1 NEWS for rsync 3.0.3 (29 Jun 2008)
2 Protocol: 30 (unchanged)
7 - Fixed a wildcard matching problem in the daemon when a module has
10 - Fixed a crash bug in the hard-link code.
12 - Fixed the sending of xattr directory information when the code finds a
13 --link-dest or --copy-dest directory with unchanged xattrs -- the
14 destination directory now gets these unchanged xattrs properly applied.
16 - Fixed an xattr-sending glitch that could cause an "Internal abbrev"
19 - Fixed the combination of --xattrs and --backup.
21 - The generator no longer allows a '.' dir to be excluded by a daemon-
24 - Fixed deletion handling when copying a single, empty directory (with no
25 files) to a differently named, non-existent directory.
27 - Fixed the conversion of spaces into dashes in the %M log escape.
29 - Fixed several places in the code that were not returning the right
30 errno when a function failed.
32 - Fixed the backing up of a device or special file into a backup dir.
34 - Moved the setting of the socket options prior to the connect().
36 - If rsync exits in the middle of a --progress output, it now outputs a
37 newline to help prevent the progress line from being overwritten.
39 - Fixed a problem with how a destination path with a trailing slash or
40 a trailing dot-dir was compared against the daemon excludes.
42 - Fixed the sending of large (size > 16GB) files when talking to an older
43 rsync (protocols < 30): we now use a compatible block size limit.
45 - If a file's length is so huge that we overflow a checksum buffer count
46 (i.e. several hundred TB), warn the user and avoid sending an invalid
47 checksum struct over the wire.
49 - If a source arg is excluded, --relative no longer adds the excluded
50 arg's implied dirs to the transfer. This fix also made the exclude
51 check happen in the better place in the sending code.
53 - Use the overflow_exit() function for overflows, not out_of_memory().
55 - Improved the code to better handle a system that has only 32-bit file
60 - The rsyncd.conf manpage now consistently refers to the parameters in
61 the daemon config file as "parameters".
63 - The description of the --inplace option was improved.
67 - Added a new script in the support directory, deny-rsync, which allows
68 an admin to (temporarily) replace the rsync command with a script that
69 sends an error message to the remote client via the rsync protocol.
73 - Fixed a testcase failure if the tests are run as root and made some
74 compatibility improvements.
76 - Improved the daemon tests, including checking module comments, the
77 listing of files, and the ensuring that daemon excludes can't affect
80 - Improved some build rules for those that build in a separate directory
81 from the source, including better install rules for the man pages, and
82 the fixing of a proto.h-tstamp rule that could make the binaries get
83 rebuild without cause.
85 - Improved the testsuite to work around a problem with some utilities
86 (e.g. cp -p & touch -r) rounding sub-second timestamps.
88 - Ensure that the early patches don't cause any generated-file hunks to
89 bleed-over into patches that follow.
92 NEWS for rsync 3.0.2 (8 Apr 2008)
93 Protocol: 30 (unchanged)
98 - Fixed a potential buffer overflow in the xattr code.
106 - The RPM spec file was improved to install more useful files.
108 - A few developer-oriented scripts were moved from the support dir
109 to the packaging dir.
112 NEWS for rsync 3.0.1 (3 Apr 2008)
113 Protocol: 30 (unchanged)
116 NOTABLE CHANGES IN BEHAVIOR:
118 - Added the 'c'-flag to the itemizing of non-regular files so that the
119 itemized output doesn't get hidden if there were no attribute changes,
120 and also so that the itemizing of a --copy-links run will distinguish
121 between copying an identical non-regular file and the creation of a
122 revised version with a new value (e.g. a changed symlink referent, a
123 new device number, etc.).
127 - Fixed a crash bug when a single-use rsync daemon (via remote shell) was
128 run without specifying a --config=FILE option.
130 - Fixed a crash when backing up a directory that has a default ACL.
132 - Fixed a bug in the handling of xattr values that could cause rsync to
133 not think that a file's extended attributes are up-to-date.
135 - Fixed the working of --fake-super with --link-dest and --xattrs.
137 - Fixed a hang when combining --dry-run with --remove-source-files.
139 - Fixed a bug with --iconv's handling of files that cannot be converted:
140 a failed name can no longer cause a transfer failure.
142 - Fixed the building of the rounding.h file on systems that need custom
143 CPPFLAGS to be used. Also improved the error reporting if the building
146 - Fixed the use of the --protect-args (-s) option when talking to a daemon.
148 - Fixed the --ignore-existing option's protection of files on the receiver
149 that are non-regular files on the sender (e.g. if a symlink or a dir on
150 the sender is trying to replace a file on the receiver). The reverse
151 protection (protecting a dir/symlink/device from being replaced by a
152 file) was already working.
154 - Fixed an assert failure if --hard-links is combined with an option that
155 can skip a file in a set of hard-linked files (i.e. --ignore-existing,
156 --append, etc.), without skipping all the files in the set.
158 - Avoid setting the modify time on a directory that already has the right
159 modify time set. This avoids tweaking the dir's ctime.
161 - Improved the daemon-exclude handling to do a better job of applying the
162 exclude rules to path entries. It also sends the user an error just as
163 if the files were actually missing (instead of silently ignoring the
164 user's args), and avoids sending the user the filter-action messages
165 for these non-user-initiated rules.
167 - Fixed some glitches with the dry-run code's missing-directory
168 handling, including a problem when combined with --fuzzy.
170 - Fixed some glitches with the skipped-directory handling.
172 - Fixed the 'T'-flag itemizing of symlinks when --time isn't preserved.
174 - Fixed a glitch in the itemizing of permissions with the -E option.
176 - The --append option's restricting of transfers to those that add data no
177 longer prevents the updating of non-content changes to otherwise up-to-
178 date files (i.e. those with the same content but differing permissions,
179 ownership, xattrs, etc.).
181 - Don't allow --fake-super to be specified with -XX (double --xattrs)
182 because the options conflict. If a daemon has "fake super" enabled,
183 it automatically downgrades a -XX request to -X.
185 - Fixed a couple bugs in the parsing of daemon-config excludes that could
186 make a floating exclude rule get treated as matching an absolute path.
188 - A daemon doesn't try to auto-refuse the "iconv" option if iconv-support
189 wasn't compiled in to the daemon (avoiding a warning in the logs).
191 - Fixed the inclusion of per-dir merge files from implied dirs.
193 - Fixed the support/rrsync script to work with the latest options that
194 rsync sends (including its flag-specifying use of -e to the server).
198 - Added the --old-dirs (--old-d) option to make it easier for a user to
199 ask for file-listings with older rsync versions (this is easier than
200 having to type "-r --exclude='/*/*'" manually).
202 - When getting an error while asking an older rsync daemon for a file
203 listing, rsync will try to notice if the error is a rejection of the
204 --dirs (-d) option and let the user know how to work around the issue.
206 - Added a few more --no-OPTION overrides.
208 - Improved the documentation of the --append option.
210 - Improved the documentation of the filter/exclude/include daemon
215 - Fixed a couple minor bugs in the included popt library (ones which I
216 sent to the official popt project for inclusion in the 1.14 release).
218 - Fixed a stat() call that should have been do_stat() so that the proper
219 normal/64-bit stat() function gets called. (Was in an area that should
220 not have caused problems, though.)
222 - Changed the file-glob code to do a directory scan without using the
223 "glob" and "glob.h". This lets us do the globbing with less memory
224 churn, and also avoid adding daemon-excluded items to the returned
229 - The configure script tries to get the user's compiler to not warn about
230 unused function parameters if the build is not including one or more of
231 the ACL/xattrs/iconv features.
233 - The configure script now has better checks for figuring out if the
234 included popt code should be used or not.
236 - Fixed two testsuite glitches: avoid a failure if someone's "cd" command
237 outputs the current directory when cd-ing to a relative path, and made
238 the itemized test query how rsync was built to determine if it should
239 expect hard-linked symlinks or not.
241 - Updated the testsuite to verify that various bug fixes remain fixed.
243 - The RPM spec file was updated to have: (1) comments for how to use the
244 rsync-patch tar file, and (2) an /etc/xinetd.d/rsync file.
246 - Updated the build scripts to work with a revised FTP directory
250 NEWS for rsync 3.0.0 (1 Mar 2008)
251 Protocol: 30 (changed)
254 NOTABLE CHANGES IN BEHAVIOR:
256 - The handling of implied directories when using --relative has changed to
257 send them as directories (e.g. no implied dir is ever sent as a symlink).
258 This avoids unexpected behavior and should not adversely affect most
259 people. If you're one of those rare individuals who relied upon having
260 an implied dir be duplicated as a symlink, you should specify the
261 transfer of the symlink and the transfer of the referent directory as
262 separate args. (See also --keep-dirlinks and --no-implied-dirs.)
263 Also, exclude rules no longer have a partial effect on implied dirs.
265 - Requesting a remote file-listing without specifying -r (--recursive) now
266 sends the -d (--dirs) option to the remote rsync rather than sending -r
267 along with an extra exclude of /*/*. If the remote rsync does not
268 understand the -d option (i.e. it is 2.6.3 or older), you will need to
269 either turn off -d (--no-d), or specify -r --exclude='/*/*' manually.
271 - In --dry-run mode, the last line of the verbose summary text is output
272 with a "(DRY RUN)" suffix to help remind you that no updates were made.
273 Similarly, --only-write-batch outputs "(BATCH ONLY)".
275 - A writable rsync daemon with "use chroot" disabled now defaults to a
276 symlink-munging behavior designed to make symlinks safer while also
277 allowing absolute symlinks to be stored and retrieved. This also has
278 the effect of making symlinks unusable while they're in the daemon's
279 hierarchy. See the daemon's "munge symlinks" parameter for details.
281 - Starting up an extra copy of an rsync daemon will not clobber the pidfile
282 for the running daemon -- if the pidfile exists, the new daemon will exit
283 with an error. This means that your wrapper script that starts the rsync
284 daemon should be made to handle lock-breaking (if you want any automatic
285 breaking of locks to be done).
289 - A daemon with "use chroot = no" and excluded items listed in the daemon
290 config file now properly checks an absolute-path arg specified for these
291 options: --compare-dest, --link-dest, --copy-dest, --partial-dir,
292 --backup-dir, --temp-dir, and --files-from.
294 - A daemon can now be told to disable all user- and group-name translation
295 on a per-module basis. This avoids a potential problem with a writable
296 daemon module that has "use chroot" enabled -- if precautions weren't
297 taken, a user could try to add a missing library and get rsync to use
298 it. This makes rsync safer by default, and more configurable when id-
299 translation is not desired. See the daemon's "numeric ids" parameter
302 - A chroot daemon can now indicate which part of its path should affect the
303 chroot call, and which part should become an inside-chroot path for the
304 module. This allows you to have outside-the-transfer paths (such as for
305 libraries) even when you enable chroot protection. The idiom used in the
306 rsyncd.conf file is: path = /chroot/dirs/./dirs/inside
308 - If a file's data arrived successfully on the receiving side but the
309 rename of the temporary file to the destination file failed AND the
310 --remove-source-files (or the deprecated --remove-sent-files) option
311 was specified, rsync no longer erroneously removes the associated
314 - Fixed the output of -ii when combined with one of the --*-dest options:
315 it now itemizes all the items, not just the changed ones.
317 - Made the output of all file types consistent when using a --*-dest
318 option. Prior versions would output too many creation events for
321 - The code that waits for a child pid now handles being interrupted by a
322 signal. This fixes a problem with the pre-xfer exec function not being
323 able to get the exit status from the script.
325 - A negated filter rule (i.e. with a '!' modifier) no longer loses the
326 negation when sending the filter rules to the remote rsync.
328 - Fixed a problem with the --out-format (aka --log-format) option %f: it
329 no longer outputs superfluous directory info for a non-daemon rsync.
331 - Fixed a problem with -vv (double --verbose) and --stats when "pushing"
332 files (which includes local copies). Version 2.6.9 would complete the
333 copy, but exit with an error when the receiver output its memory stats.
335 - If --password-file is used on a non-daemon transfer, rsync now complains
336 and exits. This should help users figure out that they can't use this
337 option to control a remote shell's password prompt.
339 - Make sure that directory permissions of a newly-created destination
340 directory are handled right when --perms is left off.
342 - The itemized output of a newly-created destination directory is now
343 output as a creation event, not a change event.
345 - Improved --hard-link so that more corner cases are handled correctly
346 when combined with options such as --link-dest and/or --ignore-existing.
348 - The --append option no longer updates a file that has the same size.
350 - Fixed a bug when combining --backup and --backup-dir with --inplace:
351 any missing backup directories are now created.
353 - Fixed a bug when using --backup and --inplace with --whole-file or
354 --read-batch: backup files are actually created now.
356 - The daemon pidfile is checked and created sooner in the startup sequence.
358 - If a daemon module's "path" value is not an absolute pathname, the code
359 now makes it absolute internally (making it work properly).
361 - Ensure that a temporary file always has owner-write permission while we
362 are writing to it. This avoids problems with some network filesystems
363 when transfering read-only files.
365 - Any errors output about password-file reading no longer cause an error at
366 the end of the run about a partial transfer.
368 - The --read-batch option for protocol 30 now ensures that several more
369 options are set correctly for the current batch file: --iconv, --acls,
370 --xattrs, --inplace, --append, and --append-verify.
372 - Using --only-write-batch to a daemon receiver now works properly (older
373 versions would update some files while writing the batch).
375 - Avoid outputting a "file has vanished" message when the file is a broken
376 symlink and --copy-unsafe-links or --copy-dirlinks is used (the code
377 already handled this for --copy-links).
379 - Fixed the combination of --only-write-batch and --dry-run.
381 - Fixed rsync's ability to remove files that are not writable by the file's
382 owner when rsync is running as the same user.
386 - A new incremental-recursion algorithm is now used when rsync is talking
387 to another 3.x version. This starts the transfer going more quickly
388 (before all the files have been found), and requires much less memory.
389 See the --recursive option in the manpage for some restrictions.
391 - Lowered memory use in the non-incremental-recursion algorithm for typical
392 option values (usually saving from 21-29 bytes per file).
394 - The default --delete algorithm is now --delete-during when talking to a
395 3.x rsync. This is a faster scan than using --delete-before (which is
396 the default when talking to older rsync versions), and is compatible with
397 the new incremental recursion mode.
399 - Rsync now allows multiple remote-source args to be specified rather than
400 having to rely on a special space-splitting side-effect of the remote-
401 shell. Additional remote args must specify the same host or an empty one
402 (e.g. empty: :file1 or ::module/file2). For example, this means that
403 local use of brace expansion now works: rsync -av host:dir/{f1,f2} .
405 - Added the --protect-args (-s) option, that tells rsync to send most of
406 the command-line args at the start of the transfer rather than as args
407 to the remote-shell command. This protects them from space-splitting,
408 and only interprets basic wildcard special shell characters (*?[).
410 - Added the --delete-delay option, which is a more efficient way to delete
411 files at the end of the transfer without needing a separate delete pass.
413 - Added the --acls (-A) option to preserve Access Control Lists. This is
414 an improved version of the prior patch that was available, and it even
415 supports OS X ACLs. If you need to have backward compatibility with old,
416 ACL-patched versions of rsync, apply the acls.diff file from the patches
419 - Added the --xattrs (-X) option to preserve extended attributes. This is
420 an improved version of the prior patch that was available, and it even
421 supports OS X xattrs (which includes their resource fork data). If you
422 need to have backward compatibility with old, xattr-patched versions of
423 rsync, apply the xattrs.diff file from the patches dir.
425 - Added the --fake-super option that allows a non-super user to preserve
426 all attributes of a file by using a special extended-attribute idiom.
427 It even supports the storing of foreign ACL data on your backup server.
428 There is also an analogous "fake super" parameter for an rsync daemon.
430 - Added the --iconv option, which allows rsync to convert filenames from
431 one character-set to another during the transfer. The default is to
432 make this feature available as long as your system has iconv_open().
433 If compilation fails, specify --disable-iconv to configure, and then
434 rebuild. If you want rsync to perform character-set conversions by
435 default, you can specify --enable-iconv=CONVERT_STRING with the default
436 value for the --iconv option that you wish to use. For example,
437 "--enable-iconv=." is a good choice. See the rsync manpage for an
438 explanation of the --iconv option's settings.
440 - A new daemon config parameter, "charset", lets you control the character-
441 set that is used during an --iconv transfer to/from a daemon module. You
442 can also set your daemon to refuse "no-iconv" if you want to force the
443 client to use an --iconv transfer (requiring an rsync 3.x client).
445 - Added the --skip-compress=LIST option to override the default list of
446 file suffixes that will not be compressed when using --compress (-z).
448 - The daemon's default for "dont compress" was extended to include:
449 *.7z *.mp[34] *.mov *.avi *.ogg *.jpg *.jpeg
450 The name-matching routine was also optimized to run more quickly.
452 - The --max-delete option now outputs a warning if it skipped any file
453 deletions, including a count of how many deletions were skipped. (Older
454 versions just silently stopped deleting things.)
456 - You may specify --max-delete=0 to a 3.0.0 client to request that it warn
457 about extraneous files without deleting anything. If you're not sure
458 what version the client is, you can use the less-obvious --max-delete=-1,
459 as both old and new versions will treat that as the same request (though
460 older versions don't warn).
462 - The --hard-link option now uses less memory on both the sending and
463 receiving side for all protocol versions. For protocol 30, the use of a
464 hashtable on the sending side allows us to more efficiently convey to the
465 receiver what files are linked together. This reduces the amount of data
466 sent over the socket by a considerable margin (rather than adding more
467 data), and limits the in-memory storage of the device+inode information
468 to just the sending side for the new protocol 30, or to the receiving
469 side when speaking an older protocol (note that older rsync versions kept
470 the device+inode information on both sides).
472 - The filter rules now support a perishable ("p") modifier that marks rules
473 that should not have an effect in a directory that is being deleted. e.g.
474 -f '-p .svn/' would only affect "live" .svn directories.
476 - Rsync checks all the alternate-destination args for validity (e.g.
477 --link-dest). This lets the user know when they specified a directory
480 - If we get an ENOSYS error setting the time on a symlink, we don't
481 complain about it anymore (for those systems that even support the
482 setting of the modify-time on a symlink).
484 - Protocol 30 now uses MD5 checksums instead of MD4.
486 - Changed the --append option to not checksum the existing data in the
487 destination file, which speeds up file appending.
489 - Added the --append-verify option, which works like the older --append
490 option (verifying the existing data in the destination file). For
491 compatibility with older rsync versions, any use of --append that is
492 talking protocol 29 or older will revert to the --append-verify method.
494 - Added the --contimeout=SECONDS option that lets the user specify a
495 connection timeout for rsync daemon access.
497 - Documented and extended the support for the RSYNC_CONNECT_PROG variable
498 that can be used to enhance the client side of a daemon connection.
500 - Improved the dashes and double-quotes in the nroff manpage output.
502 - Rsync now supports a lot more --no-OPTION override options.
506 - The file-list sorting algorithm now uses a sort that keeps any same-
507 named items in the same order as they were specified. This allows
508 rsync to always ensure that the first of the duplicates is the one
509 that will be included in the copy. The new sort is also faster
510 than the glibc version of qsort() and mergesort().
512 - Rsync now supports the transfer of 64-bit timestamps (time_t values).
514 - Made the file-deletion code use a little less stack when recursing
515 through a directory hierarchy of extraneous files.
517 - Fixed a build problem with older (2.x) versions of gcc.
519 - Added some isType() functions that make dealing with signed characters
520 easier without forcing variables via casts.
522 - Changed strcat/strcpy/sprintf function calls to use safer versions.
524 - Upgraded the included popt version to 1.10.2 and improved its use of
525 string-handling functions.
527 - Added missing prototypes for compatibility functions from the lib dir.
529 - Configure determines if iconv() has a const arg, allowing us to avoid a
532 - Made the sending of some numbers more efficient for protocol 30.
534 - Make sure that a daemon process doesn't mind if the client was weird and
535 omitted the --server option.
537 - There are more internal logging categories available in protocol 30 than
538 the age-old FINFO and FERROR, including FERROR_XFER and FWARN. These new
539 categories allow some errors and warnings to go to stderr without causing
540 an erroneous end-of-run warning about some files not being able to be
543 - Improved the use of "const" on pointers.
545 - Improved J.W.'s pool_alloc routines to add a way of incrementally freeing
546 older sections of a pool's memory.
548 - The getaddrinfo.c compatibility code in the "lib" dir was replaced with
549 some new code (derived from samba, derived from PostgreSQL) that has a
550 better license than the old code.
554 - Rsync is now licensed under the GPLv3 or later.
556 - Rsync is now being maintained in a "git" repository instead of CVS
557 (though the old CVS repository still exists for historical access).
558 Several maintenance scripts were updated to work with git.
560 - Generated files are no longer committed into the source repository. The
561 autoconf and autoheader commands are now automatically run during the
562 normal use of "configure" and "make". The latest dev versions of all
563 generated files can also be copied from the samba.org web site (see the
564 prepare-source script's fetch option).
566 - The "patches" directory of diff files is now built from branches in the
567 rsync git repository (branch patch/FOO creates file patches/FOO.diff).
568 This directory is now distributed in a separate separate tar file named
569 rsync-patches-VERSION.tar.gz instead of the main rsync-VERSION.tar.gz.
571 - The proto.h file is now built using a simple perl script rather than a
572 complex awk script, which proved to be more widely compatible.
574 - When running the tests, we now put our per-test temp dirs into a sub-
575 directory named testtmp (which is created, if missing). This allows
576 someone to symlink the testtmp directory to another filesystem (which is
577 useful if the build dir's filesystem does not support ACLs and xattrs,
578 but another filesystem does).
580 - Rsync now has a way of handling protocol-version changes during the
581 development of a new protocol version. This causes any out-of-sync
582 versions to speak an older protocol rather than fail in a cryptic manner.
583 This addition makes it safer to deploy a pre-release version that may
584 interact with the public. This new exchange of sub-version info does not
585 interfere with the {MIN,MAX}_PROTOCOL_VERSION checking algorithm (which
586 does not have enough range to allow the main protocol number to be
587 incremented for every minor tweak in that happens during development).
589 - The csprotocol.txt file was updated to mention the daemon protocol change
590 in the 3.0.0 release.
593 NEWS for rsync 2.6.9 (6 Nov 2006)
594 Protocol: 29 (unchanged)
599 - If rsync is interrupted via a handled signal (such as SIGINT), it will
600 once again clean-up its temp file from the destination dir.
602 - Fixed an overzealous sanitizing bug in the handling of the --link-dest,
603 --copy-dest, and --compare-dest options to a daemon without chroot: if
604 the copy's destination dir is deeper than the top of the module's path,
605 these options now accept a safe number of parent-dir (../) references
606 (since these options are relative to the destination dir). The old code
607 incorrectly chopped off all "../" prefixes for these options, no matter
608 how deep the destination directory was in the module's hierarchy.
610 - Fixed a bug where a deferred info/error/log message could get sent
611 directly to the sender instead of being handled by rwrite() in the
612 generator. This fixes an "unexpected tag 3" fatal error, and should
613 also fix a potential problem where a deferred info/error message from
614 the receiver might bypass the log file and get sent only to the client
615 process. (These problems could only affect an rsync daemon that was
618 - Fixed a bug when --inplace was combined with a --*-dest option and we
619 update a file's data using an alternate basis file. The code now
620 notices that it needs to copy the matching data from the basis file
621 instead of (wrongly) assuming that it was already present in the file.
623 - Fixed a bug where using --dry-run with a --*-dest option with a path
624 relative to a directory that does not yet exist: the affected option
625 gets its proper path value so that the output of the dry-run is right.
627 - Fixed a bug in the %f logfile escape when receiving files: the
628 destination path is now included in the output (e.g. you can now tell
629 when a user specifies a subdir inside a module).
631 - If the receiving side fails to create a directory, it will now skip
632 trying to update everything that is inside that directory.
634 - If --link-dest is specified with --checksum but without --times, rsync
635 will now allow a hard-link to be created to a matching link-dest file
636 even when the file's modify-time doesn't match the server's file.
638 - The daemon now calls more timezone-using functions prior to doing a
639 chroot. This should help some C libraries to generate proper timestamps
640 from inside a chrooted daemon (and to not try to access /etc/timezone
641 over and over again).
643 - Fixed a bug in the handling of an absolute --partial-dir=ABS_PATH option:
644 it now deletes an alternate basis file from the partial-dir that was used
645 to successfully update a destination file.
647 - Fixed a bug in the handling of --delete-excluded when using a per-dir
648 merge file: the merge file is now honored on the receiving side, and
649 only its unqualified include/exclude commands are ignored (just as is
650 done for global include/excludes).
652 - Fixed a recent bug where --delete was not working when transferring from
653 the root (/) of the filesystem with --relative enabled.
655 - Fixed a recent bug where an --exclude='*' could affect the root (/) of
656 the filesystem with --relative enabled.
658 - When --inplace creates a file, it is now created with owner read/write
659 permissions (0600) instead of no permissions at all. This avoids a
660 problem continuing a transfer that was interrupted (since --inplace
661 will not update a file that has no write permissions).
663 - If either --remove-source-files or --remove-sent-files is enabled and we
664 are unable to remove the source file, rsync now outputs an error.
666 - Fixed a bug in the daemon's "incoming chmod" rule: newly-created
667 directories no longer get the 'F' (file) rules applied to them.
669 - Fixed an infinite loop bug when a filter rule was rejected due to being
672 - When the server receives a --partial-dir option from the client, it no
673 longer runs the client-side code that adds an assumed filter rule (since
674 the client will be sending us the rules in the usual manner, and they
675 may have chosen to override the auto-added rule).
679 - Added the --log-file=FILE and --log-file-format=FORMAT options. These
680 can be used to tell any rsync to output what it is doing to a log file.
681 They work with a client rsync, a non-daemon server rsync (see the man
682 page for instructions), and also allows the overriding of rsyncd.conf
683 settings when starting a daemon.
685 - The --log-format option was renamed to be --out-format to avoid confusing
686 it with affecting the log-file output. (The old option remains as an
687 alias for the new to preserve backward compatibility.)
689 - Made "log file" and "syslog facility" settable on a per-module basis in
690 the daemon's config file.
692 - Added the --remove-source-files option as a replacement for the (now
693 deprecated) --remove-sent-files option. This new option removes all
694 non-dirs from the source directories, even if the file was already
695 up-to-date. This fixes a problem where interrupting an rsync that
696 was using --remove-sent-files and restarting it could leave behind
697 a file that the earlier rsync synchronized, but didn't get to remove.
698 (The deprecated --remove-sent-files is still understood for now, and
699 still behaves in the same way as before.)
701 - Added the option --no-motd to suppress the message-of-the-day output
702 from a daemon when doing a copy. (See the manpage for a caveat.)
704 - Added a new environment variable to the pre-/post-xfer exec commands (in
705 the daemon's config file): RSYNC_PID. This value will be the same in
706 both the pre- and post-xfer commands, so it can be used as a unique ID
707 if the pre-xfer command wants to cache some arg/request info for the
712 - Did a code audit using IBM's code-checker program and made several
713 changes, including: replacing most of the strcpy() and sprintf()
714 calls with strlcpy(), snprintf(), and memcpy(), adding a 0-value to
715 an enum that had been intermingling a literal 0 with the defined enum
716 values, silencing some uninitialized memory checks, marking some
717 functions with a "noreturn" attribute, and changing an "if" that
718 could never succeed on some platforms into a pre-processor directive
719 that conditionally compiles the code.
721 - Fixed a potential bug in f_name_cmp() when both the args are a
722 top-level "." dir (which doesn't happen in normal operations).
724 - Changed exit_cleanup() so that it can never return instead of exit.
725 The old code might return if it found the exit_cleanup() function
726 was being called recursively. The new code is segmented so that
727 any recursive calls move on to the next step of the exit-processing.
729 - The macro WIFEXITED(stat) will now be defined if the OS didn't already
734 - The acls.diff and xattrs.diff patches have received a bunch of work to
735 make them much closer to being acceptable in the main distribution.
736 The xattrs patch also has some preliminary Mac OS X and FreeBSD
737 compatibility code that various system types to exchange extended
740 - A new diff in the patches dir, fake-root.diff, allows rsync to
741 maintain a backup hierarchy with full owner, group, and device info
742 without actually running as root. It does this using a special
743 extended attribute, so it depends on xattrs.diff (which depends on
746 - The rsync.yo and rsyncd.conf.yo files have been updated to work
747 better with the latest yodl 2.x releases.
749 - Updated config.guess and config.sub to their 2006-07-02 versions.
751 - Updated various files to include the latest FSF address and to have
752 consistent opening comments.
755 NEWS for rsync 2.6.8 (22 Apr 2006)
756 Protocol: 29 (unchanged)
761 - Fixed a bug in the exclude code where an anchored exclude without any
762 wildcards fails to match an absolute source arg, but only when --relative
765 - Improved the I/O code for the generator to fix a potential hang when the
766 receiver gets an EOF on the socket but the generator's select() call
767 never indicates that the socket is writable for it to be notified about
768 the EOF. (This can happen when using stunnel).
770 - Fixed a problem with the file-reading code where a failed read (such as
771 that caused by a bad sector) would not advance the file's read-position
772 beyond the failed read's data.
774 - Fixed a logging bug where the "log file" directive was not being honored
775 in a single-use daemon (one spawned by a remote-shell connection or by
778 - If rsync cannot honor the --delete option, we output an error and exit
779 instead of silently ignoring the option.
781 - Fixed a bug in the --link-dest code that prevented special files (such as
782 fifos) from being linked.
784 - The ability to hard-link symlinks and special files is now determined at
785 configure time instead of at runtime. This fixes a bug with --link-dest
786 creating a hard-link to a symlink's referent on a BSD system.
790 - In daemon mode, if rsync fails to bind to the requested port, the
791 error(s) returned by socket() and/or bind() are now logged.
793 - When we output a fatal error, we now output the version of rsync in the
796 - Improved the documentation for the --owner and --group options.
798 - The rsyncstats script in "support" has an improved line-parsing regex
799 that is easier to read and also makes it to parse syslog-generated lines.
801 - A new script in "support": file-attr-restore, can be used to restore the
802 attributes of a file-set (the permissions, ownership, and group info)
803 taken from the cached output of a "find ARG... -ls" command.
807 - Removed the unused function write_int_named(), the unused variable
808 io_read_phase, and the rarely used variable io_write_phase. This also
809 elides the confusing 'phase "unknown"' part of one error message.
811 - Removed two unused configure checks and two related (also unused)
812 compatibility functions.
814 - The xattrs.diff patch received a security fix that prevents a potential
815 buffer overflow in the receive_xattr() code.
817 - The acls.diff patch has been improved quite a bit, with more to come.
819 - A new patch was added: log-file.diff. This contains an early version of
820 a future option, --log-file=FILE, that will allow any rsync to log its
821 actions to a file (something that only a daemon supports at present).
824 NEWS for rsync 2.6.7 (11 Mar 2006)
825 Protocol: 29 (unchanged)
830 - The letter 'D' in the itemized output was being used for both devices
831 (character or block) as well as other special files (such as fifos and
832 named sockets). This has changed to separate non-device special files
833 under the 'S' designation (e.g. "cS+++++++ path/fifo"). See also the
834 "--specials" option, below.
836 - The way rsync escapes unreadable characters has changed. First, rsync
837 now has support for recognizing valid multibyte character sequences in
838 your current locale, allowing it to escape fewer characters than before
839 for a locale such as UTF-8. Second, it now uses an escape idiom of
840 "\#123", which is the literal string "\#" followed by exactly 3 octal
841 digits. Rsync no longer doubles a backslash character in a filename
842 (e.g. it used to output "foo\\bar" when copying "foo\bar") -- now it only
843 escapes a backslash that is followed by a hash-sign and 3 digits (0-9)
844 (e.g. it will output "foo\#134#789" when copying "foo\#789"). See also
845 the --8-bit-output (-8) option, mentioned below.
847 Script writers: the local rsync is the one that outputs escaped names,
848 so if you need to support unescaping of filenames for older rsyncs, I'd
849 suggest that you parse the output of "rsync --version" and only use the
850 old unescaping rules for 2.6.5 and 2.6.6.
854 - Fixed a really old bug that caused --checksum (-c) to checksum all the
855 files encountered during the delete scan (ouch).
857 - Fixed a potential hang in a remote generator: when the receiver gets a
858 read-error on the socket, it now signals the generator about this so that
859 the generator does not try to send any of the terminating error messages
860 to the client (avoiding a potential hang in some setups).
862 - Made hard-links work with symlinks and devices again.
864 - If the sender gets an early EOF reading a source file, we propagate this
865 error to the receiver so that it can discard the file and try requesting
866 it again (which is the existing behavior for other kinds of read errors).
868 - If a device-file/special-file changes permissions, rsync now updates the
869 permissions without recreating the file.
871 - If the user specifies a remote-host for both the source and destination,
872 we now output a syntax error rather than trying to open the destination
873 hostspec as a filename.
875 - When --inplace creates a new destination file, rsync now creates it with
876 permissions 0600 instead of 0000 -- this makes restarting possible when
877 the transfer gets interrupted in the middle of sending a new file.
879 - Reject the combination of --inplace and --sparse since the sparse-output
880 algorithm doesn't work when overwriting existing data.
882 - Fixed the directory name in the error that is output when pop_dir()
885 - Really fixed the parsing of a "!" entry in .cvsignore files this time.
887 - If the generator gets a stat() error on a file, output it (this used to
888 require at least -vv for the error to be seen).
890 - If waitpid() fails or the child rsync didn't exit cleanly, we now handle
891 the exit status properly and generate a better error.
893 - Fixed some glitches in the double-verbose output when using --copy-dest,
894 --link-dest, or --compare-dest. Also improved how the verbose output
895 handles hard-links (within the transfer) that had an up-to-date alternate
896 "dest" file, and copied files (via --copy-dest).
898 - Fixed the matching of the dont-compress items (e.g. *.gz) against files
899 that have a path component containing a slash.
901 - If the code reading a filter/exclude file gets an EINTR error, rsync now
902 clears the error flag on the file handle so it can keep on reading.
904 - If --relative is active, the sending side cleans up trailing "/" or "/."
905 suffixes to avoid triggering a bug in older rsync versions. Also, we now
906 reject a ".." dir if it would be sent as a relative dir.
908 - If a non-directory is in the way of a directory and rsync is run with
909 --dry-run and --delete, rsync no longer complains about not being able
910 to opendir() the not-yet present directory.
912 - When --list-only is used and a non-existent local destination dir was
913 also specified as a destination, rsync no longer generates a warning
914 about being unable to create the missing directory.
916 - Fixed some problems with --relative --no-implied-dirs when the
917 destination directory did not yet exist: we can now create a symlink or
918 device when it is the first thing in the missing dir, and --fuzzy no
919 longer complains about being unable to open the missing dir.
921 - Fixed a bug where the --copy-links option would not affect implied
922 directories without --copy-unsafe-links (see --relative).
924 - Got rid of the need for --force to be used in some circumstances with
925 --delete-after (making it consistent with --delete-before/-during).
927 - Rsync now ignores the SIGXFSZ signal, just in case your OS sends this
928 when a file is too large (rsync handles the write error).
930 - Fixed a bug in the Proxy-Authorization header's base64-encoded value: it
931 was not properly padded with trailing '=' chars. This only affects a
932 user that need to use a password-authenticated proxy for an outgoing
933 daemon-rsync connection.
935 - If we're transferring an empty directory to a new name, rsync no longer
936 forces S_IWUSR if it wasn't already set, nor does it accidentally leave
939 - Fixed a bug in the debug output (-vvvvv) that could mention the wrong
940 checksum for the current file offset.
942 - Rsync no longer allows a single directory to be copied over a non-
943 directory destination arg.
947 - Added the --append option that makes rsync append data onto files that
948 are longer on the source than the destination (this includes new files).
950 - Added the --min-size=SIZE option to exclude small files from the
953 - Added the --compress-level option to allow you to set how aggressive
954 rsync's compression should be (this option implies --compress).
956 - Enhanced the parsing of the SIZE value for --min-size and --max-size to
957 allow easy entry of multiples of 1000 (instead of just multiples of 1024)
958 and off-by-one values too (e.g. --max-size=8mb-1).
960 - Added the --8-bit-output (-8) option, which tells rsync to avoid escaping
961 high-bit characters that it thinks are unreadable in the current locale.
963 - The new option --human-readable (-h) changes the output of --progress,
964 --stats, and the end-of-run summary to be easier to read. If repeated,
965 the units become powers of 1024 instead of powers of 1000. (The old
966 meaning of -h, as a shorthand for --help, still works as long as you
967 just use it on its own, as in "rsync -h".)
969 - If lutimes() and/or lchmod() are around, use them to allow the
970 preservation of attributes on symlinks.
972 - The --link-dest option now affects symlinks and devices (when possible).
974 - Added two config items to the rsyncd.conf parsing: "pre-xfer exec" and
975 "post-xfer exec". These allow a command to be specified on a per-module
976 basis that will be run before and/or after a daemon-mode transfer. (See
977 the man page for a list of the environment variables that are set with
978 information about the transfer.)
980 - When using the --relative option, you can now insert a dot dir in
981 the source path to indicate where the replication of the source dirs
982 should start. For example, if you specify a source path of
983 rsync://host/module/foo/bar/./baz/dir with -R, rsync will now only
984 replicate the "baz/dir" part of the source path (note: a trailing
985 dot dir is unaffected unless it also has a trailing slash).
987 - Added some new --no-FOO options that make it easier to override unwanted
988 implied or default options. For example, "-a --no-o" (aka "--archive
989 --no-owner") can be used to turn off the preservation of file ownership
990 that is implied by -a.
992 - Added the --chmod=MODE option that allows the destination permissions to
993 be changed from the source permissions. E.g. --chmod=g+w,o-rwx
995 - Added the "incoming chmod" and "outgoing chmod" daemon options that allow
996 a module to specify what permissions changes should be applied to all
997 files copied to and from the daemon.
999 - Allow the --temp-dir option to be specified when starting a daemon, which
1000 sets the default temporary directory for incoming files.
1002 - If --delete is combined with --dirs without --recursive, rsync will now
1003 delete in any directory whose content is being synchronized.
1005 - If --backup is combined with --delete without --backup-dir (and without
1006 --delete-excluded), we add a "protect" filter-rule to ensure that files
1007 with the backup suffix are not deleted.
1009 - The file-count stats that are output by --progress were improved to
1010 better indicate what the numbers mean. For instance, the output:
1011 "(xfer#5, to-check=8383/9999)" indicates that this was the fifth file
1012 to be transferred, and we still need to check 8383 more files out of
1015 - The include/exclude code now allows a dir/*** directive (with 3 trailing
1016 stars) to match both the dir itself as well as all the content below the
1017 dir (dir/** would not match the dir).
1019 - Added the --prune-empty-dirs (-m) option that makes the receiving rsync
1020 discard empty chains of directories from the file-list. This makes it
1021 easier to selectively copy files from a source hierarchy and end up with
1022 just the directories needed to hold the resulting files.
1024 - If the --itemize-changes (-i) option is repeated, rsync now includes
1025 unchanged files in the itemized output (similar to -vv, but without all
1026 the other verbose messages that can get in the way). Of course, the
1027 client must be version 2.6.7 for this to work, but the remote rsync only
1028 needs to be 2.6.7 if you're pushing files.
1030 - Added the --specials option to tell rsync to copy non-device special
1031 files (which rsync now attempts even as a normal user). The --devices
1032 option now requests the copying of just devices (character and block).
1033 The -D option still requests both (e.g. --devices and --specials), -a
1034 still implies -D, and non-root users still get a silent downgrade that
1035 omits device copying.
1037 - Added the --super option to make the receiver always attempt super-user
1038 activities. This is useful for systems that allow things such as devices
1039 to be created or ownership to be set without being UID 0, and is also
1040 useful for someone who wants to ensure that errors will be output if the
1041 receiving rsync isn't being run as root.
1043 - Added the --sockopts option for those few who want to customize the TCP
1044 options used to contact a daemon rsync.
1046 - Added a way for the --temp-dir option to be combined with a partial-dir
1047 setting that lets rsync avoid non-atomic updates (for those times when
1048 --temp-dir is not being used because space is tight).
1050 - A new support script, files-to-excludes, will transform a list of files
1051 into a set of include/exclude directives that will copy those files.
1053 - A new option, --executability (-E) can be used to preserve just the
1054 execute bit on files, for those times when using the --perms option is
1057 - The daemon now logs each connection and also each module-list request
1060 - New log-format options: %M (modtime), %U (uid), %G (gid), and %B
1061 (permission bits, e.g. "rwxr-xrwt").
1063 - The --dry-run option no longer forces the enabling of --verbose.
1065 - The --remove-sent-files option now does a better job of incrementally
1066 removing the sent files on the sending side (older versions tended to
1067 clump up all the removals at the end).
1069 - A daemon now supersedes its minimal SIGCHLD handler with the standard
1070 PID-remembering version after forking. This ensures that the generator
1071 can get the child-exit status from the receiver.
1073 - Use of the --bwlimit option no longer interferes with the remote rsync
1074 sending error messages about invalid/refused options.
1076 - Rsync no longer returns a usage error when used with one local source arg
1077 and no destination: this now implies the --list-only option, just like
1078 the comparable situation with a remote source arg.
1080 - Added the --copy-dirlinks option, a more limited version of --copy-links.
1082 - Various documentation improvements, including: a better synopsis, some
1083 improved examples, a better discussion of the presence and absence of
1084 --perms (including how it interacts with the new --executability and
1085 --chmod options), an extended discussion of --temp-dir, an improved
1086 discussion of --partial-dir, a better description of rsync's pattern
1087 matching characters, an improved --no-implied-dirs section, and the
1088 documenting of what the --stats option outputs.
1090 - Various new and updated diffs in the patches dir, including: acls.diff,
1091 xattrs.diff, atimes.diff, detect-renamed.diff, and slp.diff.
1095 - We now use sigaction() and sigprocmask() if possible, and fall back on
1096 signal() if not. Using sigprocmask() ensures that rsync enables all the
1097 signals that it needs, just in case it was started in a masked state.
1099 - Some buffer sizes were expanded a bit, particularly on systems where
1100 MAXPATHLEN is overly small (e.g. cygwin).
1102 - If io_printf() tries to format more data than fits in the buffer, exit
1103 with an error instead of transmitting a truncated buffer.
1105 - If a va_copy macro is defined, lib/snprintf.c will use it when defining
1108 - Reduced the amount of stack memory needed for each level of directory
1109 recursion by nearly MAXPATHLEN bytes.
1111 - The wildmatch function was extended to allow an array of strings to be
1112 supplied as the string to match. This allows the exclude code to do less
1115 - Got rid of the safe_fname() function (and all the myriad calls) and
1116 replaced it with a new function in the log.c code that filters all the
1117 output going to the terminal.
1119 - Unified the f_name() and the f_name_to() functions.
1121 - Improved the hash-table code the sender uses to handle checksums to make
1122 it use slightly less memory and run just a little faster.
1126 - The diffs in the patches dir now require "patch -p1 <DIFF" instead of
1127 the previous -p0. Also, the version included in the release tar now
1128 affect generated files (e.g. configure, rsync.1, proto.h, etc.), so
1129 it is no longer necessary to run autoconf and/or yodl unless you're
1130 applying a patch that was checked out from CVS.
1132 - Several diffs in the patches dir now use the proper --enable-FOO
1133 configure option instead of --with-FOO to turn on the inclusion of
1134 the newly patched feature.
1136 - There is a new script, "prepare-source" than can be used to update the
1137 various generated files (proto.h, configure, etc.) even before configure
1138 has created the Makefile (this is mainly useful when patching the source
1139 with a patch that doesn't affect generated files).
1141 - The testsuite now sets HOME so that it won't be affected by a file such
1145 NEWS for rsync 2.6.6 (28 Jul 2005)
1146 Protocol: 29 (unchanged)
1147 Changes since 2.6.5:
1151 - The zlib code was upgraded to version 1.2.3 in order to make it more
1152 secure. While the widely-publicized security problem in zlib 1.2.2 did
1153 not affect rsync, another security problem surfaced that affects rsync's
1158 - The setting of flist->high in clean_flist() was wrong for an empty list.
1159 This could cause flist_find() to crash in certain rare circumstances
1160 (e.g. if just the right directory setup was around when --fuzzy was
1161 combined with --link-dest).
1163 - The outputting of hard-linked files when verbosity was > 1 was not right:
1164 (1) Without -i it would output the name of each hard-linked file as
1165 though it had been changed; it now outputs a "is hard linked" message for
1166 the file. (2) With -i it would output all dots for the unchanged
1167 attributes of a hard-link; it now changes those dots to spaces, as is
1168 done for other totally unchanged items.
1170 - When backing up a changed symlink or device, get rid of any old backup
1171 item so that we don't get an "already exists" error.
1173 - A couple places that were comparing a local and a remote modification-
1174 time were not honoring the --modify-window option.
1176 - Fixed a bug where the 'p' (permissions) itemized-changes flag might get
1177 set too often (if some non-significant mode bits differed).
1179 - Fixed a really old, minor bug that could cause rsync to warn about being
1180 unable to mkdir() a path that ends in "/." because it just created the
1181 directory (required --relative, --no-implied-dirs, a source path that
1182 ended in either a trailing slash or a trailing "/.", and a non-existing
1183 destination dir to tickle the bug in a recent version).
1187 - Made the "max verbosity" setting in the rsyncd.conf file settable on a
1188 per-module basis (which now matches the documentation).
1190 - The support/rrsync script has been upgraded to verify the args of options
1191 that take args (instead of rejecting any such options). The script was
1192 also changed to try to be more secure and to fix a problem in the parsing
1193 of a pull operation that has multiple sources.
1195 - Improved the documentation that explains the difference between a
1196 normal daemon transfer and a daemon-over remote-shell transfer.
1198 - Some of the diffs supplied in the patches dir were fixed and/or
1203 - Made configure define NOBODY_USER (currently hard-wired to "nobody") and
1204 NOBODY_GROUP (set to either "nobody" or "nogroup" depending on what we
1205 find in the /etc/group file).
1207 - Added a test to the test suite, itemized.test, that tests the output of
1208 -i (log-format w/%i) and some double-verbose messages.
1211 NEWS for rsync 2.6.5 (1 Jun 2005)
1212 Protocol: 29 (unchanged)
1213 Changes since 2.6.4:
1217 - Non-printable chars in filenames are now output using backslash-
1218 escaped characters rather than '?'s. Any non-printable character is
1219 output using 3 digits of octal (e.g. "\n" -> "\012"), and a backslash
1220 is now output as "\\". Rsync also uses your locale setting, which
1221 can make it treat fewer high-bit characters as non-printable.
1223 - If rsync received an empty file-list when pulling files, it would
1224 output a "nothing to do" message and exit with a 0 (success) exit
1225 status, even if the remote rsync returned an error (it did not do
1226 this under the same conditions when pushing files). This was changed
1227 to make the pulling behavior the same as the pushing behavior: we
1228 now do the normal end-of-run outputting (depending on options) and
1229 exit with the appropriate exit status.
1233 - A crash bug was fixed when a daemon had its "path" set to "/", did
1234 not have chroot enabled, and used some anchored excludes in the
1237 - Fixed a bug in the transfer of a single file when -H is specified
1238 (rsync would either infinite loop or perhaps crash).
1240 - Fixed a case where the generator might try (and fail) to tweak the
1241 write-permissions of a read-only directory in list-only mode (this
1242 only caused an annoying warning message).
1244 - If --compare-dest or --link-dest uses a locally-copied file as the
1245 basis for an updated version, log this better when --verbose or -i
1248 - Fixed the accidental disabling of --backup during the --delete-after
1251 - Restored the ability to use the --address option in client mode (in
1252 addition to its use in daemon mode).
1254 - Make sure that some temporary progress information from the delete
1255 processing does not get left on the screen when it is followed by a
1258 - When --existing skips a directory with extra verbosity, refer to it
1259 as a "directory", not a "file".
1261 - When transferring a single file to a different-named file, any
1262 generator messages that are source-file related no longer refer to
1263 the file by the destination filename.
1265 - Fixed a bug where hard-linking a group of files might fail if the
1266 generator hasn't created a needed destination directory yet.
1268 - Fixed a bug where a hard-linked group of files that is newly-linked
1269 to a file in a --link-dest dir doesn't link the files from the rest
1272 - When deleting files with the --one-file-system (-x) option set, rsync
1273 no longer tries to remove files from inside a mount-point on the
1274 receiving side. Also, we don't complain about being unable to remove
1275 the mount-point dir.
1277 - Fixed a compatibility problem when using --cvs-ignore (-C) and
1278 sending files to an older rsync without using --delete.
1280 - Make sure that a "- !" or "+ !" include/exclude pattern does not
1281 trigger the list-clearing action that is reserved for "!".
1283 - Avoid a timeout in the generator when the sender/receiver aren't
1284 handling the generator's checksum output quickly enough.
1286 - Fixed the omission of some directories in the delete processing when
1287 --relative (-R) was combined with a source path that had a trailing
1290 - Fixed a case where rsync would erroneously delete some files and then
1291 re-transfer them when the options --relative (-R) and --recursive
1292 (-r) were both enabled (along with --delete) and a source path had a
1295 - Make sure that --max-size doesn't affect a device or a symlink.
1297 - Make sure that a system with a really small MAXPATHLEN does not cause
1298 the buffers in readfd_unbuffered() to be too small to receive normal
1299 messages. (This mainly affected Cygwin.)
1301 - If a source pathname ends with a filename of "..", treat it as if
1302 "../" had been specified (so that we don't copy files to the parent
1303 dir of the destination).
1305 - If --delete is combined with a file-listing rsync command (i.e. no
1306 transfer is happening), avoid outputting a warning that we couldn't
1309 - If --stats is specified with --delete-after, ensure that all the
1310 "deleting" messages are output before the statistics.
1312 - Improved one "if" in the deletion code that was only checking errno
1313 for ENOTEMPTY when it should have also been checking for EEXIST (for
1314 compatibility with OS variations).
1318 - Added the --only-write-batch=FILE option that may be used (instead
1319 of --write-batch=FILE) to create a batch file without doing any
1320 actual updating of the destination. This allows you to divert all
1321 the file-updating data away from a slow data link (as long as you
1322 are pushing the data to the remote server when creating the batch).
1324 - When the generator is taking a long time to fill up its output buffer
1325 (e.g. if the transferred files are few, small, or missing), it now
1326 periodically flushes the output buffer so that the sender/receiver
1327 can get started on the files sooner rather than later.
1329 - Improved the keep-alive code to handle a long silence between the
1330 sender and the receiver that can occur when the sender is receiving
1331 the checksum data for a large file.
1333 - Improved the auth-errors that are logged by the daemon to include
1334 some information on why the authorization failed: wrong user,
1335 password mismatch, etc. (The client-visible message is unchanged!)
1337 - Improved the client's handling of an "@ERROR" from a daemon so that
1338 it does not complain about an unexpectedly closed socket (since we
1339 really did expect the socket to close).
1341 - If the daemon can't open the log-file specified in rsyncd.conf, fall
1342 back to using syslog and log an appropriate warning. This is better
1343 than what was typically a totally silent (and fatal) failure (since a
1344 daemon is not usually run with the --no-detach option that was
1345 necessary to see the error on stderr).
1347 - The man pages now consistently refer to an rsync daemon as a "daemon"
1348 instead of a "server" (to distinguish it from the server process in a
1349 non-daemon transfer).
1351 - Made a small change to the rrsync script (restricted rsync -- in the
1352 support dir) to make a read-only server reject all --remove-* options
1353 when sending files (to future-proof it against the possibility of
1354 other similar options being added at some point).
1358 - Rsync now calls setlocale(LC_CTYPE, ""). This enables isprint() to
1359 better discern which filename characters need to be escaped in
1360 messages (which should result in fewer escaped characters in some
1363 - Improved the naming of the log-file open/reopen/close functions.
1365 - Removed some protocol-compatibility code that was only needed to help
1366 someone running a pre-release of 2.6.4.
1370 - Added configure option "--disable-locale" to disable any use of
1371 setlocale() in the binary.
1373 - Fixed a bug in the SUPPORT{,_HARD}_LINKS #defines which prevented
1374 rsync from being built without symlink or hard-link support.
1376 - Only #define HAVE_REMSH if it is going to be set to 1.
1378 - Configure now disables the use of mkstemp() under HP-UX (since they
1379 refuse to fix its broken handling of large files).
1381 - Configure now explicitly checks for the lseek64() function so that
1382 the code can use HAVE_LSEEK64 instead of inferring lseek64()'s
1383 presence based on the presence of the off64_t type.
1385 - Configure no longer mentions the change in the default remote-shell
1386 (from rsh to ssh) that occurred for the 2.6.0 release.
1388 - Some minor enhancements to the test scripts.
1390 - Added a few new *.diff files to the patches dir, including a patch
1391 that enables the optional copying of extended attributes.
1394 NEWS for rsync 2.6.4 (30 March 2005)
1395 Protocol: 29 (changed)
1396 Changes since 2.6.3:
1400 - When rsync deletes a directory and outputs a verbose message about
1401 it, it now appends a trailing slash to the name instead of (only
1402 sometimes) outputting a preceding "directory " string.
1404 - The --stats output will contain file-list time-statistics if both
1405 sides are 2.6.4, or if the local side is 2.6.4 and the files are
1406 being pushed (since the stats come from the sending side).
1407 (Requires protocol 29 for a pull.)
1409 - The "%o" (operation) log-format escape now has a third value (besides
1410 "send" and "recv"): "del." (with trailing dot to make it 4 chars).
1411 This changes the way deletions are logged in the daemon's log file.
1413 - When the --log-format option is combined with --verbose, rsync now
1414 avoids outputting the name of the file twice in most circumstances.
1415 As long as the --log-format item does not refer to any post-transfer
1416 items (such as %b or %c), the --log-format message is output prior to
1417 the transfer, so --verbose is now the equivalent of a --log-format of
1418 '%n%L' (which outputs the name and any link info). If the log output
1419 must occur after the transfer to be complete, the only time the name
1420 is also output prior to the transfer is when --progress was specified
1421 (so that the name will precede the progress stats, and the full
1422 --log-format output will come after).
1424 - Non-printable characters in filenames are replaced with a '?' to
1425 avoid corrupting the screen or generating empty lines in the output.
1429 - Restore the list-clearing behavior of "!" in a .cvsignore file (2.6.3
1430 was only treating it as a special token in an rsync include/exclude
1433 - The combination of --verbose and --dry-run now mentions the full list
1434 of changes that would be output without --dry-run.
1436 - Avoid a mkdir warning when removing a directory in the destination
1437 that already exists in the --backup-dir.
1439 - An OS that has a binary mode for its files (such as cygwin) needed
1440 setmode(fd, O_BINARY) called on the temp-file we opened with
1441 mkstemp(). (Fix derived from cygwin's 2.6.3 rsync package.)
1443 - Fixed a potential hang when verbosity is high, the client side is
1444 the sender, and the file-list is large.
1446 - Fixed a potential protocol-corrupting bug where the generator could
1447 merge a message from the receiver into the middle of a multiplexed
1448 packet of data if only part of that data had been written out to the
1449 socket when the message from the generator arrived.
1451 - We now check if the OS doesn't support using mknod() for creating
1452 FIFOs and sockets, and compile-in some compatibility code using
1453 mkfifo() and socket() when necessary.
1455 - Fixed an off-by-one error in the handling of --max-delete=N. Also,
1456 if the --max-delete limit is exceeded during a run, we now output a
1457 warning about this at the end of the run and exit with a new error
1460 - One place in the code wasn't checking if fork() failed.
1462 - The "ignore nonreadable" daemon parameter used to erroneously affect
1463 readable symlinks that pointed to a non-existent file.
1465 - If the OS does not have lchown() and a chown() of a symlink will
1466 affect the referent of a symlink (as it should), we no longer try
1467 to set the user and group of a symlink.
1469 - The generator now properly runs the hard-link loop and the dir-time
1470 rewriting loop after we're sure that the redo phase is complete.
1472 - When --backup was specified with --partial-dir=DIR, where DIR is a
1473 relative path, the backup code was erroneously trying to backup a
1474 file that was put into the partial-dir.
1476 - If a file gets resent in a single transfer and the --backup option is
1477 enabled along with --inplace, rsync no longer performs a duplicate
1478 backup (it used to overwrite the first backup with the failed file).
1480 - One call to flush_write_file() was not being checked for an error.
1482 - The --no-relative option was not being sent from the client to a
1485 - If an rsync daemon specified "dont compress = ..." for a file and the
1486 client tried to specify --compress, the libz code was not handling a
1487 compression level of 0 properly. This could cause a transfer failure
1488 if the block-size for a file was large enough (e.g. rsync might have
1489 exited with an error for large files).
1491 - Fixed a bug that would sometimes surface when using --compress and
1492 sending a file with a block-size larger than 64K (either manually
1493 specified, or computed due to the file being really large). Prior
1494 versions of rsync would sometimes fail to decompress the data
1495 properly, and thus the transferred file would fail its verification.
1497 - If a daemon can't open the specified log file (i.e. syslog is not
1498 being used), die without crashing. We also output an error about
1499 the failure on stderr (which will only be seen if --no-detach was
1500 specified) and exit with a new error code (6).
1502 - A local transfer no longer duplicates all its include/exclude options
1503 (since the forked process already has a copy of the exclude list,
1504 there's no need to send them a set of duplicates).
1506 - The output of the items that are being updated by the generator (dirs,
1507 symlinks, devices) is now intermingled in the proper order with the
1508 output from the items that the receiver is updating (regular files)
1509 when pulling. This misordering was particularly bad when --progress
1510 was specified. (Requires protocol 29.)
1512 - When --timeout is specified, lulls that occur in the transfer while
1513 the generator is doing work that does not generate socket traffic
1514 (looking for changed files, deleting files, doing directory-time
1515 touch-ups, etc.) will cause a new keep-alive packet to be sent that
1516 should keep the transfer going as long as the generator continues to
1517 make progress. (Requires protocol 29.)
1519 - The stat size of a device is not added to the total file size of the
1520 items in the transfer (the size might be undefined on some OSes).
1522 - Fixed a problem with refused-option messages sometimes not making it
1523 back to the client side when a remote --files-from was in effect and
1524 the daemon was the receiver.
1526 - The --compare-dest option was not updating a file that differed in
1527 (the preserved) attributes from the version in the compare-dest DIR.
1529 - When rsync is copying files into a write-protected directory, fixed
1530 the change-report output for the directory so that we don't report
1531 an identical directory as changed.
1535 - Rsync now supports popt's option aliases, which means that you can
1536 use /etc/popt and/or ~/.popt to create your own option aliases.
1538 - Added the --delete-during (--del) option which will delete files
1539 from the receiving side incrementally as each directory in the
1540 transfer is being processed. This makes it more efficient than the
1541 default, before-the-transfer behavior, which is now also available as
1542 --delete-before (and is still the default --delete-WHEN option that
1543 will be chosen if --delete or --delete-excluded is specified without
1544 a --delete-WHEN choice). All the --del* options infer --delete, so
1545 an rsync daemon that refuses "delete" will still refuse to allow any
1546 file-deleting options (including the new --remove-sent-files option).
1548 - All the --delete-WHEN options are now more memory efficient:
1549 Previously an duplicate set of file-list objects was created on the
1550 receiving side for the entire destination hierarchy. The new
1551 algorithm only creates one directory of objects at a time (for files
1552 inside the transfer).
1554 - Added the --copy-dest option, which works like --link-dest except
1555 that it locally copies identical files instead of hard-linking them.
1557 - Added support for specifying multiple --compare-dest, --copy-dest, or
1558 --link-dest options, but only of a single type. (Promoted from the
1559 patches dir and enhanced.) (Requires protocol 29.)
1561 - Added the --max-size option. (Promoted from the patches dir.)
1563 - The daemon-mode options are now separated from the normal rsync
1564 options so that they can't be mixed together. This makes it
1565 impossible to start a daemon that has improper default option values
1566 (which could cause problems when a client connects, such as hanging
1569 - The --bwlimit option may now be used in combination with --daemon
1570 to specify both a default value for the daemon side and a value
1571 that cannot be exceeded by a user-specified --bwlimit option.
1573 - Added the "port" parameter to the rsyncd.conf file. (Promoted from
1574 the patches dir.) Also added "address". The command-line options
1575 take precedence over a config-file option, as expected.
1577 - In _exit_cleanup(): when we are exiting with a partially-received
1578 file, we now flush any data in the write-cache before closing the
1581 - The --inplace support was enhanced to work with --compare-dest,
1582 --link-dest, and (the new) --copy-dest options. (Requires protocol
1585 - Added the --dirs (-d) option for an easier way to copy directories
1586 without recursion. Any directories that are encountered are created
1587 on the destination. Specifying a directory with a trailing slash
1588 copies its immediate contents to the destination.
1590 - The --files-from option now implies --dirs (-d).
1592 - Added the --list-only option, which is mainly a way for the client to
1593 put the server into listing mode without needing to resort to any
1594 internal option kluges (e.g. the age-old use of "-r --exclude="/*/*"
1595 for a non-recursive listing). This option is used automatically
1596 (behind the scenes) when a modern rsync speaks to a modern daemon,
1597 but may also be specified manually if you want to force the use of
1598 the --list-only option over a remote-shell connection.
1600 - Added the --omit-dir-times (-O) option, which will avoid updating
1601 the modified time for directories when --times was specified. This
1602 option will avoid an extra pass through the file-list at the end of
1603 the transfer (to tweak all the directory times), which may provide
1604 an appreciable speedup for a really large transfer. (Promoted from
1607 - Added the --filter (-f) option and its helper option, -F. Filter
1608 rules are an extension to the existing include/exclude handling
1609 that also supports nested filter files as well as per-directory
1610 filter files (like .cvsignore, but with full filter-rule parsing).
1611 This new option was chosen in order to ensure that all existing
1612 include/exclude processing remained 100% compatible with older
1613 versions. Protocol 29 is needed for full filter-rule support, but
1614 backward-compatible rules work with earlier protocol versions.
1615 (Promoted from the patches dir and enhanced.)
1617 - Added the --delay-updates option that puts all updated files into
1618 a temporary directory (by default ".~tmp~", but settable via the
1619 --partial-dir=DIR option) until the end of the transfer. This
1620 makes the updates a little more atomic for a large transfer.
1622 - If rsync is put into the background, any output from --progress is
1625 - Documented the "max verbosity" setting for rsyncd.conf. (This
1626 setting was added a couple releases ago, but left undocumented.)
1628 - The sender and the generator now double-check the file-list index
1629 they are given, and refuse to try to do a file transfer on a
1630 non-file index (since that would indicate that something had gone
1633 - Added the --itemize-changes (-i) option, which is a way to output a
1634 more detailed list of what files changed and in what way. The effect
1635 is the same as specifying a --log-format of "%i %n%L" (see both the
1636 rsync and rsyncd.conf manpages). Works with --dry-run too.
1638 - Added the --fuzzy (-y) option, which attempts to find a basis file
1639 for a file that is being created from scratch. The current algorithm
1640 only looks in the destination directory for the created file, but it
1641 does attempt to find a match based on size/mod-time (in case the file
1642 was renamed with no other changes) as well as based on a fuzzy
1643 name-matching algorithm. This option requires protocol 29 because it
1644 needs the new file-sorting order. (Promoted from patches dir and
1645 enhanced.) (Requires protocol 29.)
1647 - Added the --remove-sent-files option, which lets you move files
1650 - The hostname in HOST:PATH or HOST::PATH may now be an IPv6 literal
1651 enclosed in '[' and ']' (e.g. "[::1]"). (We already allowed IPv6
1652 literals in the rsync://HOST:PORT/PATH format.)
1654 - When rsync recurses to build the file list, it no longer keeps open
1655 one or more directory handles from the dir's parent dirs.
1657 - When building under windows, the default for --daemon is now to
1658 avoid detaching, requiring the new --detach option to force rsync
1661 - The --dry-run option can now be combined with either --write-batch or
1662 --read-batch, allowing you to run a do-nothing test command to see
1663 what would happen without --dry-run.
1665 - The daemon's "read only" config item now sets an internal read_only
1666 variable that makes extra sure that no write/delete calls on the
1667 read-only side can succeed.
1669 - The log-format % escapes can now have a numeric field width in
1670 between the % and the escape letter (e.g. "%-40n %08p").
1672 - Improved the option descriptions in the --help text.
1676 - Added atomic-rsync to the support dir: a perl script that will
1677 transfer some files using rsync, and then move the updated files into
1678 place all at once at the end of the transfer. Only works when
1679 pulling, and uses --link-dest and a parallel hierarchy of files to
1682 - Added mnt-excl to the support dir: a perl script that takes the
1683 /proc/mounts file and translates it into a set of excludes that will
1684 exclude all mount points (even mapped mounts to the same disk). The
1685 excludes are made relative to the specified source dir and properly
1688 - Added savetransfer.c to the support dir: a C program that can make
1689 a copy of all the data that flows over the wire. This lets you test
1690 for data corruption (by saving the data on both the sending side and
1691 the receiving side) and provides one way to debug a protocol error.
1693 - Added rrsync to the support dir: this is an updated version of Joe
1694 Smith's restricted rsync perl script. This helps to ensure that only
1695 certain rsync commands can be run by an ssh invocation.
1699 - Added better checking of the checksum-header values that come over
1702 - Merged a variety of file-deleting functions into a single function so
1703 that it is easier to maintain.
1705 - Improved the type of some variables (particularly blocksize vars) for
1706 consistency and proper size.
1708 - Got rid of the uint64 type (which we didn't need).
1710 - Use a slightly more compatible set of core #include directives.
1712 - Defined int32 in a way that ensures that the build dies if we can't
1713 find a variable with at least 32 bits.
1715 PROTOCOL DIFFERENCES FOR VERSION 29:
1717 - A 16-bit flag-word is transmitted after every file-list index. This
1718 indicates what is changing between the sender and the receiver. The
1719 generator now transmits an index and a flag-word to indicate when
1720 dirs and symlinks have changed (instead of producing a message),
1721 which makes the outputting of the information more consistent and
1722 less prone to screen corruption (because the local receiver/sender is
1723 now outputting all the file-change info messages).
1725 - If a file is being hard-linked, the ITEM_XNAME_FOLLOWS bit is enabled
1726 in the flag-word and the name of the file that was linked immediately
1727 follows in vstring format (see below).
1729 - If a file is being transferred with an alternate-basis file, the
1730 ITEM_BASIS_TYPE_FOLLOWS bit is enabled in the flag-word and a single
1731 byte follows, indicating what type of basis file was chosen. If that
1732 indicates that a fuzzy-match was selected, the ITEM_XNAME_FOLLOWS bit
1733 is set in the flag-word and the name of the match in vstring format
1734 follows the basis byte. A vstring is a variable length string that
1735 has its size written prior to the string, and no terminating null.
1736 If the string is from 1-127 bytes, the length is a single byte. If
1737 it is from 128-32767 bytes, the length is written as ((len >> 8) |
1738 0x80) followed by (len % 0x100).
1740 - The sending of exclude names is done using filter-rule syntax. This
1741 means that all names have a prefixed rule indicator, even excludes
1742 (which used to be sent as a bare pattern, when possible). The -C
1743 option will include the per-dir .cvsignore merge file in the list of
1744 filter rules so it is positioned correctly (unlike in some older
1745 transfer scenarios).
1747 - Rsync sorts the filename list in a different way: it sorts the subdir
1748 names after the non-subdir names for each dir's contents, and it
1749 always puts a dir's contents immediately after the dir's name in the
1750 list. (Previously an item named "foo.txt" would sort in between
1751 directory "foo/" and "foo/bar".)
1753 - When talking to a protocol 29 rsync daemon, a list-only request
1754 is able to note this before the options are sent over the wire and
1755 the new --list-only option is included in the options.
1757 - When the --stats bytes are sent over the wire (or stored in a batch),
1758 they now include two elapsed-time values: one for how long it took to
1759 build the file-list, and one for how long it took to send it over the
1760 wire (each expressed in thousandths of a second).
1762 - When --delete-excluded is specified with some filter rules (AKA
1763 excludes), a client sender will now initiate a send of the rules to
1764 the receiver (older protocols used to omit the sending of excludes in
1765 this situation since there were no receiver-specific rules that
1766 survived --delete-excluded back then). Note that, as with all the
1767 filter-list sending, only items that are significant to the other
1768 side will actually be sent over the wire, so the filter-rule list
1769 that is sent in this scenario is often empty.
1771 - An index equal to the file-list count is sent as a keep-alive packet
1772 from the generator to the sender, which then forwards it on to the
1773 receiver. This normally invalid index is only a valid keep-alive
1774 packet if the 16-bit flag-word that follows it contains a single bit
1775 (ITEM_IS_NEW, which is normally an illegal flag to appear alone).
1777 - A protocol-29 batch file includes a bit for the setting of the --dirs
1778 option and for the setting of the --compress option. Also, the shell
1779 script created by --write-batch will use the --filter option instead
1780 of --exclude-from to capture any filter rules.
1784 - Handle an operating system that use mkdev() in place of makedev().
1786 - Improved configure to better handle cross-compiling.
1789 NEWS for rsync 2.6.3 (30 Sep 2004)
1790 Protocol: 28 (unchanged)
1791 Changes since 2.6.2:
1795 - A bug in the sanitize_path routine (which affects a non-chrooted
1796 rsync daemon) could allow a user to craft a pathname that would get
1797 transformed into an absolute path for certain options (but not for
1798 file-transfer names). If you're running an rsync daemon with chroot
1799 disabled, *please upgrade*, ESPECIALLY if the user privs you run
1800 rsync under is anything above "nobody".
1802 OUTPUT CHANGES (ATTN: those using a script to parse the verbose output):
1804 - Please note that the 2-line footer (output when verbose) now uses the
1805 term "sent" instead of "wrote" and "received" instead of "read". If
1806 you are not parsing the numeric values out of this footer, a script
1807 would be better off using the empty line prior to the footer as the
1808 indicator that the verbose output is over.
1810 - The output from the --stats option was similarly affected to change
1811 "written" to "sent" and "read" to "received".
1813 - Rsync ensures that a filename that contains a newline gets mentioned
1814 with each newline transformed into a question mark (which prevents a
1815 filename from causing an empty line to be output).
1817 - The "backed up ..." message that is output when at least 2 --verbose
1818 options are specified is now the same both with and without the
1819 --backup-dir option.
1823 - Fixed a crash bug that might appear when --delete was used and
1824 multiple source directories were specified.
1826 - Fixed a 32-bit truncation of the file length when generating the
1829 - The --backup code no longer attempts to create some directories
1830 over and over again (generating warnings along the way).
1832 - Fixed a bug in the reading of the secrets file (by the daemon) and
1833 the password file (by the client): the files no longer need to be
1834 terminated by a newline for their content to be read in.
1836 - If a file has a read error on the sending side or the reconstructed
1837 data doesn't match the expected checksum (perhaps due to the basis
1838 file changing during the transfer), the receiver will no longer
1839 retain the resulting file unless the --partial option was specified.
1840 (Note: for the read-error detection to work, neither side can be
1841 older than 2.6.3 -- older receivers will always retain the file, and
1842 older senders don't tell the receiver that the file had a read
1845 - If a file gets resent in a single transfer and the --backup option
1846 is enabled, rsync no longer performs a duplicate backup (it used to
1847 overwrite the original file in the backup area).
1849 - Files specified in the daemon's "exclude" or "exclude from" config
1850 items are now excluded from being uploaded (assuming that the module
1851 allows uploading at all) in addition to the old download exclusion.
1853 - Got rid of a potential hang in the receiver when near the end of a
1856 - When using --backup without a --backup-dir, rsync no longer preserves
1857 the modify time on directories. This avoids confusing NFS.
1859 - When --copy-links (-L) is specified, we now output a separate error
1860 for a symlink that has no referent instead of claiming that a file
1863 - The --copy-links (-L) option no longer has the side-effect of telling
1864 the receiving side to follow symlinks. See the --keep-dirlinks
1865 option (mentioned below) for a way to specify that behavior.
1867 - Error messages from the daemon server's option-parsing (such as
1868 refused options) are now successfully transferred back to the client
1869 (the server used to fail to send the message because the socket
1870 wasn't in the right state for the message to get through).
1872 - Most transfer errors that occur during a daemon transfer are now
1873 returned to the user in addition to being logged (some messages are
1874 intended to be daemon-only and are not affected by this).
1876 - Fixed a bug in the daemon authentication code when using one of the
1877 batch-processing options.
1879 - We try to work around some buggy IPv6 implementations that fail to
1880 implement IPV6_V6ONLY. This should fix the "address in use" error
1881 that some daemons get when running on an OS with a buggy IPv6
1882 implementation. Also, if the new code gets this error, we might
1883 suggest that the user specify --ipv4 or --ipv6 (if we think it will
1886 - When the remote rsync dies, make a better effort to recover any error
1887 messages it may have sent before dying (the local rsync used to just
1888 die with a socket-write error).
1890 - When using --delete and a --backup-dir that contains files that are
1891 hard-linked to their destination equivalents, rsync now makes sure
1892 that removed files really get removed (avoids a really weird rename()
1895 - Avoid a bogus run-time complaint about a lack of 64-bit integers when
1896 the int64 type is defined as an off_t and it actually has 64-bits.
1898 - Added a configure check for open64() without mkstemp64() so that we
1899 can avoid using mkstemp() when such a combination is encountered.
1900 This bypasses a problem writing out large temp files on OSes such as
1903 - Fixed an age-old crash problem with --read-batch on a local copy
1904 (rsync was improperly assuming --whole-file for the local copy).
1906 - When --dry-run (-n) is used and the destination directory does not
1907 exist, rsync now produces a correct report of files that would be
1908 sent instead of dying with a chdir() error.
1910 - Fixed a bug that could cause a slow-to-connect rsync daemon to die
1911 with an error instead of waiting for the connection to finish.
1913 - Fixed an ssh interaction that could cause output to be lost when the
1914 user chose to combine the output of rsync's stdout and stderr (e.g.
1917 - Fixed an option-parsing bug when --files-from got passed to a daemon.
1921 - Added the --partial-dir=DIR option that lets you specify where to
1922 (temporarily) put a partially transferred file (instead of over-
1923 writing the destination file). E.g. --partial-dir=.rsync-partial
1924 Also added support for the RSYNC_PARTIAL_DIR environment variable
1925 that, when found, transforms a regular --partial option (such as
1926 the convenient -P option) into one that also specifies a directory.
1928 - Added --keep-dirlinks (-K), which allows you to symlink a directory
1929 onto another partition on the receiving side and have rsync treat it
1930 as matching a normal directory from the sender.
1932 - Added the --inplace option that tells rsync to write each destination
1933 file without using a temporary file. The matching of existing data
1934 in the destination file can be severely limited by this, but there
1935 are also cases where this is more efficient (such as appending data).
1936 Use only when needed (see the man page for more details).
1938 - Added the "write only" option for the daemon's config file.
1940 - Added long-option names for -4 and -6 (namely --ipv4 and --ipv6)
1941 and documented all these options in the man page.
1943 - Improved the handling of the --bwlimit option so that it's less
1944 bursty, more accurate, and works properly over a larger range of
1947 - The rsync daemon-over-ssh code now looks for SSH_CONNECTION and
1948 SSH2_CLIENT in addition to SSH_CLIENT to figure out the IP address.
1950 - Added the --checksum-seed=N option for advanced users.
1952 - Batch writing/reading has a brand-new implementation that is simpler,
1953 fixes a few weird problems with the old code (such as no longer
1954 sprinkling the batch files into different dirs or even onto different
1955 systems), and is much less intrusive into the code (making it easier
1956 to maintain for the future). The new code generates just one data
1957 file instead of three, which makes it possible to read the batch on
1958 stdin via a remote shell. Also, the old requirement of forcing the
1959 same fixed checksum-seed for all batch processing has been removed.
1961 - If an rsync daemon has a module set with "list = no" (which hides its
1962 presence in the list of available modules), a user that fails to
1963 authenticate gets the same "unknown module" error that they would get
1964 if the module were actually unknown (while still logging the real
1965 error to the daemon's log file). This prevents fishing for module
1968 - The daemon's "refuse options" config item now allows you to match
1969 option names using wildcards and/or the single-letter option names.
1971 - Each transferred file now gets its permissions and modified-time
1972 updated before the temp-file gets moved into place. Previously, the
1973 finished file would have a very brief window where its permissions
1974 disallowed all group and world access.
1976 - Added the ability to parse a literal IPv6 address in an "rsync:" URL
1977 (e.g. rsync://[2001:638:500:101::21]:873/module/dir).
1979 - The daemon's wildcard expanding code can now handle more than 1000
1980 filenames (it's now limited by memory instead of having a hard-wired
1985 - Some cleanup in the exclude code has saved some per-exclude memory
1986 and made the code easier to maintain.
1988 - Improved the argv-overflow checking for a remote command that has a
1991 - Use rsyserr() in the various places that were still calling rprintf()
1992 with strerror() as an arg.
1994 - If an rsync daemon is listening on multiple sockets (to handle both
1995 IPv4 and IPv6 to a single port), we now close all the unneeded file
1996 handles after we accept a connection (we used to close just one of
1999 - Optimized the handling of larger block sizes (rsync used to slow to a
2000 crawl if the block size got too large).
2002 - Optimized away a loop in hash_search().
2004 - Some improvements to the sanitize_path() and clean_fname() functions
2005 makes them more efficient and produce better results (while still
2006 being compatible with the file-name cleaning that gets done on both
2007 sides when sending the file-list).
2009 - Got rid of alloc_sanitize_path() after adding a destination-buffer
2010 arg to sanitize_path() made it possible to put all the former's
2011 functionality into the latter.
2013 - The file-list that is output when at least 4 verbose options are
2014 specified reports the uid value on the sender even when rsync is
2015 not running as root (since we might be sending to a root receiver).
2019 - Added a "gen" target to rebuild most of the generated files,
2020 including configure, config.h.in, the man pages, and proto.h.
2022 - If "make proto" doesn't find some changes in the prototypes, the
2023 proto.h file is left untouched (its time-stamp used to always be
2026 - The variable $STRIP (that is optionally set by the install-strip
2027 target's rule) was changed to $INSTALL_STRIP because some systems
2028 have $STRIP already set in the environment.
2030 - Fixed a build problem when SUPPORT_HARD_LINKS isn't defined.
2032 - When cross-compiling, the gettimeofday() function is now assumed to
2033 be a modern version that takes two-args (since we can't test it).
2037 - The scripts in the testsuite dir were cleaned up a bit and a few
2040 - Some new diffs were added to the patches dir, and some accepted
2044 NEWS for rsync 2.6.2 (30 Apr 2004)
2045 Protocol: 28 (unchanged)
2046 Changes since 2.6.1:
2050 - Fixed a major bug in the sorting of the filenames when --relative
2051 is used for some sources (just sources such as "/" and "/*" were
2052 affected). This fix ensures that we ask for the right file-list
2053 item when requesting changes from the sender.
2055 - Rsync now checks the return value of the close() function to
2056 better report disk-full problems on an NFS file system.
2058 - Restored the old daemon-server behavior of logging error messages
2059 rather than returning them to the user. (A better long-term fix
2060 will be sought in the future.)
2062 - An obscure uninitialized-variable bug was fixed in the uid/gid
2063 code. (This bug probably had no ill effects.)
2067 - Got rid of the configure check for sys/sysctl.h (it wasn't used
2068 and was causing a problem on some systems). Also improved the
2069 broken-largefile-locking test to try to avoid failure due to an
2072 - Fixed a compile problem on systems that don't define
2075 - Fixed a compile problem in the popt source for compilers that
2076 don't support __attribute__.
2080 - Improved the testsuite's "merge" test to work on OSF1.
2082 - Two new diffs were added to the patches dir.
2085 NEWS for rsync 2.6.1 (26 Apr 2004)
2086 Protocol: 28 (changed)
2087 Changes since 2.6.0:
2091 - Paths sent to an rsync daemon are more thoroughly sanitized when
2092 chroot is not used. If you're running a non-read-only rsync
2093 daemon with chroot disabled, *please upgrade*, ESPECIALLY if the
2094 user privs you run rsync under is anything above "nobody".
2098 - Lower memory use, more optimal transfer of data over the socket,
2099 and lower CPU usage (see the INTERNAL section for details).
2101 - The RSYNC_PROXY environment variable can now contain a
2102 "USER:PASS@" prefix before the "HOST:PORT" information.
2105 - The --progress output now mentions how far along in the transfer
2106 we are, including both a count of files transferred and a
2107 percentage of the total file-count that we've processed. It also
2108 shows better current-rate-of-transfer and remaining-transfer-time
2111 - Documentation changes now attempt to describe some often mis-
2112 understood features more clearly.
2116 - When -x (--one-file-system) is combined with -L (--copy-links) or
2117 --copy-unsafe-links, no symlinked files are skipped, even if the
2118 referent file is on a different filesystem.
2120 - The --link-dest code now works properly for a non-root user when
2121 (1) the UIDs of the source and destination differ and -o was
2122 specified, or (2) when the group of the source can't be used on
2123 the destination and -g was specified.
2125 - Fixed a bug in the handling of -H (hard-links) that might cause
2126 the expanded PATH/NAME value of the current item to get
2127 overwritten (due to an expanded-name caching bug).
2129 - We now reset the "new data has been sent" flag at the start of
2130 each file we send. This makes sure that an interrupted transfer
2131 with the --partial option set doesn't keep a shorter temp file
2132 than the current basis file when no new data has been transferred
2133 over the wire for that file.
2135 - Fixed a byte-order problem in --batch-mode on big-endian machines.
2138 - When using --cvs-exclude, the exclude items we get from a
2139 per-directory's .cvsignore file once again only affect that one
2140 directory (not all following directories too). The items are also
2141 now properly word-split and parsed without any +/- prefix parsing.
2143 - When specifying the USER@HOST: prefix for a file, the USER part
2144 can now contain an '@', if needed (i.e. the last '@' is used to
2145 find the HOST, not the first).
2147 - Fixed some bugs in the handling of group IDs for non-root users:
2148 (1) It properly handles a group that the sender didn't have a name
2149 for (it would previously skip changing the group on any files in
2150 that group). (2) If --numeric-ids is used, rsync no longer
2151 attempts to set groups that the user doesn't have the permission
2154 - Fixed the "refuse options" setting in the rsyncd.conf file.
2156 - Improved the -x (--one-file-system) flag's handling of any mount-
2157 point directories we encounter. It is both more optimal (in that
2158 it no longer does a useless scan of the contents of the mount-
2159 point dirs) and also fixes a bug where a remapped mount of the
2160 original filesystem could get discovered in a subdir we should be
2163 - Rsync no longer discards a double-slash at the start of a filename
2164 when trying to open the file. It also no longer constructs names
2165 that start with a double slash (unless the user supplied them).
2167 - Path-specifying options to a daemon should now work the same with
2168 or without chroot turned on. Previously, such a option (such as
2169 --link-dest) would get its absolute path munged into a relative
2170 one if chroot was not on, making that setting fairly useless.
2171 Rsync now transforms the path into one that is based on the
2172 module's base dir when chroot is not enabled.
2174 - Fixed a compatibility problem interacting with older rsync
2175 versions that might send us an empty --suffix value without
2176 telling us that --backup-dir was specified.
2178 - The "hosts allow" option for a daemon-over-remote-shell process
2179 now has improved support for IPv6 addresses and a fix for systems
2180 that have a length field in their socket structs.
2182 - Fixed the ability to request an empty backup --suffix when sending
2183 files to an rsync daemon.
2185 - Fixed an option-parsing bug when --files-from was sent to a server
2190 - Most of the I/O is now buffered, which results in a pretty large
2191 speedup when running under MS Windows. (Craig Barratt)
2193 - Optimizations to the name-handling/comparing code have made some
2194 significant reductions in user-CPU time for large file sets.
2196 - Some cleanup of the variable types make the code more consistent.
2198 - Reduced memory requirements of hard link preservation.
2201 - Implemented a new algorithm for hard-link handling that speeds up
2202 the code significantly. (J.W. Schultz and Wayne Davison)
2204 - The --hard-link option now uses the first existing file in the
2205 group of linked files as the basis for the transfer. This
2206 prevents the sub-optimal transfer of a file's data when a new
2207 hardlink is added on the sending side and it sorts alphabetically
2208 earlier in the list than the files that are already present on the
2211 - Dropped support for protocol versions less than 20 (2.3.0 released
2212 15 Mar 1999) and activated warnings for protocols less than 25
2213 (2.5.0 released 23 Aug 2001). (Wayne Davison and J.W. Schultz,
2216 - More optimal data transmission for --hard-links (protocol 28).
2218 - More optimal data transmission for --checksum (protocol 28).
2220 - Less memory is used when --checksum is specified.
2222 - Less memory is used in the file list (a per-file savings).
2224 - The generator is now better about not modifying the file list
2225 during the transfer in order to avoid a copy-on-write memory
2226 bifurcation (on systems where fork() uses shared memory).
2227 Previously, rsync's shared memory would slowly become unshared,
2228 resulting in real memory usage nearly doubling on the receiving
2229 side by the end of the transfer. Now, as long as permissions
2230 are being preserved, the shared memory should remain that way
2231 for the entire transfer.
2233 - Changed hardlink info and file_struct + strings to use allocation
2234 pools. This reduces memory use for large file-sets and permits
2235 freeing memory to the OS. (J.W. Schultz)
2237 - The 2 pipes used between the receiver and generator processes
2238 (which are forked on the same machine) were reduced to 1 pipe and
2239 the protocol improved so that (1) it is now impossible to have the
2240 "redo" pipe fill up and hang rsync, and (2) trailing messages from
2241 the receiver don't get lost on their way through the generator
2242 over to the sender (which mainly affected hard-link messages and
2243 verbose --stats output).
2245 - Improved the internal uid/gid code to be more portable and a
2246 little more optimized.
2248 - The device numbers sent when using --devices are now sent as
2249 separate major/minor values with 32-bit accuracy (protocol 28).
2250 Previously, the copied devices were sent as a single 32-bit
2251 number. This will make inter-operation of 64-bit binaries more
2252 compatible with their 32-bit brethren (with both ends of the
2253 connection are using protocol 28). Note that optimizations in the
2254 binary protocol for sending the device numbers often results in
2255 fewer bytes being used than before, even though more precision is
2258 - Some cleanup of the exclude/include structures and its code made
2259 things clearer (internally), simpler, and more efficient.
2261 - The reading & writing of the file-list in batch-mode is now
2262 handled by the same code that sends & receives the list over the
2263 wire. This makes it much easier to maintain. (Note that the
2264 batch code is still considered to be experimental.)
2268 - The configure script now accepts --with-rsyncd-conf=PATH to
2269 override the default value of the /etc/rsyncd.conf file.
2271 - Fixed configure bug when running "./configure --disable-ipv6".
2273 - Fixed compilation problem on Tru64 Unix (having to do with
2274 sockaddr.sa_len and sockaddr.sin_len).
2278 - Fixed "make test" bug when build dir is not the source dir.
2280 - Added a couple extra diffs in the "patches" dir, removed the ones
2281 that got applied, and rebuilt the rest.
2284 NEWS for rsync 2.6.0 (1 Jan 2004)
2285 Protocol: 27 (changed)
2286 Changes since 2.5.7:
2290 * "ssh" is now the default remote shell for rsync. If you want to
2291 change this, configure like this: "./configure --with-rsh=rsh".
2293 * Added --files-from, --no-relative, --no-implied-dirs, and --from0.
2294 Note that --from0 affects the line-ending character for all the
2295 files read by the --*-from options. (Wayne Davison)
2297 * Length of csum2 is now per-file starting with protocol version
2300 * Per-file dynamic block size is now sqrt(file length). The
2301 per-file checksum size is determined according to an algorithm
2302 provided by Donovan Baarda which reduces the probability of rsync
2303 algorithm corrupting data and falling back using the whole md4
2304 checksums. (J.W. Schultz, Donovan Baarda)
2306 * The --stats option no longer includes the (debug) malloc summary
2307 unless the verbose option was specified at least twice.
2309 * Added a new error/warning code for when files vanish from the
2310 sending side. Made vanished source files not interfere with the
2311 file-deletion pass when --delete-after was specified.
2313 * Various trailing-info sections are now preceded by a newline.
2317 * Fixed several exclude/include matching bugs when using wild-cards.
2318 This has a several user-visible effects, all of which make the
2319 matching more consistent and intuitive. This should hopefully not
2320 cause anyone problems since it makes the matching work more like
2321 what people are expecting. (Wayne Davison)
2323 - A pattern with a "**" no longer causes a "*" to match slashes.
2324 For example, with "/*/foo/**", "foo" must be 2 levels deep.
2325 [If your string has BOTH "*" and "**" wildcards, changing the
2326 "*" wildcards to "**" will provide the old behavior in all
2329 - "**/foo" now matches at the base of the transfer (like /foo
2330 does). [Use "/**/foo" to get the old behavior in all versions.]
2332 - A non-anchored wildcard term floats to match beyond the base of
2333 the transfer. E.g. "CVS/R*" matches at the end of the path,
2334 just like the non-wildcard term "CVS/Root" does. [Use "/CVS/R*"
2335 to get the old behavior in all versions.]
2337 - Including a "**" in the match term causes it to be matched
2338 against the entire path, not just the name portion, even if
2339 there aren't any interior slashes in the term. E.g. "foo**bar"
2340 would exclude "/path/foo-bar" (just like before) as well as
2341 "/foo-path/baz-bar" (unlike before). [Use "foo*bar" to get the
2342 old behavior in all versions.]
2344 * The exclude list specified in the daemon's config file is now
2345 properly applied to the pulled items no matter how deep the
2346 user's file-args are in the source tree. (Wayne Davison)
2348 * For protocol version >= 27, mdfour_tail() is called when the
2349 block size (including checksum_seed) is a multiple of 64.
2350 Previously it was not called, giving the wrong MD4 checksum.
2353 * For protocol version >= 27, a 64 bit bit counter is used in
2354 mdfour.c as required by the RFC. Previously only a 32 bit bit
2355 counter was used, causing incorrect MD4 file checksums for
2356 file sizes >= 512MB - 4. (Craig Barratt)
2358 * Fixed a crash bug when interacting with older rsync versions and
2359 multiple files of the same name are destined for the same dir.
2362 * Keep tmp names from overflowing MAXPATHLEN.
2364 * Make --link-dest honor the absence of -p, -o, and -g.
2366 * Made rsync treat a trailing slash in the destination in a more
2369 * Fixed file I/O error detection. (John Van Essen)
2371 * Fixed bogus "malformed address {hostname}" message in rsyncd log
2372 when checking IP address against hostnames from "hosts allow"
2373 and "hosts deny" parameters in config file.
2375 * Print heap statistics when verbose >= 2 instead of when >= 1.
2377 * Fixed a compression (-z) bug when syncing a mostly-matching file
2378 that contains already-compressed data. (Yasuoka Masahiko and
2381 * Fixed a bug in the --backup code that could cause deleted files
2382 to not get backed up.
2384 * When the backup code makes new directories, create them with mode
2385 0700 instead of 0755 (since the directory permissions in the
2386 backup tree are not yet copied from the main tree).
2388 * Call setgroups() in a more portable manner.
2390 * Improved file-related error messages to better indicate exactly
2391 what pathname failed. (Wayne Davison)
2393 * Fixed some bugs in the handling of --delete and --exclude when
2394 using the --relative (-R) option. (Wayne Davison)
2396 * Fixed bug that prevented regular files from replacing
2397 special files and caused a directory in --link-dest or
2398 --compare-dest to block the creation of a file with the
2399 same path. A directory still cannot be replaced by a
2400 regular file unless --delete specified. (J.W. Schultz)
2402 * Detect and report when open or opendir succeed but read and
2403 readdir fail caused by network filesystem issues and truncated
2404 files. (David Norwood, Michael Brown, J.W. Schultz)
2406 * Added a fix that should give ssh time to restore the tty settings
2407 if the user presses Ctrl-C at an ssh password prompt.
2411 * Eliminated vestigial support for old versions that we stopped
2412 supporting. (J.W. Schultz)
2414 * Simplified some of the option-parsing code. (Wayne Davison)
2416 * Some cleanup made to the exclude code, as well as some new
2417 defines added to enhance readability. (Wayne Davison)
2419 * Changed the protocol-version code so that it can interact at a
2420 lower protocol level than the maximum supported by both sides.
2421 Added an undocumented option, --protocol=N, to force the value
2422 we advertise to the other side (primarily for testing purposes).
2426 NEWS for rsync 2.5.7 (4 Dec 2003)
2427 Protocol: 26 (unchanged)
2428 Changes since 2.5.6:
2432 * Fix buffer handling bugs. (Andrew Tridgell, Martin Pool, Paul
2433 Russell, Andrea Barisani)
2436 NEWS for rsync 2.5.6, aka "the dwd-between-jobs release" (26 Jan 2003)
2437 Protocol: 26 (unchanged)
2438 Changes since 2.5.5:
2442 * The --delete-after option now implies --delete. (Wayne Davison)
2444 * The --suffix option can now be used with --backup-dir. (Michael
2447 * Combining "::" syntax with the --rsh/-e option now uses the
2448 specified remote-shell as a transport to talk to a (newly-spawned)
2449 server-daemon. This allows someone to use daemon features, such
2450 as modules, over a secure protocol, such as ssh. (JD Paul)
2452 * The rsync:// syntax for daemon connections is now accepted in the
2455 * If the file name given to --include-from or --exclude-from is "-",
2456 rsync will read from standard input. (J.W. Schultz)
2458 * New option --link-dest which is like --compare-dest except that
2459 unchanged files are hard-linked in to the destination directory.
2462 * Don't report an error if an excluded file disappears during an
2463 rsync run. (Eugene Chupriyanov and Bo Kersey)
2465 * Added .svn to --cvs-exclude list to support subversion. (Jon
2468 * Properly support IPv6 addresses in the rsyncd.conf "hosts allow"
2469 and "hosts deny" fields. (Hideaki Yoshifuji)
2471 * Changed exclude file handling to permit DOS or MAC style line
2472 terminations. (J.W. Schultz)
2474 * Ignore errors from chmod when -p/-a/--preserve-perms is not set.
2479 * Fix "forward name lookup failed" errors on AIX 4.3.3. (John
2480 L. Allen, Martin Pool)
2482 * Generate each file's rolling-checksum data as we send it, not
2483 in a separate (memory-eating) pass before hand. This prevents
2484 timeout errors on really large files. (Stefan Nehlsen)
2486 * Fix compilation on Tru64. (Albert Chin, Zoong Pham)
2488 * Better handling of some client-server errors. (Martin Pool)
2490 * Fixed a crash that would occur when sending a list of files that
2491 contains a duplicate name (if it sorts to the end of the file
2492 list) and using --delete. (Wayne Davison)
2494 * Fixed the file-name duplicate-removal code when dealing with multiple
2495 dups in a row. (Wayne Davison)
2497 * Fixed a bug that caused rsync to lose the exit status of its child
2498 processes and sometimes return an exit code of 0 instead of showing
2499 an error. (David R. Staples, Dave Dykstra)
2501 * Fixed bug in --copy-unsafe-links that caused it to be completely
2502 broken. (Dave Dykstra)
2504 * Prevent infinite recursion in cleanup code under certain circumstances.
2505 (Sviatoslav Sviridov and Marc Espie)
2507 * Fixed a bug that prevented rsync from creating intervening directories
2508 when --relative-paths/-R is set. (Craig Barratt)
2510 * Prevent "Connection reset by peer" messages from Cygwin. (Randy O'Meara)
2514 * Many code cleanups and improved internal documentation. (Martin
2517 * Portability fixes. (Dave Dykstra and Wayne Davison)
2519 * More test cases. (Martin Pool)
2521 * Some test-case fixes. (Brian Poole, Wayne Davison)
2523 * Updated included popt to the latest vendor drop, version 1.6.4.
2526 * Updated config.guess and config.sub to latest versions; this
2527 means rsync should build on more platforms. (Paul Green)
2530 NEWS for rsync 2.5.5, aka Snowy River (2 Apr 2002)
2531 Protocol: 26 (unchanged)
2532 Changes since 2.5.4:
2536 * With --progress, when a transfer is complete show the time taken;
2537 otherwise show expected time to complete. (Cameron Simpson)
2539 * Make "make install-strip" works properly, and "make install"
2540 accepts a DESTDIR variable for help in building binary packages.
2541 (Peter Breitenlohner, Greg Louis)
2543 * If configured with --enable-maintainer-mode, then on receipt of
2544 a fatal signal rsync will try to open an xterm running gdb,
2545 similarly to Samba's "panic action" or GNOME's bug-buddy.
2551 * Fix situation where failure to fork (e.g. because out of process
2552 slots) would cause rsync to kill all processes owned by the
2553 current user. Yes, really! (Paul Haas, Martin Pool)
2555 * Fix test suite on Solaris. (Jos Backus, Martin Pool)
2557 * Fix minor memory leak in socket code. (Dave Dykstra, Martin
2560 * Fix --whole-file problem that caused it to be the default even
2561 for remote connections. (Martin Pool, Frank Schulz)
2563 * Work around bug in Mac OS X mkdir(2), which cannot handle
2565 <http://www.opensource.apple.com/bugs/X/BSD%20Kernel/2734739.html>
2568 * Improved network error handling. (Greg A. Woods)
2571 NEWS for rsync 2.5.4, aka "Imitation lizard skin" (13 Mar 2002)
2572 Protocol: 26 (unchanged)
2573 Changes since 2.5.3:
2577 * Additional fix for zlib double-free bug. (Martin Pool, Andrew
2578 Tridgell) (CVE CAN-2002-0059)
2582 * Merge in changes from zlib 1.1.3 to zlib 1.1.4. (Jos Backus)
2583 (Note that rsync still uses a custom version of zlib; you can
2584 not just link against a system library. See zlib/README.rsync)
2586 * Additional test cases for --compress. (Martin Pool)
2589 NEWS for rsync 2.5.3, aka "Happy 26" (11 Mar 2002)
2590 Protocol: 26 (unchanged)
2591 Changes since 2.5.2:
2595 * Make sure that supplementary groups are removed from a server
2596 process after changing uid and gid. (Ethan Benson) (Debian bug
2597 #132272, CVE CAN-2002-0080)
2601 * Fix zlib double-free bug. (Owen Taylor, Mark J Cox) (CVE
2604 * Fixed problem that in many cases caused the error message
2605 unexpected read size of 0 in map_ptr
2606 and resulted in the wrong data being copied.
2608 * Fixed compilation errors on some systems caused by the use of
2609 "unsigned int64" in rsync.h.
2611 * Fixed problem on systems such as Sunos4 that do not support realloc
2612 on a NULL pointer; error was "out of memory in flist_expand".
2614 * Fix for rsync server processes hanging around after the client
2615 unexpectedly disconnects. (Colin Walters) (Debian bug #128632)
2617 * Cope with BSD systems on which mkdir() will not accept a trailing
2622 * Merge in changes from zlib 1.1.2 to zlib 1.1.3. (Note that
2623 rsync still uses a custom version of zlib; you can not just link
2624 against a system library. See zlib/README.rsync)
2626 * Command to initiate connections is only shown with -vv, rather
2627 than -v as in 2.5.2. Output from plain -v is more similar to
2628 what was historically used so as not to break scripts that try
2629 to parse the output.
2631 * Added --no-whole-file and --no-blocking-io options (Dave Dykstra)
2633 * Made the --write-batch and --read-batch options actually work
2634 and added documentation in the man page (Jos Backus)
2636 * If the daemon is unable to fork a child to accept a connection,
2637 print an error message. (Colin Walters)
2640 NEWS for rsync 2.5.2 (26 Jan 2002)
2641 Protocol: 26 (changed)
2642 Changes since 2.5.1:
2646 * Signedness security patch from Sebastian Krahmer
2647 <krahmer@suse.de> -- in some cases we were not sufficiently
2648 careful about reading integers from the network.
2652 * Fix possible string mangling in log files.
2654 * Fix for setting local address of outgoing sockets.
2656 * Better handling of hardlinks and devices on platforms with
2657 64-bit dev_t or ino_t.
2659 * Name resolution on machines supporting IPv6 is improved.
2661 * Fix for device nodes. (dann frazier) (Debian #129135)
2665 * With -v, rsync now shows the command used to initiate an ssh/rsh
2668 * --statistics now shows memory heap usage on platforms that
2671 * "The Ted T'so school of program optimization": make progress
2672 visible and people will think it's faster. (With --progress,
2673 rsync will show you how many files it has seen as it builds the
2674 file_list, giving some indication that it has not hung.)
2676 * Improvements to batch mode support. This is still experimental
2677 but testing would be welcome. (Jos Backus)
2679 * New --ignore-existing option, patch previously distributed with
2680 Vipul's Razor. (Debian #124286)
2683 NEWS for rsync 2.5.1 (3 Jan 2002)
2684 Protocol: 25 (unchanged)
2685 Changes since 2.5.0:
2689 * Fix for segfault in --daemon mode configuration parser. (Paul
2692 * Correct string<->address parsing for both IPv4 and 6.
2693 (YOSHIFUJI Hideaki, SUMIKAWA Munechika and Jun-ichiro "itojun"
2696 * Various fixes for IPv6 support. (Dave Dykstra)
2698 * rsync.1 typo fix. (Matt Kraai)
2700 * Test suite typo fixes. (Tom Schmidt)
2702 * rsync.1 grammar and clarity improvements. (Edward
2705 * Correction to ./configure tests for inet_ntop. (Jeff Garzik)
2709 * --progress and -P now show estimated data transfer rate (in a
2710 multiple of bytes/s) and estimated time to completion. (Rik
2713 * --no-detach option, required to run as a W32 service and also
2714 useful when running on Unix under daemontools, AIX's SRC, or a
2715 debugger. (Max Bowsher, Jos Backus)
2717 * Clearer error messages for some conditions.
2720 NEWS for rsync 2.5.0 (30 Nov 2001)
2721 Protocol: 25 (changed)
2722 Changes since 2.4.6:
2726 * Martin Pool <mbp@samba.org> is now a co-maintainer.
2730 * Support for LSB-compliant packaging <http://www.linuxbase.org/>
2732 * Shell wildcards are allowed in "auth users" lines.
2734 * Merged UNC rsync+ patch to support creation of standalone patch
2735 sets. By Bert J. Dempsey and Debra Weiss, updated by Jos
2736 Backus. <http://www.ils.unc.edu/i2dsi/unc_rsync+.html>
2738 * IPv6 support based on a patch from KAME.net, on systems
2739 including modern versions of Linux, Solaris, and HP-UX. Also
2740 includes IPv6 compatibility functions for old OSs by the
2741 Internet Software Consortium, Paul Vixie, the OpenSSH
2742 portability project, and OpenBSD.
2746 * Include/exclude cluestick: with -vv, print out whether files are
2747 included or excluded and why.
2749 * Many error messages have more friendly explanations and more
2752 * Manual page improvements plus scanty protocol documentation.
2754 * When running as --daemon in the background and using a "log
2755 file" rsyncd.conf directive, close the log file every time it is
2756 open when going to sleep on the socket. This allows the log
2757 file to get cleaned out by another process.
2759 * Change to using libpopt rather than getopt for processing
2760 options. This makes the code cleaner and the behaviour more
2761 consistent across platforms. popt is included and built if not
2762 installed on the platform.
2764 * More details in --version, including note about whether 64-bit
2765 files, symlinks and hardlinks are supported.
2767 * MD4 code may use less CPU cycles.
2769 * Use mkstemp on systems where it is secure. If we use mktemp,
2770 explain that we do it in a secure way.
2772 * --whole-file is the default when source and target are on the
2777 * Fix for various bugs causing rsync to hang.
2779 * Attempt to fix Large File Summit support on AIX.
2781 * Attempt to fix error handling lockup bug.
2783 * Give a non-0 exit code if *any* of the files we have been asked
2784 to transfer fail to transfer.
2786 * For log messages containing ridiculously long strings that might
2787 overflow a buffer rsync no longer aborts, but rather prints an
2788 ellipsis at the end of the string. (Patch from Ed Santiago.)
2792 * Improved support for UNICOS (tested on Cray T3E and Cray SV1)
2794 * autoconf2.52 (or later) is now required to rebuild the autoconf
2795 scripts. It is not required to simply build rsync.
2797 * Platforms thought to work in this release:
2799 Cray SV1 UNICOS 10.0.0.8 cc
2800 Debian Linux 2.2 UltraSparc gcc
2801 Debian Linux testing/unstable ARM gcc
2802 FreeBSD 3.3-RELEASE i386 cc
2803 FreeBSD 4.1.1-RELEASE i386 cc
2804 FreeBSD 4.3-STABLE i386 cc
2805 HP PA-RISC HP-UX 10.20 gcc
2806 HP PA-RISC HP-UX 11.11 cc
2809 Mac OS X PPC (--disable-ipv6) cc
2811 NetBSD Current i386 cc
2812 OpenBSD 2.5 Sparc gcc
2814 OpenBSD Current i386 cc
2816 RedHat 6.2 i386 insure++
2818 RedHat 7.1 i386 (Kernel 2.4.10) gcc
2819 Slackware 8.0 i686 (Kernel 2.4.10)
2820 Solaris 8 UltraSparc cc
2821 Solaris 8 UltraSparc gcc
2823 SuSE 7.1 i386 gcc2.95.2
2824 SuSE 7.1 ppc gcc2.95.2
2825 i386-pc-sco3.2v5.0.5 cc
2826 i386-pc-sco3.2v5.0.5 gcc
2827 powerpc-ibm-aix4.3.3.0 cc
2828 i686-unknown-sysv5UnixWare7.1.0 gcc
2829 i686-unknown-sysv5UnixWare7.1.0 cc
2833 * The existing test.sh script by Phil Hands has been merged into a
2834 test framework that works from both "make check" and the Samba
2837 Partial Protocol History
2838 RELEASE DATE VER. DATE OF COMMIT* PROTOCOL
2839 ?? ??? 2008 3.1.0 30
2840 29 Jun 2008 3.0.3 30
2841 08 Apr 2008 3.0.2 30
2842 03 Apr 2008 3.0.1 30
2843 01 Mar 2008 3.0.0 11 Nov 2006 30
2844 06 Nov 2006 2.6.9 29
2845 22 Apr 2006 2.6.8 29
2846 11 Mar 2006 2.6.7 29
2847 28 Jul 2005 2.6.6 29
2848 01 Jun 2005 2.6.5 29
2849 30 Mar 2005 2.6.4 17 Jan 2005 29
2850 30 Sep 2004 2.6.3 28
2851 30 Apr 2004 2.6.2 28
2852 26 Apr 2004 2.6.1 08 Jan 2004 28
2853 01 Jan 2004 2.6.0 10 Apr 2003 27 (MAX=40)
2854 04 Dec 2003 2.5.7 26
2855 26 Jan 2003 2.5.6 26
2856 02 Apr 2002 2.5.5 26
2857 13 Mar 2002 2.5.4 26
2858 11 Mar 2002 2.5.3 26
2859 26 Jan 2002 2.5.2 11 Jan 2002 26
2860 03 Jan 2002 2.5.1 25
2861 30 Nov 2001 2.5.0 23 Aug 2001 25
2862 06 Sep 2000 2.4.6 24
2863 19 Aug 2000 2.4.5 24
2864 29 Jul 2000 2.4.4 24
2865 09 Apr 2000 2.4.3 24
2866 30 Mar 2000 2.4.2 24
2867 30 Jan 2000 2.4.1 29 Jan 2000 24
2868 29 Jan 2000 2.4.0 28 Jan 2000 23
2869 25 Jan 2000 2.3.3 23 Jan 2000 22
2870 08 Nov 1999 2.3.2 26 Jun 1999 21
2871 06 Apr 1999 2.3.1 20
2872 15 Mar 1999 2.3.0 15 Mar 1999 20
2873 25 Nov 1998 2.2.1 19
2874 03 Nov 1998 2.2.0 19
2875 09 Sep 1998 2.1.1 19
2876 20 Jul 1998 2.1.0 19
2877 17 Jul 1998 2.0.19 19
2878 18 Jun 1998 2.0.17 19
2879 01 Jun 1998 2.0.16 19
2880 27 May 1998 2.0.13 27 May 1998 19
2881 26 May 1998 2.0.12 18
2882 22 May 1998 2.0.11 18
2883 18 May 1998 2.0.9 18 May 1998 18
2884 17 May 1998 2.0.8 17
2885 15 May 1998 2.0.1 17
2886 14 May 1998 2.0.0 17
2887 17 Apr 1998 1.7.4 17
2888 13 Apr 1998 1.7.3 17
2889 05 Apr 1998 1.7.2 17
2890 26 Mar 1998 1.7.1 17
2891 26 Mar 1998 1.7.0 26 Mar 1998 17 (MAX=30)
2892 13 Jan 1998 1.6.9 13 Jan 1998 15 (MAX=20)
2894 * DATE OF COMMIT is the date the protocol change was committed to CVS.
Matt McCutchen's Web Site / rsync / rsync.git / blob