Save first filename and linenum in case exit_cleanup() recurses.
[rsync/rsync.git] / io.c
1 /*
2  * Socket and pipe I/O utilities used in rsync.
3  *
4  * Copyright (C) 1996-2001 Andrew Tridgell
5  * Copyright (C) 1996 Paul Mackerras
6  * Copyright (C) 2001, 2002 Martin Pool <mbp@samba.org>
7  * Copyright (C) 2003-2009 Wayne Davison
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License as published by
11  * the Free Software Foundation; either version 3 of the License, or
12  * (at your option) any later version.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  * GNU General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License along
20  * with this program; if not, visit the http://fsf.org website.
21  */
22
23 /* Rsync provides its own multiplexing system, which is used to send
24  * stderr and stdout over a single socket.
25  *
26  * For historical reasons this is off during the start of the
27  * connection, but it's switched on quite early using
28  * io_start_multiplex_out() and io_start_multiplex_in(). */
29
30 #include "rsync.h"
31 #include "ifuncs.h"
32 #include "inums.h"
33
34 /** If no timeout is specified then use a 60 second select timeout */
35 #define SELECT_TIMEOUT 60
36
37 extern int bwlimit;
38 extern size_t bwlimit_writemax;
39 extern int io_timeout;
40 extern int am_server;
41 extern int am_daemon;
42 extern int am_sender;
43 extern int am_generator;
44 extern int msgs2stderr;
45 extern int inc_recurse;
46 extern int io_error;
47 extern int eol_nulls;
48 extern int flist_eof;
49 extern int file_total;
50 extern int file_old_total;
51 extern int list_only;
52 extern int read_batch;
53 extern int protect_args;
54 extern int checksum_seed;
55 extern int protocol_version;
56 extern int remove_source_files;
57 extern int preserve_hard_links;
58 extern BOOL extra_flist_sending_enabled;
59 extern struct stats stats;
60 extern struct file_list *cur_flist;
61 #ifdef ICONV_OPTION
62 extern int filesfrom_convert;
63 extern iconv_t ic_send, ic_recv;
64 #endif
65
66 int csum_length = SHORT_SUM_LENGTH; /* initial value */
67 int allowed_lull = 0;
68 int ignore_timeout = 0;
69 int batch_fd = -1;
70 int msgdone_cnt = 0;
71 int forward_flist_data = 0;
72
73 /* Ignore an EOF error if non-zero. See whine_about_eof(). */
74 int kluge_around_eof = 0;
75
76 int sock_f_in = -1;
77 int sock_f_out = -1;
78
79 int64 total_data_read = 0;
80 int64 total_data_written = 0;
81
82 static struct {
83         xbuf in, out, msg;
84         int in_fd;
85         int out_fd; /* Both "out" and "msg" go to this fd. */
86         BOOL in_multiplexed;
87         unsigned out_empty_len;
88         size_t raw_data_header_pos;      /* in the out xbuf */
89         size_t raw_flushing_ends_before; /* in the out xbuf */
90         size_t raw_input_ends_before;    /* in the in xbuf */
91 } iobuf = { .in_fd = -1, .out_fd = -1 };
92
93 static time_t last_io_in;
94 static time_t last_io_out;
95
96 static int write_batch_monitor_in = -1;
97 static int write_batch_monitor_out = -1;
98
99 static int ff_forward_fd = -1;
100 static int ff_reenable_multiplex = -1;
101 static char ff_lastchar = '\0';
102 static xbuf ff_xb = EMPTY_XBUF;
103 #ifdef ICONV_OPTION
104 static xbuf iconv_buf = EMPTY_XBUF;
105 #endif
106 static int select_timeout = SELECT_TIMEOUT;
107 static int active_filecnt = 0;
108 static OFF_T active_bytecnt = 0;
109 static int first_message = 1;
110
111 static char int_byte_extra[64] = {
112         0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* (00 - 3F)/4 */
113         0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* (40 - 7F)/4 */
114         1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* (80 - BF)/4 */
115         2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 5, 6, /* (C0 - FF)/4 */
116 };
117
118 #define IN_MULTIPLEXED (iobuf.in_multiplexed)
119 #define OUT_MULTIPLEXED (iobuf.out_empty_len != 0)
120
121 #define PIO_NEED_INPUT (1<<0) /* The *_NEED_* flags are mutually exclusive. */
122 #define PIO_NEED_OUTROOM (1<<1)
123 #define PIO_NEED_MSGROOM (1<<2)
124
125 #define PIO_CONSUME_INPUT (1<<4) /* Must becombined with PIO_NEED_INPUT. */
126
127 #define PIO_INPUT_AND_CONSUME (PIO_NEED_INPUT | PIO_CONSUME_INPUT)
128 #define PIO_NEED_FLAGS (PIO_NEED_INPUT | PIO_NEED_OUTROOM | PIO_NEED_MSGROOM)
129
130 #define REMOTE_OPTION_ERROR "rsync: on remote machine: -"
131 #define REMOTE_OPTION_ERROR2 ": unknown option"
132
133 #define FILESFROM_BUFLEN 2048
134
135 enum festatus { FES_SUCCESS, FES_REDO, FES_NO_SEND };
136
137 static flist_ndx_list redo_list, hlink_list;
138
139 static void sleep_for_bwlimit(int bytes_written);
140
141 static void check_timeout(void)
142 {
143         time_t t;
144
145         if (!io_timeout || ignore_timeout)
146                 return;
147
148         if (!last_io_in) {
149                 last_io_in = time(NULL);
150                 return;
151         }
152
153         t = time(NULL);
154
155         if (t - last_io_in >= io_timeout) {
156                 if (!am_server && !am_daemon) {
157                         rprintf(FERROR, "io timeout after %d seconds -- exiting\n",
158                                 (int)(t-last_io_in));
159                 }
160                 exit_cleanup(RERR_TIMEOUT);
161         }
162 }
163
164 /* It's almost always an error to get an EOF when we're trying to read from the
165  * network, because the protocol is (for the most part) self-terminating.
166  *
167  * There is one case for the receiver when it is at the end of the transfer
168  * (hanging around reading any keep-alive packets that might come its way): if
169  * the sender dies before the generator's kill-signal comes through, we can end
170  * up here needing to loop until the kill-signal arrives.  In this situation,
171  * kluge_around_eof will be < 0.
172  *
173  * There is another case for older protocol versions (< 24) where the module
174  * listing was not terminated, so we must ignore an EOF error in that case and
175  * exit.  In this situation, kluge_around_eof will be > 0. */
176 static NORETURN void whine_about_eof(int fd)
177 {
178         if (kluge_around_eof && fd == sock_f_in) {
179                 int i;
180                 if (kluge_around_eof > 0)
181                         exit_cleanup(0);
182                 /* If we're still here after 10 seconds, exit with an error. */
183                 for (i = 10*1000/20; i--; )
184                         msleep(20);
185         }
186
187         rprintf(FERROR, RSYNC_NAME ": connection unexpectedly closed "
188                 "(%s bytes received so far) [%s]\n",
189                 big_num(stats.total_read), who_am_i());
190
191         exit_cleanup(RERR_STREAMIO);
192 }
193
194 /* Do a safe read, handling any needed looping and error handling.
195  * Returns the count of the bytes read, which will only be different
196  * from "len" if we encountered an EOF.  This routine is not used on
197  * the socket except very early in the transfer. */
198 static size_t safe_read(int fd, char *buf, size_t len)
199 {
200         size_t got;
201         int n;
202
203         assert(fd != iobuf.in_fd);
204
205         n = read(fd, buf, len);
206         if ((size_t)n == len || n == 0) {
207                 if (DEBUG_GTE(IO, 2))
208                         rprintf(FINFO, "[%s] safe_read(%d)=%ld\n", who_am_i(), fd, (long)n);
209                 return n;
210         }
211         if (n < 0) {
212                 if (errno != EINTR && errno != EWOULDBLOCK && errno != EAGAIN) {
213                   read_failed:
214                         rsyserr(FERROR, errno, "safe_read failed to read %ld bytes [%s]",
215                                 (long)len, who_am_i());
216                         exit_cleanup(RERR_STREAMIO);
217                 }
218                 got = 0;
219         } else
220                 got = n;
221
222         while (1) {
223                 struct timeval tv;
224                 fd_set r_fds, e_fds;
225                 int cnt;
226
227                 FD_ZERO(&r_fds);
228                 FD_SET(fd, &r_fds);
229                 FD_ZERO(&e_fds);
230                 FD_SET(fd, &e_fds);
231                 tv.tv_sec = select_timeout;
232                 tv.tv_usec = 0;
233
234                 cnt = select(fd+1, &r_fds, NULL, &e_fds, &tv);
235                 if (cnt <= 0) {
236                         if (cnt < 0 && errno == EBADF) {
237                                 rsyserr(FERROR, errno, "safe_read select failed [%s]",
238                                         who_am_i());
239                                 exit_cleanup(RERR_FILEIO);
240                         }
241                         check_timeout();
242                         continue;
243                 }
244
245                 /*if (FD_ISSET(fd, &e_fds))
246                         rprintf(FINFO, "select exception on fd %d\n", fd); */
247
248                 if (FD_ISSET(fd, &r_fds)) {
249                         n = read(fd, buf + got, len - got);
250                         if (DEBUG_GTE(IO, 2))
251                                 rprintf(FINFO, "[%s] safe_read(%d)=%ld\n", who_am_i(), fd, (long)n);
252                         if (n == 0)
253                                 break;
254                         if (n < 0) {
255                                 if (errno == EINTR)
256                                         continue;
257                                 goto read_failed;
258                         }
259                         if ((got += (size_t)n) == len)
260                                 break;
261                 }
262         }
263
264         return got;
265 }
266
267 static const char *what_fd_is(int fd)
268 {
269         static char buf[20];
270
271         if (fd == sock_f_out)
272                 return "socket";
273         else if (fd == iobuf.out_fd)
274                 return "message fd";
275         else if (fd == batch_fd)
276                 return "batch file";
277         else {
278                 snprintf(buf, sizeof buf, "fd %d", fd);
279                 return buf;
280         }
281 }
282
283 /* Do a safe write, handling any needed looping and error handling.
284  * Returns only if everything was successfully written.  This routine
285  * is not used on the socket except very early in the transfer. */
286 static void safe_write(int fd, const char *buf, size_t len)
287 {
288         int n;
289
290         assert(fd != iobuf.out_fd);
291
292         n = write(fd, buf, len);
293         if ((size_t)n == len)
294                 return;
295         if (n < 0) {
296                 if (errno != EINTR && errno != EWOULDBLOCK && errno != EAGAIN) {
297                   write_failed:
298                         rsyserr(FERROR, errno,
299                                 "safe_write failed to write %ld bytes to %s [%s]",
300                                 (long)len, what_fd_is(fd), who_am_i());
301                         exit_cleanup(RERR_STREAMIO);
302                 }
303         } else {
304                 buf += n;
305                 len -= n;
306         }
307
308         while (len) {
309                 struct timeval tv;
310                 fd_set w_fds;
311                 int cnt;
312
313                 FD_ZERO(&w_fds);
314                 FD_SET(fd, &w_fds);
315                 tv.tv_sec = select_timeout;
316                 tv.tv_usec = 0;
317
318                 cnt = select(fd + 1, NULL, &w_fds, NULL, &tv);
319                 if (cnt <= 0) {
320                         if (cnt < 0 && errno == EBADF) {
321                                 rsyserr(FERROR, errno, "safe_write select failed on %s [%s]",
322                                         what_fd_is(fd), who_am_i());
323                                 exit_cleanup(RERR_FILEIO);
324                         }
325                         check_timeout();
326                         continue;
327                 }
328
329                 if (FD_ISSET(fd, &w_fds)) {
330                         n = write(fd, buf, len);
331                         if (n < 0) {
332                                 if (errno == EINTR)
333                                         continue;
334                                 goto write_failed;
335                         }
336                         buf += n;
337                         len -= n;
338                 }
339         }
340 }
341
342 /* This is only called when files-from data is known to be available.  We read
343  * a chunk of data and put it into the output buffer. */
344 static void forward_filesfrom_data(void)
345 {
346         int len;
347
348         len = read(ff_forward_fd, ff_xb.buf + ff_xb.len, ff_xb.size - ff_xb.len);
349         if (len <= 0) {
350                 if (len == 0 || errno != EINTR) {
351                         /* Send end-of-file marker */
352                         ff_forward_fd = -1;
353                         write_buf(iobuf.out_fd, "\0\0", ff_lastchar ? 2 : 1);
354                         free_xbuf(&ff_xb);
355                         if (ff_reenable_multiplex >= 0)
356                                 io_start_multiplex_out(ff_reenable_multiplex);
357                 }
358                 return;
359         }
360
361         if (DEBUG_GTE(IO, 2))
362                 rprintf(FINFO, "[%s] files-from read=%ld\n", who_am_i(), (long)len);
363
364 #ifdef ICONV_OPTION
365         len += ff_xb.len;
366 #endif
367
368         if (!eol_nulls) {
369                 char *s = ff_xb.buf + len;
370                 /* Transform CR and/or LF into '\0' */
371                 while (s-- > ff_xb.buf) {
372                         if (*s == '\n' || *s == '\r')
373                                 *s = '\0';
374                 }
375         }
376
377         if (ff_lastchar)
378                 ff_xb.pos = 0;
379         else {
380                 char *s = ff_xb.buf;
381                 /* Last buf ended with a '\0', so don't let this buf start with one. */
382                 while (len && *s == '\0')
383                         s++, len--;
384                 ff_xb.pos = s - ff_xb.buf;
385         }
386
387 #ifdef ICONV_OPTION
388         if (filesfrom_convert && len) {
389                 char *sob = ff_xb.buf + ff_xb.pos, *s = sob;
390                 char *eob = sob + len;
391                 int flags = ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_CIRCULAR_OUT;
392                 if (ff_lastchar == '\0')
393                         flags |= ICB_INIT;
394                 /* Convert/send each null-terminated string separately, skipping empties. */
395                 while (s != eob) {
396                         if (*s++ == '\0') {
397                                 ff_xb.len = s - sob - 1;
398                                 if (iconvbufs(ic_send, &ff_xb, &iobuf.out, flags) < 0)
399                                         exit_cleanup(RERR_PROTOCOL); /* impossible? */
400                                 write_buf(iobuf.out_fd, s-1, 1); /* Send the '\0'. */
401                                 while (s != eob && *s == '\0')
402                                         s++;
403                                 sob = s;
404                                 ff_xb.pos = sob - ff_xb.buf;
405                                 flags |= ICB_INIT;
406                         }
407                 }
408
409                 if ((ff_xb.len = s - sob) == 0)
410                         ff_lastchar = '\0';
411                 else {
412                         /* Handle a partial string specially, saving any incomplete chars. */
413                         flags &= ~ICB_INCLUDE_INCOMPLETE;
414                         if (iconvbufs(ic_send, &ff_xb, &iobuf.out, flags) < 0) {
415                                 if (errno == E2BIG)
416                                         exit_cleanup(RERR_PROTOCOL); /* impossible? */
417                                 if (ff_xb.pos)
418                                         memmove(ff_xb.buf, ff_xb.buf + ff_xb.pos, ff_xb.len);
419                         }
420                         ff_lastchar = 'x'; /* Anything non-zero. */
421                 }
422         } else
423 #endif
424
425         if (len) {
426                 char *f = ff_xb.buf + ff_xb.pos;
427                 char *t = ff_xb.buf;
428                 char *eob = f + len;
429                 /* Eliminate any multi-'\0' runs. */
430                 while (f != eob) {
431                         if (!(*t++ = *f++)) {
432                                 while (f != eob && *f == '\0')
433                                         f++;
434                         }
435                 }
436                 ff_lastchar = f[-1];
437                 if ((len = t - ff_xb.buf) != 0) {
438                         /* This will not circle back to perform_io() because we only get
439                          * called when there is plenty of room in the output buffer. */
440                         write_buf(iobuf.out_fd, ff_xb.buf, len);
441                 }
442         }
443 }
444
445 /* Perform buffered input and output until specified conditions are met.  When
446  * given a "needed" read requirement, we'll return without doing any I/O if the
447  * iobuf.in bytes are already available.  When reading, we'll read as many
448  * bytes as we can into the buffer, and return as soon as we meet the minimum
449  * read requirement.  When given a "needed" write requirement, we'll return
450  * without doing any I/O if that many bytes will fit in the output buffer (we
451  * check either iobuf.out or iobuf.msg, depending on the flags).  When writing,
452  * we write out as much as we can, and return as soon as the given free-space
453  * requirement is available.
454  *
455  * The iobuf.out and iobuf.msg buffers are circular, so some writes into them
456  * will need to be split when the data needs to wrap around to the start.  In
457  * order to help make this easier for some operations (such as the use of
458  * SIVAL() into the buffer) the buffers MUST have 4 bytes of overflow space at
459  * the end that is not not counted in the "size".  The iobuf.in buffer is not
460  * (currently) circular.  To facilitate the handling of MSG_DATA bytes as they
461  * are read-from/written-into the buffers, see the three raw_* iobuf vars.
462  *
463  * When writing, we flush data in the following priority order:
464  *
465  * 1. Finish writing any in-progress MSG_DATA sequence from iobuf.out.
466  *
467  * 2. Write out all the messages from the message buf (if iobuf.msg is active).
468  *    Yes, this means that a PIO_NEED_OUTROOM call will completely flush any
469  *    messages before getting to the iobuf.out flushing (except for rule 1).
470  *
471  * 3. Write out the raw data from iobuf.out, possibly filling in the multiplexed
472  *    MSG_DATA header that was pre-allocated (when output is multiplexed).
473  *
474  * TODO:  items for possible future work:
475  *
476  *    - Make this routine able to read the generator-to-receiver batch flow?
477  *
478  *    - Make the input buffer circular?
479  *
480  * Unlike the old routines that this replaces, it is OK to read ahead as far as
481  * we can because the read_a_msg() routine now reads its bytes out of the input
482  * buffer.  In the old days, only raw data was in the input buffer, and any
483  * unused raw data in the buf would prevent the reading of socket data. */
484 static char *perform_io(size_t needed, int flags)
485 {
486         fd_set r_fds, e_fds, w_fds;
487         struct timeval tv;
488         int cnt, max_fd;
489         size_t empty_buf_len = 0;
490         xbuf *out;
491         char *data;
492
493         if (iobuf.in.len == 0 && iobuf.in.pos != 0) {
494                 if (iobuf.raw_input_ends_before)
495                         iobuf.raw_input_ends_before -= iobuf.in.pos;
496                 iobuf.in.pos = 0;
497         }
498
499         switch (flags & PIO_NEED_FLAGS) {
500         case PIO_NEED_INPUT:
501                 if (DEBUG_GTE(IO, 3)) {
502                         rprintf(FINFO, "[%s] perform_io(%ld, %sinput)\n",
503                                 who_am_i(), (long)needed, flags & PIO_CONSUME_INPUT ? "consume&" : "");
504                 }
505
506                 /* Make sure the input buffer is big enough to hold "needed" bytes.
507                  * Also make sure it will fit in the free space at the end, or
508                  * else we need to shift some bytes. */
509                 if (needed && iobuf.in.size < needed) {
510                         if (!(iobuf.in.buf = realloc_array(iobuf.in.buf, char, needed)))
511                                 out_of_memory("perform_io");
512                         if (DEBUG_GTE(IO, 4)) {
513                                 rprintf(FINFO, "[%s] resized input buffer from %ld to %ld bytes.\n",
514                                         who_am_i(), (long)iobuf.in.size, (long)needed);
515                         }
516                         iobuf.in.size = needed;
517                 }
518                 if (iobuf.in.size - iobuf.in.pos < needed
519                  || (iobuf.in.len < needed && iobuf.in.len < 1024
520                   && iobuf.in.size - (iobuf.in.pos + iobuf.in.len) < 1024)) {
521                         memmove(iobuf.in.buf, iobuf.in.buf + iobuf.in.pos, iobuf.in.len);
522                         if (DEBUG_GTE(IO, 4)) {
523                                 rprintf(FINFO,
524                                         "[%s] moved %ld bytes from %ld to 0 in the input buffer (size=%ld, needed=%ld).\n",
525                                         who_am_i(), (long)iobuf.in.len, (long)iobuf.in.pos, (long)iobuf.in.size, (long)needed);
526                         }
527                         if (iobuf.raw_input_ends_before)
528                                 iobuf.raw_input_ends_before -= iobuf.in.pos;
529                         iobuf.in.pos = 0;
530                 }
531                 break;
532
533         case PIO_NEED_OUTROOM:
534                 /* We never resize the circular output buffer. */
535                 if (iobuf.out.size - iobuf.out_empty_len < needed) {
536                         fprintf(stderr, "need to write %ld bytes, iobuf.out.buf is only %ld bytes.\n",
537                                 (long)needed, (long)(iobuf.out.size - iobuf.out_empty_len));
538                         exit_cleanup(RERR_PROTOCOL);
539                 }
540
541                 if (DEBUG_GTE(IO, 3)) {
542                         rprintf(FINFO, "[%s] perform_io(%ld, outroom) needs to flush %ld\n",
543                                 who_am_i(), (long)needed,
544                                 iobuf.out.len > iobuf.out.size - needed
545                                 ? (long)iobuf.out.len - (iobuf.out.size - needed) : 0L);
546                 }
547                 break;
548
549         case PIO_NEED_MSGROOM:
550                 /* We never resize the circular message buffer. */
551                 if (iobuf.msg.size < needed) {
552                         fprintf(stderr, "need to write %ld bytes, iobuf.msg.buf is only %ld bytes.\n",
553                                 (long)needed, (long)iobuf.msg.size);
554                         exit_cleanup(RERR_PROTOCOL);
555                 }
556
557                 if (DEBUG_GTE(IO, 3)) {
558                         rprintf(FINFO, "[%s] perform_io(%ld, msgroom) needs to flush %ld\n",
559                                 who_am_i(), (long)needed,
560                                 iobuf.out.len > iobuf.msg.size - needed
561                                 ? (long)iobuf.out.len - (iobuf.msg.size - needed) : 0L);
562                 }
563                 break;
564
565         case 0:
566                 if (DEBUG_GTE(IO, 3))
567                         rprintf(FINFO, "[%s] perform_io(%ld, %d)\n", who_am_i(), (long)needed, flags);
568                 break;
569
570         default:
571                 exit_cleanup(RERR_UNSUPPORTED);
572         }
573
574         while (1) {
575                 switch (flags & PIO_NEED_FLAGS) {
576                 case PIO_NEED_INPUT:
577                         if (iobuf.in.len >= needed)
578                                 goto double_break;
579                         break;
580                 case PIO_NEED_OUTROOM:
581                         if (iobuf.out.len <= iobuf.out.size - needed)
582                                 goto double_break;
583                         break;
584                 case PIO_NEED_MSGROOM:
585                         if (iobuf.msg.len <= iobuf.msg.size - needed)
586                                 goto double_break;
587                         break;
588                 }
589
590                 max_fd = -1;
591
592                 FD_ZERO(&r_fds);
593                 FD_ZERO(&e_fds);
594                 if (iobuf.in_fd >= 0 && iobuf.in.size - (iobuf.in.pos + iobuf.in.len)) {
595                         if (!read_batch || batch_fd >= 0) {
596                                 FD_SET(iobuf.in_fd, &r_fds);
597                                 FD_SET(iobuf.in_fd, &e_fds);
598                         }
599                         if (iobuf.in_fd > max_fd)
600                                 max_fd = iobuf.in_fd;
601                 }
602
603                 /* Only do more filesfrom processing if there is enough room in the out buffer. */
604                 if (ff_forward_fd >= 0 && iobuf.out.size - iobuf.out.len > FILESFROM_BUFLEN*2) {
605                         FD_SET(ff_forward_fd, &r_fds);
606                         if (ff_forward_fd > max_fd)
607                                 max_fd = ff_forward_fd;
608                 }
609
610                 FD_ZERO(&w_fds);
611                 if (iobuf.out_fd >= 0) {
612                         if (iobuf.raw_flushing_ends_before
613                          || (!iobuf.msg.len && iobuf.out.len > iobuf.out_empty_len && !(flags & PIO_NEED_MSGROOM))) {
614                                 if (OUT_MULTIPLEXED && !iobuf.raw_flushing_ends_before) {
615                                         size_t val;
616
617                                         /* The iobuf.raw_flushing_ends_before value can point off the end
618                                          * of the iobuf.out buffer for a while, for easier subtracting. */
619                                         iobuf.raw_flushing_ends_before = iobuf.out.pos + iobuf.out.len;
620
621                                         SIVAL(iobuf.out.buf + iobuf.raw_data_header_pos, 0,
622                                               ((MPLEX_BASE + (int)MSG_DATA)<<24) + iobuf.out.len - 4);
623                                         if ((val = iobuf.out.size - iobuf.raw_data_header_pos) < 4) {
624                                                 /* We used some of the overflow bytes, so move them. */
625                                                 if (DEBUG_GTE(IO, 4)) {
626                                                         rprintf(FINFO, "[%s] wrap-bytes moved: %d (perform_io)\n",
627                                                                 who_am_i(), (int)val);
628                                                 }
629                                                 memcpy(iobuf.out.buf, iobuf.out.buf + iobuf.out.size, 4 - val);
630                                         }
631
632                                         if (DEBUG_GTE(IO, 1)) {
633                                                 rprintf(FINFO, "[%s] send_msg(%d, %ld)\n",
634                                                         who_am_i(), (int)MSG_DATA, (long)iobuf.out.len - 4);
635                                         }
636
637                                         /* reserve room for the next MSG_DATA header */
638                                         iobuf.raw_data_header_pos = iobuf.raw_flushing_ends_before;
639                                         if (iobuf.raw_data_header_pos >= iobuf.out.size)
640                                                 iobuf.raw_data_header_pos -= iobuf.out.size;
641                                         iobuf.out.len += 4;
642                                 }
643
644                                 empty_buf_len = iobuf.out_empty_len;
645                                 out = &iobuf.out;
646                         } else if (iobuf.msg.len) {
647                                 empty_buf_len = 0;
648                                 out = &iobuf.msg;
649                         } else
650                                 out = NULL;
651                         if (out) {
652                                 FD_SET(iobuf.out_fd, &w_fds);
653                                 if (iobuf.out_fd > max_fd)
654                                         max_fd = iobuf.out_fd;
655                         }
656                 } else
657                         out = NULL;
658
659                 if (max_fd < 0) {
660                         switch (flags & PIO_NEED_FLAGS) {
661                         case PIO_NEED_INPUT:
662                                 rprintf(FERROR, "error in perform_io: no fd for input.\n");
663                                 exit_cleanup(RERR_PROTOCOL);
664                         case PIO_NEED_OUTROOM:
665                         case PIO_NEED_MSGROOM:
666                                 msgs2stderr = 1;
667                                 rprintf(FERROR, "error in perform_io: no fd for output.\n");
668                                 exit_cleanup(RERR_PROTOCOL);
669                         default:
670                                 /* No stated needs, so I guess this is OK. */
671                                 break;
672                         }
673                         break;
674                 }
675
676                 if (extra_flist_sending_enabled) {
677                         if (file_total - file_old_total < MAX_FILECNT_LOOKAHEAD
678                          && file_total - file_old_total >= MIN_FILECNT_LOOKAHEAD)
679                                 tv.tv_sec = 0;
680                         else {
681                                 extra_flist_sending_enabled = False;
682                                 tv.tv_sec = select_timeout;
683                         }
684                 } else
685                         tv.tv_sec = select_timeout;
686                 tv.tv_usec = 0;
687
688                 cnt = select(max_fd + 1, &r_fds, &w_fds, &e_fds, &tv);
689
690                 if (cnt <= 0) {
691                         if (cnt < 0 && errno == EBADF) {
692                                 msgs2stderr = 1;
693                                 exit_cleanup(RERR_SOCKETIO);
694                         }
695                         if (extra_flist_sending_enabled) {
696                                 extra_flist_sending_enabled = False;
697                                 send_extra_file_list(sock_f_out, -1);
698                                 extra_flist_sending_enabled = !flist_eof;
699                         } else
700                                 check_timeout();
701                         FD_ZERO(&r_fds); /* Just in case... */
702                         FD_ZERO(&w_fds);
703                 }
704
705                 if (iobuf.in_fd >= 0 && FD_ISSET(iobuf.in_fd, &r_fds)) {
706                         size_t pos = iobuf.in.pos + iobuf.in.len;
707                         size_t len = iobuf.in.size - pos;
708                         int n;
709                         if ((n = read(iobuf.in_fd, iobuf.in.buf + pos, len)) <= 0) {
710                                 if (n == 0) {
711                                         if (!read_batch || batch_fd < 0 || am_generator)
712                                                 whine_about_eof(iobuf.in_fd); /* Doesn't return. */
713                                         batch_fd = -1;
714                                         continue;
715                                 }
716                                 if (errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
717                                         n = 0;
718                                 else {
719                                         /* Don't write errors on a dead socket. */
720                                         if (iobuf.in_fd == sock_f_in) {
721                                                 if (am_sender)
722                                                         msgs2stderr = 1;
723                                                 rsyserr(FERROR_SOCKET, errno, "read error");
724                                         } else
725                                                 rsyserr(FERROR, errno, "read error");
726                                         exit_cleanup(RERR_STREAMIO);
727                                 }
728                         }
729                         if (msgs2stderr && DEBUG_GTE(IO, 2))
730                                 rprintf(FINFO, "[%s] recv=%ld\n", who_am_i(), (long)n);
731
732                         if (io_timeout)
733                                 last_io_in = time(NULL);
734                         stats.total_read += n;
735
736                         iobuf.in.len += n;
737                 }
738
739                 if (iobuf.out_fd >= 0 && FD_ISSET(iobuf.out_fd, &w_fds)) {
740                         size_t len = iobuf.raw_flushing_ends_before ? iobuf.raw_flushing_ends_before - out->pos : out->len;
741                         int n;
742
743                         if (bwlimit_writemax && len > bwlimit_writemax)
744                                 len = bwlimit_writemax;
745
746                         if (out->pos + len > out->size)
747                                 len = out->size - out->pos;
748                         if ((n = write(iobuf.out_fd, out->buf + out->pos, len)) <= 0) {
749                                 if (errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
750                                         n = 0;
751                                 else {
752                                         /* Don't write errors on a dead socket. */
753                                         msgs2stderr = 1;
754                                         out->len = iobuf.raw_flushing_ends_before = out->pos = 0;
755                                         rsyserr(FERROR_SOCKET, errno, "[%s] write error", who_am_i());
756                                         exit_cleanup(RERR_STREAMIO);
757                                 }
758                         }
759                         if (msgs2stderr && DEBUG_GTE(IO, 2)) {
760                                 rprintf(FINFO, "[%s] %s sent=%ld\n",
761                                         who_am_i(), out == &iobuf.out ? "out" : "msg", (long)n);
762                         }
763
764                         if (io_timeout)
765                                 last_io_out = time(NULL);
766                         stats.total_written += n;
767
768                         if (bwlimit_writemax)
769                                 sleep_for_bwlimit(n);
770
771                         if ((out->pos += n) == out->size) {
772                                 if (iobuf.raw_flushing_ends_before)
773                                         iobuf.raw_flushing_ends_before -= out->size;
774                                 out->pos = 0;
775                         }
776                         if (out->pos == iobuf.raw_flushing_ends_before)
777                                 iobuf.raw_flushing_ends_before = 0;
778                         if ((out->len -= n) == empty_buf_len) {
779                                 out->pos = 0;
780                                 if (empty_buf_len)
781                                         iobuf.raw_data_header_pos = 0;
782                         }
783                 }
784
785                 if (ff_forward_fd >= 0 && FD_ISSET(ff_forward_fd, &r_fds)) {
786                         /* This can potentially flush all output and enable
787                          * multiplexed output, so keep this last in the loop
788                          * and be sure to not cache anything that would break
789                          * such a change. */
790                         forward_filesfrom_data();
791                 }
792         }
793   double_break:
794
795         data = iobuf.in.buf + iobuf.in.pos;
796
797         if (flags & PIO_CONSUME_INPUT) {
798                 iobuf.in.len -= needed;
799                 iobuf.in.pos += needed;
800         }
801
802         return data;
803 }
804
805 void noop_io_until_death(void)
806 {
807         char buf[1024];
808
809         kluge_around_eof = 1;
810         set_io_timeout(10);
811
812         while (1)
813                 read_buf(iobuf.in_fd, buf, sizeof buf);
814 }
815
816 /* Buffer a message for the multiplexed output stream.  Is never used for MSG_DATA. */
817 int send_msg(enum msgcode code, const char *buf, size_t len, int convert)
818 {
819         char *hdr;
820         size_t pos;
821         BOOL want_debug = DEBUG_GTE(IO, 1) && convert >= 0 && (msgs2stderr || code != MSG_INFO);
822
823         if (!OUT_MULTIPLEXED)
824                 return 0;
825
826         if (want_debug)
827                 rprintf(FINFO, "[%s] send_msg(%d, %ld)\n", who_am_i(), (int)code, (long)len);
828
829 #ifdef ICONV_OPTION
830         if (convert > 0 && ic_send == (iconv_t)-1)
831                 convert = 0;
832         if (convert > 0) {
833                 /* Ensuring double-size room leaves space for a potential conversion. */
834                 if (iobuf.msg.len + len*2 + 4 > iobuf.msg.size)
835                         perform_io(len*2 + 4, PIO_NEED_MSGROOM);
836         } else
837 #endif
838         if (iobuf.msg.len + len + 4 > iobuf.msg.size)
839                 perform_io(len + 4, PIO_NEED_MSGROOM);
840
841         pos = iobuf.msg.pos + iobuf.msg.len; /* Must be set after any flushing. */
842         if (pos >= iobuf.msg.size)
843                 pos -= iobuf.msg.size;
844         hdr = iobuf.msg.buf + pos;
845
846         iobuf.msg.len += 4; /* Leave room for the coming header bytes. */
847
848 #ifdef ICONV_OPTION
849         if (convert > 0) {
850                 xbuf inbuf;
851
852                 INIT_XBUF(inbuf, (char*)buf, len, (size_t)-1);
853
854                 len = iobuf.msg.len;
855                 iconvbufs(ic_send, &inbuf, &iobuf.msg,
856                           ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_CIRCULAR_OUT | ICB_INIT);
857                 if (inbuf.len > 0) {
858                         rprintf(FERROR, "overflowed iobuf.msg buffer in send_msg");
859                         exit_cleanup(RERR_UNSUPPORTED);
860                 }
861                 len = iobuf.msg.len - len;
862         } else
863 #endif
864         {
865                 size_t siz;
866
867                 if ((pos += 4) >= iobuf.msg.size)
868                         pos -= iobuf.msg.size;
869
870                 /* Handle a split copy if we wrap around the end of the circular buffer. */
871                 if (pos >= iobuf.msg.pos && (siz = iobuf.msg.size - pos) < len) {
872                         memcpy(iobuf.msg.buf + pos, buf, siz);
873                         memcpy(iobuf.msg.buf, buf + siz, len - siz);
874                 } else
875                         memcpy(iobuf.msg.buf + pos, buf, len);
876
877                 iobuf.msg.len += len;
878         }
879
880         SIVAL(hdr, 0, ((MPLEX_BASE + (int)code)<<24) + len);
881         /* If the header used any overflow bytes, move them to the start. */
882         if ((pos = hdr+4 - iobuf.msg.buf) > iobuf.msg.size) {
883                 size_t siz = pos - iobuf.msg.size;
884                 if (DEBUG_GTE(IO, 4))
885                         rprintf(FINFO, "[%s] wrap-bytes moved: %d (send_msg)\n", who_am_i(), (int)siz);
886                 memcpy(iobuf.msg.buf, hdr+4 - siz, siz);
887         }
888
889         if (want_debug && convert > 0)
890                 rprintf(FINFO, "[%s] converted msg len=%ld\n", who_am_i(), (long)len);
891
892         return 1;
893 }
894
895 void send_msg_int(enum msgcode code, int num)
896 {
897         char numbuf[4];
898
899         if (DEBUG_GTE(IO, 1))
900                 rprintf(FINFO, "[%s] send_msg_int(%d, %d)\n", who_am_i(), (int)code, num);
901
902         SIVAL(numbuf, 0, num);
903         send_msg(code, numbuf, 4, -1);
904 }
905
906 static void got_flist_entry_status(enum festatus status, int ndx)
907 {
908         struct file_list *flist = flist_for_ndx(ndx, "got_flist_entry_status");
909
910         if (remove_source_files) {
911                 active_filecnt--;
912                 active_bytecnt -= F_LENGTH(flist->files[ndx - flist->ndx_start]);
913         }
914
915         if (inc_recurse)
916                 flist->in_progress--;
917
918         switch (status) {
919         case FES_SUCCESS:
920                 if (remove_source_files)
921                         send_msg_int(MSG_SUCCESS, ndx);
922                 if (preserve_hard_links) {
923                         struct file_struct *file = flist->files[ndx - flist->ndx_start];
924                         if (F_IS_HLINKED(file)) {
925                                 flist_ndx_push(&hlink_list, ndx);
926                                 flist->in_progress++;
927                         }
928                 }
929                 break;
930         case FES_REDO:
931                 if (read_batch) {
932                         if (inc_recurse)
933                                 flist->in_progress++;
934                         break;
935                 }
936                 if (inc_recurse)
937                         flist->to_redo++;
938                 flist_ndx_push(&redo_list, ndx);
939                 break;
940         case FES_NO_SEND:
941                 break;
942         }
943 }
944
945 /* Note the fds used for the main socket (which might really be a pipe
946  * for a local transfer, but we can ignore that). */
947 void io_set_sock_fds(int f_in, int f_out)
948 {
949         sock_f_in = f_in;
950         sock_f_out = f_out;
951 }
952
953 void set_io_timeout(int secs)
954 {
955         io_timeout = secs;
956
957         if (!io_timeout || io_timeout > SELECT_TIMEOUT)
958                 select_timeout = SELECT_TIMEOUT;
959         else
960                 select_timeout = io_timeout;
961
962         allowed_lull = read_batch ? 0 : (io_timeout + 1) / 2;
963 }
964
965 static void check_for_d_option_error(const char *msg)
966 {
967         static char rsync263_opts[] = "BCDHIKLPRSTWabceghlnopqrtuvxz";
968         char *colon;
969         int saw_d = 0;
970
971         if (*msg != 'r'
972          || strncmp(msg, REMOTE_OPTION_ERROR, sizeof REMOTE_OPTION_ERROR - 1) != 0)
973                 return;
974
975         msg += sizeof REMOTE_OPTION_ERROR - 1;
976         if (*msg == '-' || (colon = strchr(msg, ':')) == NULL
977          || strncmp(colon, REMOTE_OPTION_ERROR2, sizeof REMOTE_OPTION_ERROR2 - 1) != 0)
978                 return;
979
980         for ( ; *msg != ':'; msg++) {
981                 if (*msg == 'd')
982                         saw_d = 1;
983                 else if (*msg == 'e')
984                         break;
985                 else if (strchr(rsync263_opts, *msg) == NULL)
986                         return;
987         }
988
989         if (saw_d) {
990                 rprintf(FWARNING,
991                     "*** Try using \"--old-d\" if remote rsync is <= 2.6.3 ***\n");
992         }
993 }
994
995 /* This is used by the generator to limit how many file transfers can
996  * be active at once when --remove-source-files is specified.  Without
997  * this, sender-side deletions were mostly happening at the end. */
998 void increment_active_files(int ndx, int itemizing, enum logcode code)
999 {
1000         while (1) {
1001                 /* TODO: tune these limits? */
1002                 int limit = active_bytecnt >= 128*1024 ? 10 : 50;
1003                 if (active_filecnt < limit)
1004                         break;
1005                 check_for_finished_files(itemizing, code, 0);
1006                 if (active_filecnt < limit)
1007                         break;
1008                 wait_for_receiver();
1009         }
1010
1011         active_filecnt++;
1012         active_bytecnt += F_LENGTH(cur_flist->files[ndx - cur_flist->ndx_start]);
1013 }
1014
1015 int get_redo_num(void)
1016 {
1017         return flist_ndx_pop(&redo_list);
1018 }
1019
1020 int get_hlink_num(void)
1021 {
1022         return flist_ndx_pop(&hlink_list);
1023 }
1024
1025 /* When we're the receiver and we have a local --files-from list of names
1026  * that needs to be sent over the socket to the sender, we have to do two
1027  * things at the same time: send the sender a list of what files we're
1028  * processing and read the incoming file+info list from the sender.  We do
1029  * this by making recv_file_list() call forward_filesfrom_data(), which
1030  * will ensure that we forward data to the sender until we get some data
1031  * for recv_file_list() to use. */
1032 void start_filesfrom_forwarding(int fd)
1033 {
1034         if (protocol_version < 31 && OUT_MULTIPLEXED) {
1035                 /* Older protocols send the files-from data w/o packaging
1036                  * it in multiplexed I/O packets, so temporarily switch
1037                  * to buffered I/O to match this behavior. */
1038                 iobuf.msg.pos = iobuf.msg.len = 0; /* Be extra sure no messages go out. */
1039                 ff_reenable_multiplex = io_end_multiplex_out(MPLX_TO_BUFFERED);
1040         }
1041         ff_forward_fd = fd;
1042
1043         alloc_xbuf(&ff_xb, FILESFROM_BUFLEN);
1044 }
1045
1046 /* Read a line into the "buf" buffer. */
1047 int read_line(int fd, char *buf, size_t bufsiz, int flags)
1048 {
1049         char ch, *s, *eob;
1050
1051 #ifdef ICONV_OPTION
1052         if (flags & RL_CONVERT && iconv_buf.size < bufsiz)
1053                 realloc_xbuf(&iconv_buf, bufsiz + 1024);
1054 #endif
1055
1056   start:
1057 #ifdef ICONV_OPTION
1058         s = flags & RL_CONVERT ? iconv_buf.buf : buf;
1059 #else
1060         s = buf;
1061 #endif
1062         eob = s + bufsiz - 1;
1063         while (1) {
1064                 /* We avoid read_byte() for files because files can return an EOF. */
1065                 if (fd == iobuf.in_fd)
1066                         ch = read_byte(fd);
1067                 else if (safe_read(fd, &ch, 1) == 0)
1068                         break;
1069                 if (flags & RL_EOL_NULLS ? ch == '\0' : (ch == '\r' || ch == '\n')) {
1070                         /* Skip empty lines if dumping comments. */
1071                         if (flags & RL_DUMP_COMMENTS && s == buf)
1072                                 continue;
1073                         break;
1074                 }
1075                 if (s < eob)
1076                         *s++ = ch;
1077         }
1078         *s = '\0';
1079
1080         if (flags & RL_DUMP_COMMENTS && (*buf == '#' || *buf == ';'))
1081                 goto start;
1082
1083 #ifdef ICONV_OPTION
1084         if (flags & RL_CONVERT) {
1085                 xbuf outbuf;
1086                 INIT_XBUF(outbuf, buf, 0, bufsiz);
1087                 iconv_buf.pos = 0;
1088                 iconv_buf.len = s - iconv_buf.buf;
1089                 iconvbufs(ic_recv, &iconv_buf, &outbuf,
1090                           ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_INIT);
1091                 outbuf.buf[outbuf.len] = '\0';
1092                 return outbuf.len;
1093         }
1094 #endif
1095
1096         return s - buf;
1097 }
1098
1099 void read_args(int f_in, char *mod_name, char *buf, size_t bufsiz, int rl_nulls,
1100                char ***argv_p, int *argc_p, char **request_p)
1101 {
1102         int maxargs = MAX_ARGS;
1103         int dot_pos = 0;
1104         int argc = 0;
1105         char **argv, *p;
1106         int rl_flags = (rl_nulls ? RL_EOL_NULLS : 0);
1107
1108 #ifdef ICONV_OPTION
1109         rl_flags |= (protect_args && ic_recv != (iconv_t)-1 ? RL_CONVERT : 0);
1110 #endif
1111
1112         if (!(argv = new_array(char *, maxargs)))
1113                 out_of_memory("read_args");
1114         if (mod_name && !protect_args)
1115                 argv[argc++] = "rsyncd";
1116
1117         while (1) {
1118                 if (read_line(f_in, buf, bufsiz, rl_flags) == 0)
1119                         break;
1120
1121                 if (argc == maxargs-1) {
1122                         maxargs += MAX_ARGS;
1123                         if (!(argv = realloc_array(argv, char *, maxargs)))
1124                                 out_of_memory("read_args");
1125                 }
1126
1127                 if (dot_pos) {
1128                         if (request_p) {
1129                                 *request_p = strdup(buf);
1130                                 request_p = NULL;
1131                         }
1132                         if (mod_name)
1133                                 glob_expand_module(mod_name, buf, &argv, &argc, &maxargs);
1134                         else
1135                                 glob_expand(buf, &argv, &argc, &maxargs);
1136                 } else {
1137                         if (!(p = strdup(buf)))
1138                                 out_of_memory("read_args");
1139                         argv[argc++] = p;
1140                         if (*p == '.' && p[1] == '\0')
1141                                 dot_pos = argc;
1142                 }
1143         }
1144         argv[argc] = NULL;
1145
1146         glob_expand(NULL, NULL, NULL, NULL);
1147
1148         *argc_p = argc;
1149         *argv_p = argv;
1150 }
1151
1152 BOOL io_start_buffering_out(int f_out)
1153 {
1154         if (msgs2stderr && DEBUG_GTE(IO, 2))
1155                 rprintf(FINFO, "[%s] io_start_buffering_out(%d)\n", who_am_i(), f_out);
1156
1157         if (OUT_MULTIPLEXED && !iobuf.msg.buf) {
1158                 iobuf.msg.size = IO_BUFFER_SIZE - 4;
1159                 if (!(iobuf.msg.buf = new_array(char, iobuf.msg.size + 4)))
1160                         out_of_memory("io_start_buffering_out");
1161                 iobuf.msg.pos = iobuf.msg.len = 0;
1162         }
1163
1164         if (iobuf.out.buf) {
1165                 if (iobuf.out_fd == -1)
1166                         iobuf.out_fd = f_out;
1167                 assert(f_out == iobuf.out_fd);
1168                 return False;
1169         }
1170
1171         iobuf.out.size = IO_BUFFER_SIZE * 2 - 4;
1172         /* The 4 overflow bytes makes some circular-buffer wrapping operations easier. */
1173         if (!(iobuf.out.buf = new_array(char, iobuf.out.size + 4)))
1174                 out_of_memory("io_start_buffering_out");
1175         iobuf.out.pos = iobuf.out.len = 0;
1176         iobuf.out_fd = f_out;
1177
1178         return True;
1179 }
1180
1181 BOOL io_start_buffering_in(int f_in)
1182 {
1183         if (msgs2stderr && DEBUG_GTE(IO, 2))
1184                 rprintf(FINFO, "[%s] io_start_buffering_in(%d)\n", who_am_i(), f_in);
1185
1186         if (iobuf.in.buf) {
1187                 if (iobuf.in_fd == -1)
1188                         iobuf.in_fd = f_in;
1189                 assert(f_in == iobuf.in_fd);
1190                 return False;
1191         }
1192
1193         iobuf.in.size = IO_BUFFER_SIZE;
1194         if (!(iobuf.in.buf = new_array(char, iobuf.in.size)))
1195                 out_of_memory("io_start_buffering_in");
1196
1197         iobuf.in.pos = iobuf.in.len = 0;
1198
1199         iobuf.in_fd = f_in;
1200
1201         return True;
1202 }
1203
1204 void io_end_buffering_in(BOOL free_buffers)
1205 {
1206         if (msgs2stderr && DEBUG_GTE(IO, 2)) {
1207                 rprintf(FINFO, "[%s] io_end_buffering_in(IOBUF_%s_BUFS)\n",
1208                         who_am_i(), free_buffers ? "FREE" : "KEEP");
1209         }
1210
1211         if (free_buffers)
1212                 free_xbuf(&iobuf.in);
1213         else
1214                 iobuf.in.pos = iobuf.in.len = 0;
1215
1216         iobuf.in_fd = -1;
1217 }
1218
1219 void io_end_buffering_out(BOOL free_buffers)
1220 {
1221         if (msgs2stderr && DEBUG_GTE(IO, 2)) {
1222                 rprintf(FINFO, "[%s] io_end_buffering_out(IOBUF_%s_BUFS)\n",
1223                         who_am_i(), free_buffers ? "FREE" : "KEEP");
1224         }
1225
1226         io_flush(FULL_FLUSH);
1227
1228         if (free_buffers) {
1229                 free_xbuf(&iobuf.out);
1230                 free_xbuf(&iobuf.msg);
1231         }
1232
1233         iobuf.out_fd = -1;
1234 }
1235
1236 void maybe_flush_socket(int important)
1237 {
1238         if (flist_eof && iobuf.out.buf && iobuf.out.len > iobuf.out_empty_len
1239          && (important || time(NULL) - last_io_out >= 5))
1240                 io_flush(NORMAL_FLUSH);
1241 }
1242
1243 void maybe_send_keepalive(void)
1244 {
1245         if (time(NULL) - last_io_out >= allowed_lull) {
1246                 if (!iobuf.msg.len && iobuf.out.len == iobuf.out_empty_len) {
1247                         if (protocol_version < 29)
1248                                 return; /* there's nothing we can do */
1249                         if (protocol_version >= 30)
1250                                 send_msg(MSG_NOOP, "", 0, 0);
1251                         else {
1252                                 write_int(iobuf.out_fd, cur_flist->used);
1253                                 write_shortint(iobuf.out_fd, ITEM_IS_NEW);
1254                         }
1255                 }
1256                 if (iobuf.msg.len)
1257                         perform_io(iobuf.msg.size - iobuf.msg.len + 1, PIO_NEED_MSGROOM);
1258                 else if (iobuf.out.len > iobuf.out_empty_len)
1259                         io_flush(NORMAL_FLUSH);
1260         }
1261 }
1262
1263 void start_flist_forward(int ndx)
1264 {
1265         write_int(iobuf.out_fd, ndx);
1266         forward_flist_data = 1;
1267 }
1268
1269 void stop_flist_forward(void)
1270 {
1271         forward_flist_data = 0;
1272 }
1273
1274 /* Read a message from a multiplexed source. */
1275 static void read_a_msg(void)
1276 {
1277         char *data, line[BIGPATHBUFLEN];
1278         int tag, val;
1279         size_t msg_bytes;
1280
1281         data = perform_io(4, PIO_INPUT_AND_CONSUME);
1282         tag = IVAL(data, 0);
1283
1284         msg_bytes = tag & 0xFFFFFF;
1285         tag = (tag >> 24) - MPLEX_BASE;
1286
1287         if (DEBUG_GTE(IO, 1) && (msgs2stderr || tag != MSG_INFO))
1288                 rprintf(FINFO, "[%s] got msg=%d, len=%ld\n", who_am_i(), (int)tag, (long)msg_bytes);
1289
1290         switch (tag) {
1291         case MSG_DATA:
1292                 assert(iobuf.raw_input_ends_before == 0);
1293                 /* Though this does not yet read the data, we do mark where in
1294                  * the buffer the msg data will end once it is read.  It is
1295                  * possible that this points off the end of the buffer, in
1296                  * which case the gradual reading of the input stream will
1297                  * cause this value to decrease and eventually become real. */
1298                 iobuf.raw_input_ends_before = iobuf.in.pos + msg_bytes;
1299                 break;
1300         case MSG_STATS:
1301                 if (msg_bytes != sizeof stats.total_read || !am_generator)
1302                         goto invalid_msg;
1303                 data = perform_io(sizeof stats.total_read, PIO_INPUT_AND_CONSUME);
1304                 memcpy((char*)&stats.total_read, data, sizeof stats.total_read);
1305                 break;
1306         case MSG_REDO:
1307                 if (msg_bytes != 4 || !am_generator)
1308                         goto invalid_msg;
1309                 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1310                 got_flist_entry_status(FES_REDO, IVAL(data, 0));
1311                 break;
1312         case MSG_IO_ERROR:
1313                 if (msg_bytes != 4 || am_sender)
1314                         goto invalid_msg;
1315                 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1316                 io_error |= IVAL(data, 0);
1317                 if (!am_generator)
1318                         send_msg(MSG_IO_ERROR, data, 4, 0);
1319                 break;
1320         case MSG_IO_TIMEOUT:
1321                 if (msg_bytes != 4 || am_server || am_generator)
1322                         goto invalid_msg;
1323                 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1324                 val = IVAL(data, 0);
1325                 if (!io_timeout || io_timeout > val) {
1326                         if (INFO_GTE(MISC, 2))
1327                                 rprintf(FINFO, "Setting --timeout=%d to match server\n", val);
1328                         set_io_timeout(val);
1329                 }
1330                 break;
1331         case MSG_NOOP:
1332                 if (am_sender)
1333                         maybe_send_keepalive();
1334                 break;
1335         case MSG_DELETED:
1336                 if (msg_bytes >= sizeof line)
1337                         goto overflow;
1338                 if (am_generator) {
1339                         memcpy(line, perform_io(msg_bytes, PIO_INPUT_AND_CONSUME), msg_bytes);
1340                         send_msg(MSG_DELETED, line, msg_bytes, 1);
1341                         break;
1342                 }
1343 #ifdef ICONV_OPTION
1344                 if (ic_recv != (iconv_t)-1) {
1345                         xbuf outbuf, inbuf;
1346                         char ibuf[512];
1347                         int add_null = 0;
1348                         int flags = ICB_INCLUDE_BAD | ICB_INIT;
1349
1350                         INIT_CONST_XBUF(outbuf, line);
1351                         INIT_XBUF(inbuf, ibuf, 0, (size_t)-1);
1352
1353                         while (msg_bytes) {
1354                                 size_t len = msg_bytes > sizeof ibuf - inbuf.len ? sizeof ibuf - inbuf.len : msg_bytes;
1355                                 memcpy(ibuf + inbuf.len, perform_io(len, PIO_INPUT_AND_CONSUME), len);
1356                                 inbuf.pos = 0;
1357                                 inbuf.len += len;
1358                                 if (!(msg_bytes -= len) && !ibuf[inbuf.len-1])
1359                                         inbuf.len--, add_null = 1;
1360                                 if (iconvbufs(ic_send, &inbuf, &outbuf, flags) < 0) {
1361                                         if (errno == E2BIG)
1362                                                 goto overflow;
1363                                         /* Buffer ended with an incomplete char, so move the
1364                                          * bytes to the start of the buffer and continue. */
1365                                         memmove(ibuf, ibuf + inbuf.pos, inbuf.len);
1366                                 }
1367                                 flags &= ~ICB_INIT;
1368                         }
1369                         if (add_null) {
1370                                 if (outbuf.len == outbuf.size)
1371                                         goto overflow;
1372                                 outbuf.buf[outbuf.len++] = '\0';
1373                         }
1374                         msg_bytes = outbuf.len;
1375                 } else
1376 #endif
1377                         memcpy(line, perform_io(msg_bytes, PIO_INPUT_AND_CONSUME), msg_bytes);
1378                 /* A directory name was sent with the trailing null */
1379                 if (msg_bytes > 0 && !line[msg_bytes-1])
1380                         log_delete(line, S_IFDIR);
1381                 else {
1382                         line[msg_bytes] = '\0';
1383                         log_delete(line, S_IFREG);
1384                 }
1385                 break;
1386         case MSG_SUCCESS:
1387                 if (msg_bytes != 4) {
1388                   invalid_msg:
1389                         rprintf(FERROR, "invalid multi-message %d:%lu [%s%s]\n",
1390                                 tag, (unsigned long)msg_bytes, who_am_i(),
1391                                 inc_recurse ? "/inc" : "");
1392                         exit_cleanup(RERR_STREAMIO);
1393                 }
1394                 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1395                 if (am_generator)
1396                         got_flist_entry_status(FES_SUCCESS, IVAL(data, 0));
1397                 else
1398                         successful_send(IVAL(data, 0));
1399                 break;
1400         case MSG_NO_SEND:
1401                 if (msg_bytes != 4)
1402                         goto invalid_msg;
1403                 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1404                 if (am_generator)
1405                         got_flist_entry_status(FES_NO_SEND, IVAL(data, 0));
1406                 else
1407                         send_msg(MSG_NO_SEND, data, 4, 0);
1408                 break;
1409         case MSG_ERROR_SOCKET:
1410         case MSG_ERROR_UTF8:
1411         case MSG_CLIENT:
1412         case MSG_LOG:
1413                 if (!am_generator)
1414                         goto invalid_msg;
1415                 if (tag == MSG_ERROR_SOCKET)
1416                         msgs2stderr = 1;
1417                 /* FALL THROUGH */
1418         case MSG_INFO:
1419         case MSG_ERROR:
1420         case MSG_ERROR_XFER:
1421         case MSG_WARNING:
1422                 if (msg_bytes >= sizeof line) {
1423                     overflow:
1424                         rprintf(FERROR,
1425                                 "multiplexing overflow %d:%lu [%s%s]\n",
1426                                 tag, (unsigned long)msg_bytes, who_am_i(),
1427                                 inc_recurse ? "/inc" : "");
1428                         exit_cleanup(RERR_STREAMIO);
1429                 }
1430                 memcpy(line, perform_io(msg_bytes, PIO_INPUT_AND_CONSUME), msg_bytes);
1431                 rwrite((enum logcode)tag, line, msg_bytes, !am_generator);
1432                 if (first_message) {
1433                         if (list_only && !am_sender && tag == 1 && msg_bytes < sizeof line) {
1434                                 line[msg_bytes] = '\0';
1435                                 check_for_d_option_error(line);
1436                         }
1437                         first_message = 0;
1438                 }
1439                 break;
1440         case MSG_ERROR_EXIT:
1441                 if (msg_bytes != 4)
1442                         goto invalid_msg;
1443                 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1444                 val = IVAL(data, 0);
1445                 if (am_generator && protocol_version >= 31)
1446                         send_msg_int(MSG_ERROR_EXIT, val);
1447                 if (am_generator)
1448                         val = RERR_RCVR_ERROR; /* avoids duplicate errors */
1449                 exit_cleanup(val);
1450         default:
1451                 rprintf(FERROR, "unexpected tag %d [%s%s]\n",
1452                         tag, who_am_i(), inc_recurse ? "/inc" : "");
1453                 exit_cleanup(RERR_STREAMIO);
1454         }
1455 }
1456
1457 void wait_for_receiver(void)
1458 {
1459         if (!iobuf.raw_input_ends_before)
1460                 read_a_msg();
1461
1462         if (iobuf.raw_input_ends_before) {
1463                 int ndx = read_int(iobuf.in_fd);
1464                 if (ndx < 0) {
1465                         switch (ndx) {
1466                         case NDX_FLIST_EOF:
1467                                 flist_eof = 1;
1468                                 if (DEBUG_GTE(FLIST, 3))
1469                                         rprintf(FINFO, "[%s] flist_eof=1\n", who_am_i());
1470                                 break;
1471                         case NDX_DONE:
1472                                 msgdone_cnt++;
1473                                 break;
1474                         default:
1475                                 exit_cleanup(RERR_STREAMIO);
1476                         }
1477                 } else {
1478                         struct file_list *flist;
1479                         if (DEBUG_GTE(FLIST, 2)) {
1480                                 rprintf(FINFO, "[%s] receiving flist for dir %d\n",
1481                                         who_am_i(), ndx);
1482                         }
1483                         flist = recv_file_list(iobuf.in_fd);
1484                         flist->parent_ndx = ndx;
1485 #ifdef SUPPORT_HARD_LINKS
1486                         if (preserve_hard_links)
1487                                 match_hard_links(flist);
1488 #endif
1489                 }
1490         }
1491 }
1492
1493 unsigned short read_shortint(int f)
1494 {
1495         char b[2];
1496         read_buf(f, b, 2);
1497         return (UVAL(b, 1) << 8) + UVAL(b, 0);
1498 }
1499
1500 int32 read_int(int f)
1501 {
1502         char b[4];
1503         int32 num;
1504
1505         read_buf(f, b, 4);
1506         num = IVAL(b, 0);
1507 #if SIZEOF_INT32 > 4
1508         if (num & (int32)0x80000000)
1509                 num |= ~(int32)0xffffffff;
1510 #endif
1511         return num;
1512 }
1513
1514 int32 read_varint(int f)
1515 {
1516         union {
1517                 char b[5];
1518                 int32 x;
1519         } u;
1520         uchar ch;
1521         int extra;
1522
1523         u.x = 0;
1524         ch = read_byte(f);
1525         extra = int_byte_extra[ch / 4];
1526         if (extra) {
1527                 uchar bit = ((uchar)1<<(8-extra));
1528                 if (extra >= (int)sizeof u.b) {
1529                         rprintf(FERROR, "Overflow in read_varint()\n");
1530                         exit_cleanup(RERR_STREAMIO);
1531                 }
1532                 read_buf(f, u.b, extra);
1533                 u.b[extra] = ch & (bit-1);
1534         } else
1535                 u.b[0] = ch;
1536 #if CAREFUL_ALIGNMENT
1537         u.x = IVAL(u.b,0);
1538 #endif
1539 #if SIZEOF_INT32 > 4
1540         if (u.x & (int32)0x80000000)
1541                 u.x |= ~(int32)0xffffffff;
1542 #endif
1543         return u.x;
1544 }
1545
1546 int64 read_varlong(int f, uchar min_bytes)
1547 {
1548         union {
1549                 char b[9];
1550                 int64 x;
1551         } u;
1552         char b2[8];
1553         int extra;
1554
1555 #if SIZEOF_INT64 < 8
1556         memset(u.b, 0, 8);
1557 #else
1558         u.x = 0;
1559 #endif
1560         read_buf(f, b2, min_bytes);
1561         memcpy(u.b, b2+1, min_bytes-1);
1562         extra = int_byte_extra[CVAL(b2, 0) / 4];
1563         if (extra) {
1564                 uchar bit = ((uchar)1<<(8-extra));
1565                 if (min_bytes + extra > (int)sizeof u.b) {
1566                         rprintf(FERROR, "Overflow in read_varlong()\n");
1567                         exit_cleanup(RERR_STREAMIO);
1568                 }
1569                 read_buf(f, u.b + min_bytes - 1, extra);
1570                 u.b[min_bytes + extra - 1] = CVAL(b2, 0) & (bit-1);
1571 #if SIZEOF_INT64 < 8
1572                 if (min_bytes + extra > 5 || u.b[4] || CVAL(u.b,3) & 0x80) {
1573                         rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1574                         exit_cleanup(RERR_UNSUPPORTED);
1575                 }
1576 #endif
1577         } else
1578                 u.b[min_bytes + extra - 1] = CVAL(b2, 0);
1579 #if SIZEOF_INT64 < 8
1580         u.x = IVAL(u.b,0);
1581 #elif CAREFUL_ALIGNMENT
1582         u.x = IVAL(u.b,0) | (((int64)IVAL(u.b,4))<<32);
1583 #endif
1584         return u.x;
1585 }
1586
1587 int64 read_longint(int f)
1588 {
1589 #if SIZEOF_INT64 >= 8
1590         char b[9];
1591 #endif
1592         int32 num = read_int(f);
1593
1594         if (num != (int32)0xffffffff)
1595                 return num;
1596
1597 #if SIZEOF_INT64 < 8
1598         rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1599         exit_cleanup(RERR_UNSUPPORTED);
1600 #else
1601         read_buf(f, b, 8);
1602         return IVAL(b,0) | (((int64)IVAL(b,4))<<32);
1603 #endif
1604 }
1605
1606 void read_buf(int f, char *buf, size_t len)
1607 {
1608         if (f != iobuf.in_fd) {
1609                 if (safe_read(f, buf, len) != len)
1610                         whine_about_eof(f); /* Doesn't return. */
1611                 goto batch_copy;
1612         }
1613
1614         if (!IN_MULTIPLEXED) {
1615                 memcpy(buf, perform_io(len, PIO_INPUT_AND_CONSUME), len);
1616                 total_data_read += len;
1617                 if (forward_flist_data)
1618                         write_buf(iobuf.out_fd, buf, len);
1619           batch_copy:
1620                 if (f == write_batch_monitor_in)
1621                         safe_write(batch_fd, buf, len);
1622                 return;
1623         }
1624
1625         while (1) {
1626                 char *data;
1627                 size_t siz;
1628
1629                 while (!iobuf.raw_input_ends_before)
1630                         read_a_msg();
1631
1632                 siz = MIN(len, iobuf.raw_input_ends_before - iobuf.in.pos);
1633                 data = perform_io(siz, PIO_INPUT_AND_CONSUME);
1634                 if (iobuf.in.pos == iobuf.raw_input_ends_before)
1635                         iobuf.raw_input_ends_before = 0;
1636
1637                 /* The bytes at the "data" pointer will survive long
1638                  * enough to make a copy, but not past future I/O. */
1639                 memcpy(buf, data, siz);
1640                 total_data_read += siz;
1641
1642                 if (forward_flist_data)
1643                         write_buf(iobuf.out_fd, buf, siz);
1644
1645                 if (f == write_batch_monitor_in)
1646                         safe_write(batch_fd, buf, siz);
1647
1648                 if ((len -= siz) == 0)
1649                         break;
1650                 buf += siz;
1651         }
1652 }
1653
1654 void read_sbuf(int f, char *buf, size_t len)
1655 {
1656         read_buf(f, buf, len);
1657         buf[len] = '\0';
1658 }
1659
1660 uchar read_byte(int f)
1661 {
1662         uchar c;
1663         read_buf(f, (char*)&c, 1);
1664         return c;
1665 }
1666
1667 int read_vstring(int f, char *buf, int bufsize)
1668 {
1669         int len = read_byte(f);
1670
1671         if (len & 0x80)
1672                 len = (len & ~0x80) * 0x100 + read_byte(f);
1673
1674         if (len >= bufsize) {
1675                 rprintf(FERROR, "over-long vstring received (%d > %d)\n",
1676                         len, bufsize - 1);
1677                 return -1;
1678         }
1679
1680         if (len)
1681                 read_buf(f, buf, len);
1682         buf[len] = '\0';
1683         return len;
1684 }
1685
1686 /* Populate a sum_struct with values from the socket.  This is
1687  * called by both the sender and the receiver. */
1688 void read_sum_head(int f, struct sum_struct *sum)
1689 {
1690         int32 max_blength = protocol_version < 30 ? OLD_MAX_BLOCK_SIZE : MAX_BLOCK_SIZE;
1691         sum->count = read_int(f);
1692         if (sum->count < 0) {
1693                 rprintf(FERROR, "Invalid checksum count %ld [%s]\n",
1694                         (long)sum->count, who_am_i());
1695                 exit_cleanup(RERR_PROTOCOL);
1696         }
1697         sum->blength = read_int(f);
1698         if (sum->blength < 0 || sum->blength > max_blength) {
1699                 rprintf(FERROR, "Invalid block length %ld [%s]\n",
1700                         (long)sum->blength, who_am_i());
1701                 exit_cleanup(RERR_PROTOCOL);
1702         }
1703         sum->s2length = protocol_version < 27 ? csum_length : (int)read_int(f);
1704         if (sum->s2length < 0 || sum->s2length > MAX_DIGEST_LEN) {
1705                 rprintf(FERROR, "Invalid checksum length %d [%s]\n",
1706                         sum->s2length, who_am_i());
1707                 exit_cleanup(RERR_PROTOCOL);
1708         }
1709         sum->remainder = read_int(f);
1710         if (sum->remainder < 0 || sum->remainder > sum->blength) {
1711                 rprintf(FERROR, "Invalid remainder length %ld [%s]\n",
1712                         (long)sum->remainder, who_am_i());
1713                 exit_cleanup(RERR_PROTOCOL);
1714         }
1715 }
1716
1717 /* Send the values from a sum_struct over the socket.  Set sum to
1718  * NULL if there are no checksums to send.  This is called by both
1719  * the generator and the sender. */
1720 void write_sum_head(int f, struct sum_struct *sum)
1721 {
1722         static struct sum_struct null_sum;
1723
1724         if (sum == NULL)
1725                 sum = &null_sum;
1726
1727         write_int(f, sum->count);
1728         write_int(f, sum->blength);
1729         if (protocol_version >= 27)
1730                 write_int(f, sum->s2length);
1731         write_int(f, sum->remainder);
1732 }
1733
1734 /* Sleep after writing to limit I/O bandwidth usage.
1735  *
1736  * @todo Rather than sleeping after each write, it might be better to
1737  * use some kind of averaging.  The current algorithm seems to always
1738  * use a bit less bandwidth than specified, because it doesn't make up
1739  * for slow periods.  But arguably this is a feature.  In addition, we
1740  * ought to take the time used to write the data into account.
1741  *
1742  * During some phases of big transfers (file FOO is uptodate) this is
1743  * called with a small bytes_written every time.  As the kernel has to
1744  * round small waits up to guarantee that we actually wait at least the
1745  * requested number of microseconds, this can become grossly inaccurate.
1746  * We therefore keep track of the bytes we've written over time and only
1747  * sleep when the accumulated delay is at least 1 tenth of a second. */
1748 static void sleep_for_bwlimit(int bytes_written)
1749 {
1750         static struct timeval prior_tv;
1751         static long total_written = 0;
1752         struct timeval tv, start_tv;
1753         long elapsed_usec, sleep_usec;
1754
1755 #define ONE_SEC 1000000L /* # of microseconds in a second */
1756
1757         total_written += bytes_written;
1758
1759         gettimeofday(&start_tv, NULL);
1760         if (prior_tv.tv_sec) {
1761                 elapsed_usec = (start_tv.tv_sec - prior_tv.tv_sec) * ONE_SEC
1762                              + (start_tv.tv_usec - prior_tv.tv_usec);
1763                 total_written -= elapsed_usec * bwlimit / (ONE_SEC/1024);
1764                 if (total_written < 0)
1765                         total_written = 0;
1766         }
1767
1768         sleep_usec = total_written * (ONE_SEC/1024) / bwlimit;
1769         if (sleep_usec < ONE_SEC / 10) {
1770                 prior_tv = start_tv;
1771                 return;
1772         }
1773
1774         tv.tv_sec  = sleep_usec / ONE_SEC;
1775         tv.tv_usec = sleep_usec % ONE_SEC;
1776         select(0, NULL, NULL, NULL, &tv);
1777
1778         gettimeofday(&prior_tv, NULL);
1779         elapsed_usec = (prior_tv.tv_sec - start_tv.tv_sec) * ONE_SEC
1780                      + (prior_tv.tv_usec - start_tv.tv_usec);
1781         total_written = (sleep_usec - elapsed_usec) * bwlimit / (ONE_SEC/1024);
1782 }
1783
1784 void io_flush(int flush_it_all)
1785 {
1786         if (iobuf.out.len > iobuf.out_empty_len) {
1787                 if (flush_it_all) /* FULL_FLUSH: flush everything in the output buffers */
1788                         perform_io(iobuf.out.size - iobuf.out_empty_len, PIO_NEED_OUTROOM);
1789                 else /* NORMAL_FLUSH: flush at least 1 byte */
1790                         perform_io(iobuf.out.size - iobuf.out.len + 1, PIO_NEED_OUTROOM);
1791         }
1792         if (iobuf.msg.len)
1793                 perform_io(iobuf.msg.size, PIO_NEED_MSGROOM);
1794 }
1795
1796 void write_shortint(int f, unsigned short x)
1797 {
1798         char b[2];
1799         b[0] = (char)x;
1800         b[1] = (char)(x >> 8);
1801         write_buf(f, b, 2);
1802 }
1803
1804 void write_int(int f, int32 x)
1805 {
1806         char b[4];
1807         SIVAL(b, 0, x);
1808         write_buf(f, b, 4);
1809 }
1810
1811 void write_varint(int f, int32 x)
1812 {
1813         char b[5];
1814         uchar bit;
1815         int cnt = 4;
1816
1817         SIVAL(b, 1, x);
1818
1819         while (cnt > 1 && b[cnt] == 0)
1820                 cnt--;
1821         bit = ((uchar)1<<(7-cnt+1));
1822         if (CVAL(b, cnt) >= bit) {
1823                 cnt++;
1824                 *b = ~(bit-1);
1825         } else if (cnt > 1)
1826                 *b = b[cnt] | ~(bit*2-1);
1827         else
1828                 *b = b[cnt];
1829
1830         write_buf(f, b, cnt);
1831 }
1832
1833 void write_varlong(int f, int64 x, uchar min_bytes)
1834 {
1835         char b[9];
1836         uchar bit;
1837         int cnt = 8;
1838
1839         SIVAL(b, 1, x);
1840 #if SIZEOF_INT64 >= 8
1841         SIVAL(b, 5, x >> 32);
1842 #else
1843         if (x <= 0x7FFFFFFF && x >= 0)
1844                 memset(b + 5, 0, 4);
1845         else {
1846                 rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1847                 exit_cleanup(RERR_UNSUPPORTED);
1848         }
1849 #endif
1850
1851         while (cnt > min_bytes && b[cnt] == 0)
1852                 cnt--;
1853         bit = ((uchar)1<<(7-cnt+min_bytes));
1854         if (CVAL(b, cnt) >= bit) {
1855                 cnt++;
1856                 *b = ~(bit-1);
1857         } else if (cnt > min_bytes)
1858                 *b = b[cnt] | ~(bit*2-1);
1859         else
1860                 *b = b[cnt];
1861
1862         write_buf(f, b, cnt);
1863 }
1864
1865 /*
1866  * Note: int64 may actually be a 32-bit type if ./configure couldn't find any
1867  * 64-bit types on this platform.
1868  */
1869 void write_longint(int f, int64 x)
1870 {
1871         char b[12], * const s = b+4;
1872
1873         SIVAL(s, 0, x);
1874         if (x <= 0x7FFFFFFF && x >= 0) {
1875                 write_buf(f, s, 4);
1876                 return;
1877         }
1878
1879 #if SIZEOF_INT64 < 8
1880         rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1881         exit_cleanup(RERR_UNSUPPORTED);
1882 #else
1883         memset(b, 0xFF, 4);
1884         SIVAL(s, 4, x >> 32);
1885         write_buf(f, b, 12);
1886 #endif
1887 }
1888
1889 void write_buf(int f, const char *buf, size_t len)
1890 {
1891         size_t pos, siz;
1892
1893         if (f != iobuf.out_fd) {
1894                 safe_write(f, buf, len);
1895                 goto batch_copy;
1896         }
1897
1898         if (iobuf.out.size - iobuf.out.len < len)
1899                 perform_io(len, PIO_NEED_OUTROOM);
1900
1901         pos = iobuf.out.pos + iobuf.out.len; /* Must be set after any flushing. */
1902         if (pos >= iobuf.out.size)
1903                 pos -= iobuf.out.size;
1904
1905         /* Handle a split copy if we wrap around the end of the circular buffer. */
1906         if (pos >= iobuf.out.pos && (siz = iobuf.out.size - pos) < len) {
1907                 memcpy(iobuf.out.buf + pos, buf, siz);
1908                 memcpy(iobuf.out.buf, buf + siz, len - siz);
1909         } else
1910                 memcpy(iobuf.out.buf + pos, buf, len);
1911
1912         iobuf.out.len += len;
1913         total_data_written += len;
1914
1915   batch_copy:
1916         if (f == write_batch_monitor_out)
1917                 safe_write(batch_fd, buf, len);
1918 }
1919
1920 /* Write a string to the connection */
1921 void write_sbuf(int f, const char *buf)
1922 {
1923         write_buf(f, buf, strlen(buf));
1924 }
1925
1926 void write_byte(int f, uchar c)
1927 {
1928         write_buf(f, (char *)&c, 1);
1929 }
1930
1931 void write_vstring(int f, const char *str, int len)
1932 {
1933         uchar lenbuf[3], *lb = lenbuf;
1934
1935         if (len > 0x7F) {
1936                 if (len > 0x7FFF) {
1937                         rprintf(FERROR,
1938                                 "attempting to send over-long vstring (%d > %d)\n",
1939                                 len, 0x7FFF);
1940                         exit_cleanup(RERR_PROTOCOL);
1941                 }
1942                 *lb++ = len / 0x100 + 0x80;
1943         }
1944         *lb = len;
1945
1946         write_buf(f, (char*)lenbuf, lb - lenbuf + 1);
1947         if (len)
1948                 write_buf(f, str, len);
1949 }
1950
1951 /* Send a file-list index using a byte-reduction method. */
1952 void write_ndx(int f, int32 ndx)
1953 {
1954         static int32 prev_positive = -1, prev_negative = 1;
1955         int32 diff, cnt = 0;
1956         char b[6];
1957
1958         if (protocol_version < 30 || read_batch) {
1959                 write_int(f, ndx);
1960                 return;
1961         }
1962
1963         /* Send NDX_DONE as a single-byte 0 with no side effects.  Send
1964          * negative nums as a positive after sending a leading 0xFF. */
1965         if (ndx >= 0) {
1966                 diff = ndx - prev_positive;
1967                 prev_positive = ndx;
1968         } else if (ndx == NDX_DONE) {
1969                 *b = 0;
1970                 write_buf(f, b, 1);
1971                 return;
1972         } else {
1973                 b[cnt++] = (char)0xFF;
1974                 ndx = -ndx;
1975                 diff = ndx - prev_negative;
1976                 prev_negative = ndx;
1977         }
1978
1979         /* A diff of 1 - 253 is sent as a one-byte diff; a diff of 254 - 32767
1980          * or 0 is sent as a 0xFE + a two-byte diff; otherwise we send 0xFE
1981          * & all 4 bytes of the (non-negative) num with the high-bit set. */
1982         if (diff < 0xFE && diff > 0)
1983                 b[cnt++] = (char)diff;
1984         else if (diff < 0 || diff > 0x7FFF) {
1985                 b[cnt++] = (char)0xFE;
1986                 b[cnt++] = (char)((ndx >> 24) | 0x80);
1987                 b[cnt++] = (char)ndx;
1988                 b[cnt++] = (char)(ndx >> 8);
1989                 b[cnt++] = (char)(ndx >> 16);
1990         } else {
1991                 b[cnt++] = (char)0xFE;
1992                 b[cnt++] = (char)(diff >> 8);
1993                 b[cnt++] = (char)diff;
1994         }
1995         write_buf(f, b, cnt);
1996 }
1997
1998 /* Receive a file-list index using a byte-reduction method. */
1999 int32 read_ndx(int f)
2000 {
2001         static int32 prev_positive = -1, prev_negative = 1;
2002         int32 *prev_ptr, num;
2003         char b[4];
2004
2005         if (protocol_version < 30)
2006                 return read_int(f);
2007
2008         read_buf(f, b, 1);
2009         if (CVAL(b, 0) == 0xFF) {
2010                 read_buf(f, b, 1);
2011                 prev_ptr = &prev_negative;
2012         } else if (CVAL(b, 0) == 0)
2013                 return NDX_DONE;
2014         else
2015                 prev_ptr = &prev_positive;
2016         if (CVAL(b, 0) == 0xFE) {
2017                 read_buf(f, b, 2);
2018                 if (CVAL(b, 0) & 0x80) {
2019                         b[3] = CVAL(b, 0) & ~0x80;
2020                         b[0] = b[1];
2021                         read_buf(f, b+1, 2);
2022                         num = IVAL(b, 0);
2023                 } else
2024                         num = (UVAL(b,0)<<8) + UVAL(b,1) + *prev_ptr;
2025         } else
2026                 num = UVAL(b, 0) + *prev_ptr;
2027         *prev_ptr = num;
2028         if (prev_ptr == &prev_negative)
2029                 num = -num;
2030         return num;
2031 }
2032
2033 /* Read a line of up to bufsiz-1 characters into buf.  Strips
2034  * the (required) trailing newline and all carriage returns.
2035  * Returns 1 for success; 0 for I/O error or truncation. */
2036 int read_line_old(int fd, char *buf, size_t bufsiz)
2037 {
2038         bufsiz--; /* leave room for the null */
2039         while (bufsiz > 0) {
2040                 assert(fd != iobuf.in_fd);
2041                 if (safe_read(fd, buf, 1) == 0)
2042                         return 0;
2043                 if (*buf == '\0')
2044                         return 0;
2045                 if (*buf == '\n')
2046                         break;
2047                 if (*buf != '\r') {
2048                         buf++;
2049                         bufsiz--;
2050                 }
2051         }
2052         *buf = '\0';
2053         return bufsiz > 0;
2054 }
2055
2056 void io_printf(int fd, const char *format, ...)
2057 {
2058         va_list ap;
2059         char buf[BIGPATHBUFLEN];
2060         int len;
2061
2062         va_start(ap, format);
2063         len = vsnprintf(buf, sizeof buf, format, ap);
2064         va_end(ap);
2065
2066         if (len < 0)
2067                 exit_cleanup(RERR_STREAMIO);
2068
2069         if (len > (int)sizeof buf) {
2070                 rprintf(FERROR, "io_printf() was too long for the buffer.\n");
2071                 exit_cleanup(RERR_STREAMIO);
2072         }
2073
2074         write_sbuf(fd, buf);
2075 }
2076
2077 /* Setup for multiplexing a MSG_* stream with the data stream. */
2078 void io_start_multiplex_out(int fd)
2079 {
2080         io_flush(FULL_FLUSH);
2081
2082         if (msgs2stderr && DEBUG_GTE(IO, 2))
2083                 rprintf(FINFO, "[%s] io_start_multiplex_out(%d)\n", who_am_i(), fd);
2084
2085         iobuf.out_empty_len = 4; /* See also OUT_MULTIPLEXED */
2086         io_start_buffering_out(fd);
2087
2088         iobuf.raw_data_header_pos = iobuf.out.pos + iobuf.out.len;
2089         iobuf.out.len += 4;
2090 }
2091
2092 /* Setup for multiplexing a MSG_* stream with the data stream. */
2093 void io_start_multiplex_in(int fd)
2094 {
2095         if (msgs2stderr && DEBUG_GTE(IO, 2))
2096                 rprintf(FINFO, "[%s] io_start_multiplex_in(%d)\n", who_am_i(), fd);
2097
2098         iobuf.in_multiplexed = True; /* See also IN_MULTIPLEXED */
2099         io_start_buffering_in(fd);
2100 }
2101
2102 int io_end_multiplex_in(int mode)
2103 {
2104         int ret = iobuf.in_multiplexed ? iobuf.in_fd : -1;
2105
2106         if (msgs2stderr && DEBUG_GTE(IO, 2))
2107                 rprintf(FINFO, "[%s] io_end_multiplex_in(mode=%d)\n", who_am_i(), mode);
2108
2109         iobuf.in_multiplexed = False;
2110         if (mode == MPLX_SWITCHING)
2111                 iobuf.raw_input_ends_before = 0;
2112         else
2113                 assert(iobuf.raw_input_ends_before == 0);
2114         if (mode != MPLX_TO_BUFFERED)
2115                 io_end_buffering_in(mode);
2116
2117         return ret;
2118 }
2119
2120 int io_end_multiplex_out(int mode)
2121 {
2122         int ret = iobuf.out_empty_len ? iobuf.out_fd : -1;
2123
2124         if (msgs2stderr && DEBUG_GTE(IO, 2))
2125                 rprintf(FINFO, "[%s] io_end_multiplex_out(mode=%d)\n", who_am_i(), mode);
2126
2127         if (mode != MPLX_TO_BUFFERED)
2128                 io_end_buffering_out(mode);
2129         else
2130                 io_flush(FULL_FLUSH);
2131
2132         iobuf.out.len = 0;
2133         iobuf.out_empty_len = 0;
2134
2135         return ret;
2136 }
2137
2138 void start_write_batch(int fd)
2139 {
2140         /* Some communication has already taken place, but we don't
2141          * enable batch writing until here so that we can write a
2142          * canonical record of the communication even though the
2143          * actual communication so far depends on whether a daemon
2144          * is involved. */
2145         write_int(batch_fd, protocol_version);
2146         if (protocol_version >= 30)
2147                 write_byte(batch_fd, inc_recurse);
2148         write_int(batch_fd, checksum_seed);
2149
2150         if (am_sender)
2151                 write_batch_monitor_out = fd;
2152         else
2153                 write_batch_monitor_in = fd;
2154 }
2155
2156 void stop_write_batch(void)
2157 {
2158         write_batch_monitor_out = -1;
2159         write_batch_monitor_in = -1;
2160 }