X-Git-Url: https://mattmccutchen.net/rsync/rsync-patches.git/blobdiff_plain/76c553f74d8a10a1e2f8ac39a091d390f27a4865..d4dd2dd52f48a66395428810389ef31cc0488db7:/flags.diff diff --git a/flags.diff b/flags.diff index e60248c..6bfabb1 100644 --- a/flags.diff +++ b/flags.diff @@ -22,12 +22,12 @@ To use this patch, run these commands for a successful build: #endif /* These index values are for the file-list's extra-attribute array. */ --int uid_ndx, gid_ndx, acls_ndx, xattrs_ndx; -+int uid_ndx, gid_ndx, fileflags_ndx, acls_ndx, xattrs_ndx; - #ifdef ICONV_OPTION - int ic_ndx; +-int uid_ndx, gid_ndx, acls_ndx, xattrs_ndx, unsort_ndx; ++int uid_ndx, gid_ndx, fileflags_ndx, acls_ndx, xattrs_ndx, unsort_ndx; -@@ -125,6 +126,8 @@ void setup_protocol(int f_out,int f_in) + #ifdef ICONV_OPTION + int filesfrom_convert = 0; +@@ -124,6 +125,8 @@ void setup_protocol(int f_out,int f_in) uid_ndx = ++file_extra_cnt; if (preserve_gid) gid_ndx = ++file_extra_cnt; @@ -38,7 +38,7 @@ To use this patch, run these commands for a successful build: if (preserve_xattrs) --- old/configure.in +++ new/configure.in -@@ -557,7 +557,7 @@ AC_CHECK_FUNCS(waitpid wait4 getcwd strd +@@ -544,7 +544,7 @@ AC_CHECK_FUNCS(waitpid wait4 getcwd strd memmove lchown vsnprintf snprintf vasprintf asprintf setsid glob strpbrk \ strlcat strlcpy strtol mallinfo getgroups setgroups geteuid getegid \ setlocale setmode open64 lseek64 mkstemp64 mtrace va_copy __va_copy \ @@ -57,7 +57,7 @@ To use this patch, run these commands for a successful build: extern int uid_ndx; extern int gid_ndx; extern int eol_nulls; -@@ -335,6 +336,9 @@ static void send_file_entry(int f, struc +@@ -339,6 +340,9 @@ static void send_file_entry(int f, struc { static time_t modtime; static mode_t mode; @@ -67,7 +67,7 @@ To use this patch, run these commands for a successful build: #ifdef SUPPORT_HARD_LINKS static int64 dev; #endif -@@ -393,6 +397,12 @@ static void send_file_entry(int f, struc +@@ -397,6 +401,12 @@ static void send_file_entry(int f, struc xflags |= XMIT_SAME_MODE; else mode = file->mode; @@ -80,7 +80,7 @@ To use this patch, run these commands for a successful build: if ((preserve_devices && IS_DEVICE(mode)) || (preserve_specials && IS_SPECIAL(mode))) { -@@ -513,6 +523,10 @@ static void send_file_entry(int f, struc +@@ -517,6 +527,10 @@ static void send_file_entry(int f, struc } if (!(xflags & XMIT_SAME_MODE)) write_int(f, to_wire_mode(mode)); @@ -91,7 +91,7 @@ To use this patch, run these commands for a successful build: if (uid_ndx && !(xflags & XMIT_SAME_UID)) { if (protocol_version < 30) write_int(f, uid); -@@ -601,6 +615,9 @@ static struct file_struct *recv_file_ent +@@ -605,6 +619,9 @@ static struct file_struct *recv_file_ent { static int64 modtime; static mode_t mode; @@ -101,7 +101,7 @@ To use this patch, run these commands for a successful build: #ifdef SUPPORT_HARD_LINKS static int64 dev; #endif -@@ -732,9 +749,12 @@ static struct file_struct *recv_file_ent +@@ -736,9 +753,12 @@ static struct file_struct *recv_file_ent } if (!(xflags & XMIT_SAME_MODE)) mode = from_wire_mode(read_int(f)); @@ -115,7 +115,7 @@ To use this patch, run these commands for a successful build: if (uid_ndx && !(xflags & XMIT_SAME_UID)) { if (protocol_version < 30) -@@ -854,6 +874,10 @@ static struct file_struct *recv_file_ent +@@ -858,6 +878,10 @@ static struct file_struct *recv_file_ent OPT_EXTRA(file, 0)->unum = (uint32)(file_length >> 32); } file->mode = mode; @@ -139,7 +139,7 @@ To use this patch, run these commands for a successful build: if (gid_ndx) --- old/generator.c +++ new/generator.c -@@ -114,6 +114,14 @@ static int need_retouch_dir_times; +@@ -112,6 +112,14 @@ static int need_retouch_dir_times; static int need_retouch_dir_perms; static const char *solo_file = NULL; @@ -154,7 +154,7 @@ To use this patch, run these commands for a successful build: /* For calling delete_item() and delete_dir_contents(). */ #define DEL_RECURSE (1<<1) /* recurse */ #define DEL_DIR_IS_EMPTY (1<<2) /* internal delete_FUNCTIONS use only */ -@@ -129,7 +137,6 @@ enum delret { +@@ -127,7 +135,6 @@ enum delret { /* Forward declaration for delete_item(). */ static enum delret delete_dir_contents(char *fname, int flags); @@ -162,7 +162,7 @@ To use this patch, run these commands for a successful build: static int is_backup_file(char *fn) { int k = strlen(fn) - backup_suffix_len; -@@ -142,17 +149,20 @@ static int is_backup_file(char *fn) +@@ -140,17 +147,20 @@ static int is_backup_file(char *fn) * Note that fbuf must point to a MAXPATHLEN buffer if the mode indicates it's * a directory! (The buffer is used for recursion, but returned unchanged.) */ @@ -186,7 +186,7 @@ To use this patch, run these commands for a successful build: if (S_ISDIR(mode) && !(flags & DEL_DIR_IS_EMPTY)) { ignore_perishable = 1; /* If DEL_RECURSE is not set, this just reports emptiness. */ -@@ -264,7 +274,7 @@ static enum delret delete_dir_contents(c +@@ -262,7 +272,7 @@ static enum delret delete_dir_contents(c if (S_ISDIR(fp->mode) && delete_dir_contents(fname, flags | DEL_RECURSE) != DR_SUCCESS) ret = DR_NOT_EMPTY; @@ -195,8 +195,8 @@ To use this patch, run these commands for a successful build: ret = DR_NOT_EMPTY; } -@@ -320,8 +330,9 @@ static int remember_delete(struct file_s - +@@ -318,8 +328,9 @@ static int remember_delete(struct file_s + while (1) { len = snprintf(deldelay_buf + deldelay_cnt, - deldelay_size - deldelay_cnt, @@ -207,7 +207,7 @@ To use this patch, run these commands for a successful build: if ((deldelay_cnt += len) <= deldelay_size) break; if (deldelay_fd < 0 && !start_delete_delay_temp()) -@@ -334,7 +345,7 @@ static int remember_delete(struct file_s +@@ -332,7 +343,7 @@ static int remember_delete(struct file_s return 1; } @@ -216,7 +216,7 @@ To use this patch, run these commands for a successful build: { static int read_pos = 0; int j, len, mode; -@@ -376,12 +387,12 @@ static int read_delay_line(char *buf) +@@ -374,12 +385,12 @@ static int read_delay_line(char *buf) bp = deldelay_buf + read_pos; @@ -231,7 +231,7 @@ To use this patch, run these commands for a successful build: len = j - read_pos - (past_space - bp) + 1; /* count the '\0' */ read_pos = j + 1; -@@ -399,15 +410,15 @@ static int read_delay_line(char *buf) +@@ -397,15 +408,15 @@ static int read_delay_line(char *buf) static void do_delayed_deletions(char *delbuf) { @@ -250,7 +250,7 @@ To use this patch, run these commands for a successful build: if (deldelay_fd >= 0) close(deldelay_fd); } -@@ -474,7 +485,7 @@ static void delete_in_dir(char *fbuf, st +@@ -472,7 +483,7 @@ static void delete_in_dir(char *fbuf, st if (!remember_delete(fp, delbuf)) break; } else @@ -259,7 +259,7 @@ To use this patch, run these commands for a successful build: } } -@@ -1263,7 +1274,7 @@ static void recv_generator(char *fname, +@@ -1296,7 +1307,7 @@ static void recv_generator(char *fname, * full later (right before we handle its contents). */ if (statret == 0 && (S_ISDIR(sx.st.st_mode) @@ -268,7 +268,7 @@ To use this patch, run these commands for a successful build: goto cleanup; /* Any errors get reported later. */ if (do_mkdir(fname, file->mode & 0700) == 0) file->flags |= FLAG_DIR_CREATED; -@@ -1275,7 +1286,7 @@ static void recv_generator(char *fname, +@@ -1308,7 +1319,7 @@ static void recv_generator(char *fname, * we need to delete it. If it doesn't exist, then * (perhaps recursively) create it. */ if (statret == 0 && !S_ISDIR(sx.st.st_mode)) { @@ -277,7 +277,7 @@ To use this patch, run these commands for a successful build: goto skipping_dir_contents; statret = -1; } -@@ -1404,7 +1415,7 @@ static void recv_generator(char *fname, +@@ -1437,7 +1448,7 @@ static void recv_generator(char *fname, } /* Not the right symlink (or not a symlink), so * delete it. */ @@ -286,7 +286,7 @@ To use this patch, run these commands for a successful build: goto cleanup; } else if (basis_dir[0] != NULL) { int j = try_dests_non(file, fname, ndx, fnamecmpbuf, &sx, -@@ -1483,7 +1494,7 @@ static void recv_generator(char *fname, +@@ -1516,7 +1527,7 @@ static void recv_generator(char *fname, goto return_with_success; goto cleanup; } @@ -295,7 +295,7 @@ To use this patch, run these commands for a successful build: goto cleanup; } else if (basis_dir[0] != NULL) { int j = try_dests_non(file, fname, ndx, fnamecmpbuf, &sx, -@@ -1574,7 +1585,7 @@ static void recv_generator(char *fname, +@@ -1607,7 +1618,7 @@ static void recv_generator(char *fname, fnamecmp_type = FNAMECMP_FNAME; if (statret == 0 && !S_ISREG(sx.st.st_mode)) { @@ -501,7 +501,7 @@ To use this patch, run these commands for a successful build: /* These flags are used in the live flist data. */ -@@ -435,6 +436,10 @@ typedef unsigned int size_t; +@@ -441,6 +442,10 @@ typedef unsigned int size_t; #endif #endif @@ -512,7 +512,7 @@ To use this patch, run these commands for a successful build: /* Find a variable that is either exactly 32-bits or longer. * If some code depends on 32-bit truncation, it will need to * take special action in a "#if SIZEOF_INT32 > 4" section. */ -@@ -602,6 +607,7 @@ extern int file_extra_cnt; +@@ -608,6 +613,7 @@ extern int file_extra_cnt; extern int inc_recurse; extern int uid_ndx; extern int gid_ndx; @@ -520,14 +520,14 @@ To use this patch, run these commands for a successful build: extern int acls_ndx; extern int xattrs_ndx; -@@ -639,6 +645,7 @@ extern int xattrs_ndx; +@@ -645,6 +651,7 @@ extern int xattrs_ndx; /* When the associated option is on, all entries will have these present: */ #define F_OWNER(f) REQ_EXTRA(f, uid_ndx)->unum #define F_GROUP(f) REQ_EXTRA(f, gid_ndx)->unum +#define F_FFLAGS(f) REQ_EXTRA(f, fileflags_ndx)->unum #define F_ACL(f) REQ_EXTRA(f, acls_ndx)->num #define F_XATTR(f) REQ_EXTRA(f, xattrs_ndx)->num - #define F_NDX(f) REQ_EXTRA(f, ic_ndx)->num + #define F_NDX(f) REQ_EXTRA(f, unsort_ndx)->num --- old/rsync.yo +++ new/rsync.yo @@ -338,6 +338,7 @@ to the detailed description below for a @@ -549,7 +549,7 @@ To use this patch, run these commands for a successful build: dit(--no-OPTION) You may turn off one or more implied options by prefixing the option name with "no-". Not all options may be prefixed with a "no-": -@@ -900,6 +903,13 @@ super-user copies all namespaces except +@@ -908,6 +911,13 @@ super-user copies all namespaces except the user.* namespace. To be able to backup and restore non-user namespaces as a normal user, see the bf(--fake-super) option.