & (int32)0x80000000)
1512                 u.x |= ~(int32)0xffffffff;
1513 #endif
1514         return u.x;
1515 }
1516
1517 int64 read_varlong(int f, uchar min_bytes)
1518 {
1519         union {
1520                 char b[9];
1521                 int64 x;
1522         } u;
1523         char b2[8];
1524         int extra;
1525
1526 #if SIZEOF_INT64 < 8
1527         memset(u.b, 0, 8);
1528 #else
1529         u.x = 0;
1530 #endif
1531         read_buf(f, b2, min_bytes);
1532         memcpy(u.b, b2+1, min_bytes-1);
1533         extra = int_byte_extra[CVAL(b2, 0) / 4];
1534         if (extra) {
1535                 uchar bit = ((uchar)1<<(8-extra));
1536                 if (min_bytes + extra > (int)sizeof u.b) {
1537                         rprintf(FERROR, "Overflow in read_varlong()\n");
1538                         exit_cleanup(RERR_STREAMIO);
1539                 }
1540                 read_buf(f, u.b + min_bytes - 1, extra);
1541                 u.b[min_bytes + extra - 1] = CVAL(b2, 0) & (bit-1);
1542 #if SIZEOF_INT64 < 8
1543                 if (min_bytes + extra > 5 || u.b[4] || CVAL(u.b,3) & 0x80) {
1544                         rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1545                         exit_cleanup(RERR_UNSUPPORTED);
1546                 }
1547 #endif
1548         } else
1549                 u.b[min_bytes + extra - 1] = CVAL(b2, 0);
1550 #if SIZEOF_INT64 < 8
1551         u.x = IVAL(u.b,0);
1552 #elif CAREFUL_ALIGNMENT
1553         u.x = IVAL(u.b,0) | (((int64)IVAL(u.b,4))<<32);
1554 #endif
1555         return u.x;
1556 }
1557
1558 int64 read_longint(int f)
1559 {
1560 #if SIZEOF_INT64 >= 8
1561         char b[9];
1562 #endif
1563         int32 num = read_int(f);
1564
1565         if (num != (int32)0xffffffff)
1566                 return num;
1567
1568 #if SIZEOF_INT64 < 8
1569         rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1570         exit_cleanup(RERR_UNSUPPORTED);
1571 #else
1572         read_buf(f, b, 8);
1573         return IVAL(b,0) | (((int64)IVAL(b,4))<<32);
1574 #endif
1575 }
1576
1577 void read_buf(int f, char *buf, size_t len)
1578 {
1579         if (f != iobuf.in_fd) {
1580                 if (safe_read(f, buf, len) != len)
1581                         whine_about_eof(f); /* Doesn't return. */
1582                 goto batch_copy;
1583         }
1584
1585         if (!IN_MULTIPLEXED) {
1586                 memcpy(buf, perform_io(len, PIO_INPUT_AND_CONSUME), len);
1587                 if (forward_flist_data)
1588                         write_buf(iobuf.out_fd, buf, len);
1589           batch_copy:
1590                 if (f == write_batch_monitor_in)
1591                         safe_write(batch_fd, buf, len);
1592                 return;
1593         }
1594
1595         while (1) {
1596                 char *data;
1597                 size_t siz;
1598
1599                 while (!iobuf.raw_input_ends_before)
1600                         read_a_msg();
1601
1602                 siz = MIN(len, iobuf.raw_input_ends_before - iobuf.in.pos);
1603                 data = perform_io(siz, PIO_INPUT_AND_CONSUME);
1604                 if (iobuf.in.pos == iobuf.raw_input_ends_before)
1605                         iobuf.raw_input_ends_before = 0;
1606
1607                 /* The bytes at the "data" pointer will survive long
1608                  * enough to make a copy, but not past future I/O. */
1609                 memcpy(buf, data, siz);
1610
1611                 if (forward_flist_data)
1612                         write_buf(iobuf.out_fd, buf, siz);
1613
1614                 if (f == write_batch_monitor_in)
1615                         safe_write(batch_fd, buf, siz);
1616
1617                 if ((len -= siz) == 0)
1618                         break;
1619                 buf += siz;
1620         }
1621 }
1622
1623 void read_sbuf(int f, char *buf, size_t len)
1624 {
1625         read_buf(f, buf, len);
1626         buf[len] = '\0';
1627 }
1628
1629 uchar read_byte(int f)
1630 {
1631         uchar c;
1632         read_buf(f, (char*)&c, 1);
1633         return c;
1634 }
1635
1636 int read_vstring(int f, char *buf, int bufsize)
1637 {
1638         int len = read_byte(f);
1639
1640         if (len & 0x80)
1641                 len = (len & ~0x80) * 0x100 + read_byte(f);
1642
1643         if (len >= bufsize) {
1644                 rprintf(FERROR, "over-long vstring received (%d > %d)\n",
1645                         len, bufsize - 1);
1646                 return -1;
1647         }
1648
1649         if (len)
1650                 read_buf(f, buf, len);
1651         buf[len] = '\0';
1652         return len;
1653 }
1654
1655 /* Populate a sum_struct with values from the socket.  This is
1656  * called by both the sender and the receiver. */
1657 void read_sum_head(int f, struct sum_struct *sum)
1658 {
1659         int32 max_blength = protocol_version < 30 ? OLD_MAX_BLOCK_SIZE : MAX_BLOCK_SIZE;
1660         sum->count = read_int(f);
1661         if (sum->count < 0) {
1662                 rprintf(FERROR, "Invalid checksum count %ld [%s]\n",
1663                         (long)sum->count, who_am_i());
1664                 exit_cleanup(RERR_PROTOCOL);
1665         }
1666         sum->blength = read_int(f);
1667         if (sum->blength < 0 || sum->blength > max_blength) {
1668                 rprintf(FERROR, "Invalid block length %ld [%s]\n",
1669                         (long)sum->blength, who_am_i());
1670                 exit_cleanup(RERR_PROTOCOL);
1671         }
1672         sum->s2length = protocol_version < 27 ? csum_length : (int)read_int(f);
1673         if (sum->s2length < 0 || sum->s2length > MAX_DIGEST_LEN) {
1674                 rprintf(FERROR, "Invalid checksum length %d [%s]\n",
1675                         sum->s2length, who_am_i());
1676                 exit_cleanup(RERR_PROTOCOL);
1677         }
1678         sum->remainder = read_int(f);
1679         if (sum->remainder < 0 || sum->remainder > sum->blength) {
1680                 rprintf(FERROR, "Invalid remainder length %ld [%s]\n",
1681                         (long)sum->remainder, who_am_i());
1682                 exit_cleanup(RERR_PROTOCOL);
1683         }
1684 }
1685
1686 /* Send the values from a sum_struct over the socket.  Set sum to
1687  * NULL if there are no checksums to send.  This is called by both
1688  * the generator and the sender. */
1689 void write_sum_head(int f, struct sum_struct *sum)
1690 {
1691         static struct sum_struct null_sum;
1692
1693         if (sum == NULL)
1694                 sum = &null_sum;
1695
1696         write_int(f, sum->count);
1697         write_int(f, sum->blength);
1698         if (protocol_version >= 27)
1699                 write_int(f, sum->s2length);
1700         write_int(f, sum->remainder);
1701 }
1702
1703 /* Sleep after writing to limit I/O bandwidth usage.
1704  *
1705  * @todo Rather than sleeping after each write, it might be better to
1706  * use some kind of averaging.  The current algorithm seems to always
1707  * use a bit less bandwidth than specified, because it doesn't make up
1708  * for slow periods.  But arguably this is a feature.  In addition, we
1709  * ought to take the time used to write the data into account.
1710  *
1711  * During some phases of big transfers (file FOO is uptodate) this is
1712  * called with a small bytes_written every time.  As the kernel has to
1713  * round small waits up to guarantee that we actually wait at least the
1714  * requested number of microseconds, this can become grossly inaccurate.
1715  * We therefore keep track of the bytes we've written over time and only
1716  * sleep when the accumulated delay is at least 1 tenth of a second. */
1717 static void sleep_for_bwlimit(int bytes_written)
1718 {
1719         static struct timeval prior_tv;
1720         static long total_written = 0;
1721         struct timeval tv, start_tv;
1722         long elapsed_usec, sleep_usec;
1723
1724 #define ONE_SEC 1000000L /* # of microseconds in a second */
1725
1726         total_written += bytes_written;
1727
1728         gettimeofday(&start_tv, NULL);
1729         if (prior_tv.tv_sec) {
1730                 elapsed_usec = (start_tv.tv_sec - prior_tv.tv_sec) * ONE_SEC
1731                              + (start_tv.tv_usec - prior_tv.tv_usec);
1732                 total_written -= elapsed_usec * bwlimit / (ONE_SEC/1024);
1733                 if (total_written < 0)
1734                         total_written = 0;
1735         }
1736
1737         sleep_usec = total_written * (ONE_SEC/1024) / bwlimit;
1738         if (sleep_usec < ONE_SEC / 10) {
1739                 prior_tv = start_tv;
1740                 return;
1741         }
1742
1743         tv.tv_sec  = sleep_usec / ONE_SEC;
1744         tv.tv_usec = sleep_usec % ONE_SEC;
1745         select(0, NULL, NULL, NULL, &tv);
1746
1747         gettimeofday(&prior_tv, NULL);
1748         elapsed_usec = (prior_tv.tv_sec - start_tv.tv_sec) * ONE_SEC
1749                      + (prior_tv.tv_usec - start_tv.tv_usec);
1750         total_written = (sleep_usec - elapsed_usec) * bwlimit / (ONE_SEC/1024);
1751 }
1752
1753 void io_flush(int flush_it_all)
1754 {
1755         if (iobuf.out.len > iobuf.out_empty_len) {
1756                 if (flush_it_all) /* FULL_FLUSH: flush everything in the output buffers */
1757                         perform_io(iobuf.out.size - iobuf.out_empty_len, PIO_NEED_OUTROOM);
1758                 else /* NORMAL_FLUSH: flush at least 1 byte */
1759                         perform_io(iobuf.out.size - iobuf.out.len + 1, PIO_NEED_OUTROOM);
1760         }
1761         if (iobuf.msg.len)
1762                 perform_io(iobuf.msg.size, PIO_NEED_MSGROOM);
1763 }
1764
1765 void write_shortint(int f, unsigned short x)
1766 {
1767         char b[2];
1768         b[0] = (char)x;
1769         b[1] = (char)(x >> 8);
1770         write_buf(f, b, 2);
1771 }
1772
1773 void write_int(int f, int32 x)
1774 {
1775         char b[4];
1776         SIVAL(b, 0, x);
1777         write_buf(f, b, 4);
1778 }
1779
1780 void write_varint(int f, int32 x)
1781 {
1782         char b[5];
1783         uchar bit;
1784         int cnt = 4;
1785
1786         SIVAL(b, 1, x);
1787
1788         while (cnt > 1 && b[cnt] == 0)
1789                 cnt--;
1790         bit = ((uchar)1<<(7-cnt+1));
1791         if (CVAL(b, cnt) >= bit) {
1792                 cnt++;
1793                 *b = ~(bit-1);
1794         } else if (cnt > 1)
1795                 *b = b[cnt] | ~(bit*2-1);
1796         else
1797                 *b = b[cnt];
1798
1799         write_buf(f, b, cnt);
1800 }
1801
1802 void write_varlong(int f, int64 x, uchar min_bytes)
1803 {
1804         char b[9];
1805         uchar bit;
1806         int cnt = 8;
1807
1808         SIVAL(b, 1, x);
1809 #if SIZEOF_INT64 >= 8
1810         SIVAL(b, 5, x >> 32);
1811 #else
1812         if (x <= 0x7FFFFFFF && x >= 0)
1813                 memset(b + 5, 0, 4);
1814         else {
1815                 rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1816                 exit_cleanup(RERR_UNSUPPORTED);
1817         }
1818 #endif
1819
1820         while (cnt > min_bytes && b[cnt] == 0)
1821                 cnt--;
1822         bit = ((uchar)1<<(7-cnt+min_bytes));
1823         if (CVAL(b, cnt) >= bit) {
1824                 cnt++;
1825                 *b = ~(bit-1);
1826         } else if (cnt > min_bytes)
1827                 *b = b[cnt] | ~(bit*2-1);
1828         else
1829                 *b = b[cnt];
1830
1831         write_buf(f, b, cnt);
1832 }
1833
1834 /*
1835  * Note: int64 may actually be a 32-bit type if ./configure couldn't find any
1836  * 64-bit types on this platform.
1837  */
1838 void write_longint(int f, int64 x)
1839 {
1840         char b[12], * const s = b+4;
1841
1842         SIVAL(s, 0, x);
1843         if (x <= 0x7FFFFFFF && x >= 0) {
1844                 write_buf(f, s, 4);
1845                 return;
1846         }
1847
1848 #if SIZEOF_INT64 < 8
1849         rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1850         exit_cleanup(RERR_UNSUPPORTED);
1851 #else
1852         memset(b, 0xFF, 4);
1853         SIVAL(s, 4, x >> 32);
1854         write_buf(f, b, 12);
1855 #endif
1856 }
1857
1858 void write_buf(int f, const char *buf, size_t len)
1859 {
1860         size_t pos, siz;
1861
1862         if (f != iobuf.out_fd) {
1863                 safe_write(f, buf, len);
1864                 goto batch_copy;
1865         }
1866
1867         if (iobuf.out.size - iobuf.out.len < len)
1868                 perform_io(len, PIO_NEED_OUTROOM);
1869
1870         pos = iobuf.out.pos + iobuf.out.len; /* Must be set after any flushing. */
1871         if (pos >= iobuf.out.size)
1872                 pos -= iobuf.out.size;
1873
1874         /* Handle a split copy if we wrap around the end of the circular buffer. */
1875         if (pos >= iobuf.out.pos && (siz = iobuf.out.size - pos) < len) {
1876                 memcpy(iobuf.out.buf + pos, buf, siz);
1877                 memcpy(iobuf.out.buf, buf + siz, len - siz);
1878         } else
1879                 memcpy(iobuf.out.buf + pos, buf, len);
1880
1881         iobuf.out.len += len;
1882
1883   batch_copy:
1884         if (f == write_batch_monitor_out)
1885                 safe_write(batch_fd, buf, len);
1886 }
1887
1888 /* Write a string to the connection */
1889 void write_sbuf(int f, const char *buf)
1890 {
1891         write_buf(f, buf, strlen(buf));
1892 }
1893
1894 void write_byte(int f, uchar c)
1895 {
1896         write_buf(f, (char *)&c, 1);
1897 }
1898
1899 void write_vstring(int f, const char *str, int len)
1900 {
1901         uchar lenbuf[3], *lb = lenbuf;
1902
1903         if (len > 0x7F) {
1904                 if (len > 0x7FFF) {
1905                         rprintf(FERROR,
1906                                 "attempting to send over-long vstring (%d > %d)\n",
1907                                 len, 0x7FFF);
1908                         exit_cleanup(RERR_PROTOCOL);
1909                 }
1910                 *lb++ = len / 0x100 + 0x80;
1911         }
1912         *lb = len;
1913
1914         write_buf(f, (char*)lenbuf, lb - lenbuf + 1);
1915         if (len)
1916                 write_buf(f, str, len);
1917 }
1918
1919 /* Send a file-list index using a byte-reduction method. */
1920 void write_ndx(int f, int32 ndx)
1921 {
1922         static int32 prev_positive = -1, prev_negative = 1;
1923         int32 diff, cnt = 0;
1924         char b[6];
1925
1926         if (protocol_version < 30 || read_batch) {
1927                 write_int(f, ndx);
1928                 return;
1929         }
1930
1931         /* Send NDX_DONE as a single-byte 0 with no side effects.  Send
1932          * negative nums as a positive after sending a leading 0xFF. */
1933         if (ndx >= 0) {
1934                 diff = ndx - prev_positive;
1935                 prev_positive = ndx;
1936         } else if (ndx == NDX_DONE) {
1937                 *b = 0;
1938                 write_buf(f, b, 1);
1939                 return;
1940         } else {
1941                 b[cnt++] = (char)0xFF;
1942                 ndx = -ndx;
1943                 diff = ndx - prev_negative;
1944                 prev_negative = ndx;
1945         }
1946
1947         /* A diff of 1 - 253 is sent as a one-byte diff; a diff of 254 - 32767
1948          * or 0 is sent as a 0xFE + a two-byte diff; otherwise we send 0xFE
1949          * & all 4 bytes of the (non-negative) num with the high-bit set. */
1950         if (diff < 0xFE && diff > 0)
1951                 b[cnt++] = (char)diff;
1952         else if (diff < 0 || diff > 0x7FFF) {
1953                 b[cnt++] = (char)0xFE;
1954                 b[cnt++] = (char)((ndx >> 24) | 0x80);
1955                 b[cnt++] = (char)ndx;
1956                 b[cnt++] = (char)(ndx >> 8);
1957                 b[cnt++] = (char)(ndx >> 16);
1958         } else {
1959                 b[cnt++] = (char)0xFE;
1960                 b[cnt++] = (char)(diff >> 8);
1961                 b[cnt++] = (char)diff;
1962         }
1963         write_buf(f, b, cnt);
1964 }
1965
1966 /* Receive a file-list index using a byte-reduction method. */
1967 int32 read_ndx(int f)
1968 {
1969         static int32 prev_positive = -1, prev_negative = 1;
1970         int32 *prev_ptr, num;
1971         char b[4];
1972
1973         if (protocol_version < 30)
1974                 return read_int(f);
1975
1976         read_buf(f, b, 1);
1977         if (CVAL(b, 0) == 0xFF) {
1978                 read_buf(f, b, 1);
1979                 prev_ptr = &prev_negative;
1980         } else if (CVAL(b, 0) == 0)
1981                 return NDX_DONE;
1982         else
1983                 prev_ptr = &prev_positive;
1984         if (CVAL(b, 0) == 0xFE) {
1985                 read_buf(f, b, 2);
1986                 if (CVAL(b, 0) & 0x80) {
1987                         b[3] = CVAL(b, 0) & ~0x80;
1988                         b[0] = b[1];
1989                         read_buf(f, b+1, 2);
1990                         num = IVAL(b, 0);
1991                 } else
1992                         num = (UVAL(b,0)<<8) + UVAL(b,1) + *prev_ptr;
1993         } else
1994                 num = UVAL(b, 0) + *prev_ptr;
1995         *prev_ptr = num;
1996         if (prev_ptr == &prev_negative)
1997                 num = -num;
1998         return num;
1999 }
2000
2001 /* Read a line of up to bufsiz-1 characters into buf.  Strips
2002  * the (required) trailing newline and all carriage returns.
2003  * Returns 1 for success; 0 for I/O error or truncation. */
2004 int read_line_old(int fd, char *buf, size_t bufsiz)
2005 {
2006         bufsiz--; /* leave room for the null */
2007         while (bufsiz > 0) {
2008                 assert(fd != iobuf.in_fd);
2009                 if (safe_read(fd, buf, 1) == 0)
2010                         return 0;
2011                 if (*buf == '\0')
2012                         return 0;
2013                 if (*buf == '\n')
2014                         break;
2015                 if (*buf != '\r') {
2016                         buf++;
2017                         bufsiz--;
2018                 }
2019         }
2020         *buf = '\0';
2021         return bufsiz > 0;
2022 }
2023
2024 void io_printf(int fd, const char *format, ...)
2025 {
2026         va_list ap;
2027         char buf[BIGPATHBUFLEN];
2028         int len;
2029
2030         va_start(ap, format);
2031         len = vsnprintf(buf, sizeof buf, format, ap);
2032         va_end(ap);
2033
2034         if (len < 0)
2035                 exit_cleanup(RERR_STREAMIO);
2036
2037         if (len > (int)sizeof buf) {
2038                 rprintf(FERROR, "io_printf() was too long for the buffer.\n");
2039                 exit_cleanup(RERR_STREAMIO);
2040         }
2041
2042         write_sbuf(fd, buf);
2043 }
2044
2045 /* Setup for multiplexing a MSG_* stream with the data stream. */
2046 void io_start_multiplex_out(int fd)
2047 {
2048         if (msgs2stderr && DEBUG_GTE(IO, 2))
2049                 rprintf(FINFO, "[%s] io_start_multiplex_out(%d)\n", who_am_i(), fd);
2050
2051         io_flush(FULL_FLUSH);
2052
2053         iobuf.out_empty_len = 4; /* See also OUT_MULTIPLEXED */
2054         io_start_buffering_out(fd);
2055
2056         iobuf.raw_data_header_pos = iobuf.out.pos + iobuf.out.len;
2057         iobuf.out.len += 4;
2058 }
2059
2060 /* Setup for multiplexing a MSG_* stream with the data stream. */
2061 void io_start_multiplex_in(int fd)
2062 {
2063         if (msgs2stderr && DEBUG_GTE(IO, 2))
2064                 rprintf(FINFO, "[%s] io_start_multiplex_in(%d)\n", who_am_i(), fd);
2065
2066         iobuf.in_multiplexed = True; /* See also IN_MULTIPLEXED */
2067         io_start_buffering_in(fd);
2068 }
2069
2070 void io_end_multiplex_in(BOOL free_buffers)
2071 {
2072         if (DEBUG_GTE(IO, 2)) {
2073                 rprintf(FINFO, "[%s] io_end_multiplex_in(%s)\n",
2074                         who_am_i(), free_buffers ? "True" : "False");
2075         }
2076
2077         iobuf.in_multiplexed = False;
2078         iobuf.raw_input_ends_before = 0;
2079         io_end_buffering_in(free_buffers);
2080 }
2081
2082 /* Stop output multiplexing. */
2083 void io_end_multiplex_out(BOOL free_buffers)
2084 {
2085         if (DEBUG_GTE(IO, 2)) {
2086                 rprintf(FINFO, "[%s] io_end_multiplex_out(%s)\n",
2087                         who_am_i(), free_buffers ? "True" : "False");
2088         }
2089
2090         io_end_buffering_out(free_buffers);
2091         iobuf.out_empty_len = 0;
2092 }
2093
2094 void start_write_batch(int fd)
2095 {
2096         /* Some communication has already taken place, but we don't
2097          * enable batch writing until here so that we can write a
2098          * canonical record of the communication even though the
2099          * actual communication so far depends on whether a daemon
2100          * is involved. */
2101         write_int(batch_fd, protocol_version);
2102         if (protocol_version >= 30)
2103                 write_byte(batch_fd, inc_recurse);
2104         write_int(batch_fd, checksum_seed);
2105
2106         if (am_sender)
2107                 write_batch_monitor_out = fd;
2108         else
2109                 write_batch_monitor_in = fd;
2110 }
2111
2112 void stop_write_batch(void)
2113 {
2114         write_batch_monitor_out = -1;
2115         write_batch_monitor_in = -1;
2116 }